[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] trouble with



I'm trying to setup a windows 7 dom-u. 
When i start it i get the following: 

root@xen:/etc/xen# xl create mc01.cfg
Parsing config from mc01.cfg
xc: info: VIRTUAL MEMORY ARRANGEMENT:
  Loader:        0000000000100000->000000000019bee4
  TOTAL:         0000000000000000->000000007f000000
  ENTRY ADDRESS: 0000000000100000
xc: info: PHYSICAL MEMORY ALLOCATION:
  4KB PAGES: 0x0000000000000200
  2MB PAGES: 0x00000000000003f7
  1GB PAGES: 0x0000000000000000
libxl: error: libxl_dm.c:1203:device_model_spawn_outcome: domain 4 device model: spawn failed (rc=-3)
libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge add [9922] exited with error status 255
libxl: error: libxl_create.c:1114:domcreate_attach_pci: unable to add nic devices
libxl: error: libxl_dm.c:1236:libxl__destroy_device_model: Device Model already exited

It looks like there is a problem with adding a  nic to the machine. 

this is my bridge status:
root@xen:/etc/xen# /etc/xen/scripts/network-bridge status 
============================================================
4: xenbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:25:90:79:42:42 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.10/24 brd 192.168.0.255 scope global xenbr0
    inet6 fe80::225:90ff:fe79:4242/64 scope link 
       valid_lft forever preferred_lft forever
4: xenbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:25:90:79:42:42 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.10/24 brd 192.168.0.255 scope global xenbr0
    inet6 fe80::225:90ff:fe79:4242/64 scope link 
       valid_lft forever preferred_lft forever
 
bridge name bridge id STP enabled interfaces
xenbr0 8000.002590794242 no eth0
 
default via 192.168.0.1 dev xenbr0 
192.168.0.0/24 dev xenbr0  proto kernel  scope link  src 192.168.0.10 
 
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 xenbr0
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 xenbr0
============================================================
root@xen:/etc/xen# xl create mc01.cfg
Parsing config from mc01.cfg
xc: info: VIRTUAL MEMORY ARRANGEMENT:
  Loader:        0000000000100000->000000000019bee4
  TOTAL:         0000000000000000->000000007f000000
  ENTRY ADDRESS: 0000000000100000
xc: info: PHYSICAL MEMORY ALLOCATION:
  4KB PAGES: 0x0000000000000200
  2MB PAGES: 0x00000000000003f7
  1GB PAGES: 0x0000000000000000
libxl: error: libxl_dm.c:1203:device_model_spawn_outcome: domain 4 device model: spawn failed (rc=-3)
libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge add [9922] exited with error status 255
libxl: error: libxl_create.c:1114:domcreate_attach_pci: unable to add nic devices
libxl: error: libxl_dm.c:1236:libxl__destroy_device_model: Device Model already exited
root@xen:/etc/xen# /etc/xen/scripts/network-bridge status 
============================================================
4: xenbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:25:90:79:42:42 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.10/24 brd 192.168.0.255 scope global xenbr0
    inet6 fe80::225:90ff:fe79:4242/64 scope link 
       valid_lft forever preferred_lft forever
4: xenbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:25:90:79:42:42 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.10/24 brd 192.168.0.255 scope global xenbr0
    inet6 fe80::225:90ff:fe79:4242/64 scope link 
       valid_lft forever preferred_lft forever
 
bridge name bridge id STP enabled interfaces
xenbr0 8000.002590794242 no eth0
 
default via 192.168.0.1 dev xenbr0 
192.168.0.0/24 dev xenbr0  proto kernel  scope link  src 192.168.0.10 
 
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 xenbr0
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 xenbr0
============================================================


i'm running: this on: 
(XEN) Xen version 4.3-unstable (root@xxxxxxxxxx) (gcc (Debian 4.4.5-8) 4.4.5) Tue Oct  9 21:30:45 CEST 2012
(XEN) Latest ChangeSet: Mon Oct 08 11:45:36 2012 +0100 26004:099589002239
(XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1
(XEN) Command line: placeholder dom0_max_vcpus=2 dom0_mem=1024M,max:1024M xen-pciback.passthrough=1 xen-pciback.hide=(01:00.0)(02:00.0)(02:00.1)(00:1a.0)(00:
1d.0)

Any ideas how to get this to work? 

Thanks in advance for your adivce, 
Donald
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.