[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] XCP 1.6 on Intel Modular Server MFSYS25 NIC detect problem.


  • To: xen-users@xxxxxxxxxxxxx
  • From: Rodrigo Jorge <rlljorge@xxxxxxxxx>
  • Date: Thu, 10 Jan 2013 12:30:15 -0200
  • Delivery-date: Thu, 10 Jan 2013 14:31:20 +0000
  • List-id: Xen user discussion <xen-users.lists.xen.org>

I trying to install the XCP 1.6 ISO Image in hardware Intel Modular Server MFSYS25v1.
The server has 4 NIC's during installation, but are not detected.
In this same model of server have installed a xenserver 5.6 and the nic's are detected correctly, see below:

[Root @ vms01 ~] # lspci | grep Ethe
05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)
05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)
08:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
08:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
[Root @ vms01 ~] #

[Root @ vms01 ~] # cat / etc / modprobe.conf
alias eth0 e1000e
alias eth2 e1000e
alias eth1 e1000e
alias eth3 e1000e
[Root @ vms01 ~] #

[Root @ vms01 ~] # modinfo e1000e
filename: / lib/modules/2.6.32.12-0.7.1.xs5.6.100.327.170613xen/kernel/drivers/net/e1000e/e1000e.ko
version: 1.2.8-NAPI
license: GPL
description: Intel (R) PRO/1000 Network Driver
author: Intel Corporation, <linux.nics@xxxxxxxxx>


[Root @ vms01 ~] # ethtool eth0, ethtool eth1; ethtool eth2; ethtool eth3
Settings for eth0:
        Supported ports: [FIBRE]
        Supported link modes: 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes: 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb / s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: pumbag
        Wake-on: g
        Current message level: 0x00000001 (1)
        Link detected: yes
Settings for eth1:
        Supported ports: [FIBRE]
        Supported link modes: 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes: 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb / s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: pumbag
        Wake-on: g
        Current message level: 0x00000001 (1)
        Link detected: yes
Settings for eth2:
        Supported ports: [FIBRE]
        Supported link modes: 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes: 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb / s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: pumbag
        Wake-on: g
        Current message level: 0x00000001 (1)
        Link detected: yes
Settings for eth3:
        Supported ports: [FIBRE]
        Supported link modes: 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes: 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb / s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: d
        Wake-on: d
        Current message level: 0x00000001 (1)
        Link detected: yes
[Root @ vms01 ~] #

Any tips?
Thank you
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.