[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] powerdown problem on XEN

On Wed, 2013-08-14 at 09:29 +0200, Atom2 wrote:
> Thanks for your reply. I'll do as suggested and take it to xen-devel.
> I assume my best best would be to start afresh there with a brief 
> summary of the problem?

Yes, and maybe mention ACPI S5 in the subject.

If you have time then testing a newer Xen first would be useful, at
least the latest 4.2.x but better 4.3 or unstable.

NB you just need to build and boot the new xen.gz to test this, since
tools aren't involved you don't need all the userspace gubbins. I think
"make install-xen" in the newer tree will do the trick, or "make
dist-xen"/"make xen" plus manually copy to /boot etc.

> Thanks again
> Am 14.08.13 09:24, schrieb Ian Campbell:
> > On Wed, 2013-08-14 at 01:36 +0200, Atom2 wrote:
> >> I hope that might provide you with some more information which I could
> >> use to make a step forward.
> >
> > Perhaps the console device is one which was powered down so you don't
> > get any further output?
> >
> >> On the other hand I might be completely on the wrong track as I have no
> >> clue where the actual requested power-down (or as is: reboot) actually
> >> happens. That was not obvious for me from the code in power.c without
> >> further knowledge ...
> >
> > TBH this ACPI stuff and reboot etc is not an area of Xen which I am all
> > that familiar with either. I think it is worth taking what you have
> > learned to xen-devel@. According to MAINTAINERS you could also CC
> > jbeulich@xxxxxxxxx
> >
> > Ian.
> >
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxx
> http://lists.xen.org/xen-users

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.