Xen project Mailing List

You stated that the error you are getting is "Could not find kernel image" if you are missing a driver for hard drive controler you would get error message that states could not find root partition.

look into /boot see what files are there and then edit /boot/grub/grub.cfg

on mine install of centos 6.4 xcp grub.cfg was pointing to / instead of /boot

Mine grub.cfg is

multiboot /boot/xen-4.4-unstable.gz dom0_mem=1024M,max:1024M loglvl=all guest_loglvl=all elevator=noop iommu=0 cpufreq=dom0-kernel cpuidle

module /boot/vmlinuz-linux-xen root=UUID=4f7314c5-fa15-4b3e-9c37-2543f9f26ab6 ro iommu=no-intremap quiet

module /boot/initramfs-linux-xen.img

On Sun, Sep 22, 2013 at 11:56 AM, mitch@xxxxxxxxxxxx <mitch@xxxxxxxxxxxx> wrote:

Do you know what the correct setting is? Presumably i could correct that from the rescue boot.

I was able to reproduce the issue with the latest xenserver install disk as well - so I suspect Errol is on the right track - there might be a driver in the bootable iso which is missing from the installed boot process.

I just need to know how to identify that & fix it.

The intel scrs16 seems to be an lsi megaraid with intel brand.

I can read the installed gpt partition both in xenserver / advanced /shell bot & other rescue options so it seems to work until the installed bootloader process tries to access it.

That seems to be where the missing link is?

Thanks!

M


jacek burghardt <jaceksburghardt@xxxxxxxxx> wrote:
I belive there Is a bug in xcp centos 6.4 were xen.tar.gz is pointing to wrong folder. I had to correct menu entry to add /boot If I was you I would either boot from rescue disk and check that grub2 config file is pointing to right files and location or edit grub at boot time. I believe xcp is really buggy when I played with it there was no way to create lvm based storage pool.

On Sun, Sep 22, 2013 at 10:21 AM, mitch@xxxxxxxxxxxx <mitch@xxxxxxxxxxxx> wrote:

That's true - hadn't thought of it in working days tobe honest owing to how big I'd presumed the community was - with time shifts and so on :-) but good point. Thanks Ian!
M

----- Original Message -----
From: Ian Campbell [mailto:Ian.Campbell@xxxxxxxxxx]
Sent: Sunday, September 22, 2013 07:05 AM
To: Mitch (BitBlock)
Cc: Xen-users@xxxxxxxxxxxxx <Xen-users@xxxxxxxxxxxxx>
Subject: Re: [Xen-users] fresh xcp 1.6 & xenserver install fails on first boot (kernel not found).

On Sat, 2013-09-21 at 21:45 +0000, mitch@xxxxxxxxxxxx wrote:
> Hi – I posted the question to the xenserver install forum a couple
> days ago but haven’t had any luck (no reply) – then tried xen-api
> about a day ago,

I think you might need to be a bit more patient than that, you've given
the forums ~1 working day (posted Thursday evening) and the xen-api list
no working days at all (posted yesterday/Saturday).

Ian.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users