[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] xen-vnif.ko missing



The config file is show below:

name = "ttj"
boot = "c"
memory = 4096
vcpus = 2
disk = [ 'file:/root/psv-plfm-app-sim-03/vsv-#ssrsim#SSR_SIM/sobj-ttj,hda,w' ]
vif = [ 'model=e1000, mac=02:00:20:ee:64:01, bridge=intnet_tt.100', 'model=e1000, mac=02:00:20:ee:64:02,  bridge=intnet_tt.100', 'model=e1000, mac=02:00:20:ee:64:07, bridge=intnet_tt.100']

kernel = "hvmloader"
builder = "hvm"
device_model = "qemu-dm"

# Enable ACPI support
acpi = 1# Enable serial console
serial = "pty"

# Enable VNC
vnc = 1
vnclisten = "0.0.0.0"

# Disable MSI for PCI passthrough devices
pci_msitranslate = 0

# Default behavior for following events


# Disable Xen Platform PCI device
xen_platform_pci=0


Thanks,
Dhanesh.


On 11/11/2013 04:00 PM, Wei Liu wrote:
On Mon, Nov 11, 2013 at 12:36:15PM +0530, Jaya Dhanesh wrote:
I have attached the qemu logs here.
ps aux did not have an entry for the vm I created.

There should be a qemu process for your VM. Grepping for qemu doesn't
give you anything? It would be interesting to know the exact command
line of qemu process.

If qemu process crashes then there will not be one. But I cannot tell
from the log whether they crashed.

The main difference, as you stated in another email is that the working
VM has successfully registered Xen platform device. But the reason why
former one does register remains unknown.

Failing to register Xen platform device makes it impossible to
disconnect the emulated devices (disk, net, etc). That's why you're
seeing hda in working VM.

If would be better if you can provide more infomation such as VM config
file.

Wei.

Thanks,
Dhanesh.
On 11/08/2013 07:47 PM, Wei Liu wrote:
On Fri, Nov 08, 2013 at 06:07:23PM +0530, Jaya Dhanesh wrote:
Yes
Then probably 'ps aux | grep qemu' and logs from qemu are useful.

On 11/08/2013 06:05 PM, Wei Liu wrote:
On Fri, Nov 08, 2013 at 05:50:52PM +0530, Jaya Dhanesh wrote:
Yes, but the same image on another system finds hda and is able to come up.
Are you using the exact same version of Xen? Are you using the exact
same config file in both places?

Wei.

On 11/08/2013 05:45 PM, Wei Liu wrote:
On Fri, Nov 08, 2013 at 05:33:14PM +0530, Jaya Dhanesh wrote:
[...]
[    1.859781] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks:
(8.58 GB/8.00 GiB)
[    1.865438] sd 0:0:0:0: [sda] Write Protect is off
[    1.889443] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[    1.899648]  sda: sda1 sda2
[    1.902157] sd 0:0:0:0: [sda] Attached SCSI disk
sda1 it is

Wei.


      
domid: 327
config qemu network with xen bridge for  tap327.0 intnet_tt.100
config qemu network with xen bridge for  tap327.1 intnet_tt.100
config qemu network with xen bridge for  tap327.2 intnet_tt.100
config qemu network with xen bridge for  tap327.3 intnet_tt.100
config qemu network with xen bridge for  tap327.4 intnet_tt.100
config qemu network with xen bridge for  tap327.5 intnet_tt.100
config qemu network with xen bridge for  tap327.6 intnet_tt.100
config qemu network with xen bridge for  tap327.7 dbg_tt.100
Using file /root/psv-plfm-app-sim-03/vsv-#ssrsim#SSR_SIM/sobj-tt1 in read-write mode
Watching /local/domain/0/device-model/327/logdirty/cmd
Watching /local/domain/0/device-model/327/command
Watching /local/domain/327/cpu
char device redirected to /dev/pts/13
qemu_map_cache_init nr_buckets = 10000 size 4194304
/usr/src/packages/BUILD/xen-4.1.2-testing/tools/ioemu-dir/hw/xen_blktap.c:704: Init blktap pipes
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 94785e16-3f5d-2577-a8bb-695fa39b6119
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
xs_read(/local/domain/0/device-model/327/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/94785e16-3f5d-2577-a8bb-695fa39b6119/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
char device redirected to /dev/pts/17
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000


      
domid: 8
config qemu network with xen bridge for  tap8.0 intnet_tt.100
config qemu network with xen bridge for  tap8.1 intnet_tt.100
config qemu network with xen bridge for  tap8.2 intnet_tt.100
config qemu network with xen bridge for  tap8.3 intnet_tt.100
config qemu network with xen bridge for  tap8.4 intnet_tt.100
config qemu network with xen bridge for  tap8.5 intnet_tt.100
config qemu network with xen bridge for  tap8.6 intnet_tt.100
config qemu network with xen bridge for  tap8.7 dbg_tt.100
Using file /root/psv-linux-fzeq/vsv-#root#xen#13.2.79_image/sobj-ttool1 in read-write mode
Watching /local/domain/0/device-model/8/logdirty/cmd
Watching /local/domain/0/device-model/8/command
Watching /local/domain/8/cpu
char device redirected to /dev/pts/6
qemu_map_cache_init nr_buckets = 10000 size 4194304
/usr/src/packages/BUILD/xen-4.1.2-testing/tools/ioemu-dir/hw/xen_blktap.c:704: Init blktap pipes
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 157e1ddb-3393-8364-ec5e-67e4ecc5e510
Time offset set 0
char device redirected to /dev/pts/7
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/8/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/157e1ddb-3393-8364-ec5e-67e4ecc5e510/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xs_read(/local/domain/8/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/8/log-throttling'
medium change watch on `/local/domain/8/log-throttling' - unknown device, ignored
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Disconnect IDE hard disk...
Disconnect SCSI hard disk...
Disconnect netifs...
region type 0 at [f3000000,f3020000).
squash iomem [f3000000, f3020000).
region type 1 at [c100,c140).
region type 0 at [f3020000,f3040000).
squash iomem [f3020000, f3040000).
region type 1 at [c140,c180).
region type 0 at [f3040000,f3060000).
squash iomem [f3040000, f3060000).
region type 1 at [c180,c1c0).
region type 0 at [f3060000,f3080000).
squash iomem [f3060000, f3080000).
region type 1 at [c1c0,c200).
region type 0 at [f3080000,f30a0000).
squash iomem [f3080000, f30a0000).
region type 1 at [c200,c240).
region type 0 at [f30a0000,f30c0000).
squash iomem [f30a0000, f30c0000).
region type 1 at [c240,c280).
region type 0 at [f30c0000,f30e0000).
squash iomem [f30c0000, f30e0000).
region type 1 at [c280,c2c0).
region type 0 at [f30e0000,f3100000).
squash iomem [f30e0000, f3100000).
region type 1 at [c2c0,c300).
Shutdown taps...
Done.
Unknown PV product 65535 loaded in guest
PV driver build 50334976


    


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.