|
i have the same problem on wheezy with Kernel 3.14.3-amd64,
XEN-4.4.0-RELEASE. no Keyboard Input accepted after Kernel is loaded.
if i am back on my dev machine i will paste some log outputs.
Here is some output from dmesg.
NON-XEN dmesg output
[snip]
[ 1.971889] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.038929] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.038932] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.039199] hub 2-1:1.0: USB hub found
[ 2.039279] hub 2-1:1.0: 6 ports detected
[ 2.110708] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.127405] random: nonblocking pool is initialized
[ 2.204476] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10
[ 2.204480] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.204482] usb 1-1.1: Product: Virtual Keyboard and Mouse
[ 2.204484] usb 1-1.1: Manufacturer: American Megatrends Inc.
[ 2.204486] usb 1-1.1: SerialNumber: serial
[ 2.310665] usb 2-1.4: new low-speed USB device number 3 using ehci-pci
[ 2.408258] usb 2-1.4: New USB device found, idVendor=413c, idProduct=2107
[ 2.408263] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.408266] usb 2-1.4: Product: Dell USB Entry Keyboard
[ 2.408268] usb 2-1.4: Manufacturer: DELL
[ 2.478688] Switched to clocksource tsc
[ 2.655880] systemd-udevd[452]: starting version 204
[ 2.852394] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.854925] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 2.854929] ACPI: Sleep Button [SLPB]
[ 2.854953] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.854955] ACPI: Power Button [PWRF]
[ 2.857307] alg: No test for crc32 (crc32-pclmul)
[ 2.876829] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 2.876834] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.876836] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.876838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.876838] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.876840] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.876841] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.876842] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251)
[ 2.876844] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.876844] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.884162] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 2.889205] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 2.889211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.903523] systemd-udevd[503]: renamed network interface eth2 to rename4
[ 2.926455] ipmi message handler version 39.2
[ 2.933323] IPMI System Interface driver.
[ 2.933338] ipmi_si: probing via ACPI
[ 2.933349] ipmi_si 00:09: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[ 2.933350] ipmi_si: Adding ACPI-specified kcs state machine
[ 2.933356] ipmi_si: probing via SMBIOS
[ 2.933357] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 2.933358] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 2.933360] ipmi_si: probing via SPMI
[ 2.933361] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 2.933361] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 2.933362] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 2.941282] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.958768] usbcore: registered new interface driver usbhid
[ 2.958769] usbhid: USB HID core driver
[ 2.979148] systemd-udevd[505]: renamed network interface eth1 to eth2
[ 2.987915] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
[ 2.987966] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0
[ 2.988032] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4
[ 2.988091] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1
[ 2.988210] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
[ 2.988274] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.4/input0
[ 3.011559] iTCO_vendor_support: vendor-support=0
[ 3.011874] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.011894] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 3.022600] systemd-udevd[503]: renamed network interface rename4 to eth1
[ 3.082367] ipmi_si 00:09: Found new BMC (man_id: 0x000157, prod_id: 0x0048, dev_id: 0x21)
[ 3.082372] ipmi_si 00:09: IPMI kcs interface initialized
[ 3.085607] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 3.526625] EXT4-fs (md0): re-mounted. Opts: (null)
[ 3.652021] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ 3.747800] loop: module loaded
[ 3.939035] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
And here is the XEN dmesg from about the same spot.
[snip]
[ 4.135678] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.256765] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 4.350358] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10
[ 4.350362] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.350365] usb 1-1.1: Product: Virtual Keyboard and Mouse
[ 4.350367] usb 1-1.1: Manufacturer: American Megatrends Inc.
[ 4.350369] usb 1-1.1: SerialNumber: serial
[ 4.866152] systemd-udevd[452]: starting version 204
[ 5.046465] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 5.046470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.046474] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 5.046476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.046477] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 5.046479] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.046479] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 5.046481] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.SIOR 2 (20131115/utaddress-251)
[ 5.046483] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.046483] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.057048] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.058801] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 5.058807] ACPI: Sleep Button [SLPB]
[ 5.058837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.058839] ACPI: Power Button [PWRF]
[ 5.060651] ipmi message handler version 39.2
[ 5.061645] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.066060] usbcore: registered new interface driver usbhid
[ 5.066061] usbhid: USB HID core driver
[ 5.073517] Monitor-Mwait will be used to enter C-1 state
[ 5.073524] Monitor-Mwait will be used to enter C-2 state
[ 5.073528] Monitor-Mwait will be used to enter C-3 state
[ 5.075866] Warning: Processor Platform Limit not supported.
[ 5.078993] xen: registering gsi 22 triggering 0 polarity 1
[ 5.078997] Already setup the GSI :22
[ 5.079004] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 5.079008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.165467] systemd-udevd[497]: renamed network interface eth2 to rename4
[ 5.168165] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.176360] IPMI System Interface driver.
[ 5.176377] ipmi_si: probing via ACPI
[ 5.176390] ipmi_si 00:09: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[ 5.176391] ipmi_si: Adding ACPI-specified kcs state machine
[ 5.176400] ipmi_si: probing via SMBIOS
[ 5.176401] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 5.176402] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 5.176404] ipmi_si: probing via SPMI
[ 5.176405] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 5.176405] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 5.176407] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 5.197937] alg: No test for crc32 (crc32-pclmul)
[ 5.201215] systemd-udevd[512]: renamed network interface eth1 to eth2
[ 5.201277] iTCO_vendor_support: vendor-support=0
[ 5.201744] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.201767] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 5.214424] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
[ 5.214515] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input0
[ 5.214668] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4
[ 5.214763] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1/input1
[ 5.230310] systemd-udevd[497]: renamed network interface rename4 to eth1
[ 5.327464] ipmi_si 00:09: Found new BMC (man_id: 0x000157, prod_id: 0x0048, dev_id: 0x21)
[ 5.327470] ipmi_si 00:09: IPMI kcs interface initialized
[ 5.423458] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 5.905330] EXT4-fs (md0): re-mounted. Opts: (null)
[ 6.031883] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ 6.207641] loop: module loaded
[ 6.420991] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
Here's loaded modules: NON-XEN
Module Size Used by
loop 26609 0
x86_pkg_temp_thermal 12951 0
intel_powerclamp 13063 0
intel_rapl 17356 0
coretemp 12854 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
joydev 17063 0
hid_generic 12393 0
evdev 17445 3
kvm_intel 130584 0
kvm 380332 1 kvm_intel
crct10dif_pclmul 13387 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
usbhid 44439 0
ghash_clmulni_intel 12978 0
hid 94034 2 hid_generic,usbhid
aesni_intel 50772 0
ipmi_si 48613 0
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
ipmi_msghandler 39865 1 ipmi_si
gf128mul 12970 1 lrw
glue_helper 12695 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 14516 3 ghash_clmulni_intel,aesni_intel,ablk_helper
video 17804 0
processor 28274 0
button 12944 0
i2c_i801 16965 0
pcspkr 12595 0
i2c_core 24092 1 i2c_i801
lpc_ich 20768 0
mfd_core 12601 1 lpc_ich
ext4 465511 2
crc16 12343 1 ext4
mbcache 13082 1 ext4
jbd2 82560 1 ext4
raid10 47472 2
raid1 34596 1
md_mod 103628 4 raid1,raid10
sg 29972 0
sd_mod 44346 16
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_pclmul,crc_t10dif
ahci 25096 12
libahci 27202 1 ahci
ehci_pci 12472 0
libata 168945 2 ahci,libahci
ehci_hcd 48510 1 ehci_pci
e1000 101959 0
scsi_mod 182938 3 sg,libata,sd_mod
e1000e 195024 0
usbcore 154175 3 ehci_hcd,ehci_pci,usbhid
ptp 17460 1 e1000e
usb_common 12440 1 usbcore
pps_core 13129 1 ptp
fan 12681 0
thermal 17468 0
thermal_sys 27525 6 fan,video,intel_powerclamp,thermal,processor,x86_pkg_temp_thermal
Here's loaded modules: XEN
Module Size Used by
xen_gntdev 17032 2
xen_evtchn 12783 1
xenfs 12687 1
xen_privcmd 12868 3 xenfs
loop 26609 0
x86_pkg_temp_thermal 12951 0
intel_powerclamp 13063 0
intel_rapl 17356 0
coretemp 12854 0
evdev 17445 2
crct10dif_pclmul 13387 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
iTCO_wdt 12831 0
joydev 17063 0
hid_generic 12393 0
iTCO_vendor_support 12649 1 iTCO_wdt
ghash_clmulni_intel 12978 0
aesni_intel 50772 0
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
gf128mul 12970 1 lrw
glue_helper 12695 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 14516 3 ghash_clmulni_intel,aesni_intel,ablk_helper
i2c_i801 16965 0
usbhid 44439 0
hid 94034 2 hid_generic,usbhid
i2c_core 24092 1 i2c_i801
lpc_ich 20768 0
pcspkr 12595 0
mfd_core 12601 1 lpc_ich
ipmi_si 48613 0
video 17804 0
processor 28274 0
button 12944 0
ipmi_msghandler 39865 1 ipmi_si
ext4 465511 2
crc16 12343 1 ext4
mbcache 13082 1 ext4
jbd2 82560 1 ext4
raid10 47472 2
raid1 34596 1
md_mod 103628 4 raid1,raid10
sg 29972 0
sd_mod 44346 16
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_pclmul,crc_t10dif
ahci 25096 12
libahci 27202 1 ahci
e1000 101959 0
libata 168945 2 ahci,libahci
scsi_mod 182938 3 sg,libata,sd_mod
thermal 17468 0
fan 12681 0
thermal_sys 27525 6 fan,video,intel_powerclamp,thermal,processor,x86_pkg_temp_thermal
ehci_pci 12472 0
ehci_hcd 48510 1 ehci_pci
usbcore 154175 3 ehci_hcd,ehci_pci,usbhid
usb_common 12440 1 usbcore
e1000e 195024 0
ptp 17460 1 e1000e
pps_core 13129 1 ptp
| 
