|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] VExpress TC2 2GB
Hi Julien, Many thanks for reply. Unfortunately I don't have any more dumps / traces other that I can get with Xen's console (3x ctrl-a) or JTAG. Using JTAG I can see CPU mode - data/prefetch abort at 0xffff000c, which is, presumably, address of hi-vector prefetch abort handler, but need to check what's V bit in CP15 c1 SCTLR, otherwise it's not exceptions vectors table, but faulty/misconfigured memory. Dom0 boot log I've included in the end of this message, but IMHO it's not very interesting. I've also been trying vanilla 3.14 kernel and it's also failing on 2GB configuration, however differently - it gets stuck in a loop, as far as I've traced, somewhere in Â__memblock_find_range_top_down(...) kernel function. Rebooting... Disabling debug USB. Switching off ATX PSU. Board powered down, rebooting...  ARM V2M Firmware v3.1.1 Build Date: Aug 20 2012  Date: Fri 16 Jan 2015 Time:   16:57:08  Powering up system... Daughterboard fitted to site 1.  Switching on ATXPSU... ATX3V3: ON VIOset: 1.8V MBtemp: 35 degC  Configuring motherboard (rev D, var A)... IOFPGA config: PASSED MUXFPGA config: PASSED OSC CLK config: PASSED  Testing SMC devices (FPGA build 16)... SRAM 32MB test: PASSED VRAM 8MB test: PASSED LAN9118  test: PASSED USB & OTG test: PASSED KMI1/KMI2 test: PASSED MMC & SD test: PASSED DVI image test: PASSED AACI AC97 test: PASSED CF card  test: PASSED UART port test: PASSED MAC addrs test: PASSED  Reading Site 1 Board File \SITE1\HBI0249A\board.txt DB1 JTAG configuration complete. Setting DB1 OSCCLKS... DB1.0 DCC 0 SPI configuration complete.  Writing SCC 0x40610006 with 0x00001FFF Writing SCC 0x40610007 with 0xFF00FF00 Writing SCC 0x40610046 with 0x01CD1011 Writing SCC 0x406101C0 with 0x0032E003 Writing SCC 0x40610100 with 0x33330C00 Writing SCC 0x40610048 with 0x022F1010 Writing SCC 0x40610049 with 0x0011710D Writing SCC 0x4061004A with 0x022F1010 Writing SCC 0x4061004B with 0x0011710D Writing SCC 0x4061004C with 0x022F1010 Writing SCC 0x4061004D with 0x0011710D Writing SCC 0x4061004E with 0x022F1010 Writing SCC 0x4061004F with 0x0011710D Writing SCC 0x40610300 with 0x00000005 Writing SCC 0x40610301 with 0x060E0356 Writing SCC 0x40610302 with 0x00000000 Writing SCC 0x40610303 with 0x00000000 Writing SCC 0x40610304 with 0x384061A8 Writing SCC 0x40610305 with 0x38407530 Writing SCC 0x40610306 with 0x384088B8 Writing SCC 0x40610307 with 0x38409C40 Writing SCC 0x40610308 with 0x3840AFC8 Writing SCC 0x40610309 with 0x3840C350 Writing SCC 0x4061030A with 0x3CF0D6D8 Writing SCC 0x4061030B with 0x41A0EA60 Writing SCC 0x4061030C with 0x3840445C Writing SCC 0x4061030D with 0x38404E20 Writing SCC 0x4061030E with 0x384061A8 Writing SCC 0x4061030F with 0x38407530 Writing SCC 0x40610310 with 0x384088B8 Writing SCC 0x40610311 with 0x38409C40 Writing SCC 0x40610312 with 0x3CF0AFC8 Writing SCC 0x40610313 with 0x41A0C350 Writing SCC 0x40610004 with 0x000003D0 DB1.0 DCC 0 SCC configuration complete.  DB SMB clock enabled. Waiting for SITE1 CB_READY... Testing SMB clock... Configuring MUXFPGA for MB. Setting DVI mode for VGA. Releasing Daughterboard resets. Switching MCC log to UART1.  ARM Versatile Express Boot Monitor Version:  V5.1.9 Build Date: Dec 3 2012 Daughterboard Site 1: V2P-CA15_A7 Cortex A15 Daughterboard Site 2: Not Used Running boot script from flash - BOOTSCRIPT   U-Boot 2013.10-00005-g1230966-dirty (Jan 16 2015 - 14:30:41)  DRAM: 2 GiB WARNING: Caches not enabled Flash: 128 MiB MMC:  MMC: 0 Using default environment  In:  serial Out:  serial Err:  serial Net:  smc911x-0 Warning: smc911x-0 using MAC address from net device  Hit any key to stop autoboot: 0 VExpress# VExpress# fdt addr 0x81f00000 VExpress# fdt rm /psci VExpress# source 0x81000000 ## Executing script at 81000000 ## Booting kernel from Legacy Image at 80400000 ...  Image Name:  Image Type:  ARM Linux Kernel Image (uncompressed)  Data Size:  656220 Bytes = 640.8 KiB  Load Address: 80200000  Entry Point: 80200000  Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000  Booting using the fdt blob at 0x81f00000  Loading Kernel Image ... OK  reserving fdt memory region: addr=ff000000 size=1000000  reserving fdt memory region: addr=81f00000 size=4000  Loading Device Tree to bfee6000, end bfeecfff ... OK  Starting kernel ...  ÂXen 4.5.0 (XEN) Xen version 4.5.0 (ivarub01@host) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 4.8.2-16ubuntu4) 4.8.2) debug=n Fri Jan 16 14:29:04 UTC 2015 (XEN) Latest ChangeSet: Mon Jan 12 11:30:05 2015 -0500 git:a8ac229-dirty (XEN) Console output is synchronous. (XEN) Processor: 412fc0f1: "ARM Limited", variant: 0x2, part 0xc0f, rev 0x1 (XEN) 32-bit Execution: (XEN)  Processor Features: 00001131:00011011 (XEN)   Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle (XEN)   Extensions: GenericTimer Security (XEN)  Debug Features: 02010555 (XEN)  Auxiliary Features: 00000000 (XEN)  Memory Model Features: 10201105 20000000 01240000 02102211 (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000 (XEN) Set SYS_FLAGS to 00000000fee0004c (0020004c) (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 (XEN) Using generic timer at 24000 KHz (XEN) GICv2 initialization: (XEN)     gic_dist_addr=000000002c001000 (XEN)     gic_cpu_addr=000000002c002000 (XEN)     gic_hyp_addr=000000002c004000 (XEN)     gic_vcpu_addr=000000002c006000 (XEN)     gic_maintenance_irq=25 (XEN) GICv2: 192 lines, 5 cpus, secure (IID 0200043b). (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) I/O virtualisation disabled (XEN) Allocated console ring of 16 KiB. (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 (XEN) Bringing up CPU1 (XEN) Brought up 2 CPUs (XEN) P2M: 40-bit IPA (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading kernel from boot module @ 00000000a0008000 (XEN) Allocating 1:1 mappings totalling 128MB for dom0: (XEN) BANK[0] 0x000000e0000000-0x000000e8000000 (128MB) (XEN) Loading zImage from 00000000a0008000 to 00000000e7c00000-00000000e7fbbda0 (XEN) Loading dom0 DTB to 0x00000000e7a00000-0x00000000e7a034ae (XEN) Scrubbing Free RAM on 1 nodes using 2 CPUs (XEN) ........done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 260kB init memory. [  0.000000] Booting Linux on physical CPU 0x0 [  0.000000] Initializing cgroup subsys cpu [  0.000000] Linux version 3.10.16-01623-g765faea-dirty (ivarub01@host) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP Fri Jan 16 14:30:36 UTC 2015 [  0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=70c7387d [  0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [  0.000000] Machine: ARM-Versatile Express, model: V2P-CA15_CA7 [  0.000000] cma: CMA: reserved 16 MiB at e6800000 [  0.000000] Memory policy: ECC disabled, Data cache writealloc [  0.000000] psci: probing function IDs from device-tree [  0.000000] PERCPU: Embedded 9 pages/cpu @c07f3000 s14144 r8192 d14528 u36864 [  0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [  0.000000] Kernel command line: earlyprintk console=hvc0,38400 psci=enable root=/dev/nfs nfsrootdebug nfsroot=10.1.197.34:/work/test/out/android-xen-tc2/fs/dom0-root,tcp,v3 rootwait rw text ip=dhcp [  0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [  0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [  0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [  0.000000] Memory: 128MB = 128MB total [  0.000000] Memory: 106316k/106316k available, 24756k reserved, 0K highmem [  0.000000] Virtual kernel memory layout: [  0.000000]   vector : 0xffff0000 - 0xffff1000  (  4 kB) [  0.000000]   fixmap : 0xfff00000 - 0xfffe0000  ( 896 kB) [  0.000000]   vmalloc : 0xc8800000 - 0xff000000  ( 872 MB) [  0.000000]   lowmem : 0xc0000000 - 0xc8000000  ( 128 MB) [  0.000000]   pkmap  : 0xbfe00000 - 0xc0000000  (  2 MB) [  0.000000]   modules : 0xbf800000 - 0xbfe00000  (  6 MB) [  0.000000]    .text : 0xc0008000 - 0xc05bfeb8  (5856 kB) [  0.000000]    .init : 0xc05c0000 - 0xc0618740  ( 354 kB) [  0.000000]    .data : 0xc061a000 - 0xc0669c30  ( 320 kB) [  0.000000]    .bss : 0xc0669c30 - 0xc06ea35c  ( 514 kB) [  0.000000] Hierarchical RCU implementation. [  0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [  0.000000] NR_IRQS:16 nr_irqs:16 16 [  0.000000] Architected local timer running at 24.00MHz (virt). [  0.000000] Switching to timer-based delay loop [  0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns [  0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [  0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [  0.000000] Console: colour dummy device 80x30 [  4.971050] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [  4.971063] pid_max: default: 32768 minimum: 301 [  4.971213] Mount-cache hash table entries: 512 [  4.974527] CPU: Testing write buffer coherency: ok [  4.974554] ftrace: allocating 21536 entries in 43 pages [  4.996304] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [  4.996324] Setting up static identity map for 0xc03eac10 - 0xc03eac5c [  4.998929] vexpress-spc loaded at c880a000 [  4.998937] TC2 power management initialized [  5.982080] CPU1: failed to come online [  5.982133] Brought up 1 CPUs [  5.982141] SMP: Total of 1 processors activated (48.00 BogoMIPS). [  5.982146] CPU: All CPU(s) started in SVC mode. [  5.982579] devtmpfs: initialized [  5.987069] Xen 4.5 support found, events_irq=31 gnttab_frame_pfn=10000 [  5.987262] Grant tables using version 1 layout. [  5.987308] Grant table initialized [  5.988759] regulator-dummy: no parameters [  5.989388] NET: Registered protocol family 16 [  5.989661] Xen: initializing cpu0 [  5.990838] DMA: preallocated 256 KiB pool for atomic coherent allocations [  6.003196] hw-breakpoint: Failed to enable monitor mode on CPU 0. [  6.003206] Serial: AMBA PL011 UART driver [  6.003284] 1c0a0000.uart: ttyAMA1 at MMIO 0x1c0a0000 (irq = 38) is a PL011 rev2 [  6.003548] 1c0b0000.uart: ttyAMA2 at MMIO 0x1c0b0000 (irq = 39) is a PL011 rev2 [  6.003774] 1c0c0000.uart: ttyAMA3 at MMIO 0x1c0c0000 (irq = 40) is a PL011 rev2 [  6.024867] bio: create slab <bio-0> at 0 [  6.025294] xen/balloon: Initialising balloon driver. [  6.025838] 3V3: 3300 mV [  6.026606] SCSI subsystem initialized [  6.027152] usbcore: registered new interface driver usbfs [  6.027274] usbcore: registered new interface driver hub [  6.027430] usbcore: registered new device driver usb [  6.028449] Advanced Linux Sound Architecture Driver Initialized. [  6.029308] Switching to clocksource arch_sys_counter [  6.057928] NET: Registered protocol family 2 [  6.058307] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [  6.058332] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [  6.058354] TCP: Hash tables configured (established 1024 bind 1024) [  6.058392] TCP: reno registered [  6.058402] UDP hash table entries: 256 (order: 1, 8192 bytes) [  6.058420] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [  6.058588] NET: Registered protocol family 1 [  6.058789] RPC: Registered named UNIX socket transport module. [  6.058796] RPC: Registered udp transport module. [  6.058802] RPC: Registered tcp transport module. [  6.058808] RPC: Registered tcp NFSv4.1 backchannel transport module. [  6.059199] kvm [1]: HYP mode not available [  6.059278] hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available [  6.059326] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 1 counters available [  6.061340] VFS: Disk quotas dquot_6.5.2 [  6.061416] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [  6.062007] NFS: Registering the id_resolver key type [  6.062048] Key type id_resolver registered [  6.062055] Key type id_legacy registered [  6.062083] jffs2: version 2.2. (NAND) (SUMMARY)  2001-2006 Red Hat, Inc. [  6.062201] fuse init (API version 7.22) [  6.062436] msgmni has been set to 239 [  6.063439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [  6.063448] io scheduler noop registered [  6.063455] io scheduler deadline registered [  6.063473] io scheduler cfq registered (default) [  6.063686] clcd-pl11x 1c1f0000.clcd: PL111 rev1 at 0x1c1f0000 [  6.063814] clcd-pl11x 1c1f0000.clcd: IOFPGA CLCD hardware, 640x480@59 display [  6.219053] Console: switching to colour frame buffer device 80x30 [  6.345139] Event-channel device installed. [  6.354108] A15 Vcore: 800 <--> 1050 mV at 905 mV [  6.373842] A7 Vcore: 800 <--> 1050 mV [  6.393463] VIO: at 1796 mV [  8.285549] console [hvc0] enabled [  8.303073] brd: module loaded [  8.315339] loop: module loaded [  8.326060] mtdoops: mtd device (mtddev=name/number) must be supplied [  8.344787] tun: Universal TUN/TAP device driver, 1.6 [  8.359888] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [  8.378921] smsc911x: Driver version 2008-10-21 [  8.392119] smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2 [  8.416881] libphy: smsc911x-mdio: probed [  8.428476] smsc911x 1a000000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1a000000.etherne:01, irq=-1) [  8.462192] smsc911x 1a000000.ethernet eth0: MAC Address: 00:02:f7:00:4c:3f [  8.482924] Initialising Xen virtual ethernet driver. [  8.498592] nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller [  8.517312] nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1 [  8.736947] nxp-isp1760 1b000000.usb: bus width: 32, oc: digital [  8.774083] nxp-isp1760 1b000000.usb: irq 48, io mem 0x1b000000 [  8.791270] nxp-isp1760 1b000000.usb: USB ISP 1761 HW rev. 1 started [  8.810816] hub 1-0:1.0: USB hub found [  8.821608] hub 1-0:1.0: 1 port detected [  8.833802] usbcore: registered new interface driver usb-storage [  8.851856] mousedev: PS/2 mouse device common for all mice [  8.868712] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0 [  8.889789] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx [  8.914415] cpuidle: using governor ladder [  8.926696] cpuidle: using governor menu [  8.938758] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 41,42 (pio) [  9.003925] ledtrig-cpu: registered to indicate activity on CPUs [  9.021745] usbcore: registered new interface driver usbhid [  9.038031] usbhid: USB HID core driver [  9.049987] ashmem: initialized [  9.059231] logger: created 256K log 'log_main' [  9.073042] logger: created 256K log 'log_events' [  9.086908] logger: created 256K log 'log_radio' [  9.100782] logger: created 256K log 'log_system' [  9.125906] aaci-pl041 1c040000.aaci: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43 [  9.150021] aaci-pl041 1c040000.aaci: FIFO 512 entries [  9.165428] nxp-isp1760 1b000000.usb: port 1 high speed [  9.181630] oprofile: using timer interrupt. [  9.194015] Netfilter messages via NETLINK v0.30. [  9.208081] nf_conntrack version 0.5.0 (1917 buckets, 7668 max) [  9.225858] ctnetlink v0.93: registering with nfnetlink. [  9.241681] xt_time: kernel timezone is -0000 [  9.254751] ipip: IPv4 over IPv4 tunneling driver [  9.269149] usb 1-1: new high-speed USB device number 2 using nxp-isp1760 [  9.289584] ip_tables: (C) 2000-2006 Netfilter Core Team [  9.305109] arp_tables: (C) 2002 David S. Miller [  9.318835] TCP: cubic registered [  9.328792] Initializing XFRM netlink socket [  9.341652] NET: Registered protocol family 10 [  9.355461] ip6_tables: (C) 2000-2006 Netfilter Core Team [  9.371129] NET: Registered protocol family 17 [  9.384435] NET: Registered protocol family 15 [  9.397790] Bridge firewalling registered [  9.410156] DCCP: Activated CCID 2 (TCP-like) [  9.422882] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [  9.440366] Key type dns_resolver registered [  9.453196] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [  9.475922] Registering SWP/SWPB emulation handler [  9.490993] rtc-pl031 1c170000.rtc: setting system clock to 2015-01-16 16:57:41 UTC (1421427461) [  9.532430] smsc911x 1a000000.ethernet eth0: SMSC911x/921x identified at 0xc88c0000, IRQ: 47 [  9.557281] nxp-isp1760 1b000000.usb: port 1 high speed [  9.572838] Sending DHCP requests .[  9.605272] input: AT Raw Set 2 keyboard as /devices/smb.23/motherboard.24/iofpga.25/1c060000.kmi/serio0/input/input0 [  9.651497] hub 1-1:1.0: USB hub found [  9.662379] hub 1-1:1.0: 3 ports detected [  10.614813] atkbd serio1: keyboard reset failed on 1c070000.kmi [  11.048756] atkbd serio1: keyboard reset failed on 1c070000.kmi .., OK       [  15.634227] IP-Config: Got DHCP answer from 10.1.197.4, my address is 10.1.197.21 [  15.656831] IP-Config: Complete: [  15.666267]   device=eth0, hwaddr=00:02:f7:00:4c:3f, ipaddr=10.1.197.21, mask=255.255.255.0, gw=10.1.197.1 [  15.695745]   host=10.1.197.21, domain=domain, nis-domain=(none) [  15.717344]   bootserver=10.1.104.91, rootserver=10.1.197.34, rootpath= [  15.736989]   nameserver0=10.1.2.24, nameserver1=10.1.2.23 [  15.754913] ALSA device list: [  15.763894]  #0: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43 [  15.794568] VFS: Mounted root (nfs filesystem) on device 0:12. [  15.812294] devtmpfs: mounted [  15.820984] Freeing unused kernel memory: 352K (c05c0000 - c0618000) Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory [  16.711925] init: plymouth-upstart-bridge main process (1138) terminated with status 1 [  16.738888] init: plymouth-upstart-bridge main process ended, respawning [  16.942353] init: plymouth-upstart-bridge main process (1148) terminated with status 1 [  16.965758] init: plymouth-upstart-bridge main process ended, respawning [  17.002758] init: ureadahead main process (1141) terminated with status 5 [  17.146606] init: plymouth-upstart-bridge main process (1152) terminated with status 1 [  17.170114] init: plymouth-upstart-bridge main process ended, respawning [  22.226016] CPU1: failed to come online Â* Starting Mount filesystems on boot                  [ OK ] Â* Stopping Send an event to indicate plymouth is up           [ OK ] Â* Starting Signal sysvinit that the rootfs is mounted          [ OK ] Â* Starting Block the mounting event for NFS4 filesytems until idmapd is [ OK ]g Â* Starting Block the mounting event for NFS filesytems until statd is ru[ OK ] Â* Starting Clean /tmp directory                     [ OK ] Â* Stopping Clean /tmp directory                     [ OK ] Â* Starting Populate and link to /run filesystem             [ OK ] Â* Stopping Populate and link to /run filesystem             [ OK ] Â* Stopping Track if upstart is running in a container          [ OK ] Â* Starting Initialize or finalize resolvconf              [ OK ] Â* Starting Signal sysvinit that virtual filesystems are mounted     [ OK ] Â* Starting Signal sysvinit that virtual filesystems are mounted     [ OK ] Â* Starting Bridge udev events into upstart               [ OK ] Â* Starting Signal sysvinit that local filesystems are mounted      [ OK ] Â* Starting device node and kernel event manager             [ OK ] Â* Starting Signal sysvinit that remote filesystems are mounted     [ OK ] Â* Starting load modules from /etc/modules                [ OK ] Â* Starting cold plug devices                      [ OK ] Â* Starting log initial device creation                 [ OK ] Â* Stopping load modules from /etc/modules                [ OK ] Â* Starting flush early job output to logs                [ OK ] Â* Stopping flush early job output to logs                [ OK ] Â* Starting NFSv4 id <-> name mapper                   [ OK ] Â* Stopping Block the mounting event for NFS4 filesytems until idmapd is [ OK ]g Â* Stopping rpcsec_gss daemon                      [ OK ] Â* Starting configure network device security              [ OK ] Â* Starting configure network device                   [ OK ] Â* Starting load fallback graphics devices                [ OK ] Â* Starting set console font                       [ OK ] Â* Stopping load fallback graphics devices                [ OK ] Â* Stopping set console font                       [ OK ] Â* Starting userspace bootsplash                     [ OK ] Â* Stopping userspace bootsplash                     [ OK ] Â* Starting Send an event to indicate plymouth is up           [ OK ] Â* Stopping Send an event to indicate plymouth is up           [ OK ] Â* Starting configure network device security              [ OK ] Â* Starting configure network device security              [ OK ] Â* Starting configure network device                   [ OK ] Â* Starting Mount network filesystems                  [ OK ] Â* Starting Upstart job to start rpcbind on boot only          [ OK ] Â* Starting Failsafe Boot Delay                     [ OK ] Â* Stopping Upstart job to start rpcbind on boot only          [ OK ] Â* Stopping Mount network filesystems                  [ OK ] Â* Starting configure network device                   [ OK ] Â* Starting system logging daemon                    [ OK ] Â* Stopping Failsafe Boot Delay                     [ OK ] Â* Starting RPC portmapper replacement                  [ OK ] Â* Stopping cold plug devices                      [ OK ] Â* Starting System V initialisation compatibility            [ OK ] Â* Stopping log initial device creation                 [ OK ] Â* Starting configure network device security              [ OK ] Â* Starting save udev log and update rules                [ OK ] Â* Starting NSM status monitor                      [ OK ] Â* Setting up X socket directories...    * Stopping save udev log and[ OK ]e rules                                     [ OK ] Â* Stopping Block the mounting event for NFS filesytems until statd is ru[ OK ] Â* Starting configure virtual network devices              [ OK ] Â* Stopping System V initialisation compatibility            [ OK ] Â* Starting System V runlevel compatibility               [ OK ] Â* Starting xencommons                          [ OK ] Â* Starting xserver                           [ OK ] Â* Starting save kernel messages                     [ OK ] Â* Starting regular background program processing daemon         [ OK ] Â* Starting NSM status monitor                      [ OK ] Â* Starting Block the mounting event for NFS4 filesytems until idmapd is [ OK ]g Â* Starting OpenSSH server                        [ OK ] Â* Stopping Block the mounting event for NFS filesytems until statd is ru[ OK ] Â* Stopping save kernel messages                     [ OK ] Â* Stopping xserver                           [ OK ] Â* Starting NSM status monitor                      [ OK ] Â* Stopping Block the mounting event for NFS4 filesytems until idmapd is [ OK ]g Â* Starting NSM status monitor                      [ OK ] Â* Starting NSM status monitor                      [ OK ] Â* Starting User-mode networking switch uml_switch            [ OK ] Â* Starting NSM status monitor                      [ OK ] Â* Stopping System V runlevel compatibility               [ OK ] Ubuntu 14.04 LTS dom0 hvc0 dom0 login: root (automatic login) Last login: Fri Jan 16 14:56:39 UTC 2015 from host on pts/3 Welcome to Ubuntu 14.04 LTS (GNU/Linux 3.10.16-01623-g765faea-dirty armv7l) root@dom0:~# On Fri, Jan 16, 2015 at 4:49 PM, Julien Grall <julien.grall@xxxxxxxxxx> wrote: On 16/01/15 16:29, Ivan Rubilo wrote: _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |