|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Xen 4.6.0: Dom0 freezes at creation of HVM domain with activated IOMMU
I'm adding the AMD IOMMU maintainer. On Sat, May 07, 2016 at 06:06:57PM +0200, Rüdiger Otte wrote: > Hi, > > after upgrading my AMD A8-6500 based system from Xen 4.4.1 to 4.6.0 > I'm no longer able to start HVM domains with activated IOMMU. Trying > to create a HVM domain just let the whole system freeze. > > Probably this is a problem with broken firmware but I wonder if there > would be a way to work around this, since with 4.4.1 everything is > running fine even with PCI passthrough of Network, USB and VGA, > as long as I give ivrs_ioapic option to Xen commandline. > > Attached is the output of "xl dmesg" of 4.6.0 and 4.4.1. Because of > the immediate system freeze debug output of 4.6.0 is only to the > point where HVM domain would start. > > What I have tried so far: > - Disabling IOMMU in BIOS or Xen lets HVM domain start. It seems to > lack graphical output but that's probably a different topic. > - Disabling CPU frequency scaling in BIOS or Xen just leads to the > same failure. > - Disabling CPU C6 state in BIOS lets system reboot at HVM domain > creation with Xen 4.4.1. Is there any chance that you could get the serial output of that box? Xen might print some messages before completely freezing, without that I think it's going to be quite hard to debug what's going on. > Any help is appreciated! > > Thanks, > Ruediger > (XEN) Xen version 4.4.1 (Debian 4.4.1-9.rebuild) (ruediger.otte@xxxxxxx) (gcc > (Debian 4.9.2-10) 4.9.2) debug=n Sun May 24 16:09:40 CEST 2015 > (XEN) Bootloader: GRUB 2.02~beta2-22+deb8u1 > (XEN) Command line: placeholder reboot=no loglvl=all guest_loglvl=all > ivrs_ioapic[0]=00:14.0 irq_ratelimit dom0_mem=4194304 dom0_vcpus_pin=true > dom0_max_vcpus=2 vcpu_migration_delay=1000 shed_smt_powersavings=false > cpufreq=xen vpmu=off noserialnumber=true console=vga console_timestamps=boot > vga=text-80x30 > (XEN) Video information: > (XEN) VGA is text mode 80x30, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 2 MBR signatures > (XEN) Found 2 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009e800 (usable) > (XEN) 000000000009e800 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000008cefa000 (usable) > (XEN) 000000008cefa000 - 000000008cf2a000 (reserved) > (XEN) 000000008cf2a000 - 000000008d1ed000 (usable) > (XEN) 000000008d1ed000 - 000000008d2b9000 (ACPI NVS) > (XEN) 000000008d2b9000 - 000000008e1c7000 (reserved) > (XEN) 000000008e1c7000 - 000000008e1c8000 (usable) > (XEN) 000000008e1c8000 - 000000008e3ce000 (ACPI NVS) > (XEN) 000000008e3ce000 - 000000008e850000 (usable) > (XEN) 000000008e850000 - 000000008efe1000 (reserved) > (XEN) 000000008efe1000 - 000000008f000000 (usable) > (XEN) 00000000fec00000 - 00000000fec01000 (reserved) > (XEN) 00000000fec10000 - 00000000fec11000 (reserved) > (XEN) 00000000fed00000 - 00000000fed01000 (reserved) > (XEN) 00000000fed80000 - 00000000fed90000 (reserved) > (XEN) 00000000ff000000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 000000044f000000 (usable) > (XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA) > (XEN) ACPI: XSDT 8D271080, 0084 (r1 ALASKA A M I 1072009 AMI 10013) > (XEN) ACPI: FACP 8D277208, 010C (r5 ALASKA A M I 1072009 AMI 10013) > (XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero > address or length: 0000000000000000/1 [20070126] > (XEN) ACPI: DSDT 8D2711A0, 6067 (r2 ALASKA A M I 0 INTL 20051117) > (XEN) ACPI: FACS 8D2AE080, 0040 > (XEN) ACPI: APIC 8D277318, 0072 (r3 ALASKA A M I 1072009 AMI 10013) > (XEN) ACPI: FPDT 8D277390, 0044 (r1 ALASKA A M I 1072009 AMI 10013) > (XEN) ACPI: MCFG 8D2773D8, 003C (r1 ALASKA A M I 1072009 MSFT 10013) > (XEN) ACPI: HPET 8D277418, 0038 (r1 ALASKA A M I 1072009 AMI 5) > (XEN) ACPI: IVRS 8D277450, 0068 (r2 AMD BANTRY 1 AMD 0) > (XEN) ACPI: SSDT 8D2774B8, 0B9C (r1 AMD BANTRY 1 AMD 1) > (XEN) ACPI: SSDT 8D278058, 04B7 (r2 AMD BANTRY 1 MSFT 4000000) > (XEN) ACPI: CRAT 8D278510, 0578 (r1 AMD BANTRY 1 AMD 1) > (XEN) ACPI: SSDT 8D278A88, 1459 (r1 AMD CPMDFIGP 1 INTL 20051117) > (XEN) ACPI: SSDT 8D279EE8, 0852 (r1 AMD CPMDFDGP 1 INTL 20051117) > (XEN) ACPI: SSDT 8D27A740, 122C (r1 AMD CPMCMN 1 INTL 20051117) > (XEN) System RAM: 15813MB (16193524kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-000000044f000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000fd7e0 > (XEN) DMI 2.7 present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0] > (XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: 32/64X FACS address mismatch in FADT - 8d2ae080/0000000000000000, > using 32 > (XEN) ACPI: wakeup_vec[8d2ae08c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) > (XEN) Processor #16 5:3 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) > (XEN) Processor #17 5:3 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) > (XEN) Processor #18 5:3 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) > (XEN) Processor #19 5:3 APIC version 16 > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x10228210 base: 0xfed00000 > (XEN) ERST table was not found > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) > (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3493.695 MHz processor. > (XEN) Initing memory sharing. > (XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007 > (XEN) AMD Fam15h machine check reporting enabled > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff > (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff > (XEN) AMD-Vi: IOMMU Extended Features: > (XEN) - Prefetch Pages Command > (XEN) - Peripheral Page Service Request > (XEN) - Guest Translation > (XEN) - Invalidate All Command > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) Interrupt remapping enabled > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) [2016-05-07 14:33:46] Platform timer is 14.318MHz HPET > (XEN) [2016-05-07 14:33:46] Allocated console ring of 32 KiB. > (XEN) [2016-05-07 14:33:46] HVM: ASIDs enabled. > (XEN) [2016-05-07 14:33:46] SVM: Supported advanced features: > (XEN) [2016-05-07 14:33:46] - Nested Page Tables (NPT) > (XEN) [2016-05-07 14:33:46] - Last Branch Record (LBR) Virtualisation > (XEN) [2016-05-07 14:33:46] - Next-RIP Saved on #VMEXIT > (XEN) [2016-05-07 14:33:46] - VMCB Clean Bits > (XEN) [2016-05-07 14:33:46] - DecodeAssists > (XEN) [2016-05-07 14:33:46] - Pause-Intercept Filter > (XEN) [2016-05-07 14:33:46] - TSC Rate MSR > (XEN) [2016-05-07 14:33:46] HVM: SVM enabled > (XEN) [2016-05-07 14:33:46] HVM: Hardware Assisted Paging (HAP) detected > (XEN) [2016-05-07 14:33:46] HVM: HAP page sizes: 4kB, 2MB, 1GB > (XEN) [2016-05-07 14:33:46] HVM: PVH mode not supported on this platform > (XEN) [2016-05-07 14:33:46] microcode: CPU1 collect_cpu_info: > patch_id=0x6001119 > (XEN) [2016-05-07 14:33:46] microcode: CPU2 collect_cpu_info: > patch_id=0x6001119 > (XEN) [2016-05-07 14:33:46] microcode: CPU3 collect_cpu_info: > patch_id=0x6001119 > (XEN) [2016-05-07 14:33:46] Brought up 4 CPUs > (XEN) [2016-05-07 14:33:46] ACPI sleep modes: S3 > (XEN) [2016-05-07 14:33:46] MCA: Use hw thresholding to adjust polling > frequency > (XEN) [2016-05-07 14:33:46] mcheck_poll: Machine check polling timer started. > (XEN) [2016-05-07 14:33:46] *** LOADING DOMAIN 0 *** > (XEN) [2016-05-07 14:33:46] Xen kernel: 64-bit, lsb, compat32 > (XEN) [2016-05-07 14:33:46] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 > -> 0x1922000 > (XEN) [2016-05-07 14:33:46] PHYSICAL MEMORY ARRANGEMENT: > (XEN) [2016-05-07 14:33:46] Dom0 alloc.: > 000000041e000000->0000000420000000 (1038434 pages to be allocated) > (XEN) [2016-05-07 14:33:46] Init. ramdisk: 000000044e862000->000000044efff5a7 > (XEN) [2016-05-07 14:33:46] VIRTUAL MEMORY ARRANGEMENT: > (XEN) [2016-05-07 14:33:46] Loaded kernel: ffffffff81000000->ffffffff81922000 > (XEN) [2016-05-07 14:33:46] Init. ramdisk: 0000000000000000->0000000000000000 > (XEN) [2016-05-07 14:33:46] Phys-Mach map: 0000008000000000->0000008000800000 > (XEN) [2016-05-07 14:33:46] Start info: ffffffff81922000->ffffffff819224b4 > (XEN) [2016-05-07 14:33:46] Page tables: ffffffff81923000->ffffffff81934000 > (XEN) [2016-05-07 14:33:46] Boot stack: ffffffff81934000->ffffffff81935000 > (XEN) [2016-05-07 14:33:46] TOTAL: ffffffff80000000->ffffffff81c00000 > (XEN) [2016-05-07 14:33:46] ENTRY ADDRESS: ffffffff817921f0 > (XEN) [2016-05-07 14:33:46] Dom0 has maximum 2 VCPUs > (XEN) [2016-05-07 14:33:47] setup 0000:00:00.2 for d0 failed (-19) > (XEN) [2016-05-07 14:33:47] Scrubbing Free RAM: > ..............................................................................................................done. > (XEN) [2016-05-07 14:33:50] Initial low memory virq threshold set at 0x4000 > pages. > (XEN) [2016-05-07 14:33:50] Std. Loglevel: All > (XEN) [2016-05-07 14:33:50] Guest Loglevel: All > (XEN) [2016-05-07 14:33:50] Xen is relinquishing VGA console. > (XEN) [2016-05-07 14:33:50] *** Serial input -> DOM0 (type 'CTRL-a' three > times to switch input to Xen) > (XEN) [2016-05-07 14:33:50] Freed 284kB init memory. > (XEN) [2016-05-07 14:33:50] traps.c:2514:d0 Domain attempted WRMSR > 0000000000000413 from 0xc008000001000000 to 0x8008000001000000. > (XEN) [2016-05-07 14:33:50] traps.c:2514:d0 Domain attempted WRMSR > 00000000c001020b from 0x0000000000000000 to 0x000000000000ffff. > (XEN) [2016-05-07 14:33:50] traps.c:2514:d0 Domain attempted WRMSR > 0000000000000413 from 0xc008000001000000 to 0x8008000001000000. > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:00.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:00.2 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:01.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:01.1 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:02.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:04.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:10.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:10.1 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:11.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:12.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:12.2 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:13.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:13.2 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:14.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:14.1 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:14.2 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:14.3 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:14.4 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:14.5 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:18.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:18.1 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:18.2 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:18.3 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:18.4 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:00:18.5 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:01:00.0 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:01:00.1 > (XEN) [2016-05-07 14:33:50] PCI add device 0000:02:00.0 > (XEN) [2016-05-07 14:33:51] PCI: Using MCFG for segment 0000 bus 00-ff > (XEN) [2016-05-07 14:34:40] traps.c:2514:d1 Domain attempted WRMSR > 00000000c0010201 from 0x0000000000000000 to 0x000000000000ffff. > (XEN) [2016-05-07 14:35:10] traps.c:2514:d2 Domain attempted WRMSR > 00000000c0010201 from 0x0000000000000000 to 0x000000000000abcd. > (XEN) [2016-05-07 14:35:17] grant_table.c:289:d0 Increased maptrack size to 2 > frames > (d3) [2016-05-07 14:40:40] HVM Loader > (d3) [2016-05-07 14:40:40] Detected Xen v4.4.1 > (d3) [2016-05-07 14:40:40] Xenbus rings @0xfeffc000, event channel 4 > (d3) [2016-05-07 14:40:40] System requested SeaBIOS > (d3) [2016-05-07 14:40:40] CPU speed is 3494 MHz > (d3) [2016-05-07 14:40:40] Relocating guest memory for lowmem MMIO space > disabled > (XEN) [2016-05-07 14:40:40] irq.c:270: Dom3 PCI link 0 changed 0 -> 5 > (d3) [2016-05-07 14:40:40] PCI-ISA link 0 routed to IRQ5 > (XEN) [2016-05-07 14:40:40] irq.c:270: Dom3 PCI link 1 changed 0 -> 10 > (d3) [2016-05-07 14:40:40] PCI-ISA link 1 routed to IRQ10 > (XEN) [2016-05-07 14:40:40] irq.c:270: Dom3 PCI link 2 changed 0 -> 11 > (d3) [2016-05-07 14:40:40] PCI-ISA link 2 routed to IRQ11 > (XEN) [2016-05-07 14:40:40] irq.c:270: Dom3 PCI link 3 changed 0 -> 5 > (d3) [2016-05-07 14:40:40] PCI-ISA link 3 routed to IRQ5 > (d3) [2016-05-07 14:40:40] pci dev 01:3 INTA->IRQ10 > (d3) [2016-05-07 14:40:40] pci dev 02:0 INTA->IRQ11 > (d3) [2016-05-07 14:40:40] pci dev 03:0 INTA->IRQ5 > (d3) [2016-05-07 14:40:40] pci dev 04:0 INTA->IRQ5 > (d3) [2016-05-07 14:40:40] pci dev 1d:0 INTA->IRQ10 > (d3) [2016-05-07 14:40:40] pci dev 1d:1 INTB->IRQ11 > (d3) [2016-05-07 14:40:40] pci dev 1d:2 INTC->IRQ5 > (d3) [2016-05-07 14:40:40] pci dev 1d:7 INTD->IRQ5 > (d3) [2016-05-07 14:40:40] No RAM in high memory; setting high_mem resource > base to 100000000 > (d3) [2016-05-07 14:40:40] pci dev 02:0 bar 14 size 001000000: 0f0000008 > (d3) [2016-05-07 14:40:40] pci dev 05:0 bar 10 size 001000000: 0f1000008 > (d3) [2016-05-07 14:40:40] pci dev 05:0 bar 30 size 000010000: 0f2000000 > (d3) [2016-05-07 14:40:40] pci dev 04:0 bar 14 size 000001000: 0f2010000 > (d3) [2016-05-07 14:40:40] pci dev 05:0 bar 18 size 000001000: 0f2011000 > (d3) [2016-05-07 14:40:40] pci dev 1d:7 bar 10 size 000001000: 0f2012000 > (d3) [2016-05-07 14:40:40] pci dev 03:0 bar 10 size 000000400: 00000c001 > (d3) [2016-05-07 14:40:40] pci dev 02:0 bar 10 size 000000100: 00000c401 > (d3) [2016-05-07 14:40:40] pci dev 03:0 bar 14 size 000000100: 00000c501 > (d3) [2016-05-07 14:40:40] pci dev 04:0 bar 10 size 000000020: 00000c601 > (d3) [2016-05-07 14:40:40] pci dev 1d:0 bar 20 size 000000020: 00000c621 > (d3) [2016-05-07 14:40:40] pci dev 1d:1 bar 20 size 000000020: 00000c641 > (d3) [2016-05-07 14:40:40] pci dev 1d:2 bar 20 size 000000020: 00000c661 > (d3) [2016-05-07 14:40:40] pci dev 01:1 bar 20 size 000000010: 00000c681 > (d3) [2016-05-07 14:40:40] Multiprocessor initialisation: > (d3) [2016-05-07 14:40:40] - CPU0 ... 48-bit phys ... fixed MTRRs ... var > MTRRs [2/8] ... done. > (d3) [2016-05-07 14:40:40] - CPU1 ... 48-bit phys ... fixed MTRRs ... var > MTRRs [2/8] ... done. > (d3) [2016-05-07 14:40:40] Writing SMBIOS tables ... > (d3) [2016-05-07 14:40:40] Loading SeaBIOS ... > (d3) [2016-05-07 14:40:40] Creating MP tables ... > (d3) [2016-05-07 14:40:40] Loading ACPI ... > (d3) [2016-05-07 14:40:40] vm86 TSS at fc00a080 > (d3) [2016-05-07 14:40:40] BIOS map: > (d3) [2016-05-07 14:40:40] 10000-100d3: Scratch space > (d3) [2016-05-07 14:40:40] c0000-fffff: Main BIOS > (d3) [2016-05-07 14:40:40] E820 table: > (d3) [2016-05-07 14:40:40] [00]: 00000000:00000000 - 00000000:000a0000: RAM > (d3) [2016-05-07 14:40:40] HOLE: 00000000:000a0000 - 00000000:000c0000 > (d3) [2016-05-07 14:40:40] [01]: 00000000:000c0000 - 00000000:00100000: > RESERVED > (d3) [2016-05-07 14:40:40] [02]: 00000000:00100000 - 00000000:7e000000: RAM > (d3) [2016-05-07 14:40:40] HOLE: 00000000:7e000000 - 00000000:fc000000 > (d3) [2016-05-07 14:40:40] [03]: 00000000:fc000000 - 00000001:00000000: > RESERVED > (d3) [2016-05-07 14:40:40] Invoking SeaBIOS ... > (d3) [2016-05-07 14:40:40] SeaBIOS (version 1.7.5-20140531_083030-gandalf) > (d3) [2016-05-07 14:40:40] > (d3) [2016-05-07 14:40:40] Found Xen hypervisor signature at 40000000 > (d3) [2016-05-07 14:40:40] Running on QEMU (i440fx) > (d3) [2016-05-07 14:40:40] xen: copy e820... > (d3) [2016-05-07 14:40:40] Relocating init from 0x000dfbd9 to 0x7dfaeaf0 > (size 70732) > (d3) [2016-05-07 14:40:40] CPU Mhz=3494 > (d3) [2016-05-07 14:40:40] Found 12 PCI devices (max PCI bus is 00) > (d3) [2016-05-07 14:40:40] Allocated Xen hypercall page at 7dfff000 > (d3) [2016-05-07 14:40:40] Detected Xen v4.4.1 > (d3) [2016-05-07 14:40:40] xen: copy BIOS tables... > (d3) [2016-05-07 14:40:40] Copying SMBIOS entry point from 0x00010010 to > 0x000f1010 > (d3) [2016-05-07 14:40:40] Copying MPTABLE from 0xfc001150/fc001160 to > 0x000f0f10 > (d3) [2016-05-07 14:40:40] Copying PIR from 0x00010030 to 0x000f0e90 > (d3) [2016-05-07 14:40:40] Copying ACPI RSDP from 0x000100b0 to 0x000f0e60 > (d3) [2016-05-07 14:40:40] Using pmtimer, ioport 0xb008 > (d3) [2016-05-07 14:40:40] Scan for VGA option rom > (d3) [2016-05-07 14:40:40] Running option rom at c000:0003 > (XEN) [2016-05-07 14:40:40] stdvga.c:147:d3 entering stdvga and caching modes > (d3) [2016-05-07 14:40:40] pmm call arg1=0 > (d3) [2016-05-07 14:40:40] Turning on vga text mode console > (d3) [2016-05-07 14:40:40] SeaBIOS (version 1.7.5-20140531_083030-gandalf) > (d3) [2016-05-07 14:40:40] Machine UUID 34b81000-3ba9-4231-9c72-b00d099755d4 > (d3) [2016-05-07 14:40:40] EHCI init on dev 00:1d.7 (regs=0xf2012020) > (d3) [2016-05-07 14:40:40] Found 0 lpt ports > (d3) [2016-05-07 14:40:40] Found 1 serial ports > (d3) [2016-05-07 14:40:40] ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9) > (d3) [2016-05-07 14:40:40] ATA controller 2 at 170/374/0 (irq 15 dev 9) > (d3) [2016-05-07 14:40:40] ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (16384 > MiBytes) > (d3) [2016-05-07 14:40:40] Searching bootorder for: > /pci@i0cf8/*@1,1/drive@0/disk@0 > (d3) [2016-05-07 14:40:40] ata0-1: QEMU HARDDISK ATA-7 Hard-Disk (8192 > MiBytes) > (d3) [2016-05-07 14:40:40] Searching bootorder for: > /pci@i0cf8/*@1,1/drive@0/disk@1 > (d3) [2016-05-07 14:40:40] UHCI init on dev 00:1d.0 (io=c620) > (d3) [2016-05-07 14:40:40] UHCI init on dev 00:1d.1 (io=c640) > (d3) [2016-05-07 14:40:40] UHCI init on dev 00:1d.2 (io=c660) > (d3) [2016-05-07 14:40:40] PS2 keyboard initialized > (d3) [2016-05-07 14:40:40] All threads complete. > (d3) [2016-05-07 14:40:40] Scan for option roms > (d3) [2016-05-07 14:40:40] > (d3) [2016-05-07 14:40:40] Press F12 for boot menu. > (d3) [2016-05-07 14:40:40] > (d3) [2016-05-07 14:40:43] Searching bootorder for: HALT > (d3) [2016-05-07 14:40:43] drive 0x000f0e10: PCHS=16383/16/63 translation=lba > LCHS=1024/255/63 s=33554432 > (d3) [2016-05-07 14:40:43] drive 0x000f0de0: PCHS=16383/16/63 translation=lba > LCHS=1024/255/63 s=16777216 > (d3) [2016-05-07 14:40:43] Space available for UMB: c9800-ef000, f0000-f0de0 > (d3) [2016-05-07 14:40:43] Returned 258048 bytes of ZoneHigh > (d3) [2016-05-07 14:40:43] e820 map has 6 items: > (d3) [2016-05-07 14:40:43] 0: 0000000000000000 - 000000000009fc00 = 1 RAM > (d3) [2016-05-07 14:40:43] 1: 000000000009fc00 - 00000000000a0000 = 2 > RESERVED > (d3) [2016-05-07 14:40:43] 2: 00000000000f0000 - 0000000000100000 = 2 > RESERVED > (d3) [2016-05-07 14:40:43] 3: 0000000000100000 - 000000007dfff000 = 1 RAM > (d3) [2016-05-07 14:40:43] 4: 000000007dfff000 - 000000007e000000 = 2 > RESERVED > (d3) [2016-05-07 14:40:43] 5: 00000000fc000000 - 0000000100000000 = 2 > RESERVED > (d3) [2016-05-07 14:40:43] enter handle_19: > (d3) [2016-05-07 14:40:43] NULL > (d3) [2016-05-07 14:40:43] Booting from Hard Disk... > (d3) [2016-05-07 14:40:43] Booting from 0000:7c00 > (XEN) [2016-05-07 14:40:55] irq.c:373: Dom3 callback via changed to Direct > Vector 0xf3 > (XEN) [2016-05-07 14:40:55] irq.c:270: Dom3 PCI link 0 changed 5 -> 0 > (XEN) [2016-05-07 14:40:55] irq.c:270: Dom3 PCI link 1 changed 10 -> 0 > (XEN) [2016-05-07 14:40:55] irq.c:270: Dom3 PCI link 2 changed 11 -> 0 > (XEN) [2016-05-07 14:40:55] irq.c:270: Dom3 PCI link 3 changed 5 -> 0 > (XEN) [2016-05-07 14:42:49] grant_table.c:289:d0 Increased maptrack size to 3 > frames > (XEN) [2016-05-07 14:42:59] grant_table.c:289:d0 Increased maptrack size to 4 > frames > (XEN) [ 0.000000] Xen version 4.6.0 (Debian 4.6.0-1+nmu2) (ijc@xxxxxxxxxx) > (gcc (Debian 5.3.1-8) 5.3.1 20160205) debug=n Tue Feb 9 17:46:27 UTC 2016 > (XEN) [ 0.000000] Bootloader: GRUB 2.02~beta2-22+deb8u1 > (XEN) [ 0.000000] Command line: placeholder reboot=no loglvl=all > guest_loglvl=all ivrs_ioapic[0]=00:14.0 irq_ratelimit dom0_mem=4194304 > dom0_vcpus_pin=true dom0_max_vcpus=2 vcpu_migration_delay=1000 > shed_smt_powersavings=false cpufreq=xen vpmu=off noserialnumber=true > console=vga console_timestamps=boot vga=text-80x30 > (XEN) [ 0.000000] Video information: > (XEN) [ 0.000000] VGA is text mode 80x30, font 8x16 > (XEN) [ 0.000000] VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) [ 0.000000] Disc information: > (XEN) [ 0.000000] Found 2 MBR signatures > (XEN) [ 0.000000] Found 2 EDD information structures > (XEN) [ 0.000000] Xen-e820 RAM map: > (XEN) [ 0.000000] 0000000000000000 - 000000000009e800 (usable) > (XEN) [ 0.000000] 000000000009e800 - 00000000000a0000 (reserved) > (XEN) [ 0.000000] 00000000000e0000 - 0000000000100000 (reserved) > (XEN) [ 0.000000] 0000000000100000 - 000000008cefa000 (usable) > (XEN) [ 0.000000] 000000008cefa000 - 000000008cf2a000 (reserved) > (XEN) [ 0.000000] 000000008cf2a000 - 000000008d1ed000 (usable) > (XEN) [ 0.000000] 000000008d1ed000 - 000000008d2b9000 (ACPI NVS) > (XEN) [ 0.000000] 000000008d2b9000 - 000000008e1c7000 (reserved) > (XEN) [ 0.000000] 000000008e1c7000 - 000000008e1c8000 (usable) > (XEN) [ 0.000000] 000000008e1c8000 - 000000008e3ce000 (ACPI NVS) > (XEN) [ 0.000000] 000000008e3ce000 - 000000008e850000 (usable) > (XEN) [ 0.000000] 000000008e850000 - 000000008efe1000 (reserved) > (XEN) [ 0.000000] 000000008efe1000 - 000000008f000000 (usable) > (XEN) [ 0.000000] 00000000fec00000 - 00000000fec01000 (reserved) > (XEN) [ 0.000000] 00000000fec10000 - 00000000fec11000 (reserved) > (XEN) [ 0.000000] 00000000fed00000 - 00000000fed01000 (reserved) > (XEN) [ 0.000000] 00000000fed80000 - 00000000fed90000 (reserved) > (XEN) [ 0.000000] 00000000ff000000 - 0000000100000000 (reserved) > (XEN) [ 0.000000] 0000000100000000 - 000000044f000000 (usable) > (XEN) [ 0.000000] ACPI: RSDP 000F0490, 0024 (r2 ALASKA) > (XEN) [ 0.000000] ACPI: XSDT 8D271080, 0084 (r1 ALASKA A M I 1072009 > AMI 10013) > (XEN) [ 0.000000] ACPI: FACP 8D277208, 010C (r5 ALASKA A M I 1072009 > AMI 10013) > (XEN) [ 0.000000] ACPI Warning (tbfadt-0464): Optional field > "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] > (XEN) [ 0.000000] ACPI: DSDT 8D2711A0, 6067 (r2 ALASKA A M I 0 > INTL 20051117) > (XEN) [ 0.000000] ACPI: FACS 8D2AE080, 0040 > (XEN) [ 0.000000] ACPI: APIC 8D277318, 0072 (r3 ALASKA A M I 1072009 > AMI 10013) > (XEN) [ 0.000000] ACPI: FPDT 8D277390, 0044 (r1 ALASKA A M I 1072009 > AMI 10013) > (XEN) [ 0.000000] ACPI: MCFG 8D2773D8, 003C (r1 ALASKA A M I 1072009 > MSFT 10013) > (XEN) [ 0.000000] ACPI: HPET 8D277418, 0038 (r1 ALASKA A M I 1072009 > AMI 5) > (XEN) [ 0.000000] ACPI: IVRS 8D277450, 0068 (r2 AMD BANTRY 1 > AMD 0) > (XEN) [ 0.000000] ACPI: SSDT 8D2774B8, 0B9C (r1 AMD BANTRY 1 > AMD 1) > (XEN) [ 0.000000] ACPI: SSDT 8D278058, 04B7 (r2 AMD BANTRY 1 > MSFT 4000000) > (XEN) [ 0.000000] ACPI: CRAT 8D278510, 0578 (r1 AMD BANTRY 1 > AMD 1) > (XEN) [ 0.000000] ACPI: SSDT 8D278A88, 1459 (r1 AMD CPMDFIGP 1 > INTL 20051117) > (XEN) [ 0.000000] ACPI: SSDT 8D279EE8, 0852 (r1 AMD CPMDFDGP 1 > INTL 20051117) > (XEN) [ 0.000000] ACPI: SSDT 8D27A740, 122C (r1 AMD CPMCMN 1 > INTL 20051117) > (XEN) [ 0.000000] System RAM: 15813MB (16193524kB) > (XEN) [ 0.000000] No NUMA configuration found > (XEN) [ 0.000000] Faking a node at 0000000000000000-000000044f000000 > (XEN) [ 0.000000] Domain heap initialised > (XEN) [ 0.000000] found SMP MP-table at 000fd7e0 > (XEN) [ 0.000000] DMI 2.7 present. > (XEN) [ 0.000000] Using APIC driver default > (XEN) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > (XEN) [ 0.000000] ACPI: v5 SLEEP INFO: control[0:0], status[0:0] > (XEN) [ 0.000000] ACPI: SLEEP INFO: pm1x_cnt[1:804,1:0], > pm1x_evt[1:800,1:0] > (XEN) [ 0.000000] ACPI: 32/64X FACS address mismatch in FADT - > 8d2ae080/0000000000000000, using 32 > (XEN) [ 0.000000] ACPI: wakeup_vec[8d2ae08c], vec_size[20] > (XEN) [ 0.000000] ACPI: Local APIC address 0xfee00000 > (XEN) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) > (XEN) [ 0.000000] Processor #16 5:3 APIC version 16 > (XEN) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) > (XEN) [ 0.000000] Processor #17 5:3 APIC version 16 > (XEN) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) > (XEN) [ 0.000000] Processor #18 5:3 APIC version 16 > (XEN) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) > (XEN) [ 0.000000] Processor #19 5:3 APIC version 16 > (XEN) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > (XEN) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > (XEN) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, > GSI 0-23 > (XEN) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low > level) > (XEN) [ 0.000000] ACPI: IRQ0 used by override. > (XEN) [ 0.000000] ACPI: IRQ2 used by override. > (XEN) [ 0.000000] ACPI: IRQ9 used by override. > (XEN) [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 > (XEN) [ 0.000000] ERST table was not found > (XEN) [ 0.000000] Using ACPI (MADT) for SMP configuration information > (XEN) [ 0.000000] SMP: Allowing 4 CPUs (0 hotplug CPUs) > (XEN) [ 0.000000] IRQ limits: 24 GSI, 760 MSI/MSI-X > (XEN) [ 0.000000] xstate_init: using cntxt_size: 0x3c0 and states: > 0x4000000000000007 > (XEN) [ 0.000000] AMD Fam15h machine check reporting enabled > (XEN) [ 0.000000] Using scheduler: SMP Credit Scheduler (credit) > (XEN) [ 0.477516] Detected 3493.700 MHz processor. > (XEN) [ 0.481176] Initing memory sharing. > (XEN) [ 0.482626] alt table ffff82d0802bd010 -> ffff82d0802be240 > (XEN) [ 0.484140] PCI: MCFG configuration 0: base e0000000 segment 0000 > buses 00 - ff > (XEN) [ 0.487043] PCI: Not using MCFG for segment 0000 bus 00-ff > (XEN) [ 0.607744] AMD-Vi: Disabled HAP memory map sharing with IOMMU > (XEN) [ 0.609447] AMD-Vi: IOMMU Extended Features: > (XEN) [ 0.610807] - Prefetch Pages Command > (XEN) [ 0.612169] - Peripheral Page Service Request > (XEN) [ 0.613530] - Guest Translation > (XEN) [ 0.614892] - Invalidate All Command > (XEN) [ 0.616320] AMD-Vi: IOMMU 0 Enabled. > (XEN) [ 0.624841] I/O virtualisation enabled > (XEN) [ 0.626224] - Dom0 mode: Relaxed > (XEN) [ 0.627587] Interrupt remapping enabled > (XEN) [ 0.629149] ENABLING IO-APIC IRQs > (XEN) [ 0.630509] -> Using new ACK method > (XEN) [ 0.632079] ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) [ 1.712519] Platform timer is 14.318MHz HPET > (XEN) [ 1.714006] Allocated console ring of 32 KiB. > (XEN) [ 1.715458] mwait-idle: does not run on family 21 model 19 > (XEN) [ 1.716913] HVM: ASIDs enabled. > (XEN) [ 1.718363] SVM: Supported advanced features: > (XEN) [ 1.719811] - Nested Page Tables (NPT) > (XEN) [ 1.721260] - Last Branch Record (LBR) Virtualisation > (XEN) [ 1.722710] - Next-RIP Saved on #VMEXIT > (XEN) [ 1.724159] - VMCB Clean Bits > (XEN) [ 1.725560] - DecodeAssists > (XEN) [ 1.726921] - Pause-Intercept Filter > (XEN) [ 1.728283] - TSC Rate MSR > (XEN) [ 1.729643] HVM: SVM enabled > (XEN) [ 1.731004] HVM: Hardware Assisted Paging (HAP) detected > (XEN) [ 1.732400] HVM: HAP page sizes: 4kB, 2MB, 1GB > (XEN) [ 1.733849] HVM: PVH mode not supported on this platform > (XEN) [ 1.796326] Brought up 4 CPUs > (XEN) [ 1.818354] ACPI sleep modes: S3 > (XEN) [ 1.819810] VPMU: disabled > (XEN) [ 1.821260] MCA: Use hw thresholding to adjust polling frequency > (XEN) [ 1.822710] mcheck_poll: Machine check polling timer started. > (XEN) [ 1.824175] Dom0 has maximum 408 PIRQs > (XEN) [ 1.825662] NX (Execute Disable) protection active > (XEN) [ 1.827026] *** LOADING DOMAIN 0 *** > (XEN) [ 1.912126] Xen kernel: 64-bit, lsb, compat32 > (XEN) [ 1.913576] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> > 0x1922000 > (XEN) [ 1.916573] PHYSICAL MEMORY ARRANGEMENT: > (XEN) [ 1.918023] Dom0 alloc.: 000000041e000000->0000000420000000 > (1038434 pages to be allocated) > (XEN) [ 1.920932] Init. ramdisk: 000000044e862000->000000044efff5a7 > (XEN) [ 1.922383] VIRTUAL MEMORY ARRANGEMENT: > (XEN) [ 1.923832] Loaded kernel: ffffffff81000000->ffffffff81922000 > (XEN) [ 1.925251] Init. ramdisk: 0000000000000000->0000000000000000 > (XEN) [ 1.926613] Phys-Mach map: 0000008000000000->0000008000800000 > (XEN) [ 1.927974] Start info: ffffffff81922000->ffffffff819224b4 > (XEN) [ 1.929344] Page tables: ffffffff81923000->ffffffff81934000 > (XEN) [ 1.930713] Boot stack: ffffffff81934000->ffffffff81935000 > (XEN) [ 1.932093] TOTAL: ffffffff80000000->ffffffff81c00000 > (XEN) [ 1.933544] ENTRY ADDRESS: ffffffff817921f0 > (XEN) [ 1.935350] Dom0 has maximum 2 VCPUs > (XEN) [ 2.393242] setup 0000:00:00.2 for d0 failed (-19) > (XEN) [ 2.397924] Scrubbing Free RAM on 1 nodes using 2 CPUs > (XEN) [ 2.441180] > .....................................................................done. > (XEN) [ 4.438766] Initial low memory virq threshold set at 0x4000 pages. > (XEN) [ 4.440218] Std. Loglevel: All > (XEN) [ 4.441601] Guest Loglevel: All > (XEN) [ 4.442960] Xen is relinquishing VGA console. > (XEN) [ 4.444393] *** Serial input -> DOM0 (type 'CTRL-a' three times to > switch input to Xen) > (XEN) [ 4.444445] Freed 288kB init memory. > (XEN) [ 5.324611] PCI add device 0000:00:00.0 > (XEN) [ 5.324819] PCI add device 0000:00:00.2 > (XEN) [ 5.325020] PCI add device 0000:00:01.0 > (XEN) [ 5.325206] PCI add device 0000:00:01.1 > (XEN) [ 5.325390] PCI add device 0000:00:02.0 > (XEN) [ 5.325612] PCI add device 0000:00:04.0 > (XEN) [ 5.326018] PCI add device 0000:00:10.0 > (XEN) [ 5.326375] PCI add device 0000:00:10.1 > (XEN) [ 5.326655] PCI add device 0000:00:11.0 > (XEN) [ 5.326858] PCI add device 0000:00:12.0 > (XEN) [ 5.327121] PCI add device 0000:00:12.2 > (XEN) [ 5.327349] PCI add device 0000:00:13.0 > (XEN) [ 5.327624] PCI add device 0000:00:13.2 > (XEN) [ 5.327824] PCI add device 0000:00:14.0 > (XEN) [ 5.328034] PCI add device 0000:00:14.1 > (XEN) [ 5.328310] PCI add device 0000:00:14.2 > (XEN) [ 5.328518] PCI add device 0000:00:14.3 > (XEN) [ 5.328677] PCI add device 0000:00:14.4 > (XEN) [ 5.328885] PCI add device 0000:00:14.5 > (XEN) [ 5.329009] PCI add device 0000:00:18.0 > (XEN) [ 5.329113] PCI add device 0000:00:18.1 > (XEN) [ 5.329222] PCI add device 0000:00:18.2 > (XEN) [ 5.329347] PCI add device 0000:00:18.3 > (XEN) [ 5.329446] PCI add device 0000:00:18.4 > (XEN) [ 5.329545] PCI add device 0000:00:18.5 > (XEN) [ 5.329891] PCI add device 0000:01:00.0 > (XEN) [ 5.330099] PCI add device 0000:01:00.1 > (XEN) [ 5.331735] PCI add device 0000:02:00.0 > (XEN) [ 5.497420] PCI: Using MCFG for segment 0000 bus 00-ff > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxx > http://lists.xen.org/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |