[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] [Xen-devel] ARM: Xen 4.11 + modern dom0 on ODROID-XU4/HC1 (Exynos 5422)



On 01/09/18 09:45, Steve Dodd wrote:
Hi all,

Hello Steve,

Having successfully followed the instructions at
https://wiki.odroid.com/odroid-xu4/application_note/software/xen_virtualization
to get an old Xen and dom0 kernel working on my ODROID HC1 I'd like to
get a more modern setup working.

I managed to get the 4.11 hypervisor to boot happily with the bits of
https://github.com/bkrepo/xen/commit/8d56205455a4a1e0233421d3ee98e3c7dee20bd2
that deal with the CPU initialization (the trap/hypercall change seems
to already be a part of 4.11 in a different form.) Any chance of
getting this patch merged?
AFAICT the patch can be divided in two:
        1) Dom0 SMC forward
While we did some work around trapping SMC, we still don't forward them directly to the firmware. If you need to forward Dom0 SMC call to the firmware, then we first need to know what they are used for. I would prefer a whilelisting over forward everything (even for Dom0).
        2) SMP support for Odroid-XU
This part would need to be cleaned up. We need to ensure the SMP bring-up is still working with the other exynos platform.

Feel free to send patches on xen-devel, I would be happy to review them.


What I am completely stuck on is getting a modern dom0 working. The
handful of patches in
https://github.com/bkrepo/linux-dom0/commits/odroidxu3-3.10.y-xen seem
only to enable the relevant config options, patch the device tree with
the arch timer and "xen-dom0" passthrough section, and backport the
PSCI support which is already in 4.14, so I've tried applying these
changes to the ODROID 4.14 tree at
https://github.com/hardkernel/linux, with no success.

Using the FDT from the working 3.x dom0 with the 4.14 zImage, it boots
but doesn't seem to find any of the underlying hardware, certainly not
the USB attached SSD which I need to boot.

I would not recommend to use the 3.x FDT with 4.14. Despite the DT should be agnostic to the kernel revision, there are still often changes binding changes.


Using the FDT from the ODROID 4.14 tree, patched for arch timer and
the xen-dom0 section, the hypervisor sticks at "(XEN) 3..."

I am not entirely sure to understand why you need to patch the arch timer. Could you send the diff of the FDT?

I would also recommend to make sure the same configuration boots without Xen. This will tell you whether the bug is in Xen or Linux.


Unfortunately I'm not at all familiar with either Xen or the ARM
architecture, so would really appreciate it if anyone could steer me
in the right direction!

I hope I provided enough details. Feel free to ask any questions.

Cheers,

--
Julien Grall

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.