[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] How to boot domU and dom0 from a device tree



Hi,

On 11/06/2019 21:23, Denis Obrezkov wrote:
I agree I just don't know the right way for attachments on MLs

Text file are commonly posted on pastebin like website and then linked in the thread. For bigger/binary files, you can either use google driver or upload to your own website (if you have own).

Cheers,


On 6/11/19 9:48 PM, Julien Grall wrote:


On 11/06/2019 20:02, Denis Obrezkov wrote:
It seems I can't attach big files in xen mailing list, here the images are:
https://drive.google.com/file/d/1yhVQhqa0HQr8tOYIpr9FXPXPw-65vibN/view?usp=sharing

Sending any attachment on the ML is strongly not recommended. Anything,
you send as an attachment will be stored in the mail account of each
person subscribed on the ML.

To give an example, your attachment is 9MB in total (compress), if you
had only 1024 users subscribed, this would mean 9G of disk used...

Cheers,


On 6/11/19 8:20 PM, Denis Obrezkov wrote:
Ok,
Linux 4.20.11
xen 4.12.0

Their configs are default (defconfig for Linux).

maybe I should use a newer kernel.
I will try it soon.

On 6/11/19 6:09 PM, Stefano Stabellini wrote:
Hi Denis,

I cannot spot anything wrong looking at the device tree configuration.
Could you please provide:

- the original device tree
- all the binaries, including Xen, Linux, ramdisks
- the exact version of Xen and Linux you used
- the Xen and Linux kconfig (xen/.config for Xen and .config for Linux)
- the QEMU command line (if you are using QEMU)

I'll try to repro the issue here.


On Tue, 11 Jun 2019, Denis Obrezkov wrote:
Hi,

I don't think it's the memory issue:

(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
(XEN) *** LOADING DOMU cpus=1 memory=a00000KB ***
(XEN) Loading Domd1 kernel from boot module @ 0000000043000000
(XEN) Loading ramdisk from boot module @ 0000000048000000
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Out of memory
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...

On 6/11/19 2:57 PM, Julien Grall wrote:
On 10/06/2019 22:24, Denis Obrezkov wrote:

Hi Denis,

On 6/10/19 10:30 PM, Stefano Stabellini wrote:
On Mon, 10 Jun 2019, Denis Obrezkov wrote:
Also, I found out how to pass the amount of memory for dom0. And I
passed 256M. And I can see that in a device tree there is a memory node
with 4096M allocated. So, I don't understand why I have this error:

This is easy, the answer is below.


(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading Domd0 kernel from boot module @ 0000000047000000
(XEN) Loading ramdisk from boot module @ 0000000042000000
(XEN) Allocating 1:1 mappings totalling 256MB for dom0:
(XEN) BANK[0] 0x00000050000000-0x00000060000000 (256MB)
(XEN) Grant table range: 0x00000049000000-0x00000049040000
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading zImage from 0000000138000000 to
0000000050080000-00000000512d1a00
(XEN) Loading dom0 initrd from 0000000042000000 to
0x0000000058200000-0x000000005831b680
(XEN) Loading dom0 DTB to 0x0000000058000000-0x0000000058001da8
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Scrubbing Free RAM in background
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) ***************************************************
(XEN) No support for ARM_SMCCC_ARCH_WORKAROUND_1.
(XEN) Please update your firmware.
(XEN) ***************************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch
input)
(XEN) *** LOADING DOMU cpus=1 memory=140000KB ***
(XEN) Loading Domd1 kernel from boot module @ 0000000043000000
(XEN) Loading ramdisk from boot module @ 0000000048000000
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Out of memory
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...

fdt commands passed via u-boot:

setenv xen_bootargs 'dom0_mem=256M'

You just need to give more memory to dom0. Use dom0_mem=1G or something
like that for a start.
But as far as I understand domU doesn't have enough memory and
fails.     I
change dom0_mem to 1G but the problem still exists.

You are right, the problem is from DomU not Dom0...



fdt addr 0x44000000
fdt resize
fdt set /chosen \#address-cells <1>
fdt set /chosen \#size-cells <1>
fdt set /chosen xen,xen-bootargs \"$xen_bootargs\"
fdt mknod /chosen module@0
fdt set /chosen/module@0 compatible "xen,linux-zimage"
"xen,multiboot-module"
fdt set /chosen/module@0 reg <0x47000000 0x7cc561>
fdt set /chosen/module@0 bootargs "rw root=/dev/ram rdinit=/sbin/init
earlyprintk=serial,ttyAMA0 console=hvc0 earlycon=xenboot"
fdt mknod /chosen module@1
fdt set /chosen/module@1 compatible "xen,linux-initrd"
"xen,multiboot-module"
fdt set /chosen/module@1 reg <0x42000000 0x11b680>

fdt mknod /chosen domU1
fdt set /chosen/domU1 compatible "xen,domain"
fdt set /chosen/domU1 \#address-cells <1>
fdt set /chosen/domU1 \#size-cells <1>
fdt set /chosen/domU1 \cpus <1>
fdt set /chosen/domU1 \memory <0 1310720>

... this property is used to tell how much memory the guest domU1 has. I
am a bit surprised that 136MB of RAM is not enough, but you could try to
bump it to 512MB or even 1GB and see.

Cheers,


--
Regards, Denis Obrezkov






--
Julien Grall

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.