Re: [Wg-test-framework] rimava0

["Paul L. George" <pgeorge@xxxxxxxxxx>]

Ian, 

When George plugged the mnitor  into the server it was at the BIOS Screen so
you must have been able to enter something.  He rebooted it with the laptop
connected to the serial port and was able to control the BIOS.  I had him
reseat the serial adaptor and the cat5 cable on both ends. Later in the day
DonK said he still could not see it.  I am going to swap out the cable and
adaptor.  If that does not work I will switch ports to Gateshead comtrol
patch panel.

Paul

-----Original Message-----
From: Ian Jackson [mailto:Ian.Jackson@xxxxxxxxxxxxx] 
Sent: Tuesday, May 05, 2015 2:43 PM
To: Paul L. George; wg-test-framework@xxxxxxxxxxxxxxxxxxxx
Subject: Re: rimava0

Ian Jackson writes ("rimava0"):
> I am having difficulty getting any life out of rimava0.
> 
> I'm talking to it with
>   ssh -vt root@xxxxxxxxxxxxxxxx picocom -b115200 /dev/ttyRP27 and I 
> have instructed pdu1 to turn it off, and about 15 seconds later, turn 
> it on.  I see no response on the serial port.
> 
> Could you please investigate ?  (On Tuesday.)

Do you think anyone will be able to look at this today ?

Thanks,
Ian.


_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework