Re: [Wg-test-framework] May 13th XenProject - AllNet call

[Don Koch <dkoch@xxxxxxxxxxx>]

On Thu, 14 May 2015 09:04:18 -0400
Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> wrote:

> Paul L. George writes ("RE: [Wg-test-framework] May 13th XenProject - AllNet 
> call"):
> > I moved the lines back to Oseleta 0/1 and replaced the rimava 0 = tty 28
> > and rimava 1 = tty 32 lines with tested cables plus on rimava0 I used a
> > straight thru cable and a factory null Modem connector.  I tested this cable
> > with my laptop connected to the serial port and it seemed to work. In Rimava
> > 1 I used a tested cable with a null modem adaptor we made.  Both passed the
> > loop back test.  I tired several BIOS settings but the original settings
> > were correct.
> 
> Did you (or Don) do any tests with the serial connected to the
> Rocketport lines ?

I checked the lines Paul put back. Both oseleta lines work (and I'll be updating
my script). The rimava lines are still dead. I'm hoping to go by the colo this 
afternoon.

-d

> > I also heard something rebooting when I was nowhere near the rack.  I
> > assumed it was just a test restarting one of the servers. I heard it once
> > about 17:20 my time and again about at about 18:00.  If it was something
> > caused let me know.  I am being as careful as I can be in a rack full of
> > wires. I am paranoid now so any thing I hear that is not normal causes me to
> > check all the servers to see if they are rebooting.
> 
> Right.  Rebooting machines is normal for osstest.  One every few
> minutes.  Thanks for being careful and reporting your observations.
> 
> Thanks,
> Ian.
> 

_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework