Re: [Wg-test-framework] ThunderX machines (for the Xen Project OSSTEST Test Lab) [and 1 more messages]

[Frank Motta <frank@xxxxxxxxxxxxxxxxxxxxxxx>]

Ian,
        In reading through this, it appears that you are having OS boot issues.
        Can you provide me with:
        - the complete output from the serial console (the DB9 connector above 
the VGA) - from cold power on until the failure
        - a screen capture of the BMC WebUI which contains the version 
information


        Which version(s) OS are you booting natively and which are the guests?



-------------------------------------------------------------------------------------------------------------
Frank Motta
Field Applications Engineer for Cavium
408-943-7615 (O)  510-757-8909 (C) 
Phoenics Electronics

www.phoenicselectronics.com 
Proudly celebrating over 10 years supporting Cavium customers

-----Original Message-----
From: Ian Jackson [mailto:ian.jackson@xxxxxxxxxxxxx] 
Sent: Thursday, February 9, 2017 5:23 AM
To: Steve Wilson <steve@xxxxxxxxxxxxxxxxxxxxxxx>; Lars Kurth 
<lars.kurth@xxxxxxxxxx>; Alena Hyde <alena@xxxxxxxxxxxxxxxxxxxxxxx>; 
ypatel@xxxxxxxxxxx; Frank Motta <frank@xxxxxxxxxxxxxxxxxxxxxxx>; Julien Grall 
<julien.grall@xxxxxxx>; wg-test-framework@xxxxxxxxxxxxxxxxxxxx
Subject: Re: [Wg-test-framework] ThunderX machines (for the Xen Project OSSTEST 
Test Lab) [and 1 more messages]

Ian Jackson writes ("Re: [Wg-test-framework] ThunderX machines (for the Xen 
Project OSSTEST Test Lab)"):
> Right.  OK.  That is fine then.

I think in terms of my technical questions, then, that leaves only
this:

Ian Jackson writes ("Re: [Wg-test-framework] ThunderX machines (for the Xen 
Project OSSTEST Test Lab)"):
> Sorry about the opaque terminology.
> 
> What I mean is that (with appropriate configuration) exiting from a 
> UEFI bootloader (acquired via tftp according to a dhcp next-server
> field) causes the firmware to try the next boot option (which in our 
> case will be to boot from the hard disk).
> 
> This allows us to control whether the machine boots the OS on the hard 
> disk by adjusting the configuration files for the network bootloader 
> (grub), without having to execute code on the host.  (This is 
> necessary because a previous test might have loaded code onto the host 
> hard disk which prevents a hard disk boot.)
> 
> We have seen one hardware/firmware combination where exiting the UEFI 
> grub bootloader causes the host to crash.  Would be regarded by you as 
> a firmware bug ?

Thanks,
Ian.

_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework