[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] vif_addip
> This is how I try to add the address: > xc_dom_control.py vif_addip 1 0 192.168.250.60 > > But no address apears: > eth0 Link encap:Ethernet HWaddr AA:00:00:2F:57:69 > inet addr:169.254.1.1 Bcast:169.254.255.255 Mask:255.255.0.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:97 errors:0 dropped:0 overruns:0 frame:0 > TX packets:74 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:9906 (9.6 Kb) TX bytes:11273 (11.0 Kb) "xc_dom_control.py vif_addip" tells Xen about the new address, but you'll still need to configure it in the domain with ifconfig. > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:12 errors:0 dropped:0 overruns:0 frame:0 > TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:737 (737.0 b) TX bytes:737 (737.0 b) > > I suppose that the command "xc_dom_control.py vif_addip 1 0 192.168.250.60" > only make internal routing. > So I added manualy the ip address, but it still not answering. >From within domain 1, did you ifconfig an alias with something like the following? ifconfig eth0:60 192.168.250.60 netmask 255.255.0.0 You should then be able to ping 192.168.250.60 from within domain 1, domain 0, and other the machines on the LAN. Ian > Thank you. > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/xen-devel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |