[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] cmdline_ip
> I want to add many ip addresses from the config file. > I tried this: > > cmdline_ip = > "ip="+vfr_ipaddr[0]+":"+nfsserv+":"+gateway+":"+netmask+"::eth0"+vfr_ipaddr[1]+":"+nfsserv+":"+gateway+":"+netmask+"::eth0:60" > > But I get the following error: > IP-Config: Device `eth0192.168.250' not found. I'm afraid this is a standard Linux limitation : it's only possible to configure one IP address on the kernel command line. Further addresses have to be configured manually, or by the /etc/rc scripts. Under RH9, the normal way of doing this would be to create an /etc/sysconfig/network-scripts/ifcfg-eth0:60 file something like: DEVICE=eth0:60 IPADDR=192.168.250.60 Ian ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |