[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] issues getting more than 16M ram to be used without oopsing. 1.2 and 1.3-unstable
Sounds great! I'll drop in the Intel then. The latest fixes that you posted are still showing memory corruption symptoms. Different point again, so the driver is probably just being really naughty in how it's using things. 8-P Since you will have the new IO layer soon I think it may be a good idea for me to just dig out another card from my pile of parts (accumulation of 15 years of pc upgrades, repairs, etc on my own, and other people's machines.) If I tried, I think I could probably make a good 7 or 8 working machines from the pile. Is that scary or what? *grin* Sounds like I'll have plenty of testing to do once the new IO layer is released. Any information on the IDE subsystems in the new IO layer? I'd love to see the same "drop in" capability for IDE drivers. Course with me knowing very little about this level of things in driver land I may be asking for the sun. Adam mentioned that the 1.2 version does IDE in a very non-linux way. I feel bad for having you spend a couple days chasing the 3com driver around now. 8-/ Is there anything that I can provide that the xen team can use? I'd like to see if there are any other ways that I can conribute with my limited amount of available time. I'll definitly be allocating some time to testing various cards and systems once the new IO layer is released. -- Brian Wolfe | Phone 1-(214)-764-1204 President, | Email brianw@xxxxxxxxxxxx TerraBox.com Inc. | pub 1024D/73C5A2DF 2003-03-18 Brian Wolfe <brianw@xxxxxxxxxxxx> Key fingerprint = 050E 5E3C CF65 4C1E A183 F48F E3E3 5B22 73C5 A2DF sub 1024g/BB87A3DD 2003-03-18 Keir Fraser said: > >> Would a decchip tulip card be a good choice for xen? Digital Equipment >> Corporation DECchip 21140 [FasterNet] (rev 22). > > Tulip is a good NIC design, and it can do full bus-mastering DMA. > > It's not as well tested on Xen as some others, but should work just > fine. For reference, the NICs that we use are Broadcom tg3, Intel > e1000, and 3com 3c905. There are suspected issues with the tg3 driver > though (the same issues exist on native Linux also - the driver just > isn't fully mature yet). > >> I also have a server class Intel ether card (not certain of the version, >> have to drop it in a system) that I can try on the server. > > Intel e100 and e1000 should work just fine and give good performance. > >> I do have a fairly large array of various low end network cards. I'll >> set >> aside some time to test what I can on the spare parts that I have. If I >> can manage more spare time I cna try to learn what needs to be done with >> the network stuff to make other cards from linux 2.4 work with Xen. > > The new IO model will be unveiled in a short while. At that point > we hope that all Linux network and block-device drivers will work with > no modifications required. Fingers crossed. :-) > > -- Keir > ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |