Re: [Xen-devel] SCSI Log for non working 3ware Controller with Xen

[Ian Pratt <Ian.Pratt@xxxxxxxxxxxx>]

> 
> As reported earlier, booting xenLinux 2.4.36 with a 3ware ATA-RAID Controller 
> (7500-4)
> does not work and runs into timeouts during the boot process and then goes 
> into
> an inifinite loop while trying to initialize the 3ware card.
> 
> I have now added an additonal normal ATA-Harddisk directly to the system.
> Then I configured the 3w-xxxx driver as a module and booted from the single 
> ATA-Harddisk.

I don't think the scsi tracing is going to be too much help as
it's a 3ware driver issue.

Doing a cat /proc/interrupts and seeing if you're getting any
for the device would be interesting.

Also, comparing the output of 'lspci -v' with a stock 2.6 kernel
might reveal something (same with  cat /proc/ioports )

Ian


-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel