Re: [Xen-devel] Xen and Adaptec (formerly DPT) SmartRAID V Controller (rev 01)

[maney@xxxxxxxxx (Martin Maney)]

On Tue, Nov 30, 2004 at 03:48:09PM +0100, Perry Couprie wrote:
> i am having problem starting a xen kernel with Adaptec Raid card,
> is it possible to use the dpt-i2o card under xen.
> I am using kernel 2.6.

If you're using the easy binary installer, perhaps it simply wasn't
built with support for that controller?  I ran into that on an old
Proliant - the panic was perfectly explained when I realized it didn't
have the 53c8xx driver built in, and a suitably adjusted build fixed it
right up.

Speaking of rebuilding xen0/xenU kernels, what's the suggested
procedure to get to the point where one can "make *config" to make
changes?  I may have overlooked it, but what I ended up doing, almost
accidentally, was interrupting the xen0 build (I must have pushed the
wrong button, but my notes are unclear at this point), then clean and
*config and after that it worked very nicely indeed.  But slowly, which
reminds me to ask if the Xen build has a toggle for using both of the
CPUs - on a single PII/450 the pair of kernels took around 50 minutes.

-- 
The phenomenon of financial excess associated with
promising novel technologies is a recurring feature
of the last two centuries.  -- Andrew Odlyzko



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel