|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-devel] Problems booting Domain 0 ES7000 x86_64
All
The best I can tell, this is what's going on when I try to bring up Dom0.
It's failing on the
BUG_ON(sidx>=eidx);
test om reserve_bootmem_core in mm/bootmem.c(line 92) {It shows up at line 93
in my code because I have added a printk}
That's happening because the size parameter in the fuction is e811ffd0, which
is a really massive number.
It's getting that number from smp_scan_config in arch/xen/i386/kernel/mpparse.c
(line 767).
//printed in smp_scan_config
End=20000000, size=e811ffd0, max_low_pfn=20000, mpf->mpf_physptr=37ee0030
//printed in reserve_bootmem_core
Addr=37ee0030, bdata->node_boot_start=0, size=e811ffd0, PAGE_SIZE=4096
sidx=229088, eidx=131072, end=131072
When I was looking at the values in smp_scan_config, I noticed that the
mpf->mpf_physptr value is 37ee0030.
Isn't this a bit high? This seems to be the cause of the problems.
So, does Xen present Dom0 with an MP table? Is this is low or high memory? Or
does Xen just point Dom0 at the system MP table?
Looking further up the serial output, I find that Xen found it's mp_table at
000f8730
(XEN) found SMP MP-table at 000f8730
I have attached the serial output at the end.
I am unsure as to how to proceed with the debugging.
Any help will be appreciated.
thanks
Raj
//Relevant serial output..
<5>Linux version 2.6.12-xen0 (root@SLES9SP2RC2-Zen) (gcc version 3.3.3 (SuSE Lin
ux)) #8 Tue Jul 26 23:23:48 EDT 2005
<6>BIOS-provided physical RAM map:
Xen: 0000000000100000 - 0000000020000000 (usable)
<5>0MB HIGHMEM available.
<5>512MB LOWMEM available.
Addr=100000, bdata->node_boot_start=0, size=5902335, PAGE_SIZE=4096
sidx=256, eidx=1697, end=1697
<7>On node 0 totalpages: 131072
<7> DMA zone: 131072 pages, LIFO batch:31
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
<6>found SMP MP-table at 3bfd4730
//printed in smp_scan_config
End=20000000, size=e811ffd0, max_low_pfn=20000, mpf->mpf_physptr=37ee0030
//printed in reserve_bootmem_core
Addr=37ee0030, bdata->node_boot_start=0, size=e811ffd0, PAGE_SIZE=4096
sidx=229088, eidx=131072, end=131072
kernel BUG at mm/bootmem.c:93 (reserve_bootmem_core)!
[<c058a6c5>] reserve_bootmem_core+0xe5/0x130
[<c058af00>] reserve_bootmem+0x20/0x30
[<c05867c4>] smp_scan_config+0xe4/0x110
[<c0450474>] _etext+0x0/0x129b8c
[<c058683e>] find_smp_config+0x4e/0x80
[<c058274a>] setup_arch+0x29a/0x590
[<c02dbed1>] printk+0x41/0x50
[<c057a743>] start_kernel+0x43/0x220
<0>Kernel panic - not syncing: BUG!
(XEN) Domain 0 shutdown: rebooting machine.
//Complete output
_ __ _____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (root@) (gcc version 3.3.3 (SuSE Linux)) Wed Jul 27 00:00
:15 EDT 2005
Latest ChangeSet: Fri Jul 22 12:44:33 2005 48aed1403fe35f80aaed8f03c354cbb8c1a0
c4ab
(XEN) WARNING: Only the first 4 GB of the physical memory map can be accessed
(XEN) by Xen in 32-bit mode. Truncating the memory map...
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009dc00 (usable)
(XEN) 000000000009dc00 - 00000000000a0000 (reserved)
(XEN) 00000000000ce000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000037ea0000 (usable)
(XEN) 0000000037ea0000 - 0000000037edf000 (ACPI data)
(XEN) 0000000037edf000 - 0000000037f00000 (ACPI NVS)
(XEN) 0000000037f00000 - 00000000e8000000 (usable)
(XEN) 00000000f8000000 - 0000000100000000 (reserved)
(XEN) System RAM: 3711MB (3800308kB)
(XEN) Xen heap: 10MB (10496kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000f8730
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f8700
(XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x06040000) @ 0x37ea2f25
(XEN) ACPI: FADT (v004 UNISYS ZORRO 0x06040000 PTL 0x00000008) @ 0x37ede152
(XEN) ACPI: OEM1 (v001 UNISYS OEM1 0x06040000 LTP 0x06040000) @ 0x37ede246
(XEN) ACPI: OEM2 (v001 UNISYS OEM2 0x06040000 LTP 0x06040000) @ 0x37ede276
(XEN) ACPI: WSPT (v001 UNISYS WSPT 0x06040000 LTP 0x06040000) @ 0x37edee72
(XEN) ACPI: SRAT (v001 UNISYS SRAT 0x06040000 LTP 0x06040000) @ 0x37edee9a
(XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x06040000) @ 0x37edeef2
(XEN) ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x37edefb0
(XEN) ACPI: DSDT (v001 Intel 870 SMP 0x06040000 MSFT 0x02000001) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: OEM1 (v001 UNISYS OEM1 0x06040000 LTP 0x06040000) @ 0x37ede246
(XEN)
(XEN) Enabling ES7000 specific features...
(XEN) Switched to APIC driver `es7000'.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x06] enabled)
(XEN) Processor #6 15:3 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x08] enabled)
(XEN) Processor #8 15:3 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0e] enabled)
(XEN) Processor #14 15:3 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[72])
(XEN) IOAPIC[1]: apic_id 10, version 32, address 0xfec04000, GSI 72-95
(XEN) ACPI: IOAPIC (id[0x0b] address[0xfec05000] gsi_base[96])
(XEN) IOAPIC[2]: apic_id 11, version 32, address 0xfec05000, GSI 96-119
(XEN) ACPI: IOAPIC (id[0x0c] address[0xfec06000] gsi_base[120])
(XEN) IOAPIC[3]: apic_id 12, version 32, address 0xfec06000, GSI 120-143
(XEN) ACPI: IOAPIC (id[0x0d] address[0xfec07000] gsi_base[144])
(XEN) IOAPIC[4]: apic_id 13, version 32, address 0xfec07000, GSI 144-167
(XEN) ACPI: IOAPIC (id[0x0e] address[0xfec08000] gsi_base[168])
(XEN) IOAPIC[5]: apic_id 14, version 32, address 0xfec08000, GSI 168-191
(XEN) ACPI: IOAPIC (id[0x0f] address[0xfec09000] gsi_base[192])
(XEN) IOAPIC[6]: apic_id 15, version 32, address 0xfec09000, GSI 192-215
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Physical Cluster. Using 7 I/O APICs, target cpus 1
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fffff000 (fee00000)
(XEN) mapped IOAPIC to ffffe000 (fec00000)
(XEN) mapped IOAPIC to ffffd000 (fec04000)
(XEN) mapped IOAPIC to ffffc000 (fec05000)
(XEN) mapped IOAPIC to ffffb000 (fec06000)
(XEN) mapped IOAPIC to ffffa000 (fec07000)
(XEN) mapped IOAPIC to ffff9000 (fec08000)
(XEN) mapped IOAPIC to ffff8000 (fec09000)
(XEN) Initializing CPU#0
(XEN) Detected 3333.588 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU0: Intel Genuine Intel(R) CPU 3.33GHz stepping 04
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 6000000
(XEN) Getting LVT0: 10700
(XEN) Getting LVT1: 10400
(XEN) masked ExtINT on CPU#0
(XEN) Leaving ESR disabled.
(XEN) Booting processor 1/8 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU1: Intel Genuine Intel(R) CPU 3.33GHz stepping 04
(XEN) Booting processor 2/14 eip 90000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU2: Intel Genuine Intel(R) CPU 3.33GHz stepping 04
(XEN) Total of 3 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 0-0, 0-16, 0-17, 0-18, 0-19, 0-20, 0-21, 0-22, 0-23,
10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12
, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-19, 10-20, 10-21, 10-22, 10-23, 1
1-0, 11-1, 11-2, 11-3, 11-4, 11-5, 11-6, 11-7, 11-8, 11-9, 11-10, 11-11, 11-12,
11-13, 11-14, 11-15, 11-16, 11-17, 11-18, 11-19, 11-20, 11-21, 11-22, 11-23, 12-
0, 12-1, 12-2, 12-3, 12-4, 12-5, 12-6, 12-7, 12-8, 12-9, 12-10, 12-11, 12-12, 12
-13, 12-14, 12-15, 12-16, 12-17, 12-18, 12-19, 12-20, 12-21, 12-22, 12-23, 13-0,
13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7, 13-8, 13-9, 13-10, 13-11, 13-12, 13-1
3, 13-14, 13-15, 13-16, 13-17, 13-18, 13-19, 13-20, 13-21, 13-22, 13-23, 14-0, 1
4-1, 14-2, 14-3, 14-4, 14-5, 14-6, 14-7, 14-8, 14-9, 14-10, 14-11, 14-12, 14-13,
14-14, 14-15, 14-16, 14-17, 14-18, 14-19, 14-20, 14-21, 14-22, 14-23, 15-0, 15-
1, 15-2, 15-3, 15-4, 15-5, 15-6, 15-7, 15-8, 15-9, 15-10, 15-11, 15-12, 15-13, 1
5-14, 15-15, 15-16, 15-17, 15-18, 15-19, 15-20, 15-21, 15-22, 15-23 not connecte
d.
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #0 registers: 24.
(XEN) number of IO-APIC #10 registers: 24.
(XEN) number of IO-APIC #11 registers: 24.
(XEN) number of IO-APIC #12 registers: 24.
(XEN) number of IO-APIC #13 registers: 24.
(XEN) number of IO-APIC #14 registers: 24.
(XEN) number of IO-APIC #15 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #0......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 006 06 0 0 0 0 0 0 0 39
(XEN) 02 006 06 0 0 0 0 0 0 0 31
(XEN) 03 006 06 0 0 0 0 0 0 0 41
(XEN) 04 006 06 0 0 0 0 0 0 0 49
(XEN) 05 006 06 0 0 0 0 0 0 0 51
(XEN) 06 006 06 0 0 0 0 0 0 0 59
(XEN) 07 006 06 0 0 0 0 0 0 0 61
(XEN) 08 006 06 0 0 0 0 0 0 0 69
(XEN) 09 006 06 1 1 0 0 0 0 0 71
(XEN) 0a 006 06 0 0 0 0 0 0 0 79
(XEN) 0b 006 06 0 0 0 0 0 0 0 81
(XEN) 0c 006 06 0 0 0 0 0 0 0 89
(XEN) 0d 006 06 0 0 0 0 0 0 0 91
(XEN) 0e 006 06 0 0 0 0 0 0 0 99
(XEN) 0f 006 06 0 0 0 0 0 0 0 A1
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #10......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #11......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #12......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #13......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #14......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #15......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ49 -> 0:2
(XEN) IRQ57 -> 0:1
(XEN) IRQ65 -> 0:3
(XEN) IRQ73 -> 0:4
(XEN) IRQ81 -> 0:5
(XEN) IRQ89 -> 0:6
(XEN) IRQ97 -> 0:7
(XEN) IRQ105 -> 0:8
(XEN) IRQ113 -> 0:9
(XEN) IRQ121 -> 0:10
(XEN) IRQ129 -> 0:11
(XEN) IRQ137 -> 0:12
(XEN) IRQ145 -> 0:13
(XEN) IRQ153 -> 0:14
(XEN) IRQ161 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3333.4991 MHz.
(XEN) ..... host bus clock speed is 166.6748 MHz.
(XEN) ..... bus_scale = 0x0000AAB1
(XEN) checking TSC synchronization across 3 CPUs:
(XEN) CPU#0 had 726674 usecs TSC skew, fixed it up.
(XEN) CPU#1 had -1651956 usecs TSC skew, fixed it up.
(XEN) CPU#2 had -1651956 usecs TSC skew, fixed it up.
(XEN) Brought up 3 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=
0xC0000000,PAE=no,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: c0000000->e0000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c06180e4
(XEN) Init. ramdisk: c0619000->c0619000
(XEN) Phys-Mach map: c0619000->c0699000
(XEN) Page tables: c0699000->c069c000
(XEN) Start info: c069c000->c069d000
(XEN) Boot stack: c069d000->c069e000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing Free RAM: ......................................done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen
).
In start Kernel
<5>Linux version 2.6.12-xen0 (root@SLES9SP2RC2-Zen) (gcc version 3.3.3 (SuSE Lin
ux)) #9 Tue Jul 26 23:59:43 EDT 2005
<6>BIOS-provided physical RAM map:
Xen: 0000000000100000 - 0000000020000000 (usable)
<5>0MB HIGHMEM available.
<5>512MB LOWMEM available.
Addr=100000, bdata->node_boot_start=0, size=5902335, PAGE_SIZE=4096
sidx=256, eidx=1697, end=1697
<7>On node 0 totalpages: 131072
<7> DMA zone: 131072 pages, LIFO batch:31
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
<6>found SMP MP-table at 3bfd4730
End=20000000, size=1000, max_low_pfn=20000, mpf->mpf_physptr=37ee0030Addr=37ee00
30, bdata->node_boot_start=0, size=4096, PAGE_SIZE=4096
sidx=229088, eidx=229090, end=229090
kernel BUG at mm/bootmem.c:94 (reserve_bootmem_core)!
[<c058a695>] reserve_bootmem_core+0xe5/0x130
[<c058aed0>] reserve_bootmem+0x20/0x30
[<c05867bc>] smp_scan_config+0xdc/0xe0
[<c0450474>] _etext+0x0/0x129b8c
[<c058680e>] find_smp_config+0x4e/0x80
[<c058274a>] setup_arch+0x29a/0x590
[<c02dbed1>] printk+0x41/0x50
[<c057a743>] start_kernel+0x43/0x220
<0>Kernel panic - not syncing: BUG!
(XEN) Domain 0 shutdown: rebooting machine.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |