|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: SMP on X86
Kamble, Nitin A <nitin.a.kamble <at> intel.com> writes: > > Peter, > Xen Hypervisor by default is configured as SMP and also recognizes > SMT. > Dom0 kernel by default is UP and it needs to be rebuilt enabling SMP, to > get multiple threads in the dom0. The steps you described looks ok to > me. > I am not very clear about your issue. Can you send this to understand > the issue better? > 1. native kernel dmesg (run with native linux kernel: dmesg) > 2. Xen console log: (run in dom0: xm dmesg) > 3. dom0 kernel dmesg (run in dom0: dmesg) > > Thanks & Regards, > Nitin During startup Xen prints the following output : \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (root@) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.25 Latest ChangeSet: Fri Oct 14 01:42:34 2005 +0100 7377:70aa62954e91 (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009b800 (usable) (XEN) 000000000009b800 - 00000000000a0000 (reserved) (XEN) 00000000000ca000 - 00000000000cc000 (reserved) (XEN) 00000000000dc000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003ff70000 (usable) (XEN) 000000003ff70000 - 000000003ff7a000 (ACPI data) (XEN) 000000003ff7a000 - 000000003ff80000 (ACPI NVS) (XEN) 000000003ff80000 - 0000000040000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff800000 - 00000000ffc00000 (reserved) (XEN) 00000000fffffc00 - 0000000100000000 (reserved) (XEN) System RAM: 1023MB (1047596kB) (XEN) Xen heap: 10MB (10656kB) (XEN) PAE disabled. (XEN) found SMP MP-table at 000f6680 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f66b0 (XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3ff75b79 (XEN) ACPI: FADT (v001 INTEL CANTWOOD 0x06040000 PTL 0x00000003) @ 0x3ff79e69 (XEN) ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x3ff79edd (XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @0x3ff79f2d (XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3ff79fa1 (XEN) ACPI: SSDT (v001 PTLTD ACPIHT 0x06040000 LTP 0x00000001) @ 0x3ff79fc9 (XEN) ACPI: DSDT (v001 INTEL CANTWOOD 0x06040000 MSFT 0x0100000b) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:4 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 15:4 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 3200.643 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 2 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 3e000000->3f000000 (124480 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04a47e0 (XEN) Init. ramdisk: c04a5000->c0ca5000 (XEN) Phys-Mach map: c0ca5000->c0d22900 (XEN) Start info: c0d23000->c0d24000 (XEN) Page tables: c0d24000->c0d29000 (XEN) Boot stack: c0d29000->c0d2a000 (XEN) TOTAL: c0000000->c1000000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x800000, start at 0xc04a5000 (XEN) Scrubbing Free RAM: ...........done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen dmesg on the running system results in : Linux version 2.6.12-xen0 (root@rothut9) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #7 SMP Mon Oct 17 17:18:32 CEST 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000001f640000 (usable) 0MB HIGHMEM available. 502MB LOWMEM available. On node 0 totalpages: 128576 DMA zone: 128576 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 found SMP MP-table at 000f6680 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f66b0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3ff75b79 ACPI: FADT (v001 INTEL CANTWOOD 0x06040000 PTL 0x00000003) @ 0x3ff79e69 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x3ff79edd ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3ff79f2d ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3ff79fa1 ACPI: SSDT (v001 PTLTD ACPIHT 0x06040000 LTP 0x00000001) @ 0x3ff79fc9 ACPI: DSDT (v001 INTEL CANTWOOD 0x06040000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information IRQ lockup detection disabled Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/mem ro console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Xen reported: 3200.642 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Software IO TLB disabled vmalloc area: e0000000-fb7fe000, maxmem 34000000 Memory: 496384k/514304k available (2301k kernel code, 17696k reserved, 862k data, 324k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6396.31 BogoMIPS (lpj=31981568) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080 0000441d 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 Booting processor 1/1 eip c0100008 boot error: -22 CPU #1 not responding - cannot use it. Total of 1 processors activated (6396.31 BogoMIPS). ENABLING IO-APIC IRQs Brought up 1 CPUs CPU0 attaching sched-domain: domain 0: span 01 groups: 01 domain 1: span 01 groups: 01 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 8192k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:05.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CSA_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *7 ACPI: PCI Interrupt Link [LNKD] (IRQs *3 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15) xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Grant table initialized Number of CPUs sharing cache didn't match any known set of CPUs Number of CPUs sharing cache didn't match any known set of CPUs IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> Simple Boot Flag at 0x38 set to 0x1 Initializing Cryptographic API serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.6) pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> Xen virtual console successfully installed as ttyS0 Event-channel device installed. xen_net: Initialising Xen netif backend. mice: PS/2 mouse device common for all mice md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1330.800 MB/sec raid5: using function: pIII_sse (1330.800 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 input: AT Translated Set 2 keyboard on isa0060/serio0 Bridge firewalling registered md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 8192KiB [1 disk] into ram disk... | Finally an smp kernel produces th following output : Linux version 2.6.13-8-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prere5 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) BIOS-e820: 000000003ff70000 - 000000003ff7a000 (ACPI data) BIOS-e820: 000000003ff7a000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6680 DMI present. Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/mem ro console=ttyS0,9600,8n1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3201.279 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1030616k/1048000k available (2330k kernel code, 16404k reserved, 753k d) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6408.59 BogoMIPS (lpj=12817195) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2531k freed ACPI: Looking for DSDT in initrd... not found! not found! CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6401.57 BogoMIPS (lpj=12803140) monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 Total of 2 processors activated (12810.16 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd920, last bus=4 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *7 ACPI: PCI Interrupt Link [LNKD] (IRQs *3 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:03.0 IO window: 2000-2fff MEM window: f8100000-f81fffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: f8200000-f82fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: f8300000-f9ffffff PREFETCH window: 40100000-401fffff TC classifier action (bugs to netdev@xxxxxxxxxxxxxxx cc hadi@xxxxxxxxxx) Simple Boot Flag at 0x38 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1129725488.816:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) input: AT Translated Set 2 keyboard on isa0060/serio0 TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Starting balanced_irq Using IPI No-Shortcut mode ACPI wakeup devices: CSA PCIX PCIB KBC0 MSE0 COM1 AC97 USB1 USB2 EUSB ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usbcore: registered new driver usbfs usbcore: registered new driver hub SCSI subsystem initialized ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio hda: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 26 (level, low) -> IRQ 177 ata1: SATA max UDMA/133 cmd 0xF8806200 ctl 0xF8806238 bmdma 0x0 irq 177 ata2: SATA max UDMA/133 cmd 0xF8806280 ctl 0xF88062B8 bmdma 0x0 irq 177 ata3: SATA max UDMA/133 cmd 0xF8806300 ctl 0xF8806338 bmdma 0x0 irq 177 ata4: SATA max UDMA/133 cmd 0xF8806380 ctl 0xF88063B8 bmdma 0x0 irq 177 ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise ata3: no device found (phy stat 00000000) scsi2 : sata_promise ata4: no device found (phy stat 00000000) scsi3 : sata_promise Vendor: ATA Model: ST3160023AS Rev: 3.00 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 < sda5 sda6 sda7 sda8 sda9 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Vendor: ATA Model: ST3160023AS Rev: 3.00 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3-fs warning: maximal mount count reached, running e2fsck is recommended My impression is, that XEN recognizes the HT-CPU as two cpus, while the kernel fails to bring up the second. Peter Bier _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |