RE: [Xen-devel] x86_64 eth0 e1000_clean_tx_irq tx hang

["Kamble, Nitin A" <nitin.a.kamble@xxxxxxxxx>]

>  - limiting to 2G works fine, sounds like something with swiotlb

I noticed it too and exactly same. I also notice this in the dom0 dmesg.

PCI-DMA: Disabling IOMMU.
WARNING more than 4GB of memory but IOMMU not compiled in.
WARNING 32bit PCI may malfunction.
You might want to enable CONFIG_GART_IOMMU
Memory: 5868412k/6071120k available (3553k kernel code, 202040k
reserved, 1376k
data, 300k init)

Thanks & Regards,
Nitin
------------------------------------------------------------------------
-----------
Open Source Technology Center, Intel Corp

>-----Original Message-----
>From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-
>bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Chris Wright
>Sent: Wednesday, February 08, 2006 5:28 PM
>To: Ian Pratt
>Cc: Chris Wright; xen-devel@xxxxxxxxxxxxxxxxxxx; adam@xxxxxxxxxxx
>Subject: Re: [Xen-devel] x86_64 eth0 e1000_clean_tx_irq tx hang
>
>* Ian Pratt (m+Ian.Pratt@xxxxxxxxxxxx) wrote:
>> For us, the bug is hard to repro, despite us having tried on several
>> different machines (2 and 4 way SMP, Opteron and Xeon, tg3 and e1000
>> NICs).
>
>xeon, 4 cpu (2-ht), e1000, 4G
>
>- works fine w/ 32-bit
>- dom0 is UP (SMP fails as well)
>  - this is dom0 only, no xend, no domUs, no bridging
>  - limiting to 2G works fine, sounds like something with swiotlb
>
>Also, while it was working, I blasted with packets, and eventually got:
>
>irq 19: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace: <IRQ> <ffffffff80148508>{__report_bad_irq+56}
>       <ffffffff80148721>{note_interrupt+449}
><ffffffff80147dcc>{handle_IRQ_event+76}
>       <ffffffff80147ec2>{__do_IRQ+162} <ffffffff8011077b>{do_IRQ+75}
>       <ffffffff802f16b5>{evtchn_do_upcall+117}
><ffffffff8010e5f1>{do_hypervisor_callback+37}
>       <ffffffff8011ccc5>{ia32_syscall+13}
><ffffffff8010a22a>{hypercall_page+554}
>       <ffffffff8010a22a>{hypercall_page+554}
><ffffffff802f14de>{force_evtchn_callback+14}
>       <ffffffff80147db5>{handle_IRQ_event+53}
><ffffffff80147ea8>{__do_IRQ+136}
>       <ffffffff8011077b>{do_IRQ+75}
><ffffffff802f16b5>{evtchn_do_upcall+117}
>       <ffffffff8010e5f1>{do_hypervisor_callback+37} <EOI>
>       <ffffffff8011ccc5>{ia32_syscall+13}
>handlers:
>[<ffffffff80377b80>] (ata_interrupt+0x0/0x1b0)
>[<ffffffff80396570>] (usb_hcd_irq+0x0/0x70)
>Disabling IRQ #19
>
>thanks,
>-chris
>
>_______________________________________________
>Xen-devel mailing list
>Xen-devel@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel