Re: [Xen-devel] [PATCH][XM-TEST] Fix bugzilla # 674 by changing the xm-test Console.py to wait for the command prompt.

[David F Barrera <dfbp@xxxxxxxxxx>]

Harry,

I tested your patch. I would like you to look at the logs as there are 
lots of failures. Please contact me and I will tell you where to get the 
logs (I tried sending them, but the file is probably too big).


Harry Butterworth wrote:
> Lots of xm-test tests are failing with console timeouts on some machines
> at the moment.  I reproduced the problem and found it was due to some
> probing activity in the boot process of the -xen kernel.  The behaviour
> of the current xm-test code is to assume that the boot process has
> finished after performing three one-second waits for input---when the
> probing activity introduces more than three one-second delays the test
> suite breaks.
>
> The patch below changes the test suite to wait for the command prompt
> before attempting to submit a command.  The timeout is increased from 3
> seconds to 3 minutes but the wait exits early when the prompt is found
> so the test suite doesn't take any longer to run.
>
> DO NOT APPLY.  This patch is FOR REVIEW ONLY at this stage since my
> python skills are pretty lame and it really needs to get some testing
> from people who have actually been experiencing problems.  For me,
> xm-test works the same on my machine with and without this patch.
>
> Signed-off-by Harry Butterworth <butterwo@xxxxxxxxxx>
>   
> ------------------------------------------------------------------------
> diff -r ee3d10828937 -r 2dcc3cc7118e tools/xm-test/lib/XmTestLib/Console.py
> --- a/tools/xm-test/lib/XmTestLib/Console.py    Fri Jun 16 13:43:54 2006
> +++ b/tools/xm-test/lib/XmTestLib/Console.py    Fri Jun 16 18:28:52 2006
> @@ -82,9 +82,6 @@
>  
>          tty.setraw(self.consoleFd, termios.TCSANOW)
>  
> -        self.__chewall(self.consoleFd)
> -
> -
>      def __addToHistory(self, line):
>          self.historyBuffer.append(line)
>          self.historyLines += 1
> @@ -120,34 +117,47 @@
>          output"""
>          self.PROMPT = prompt
>  
> -
> -    def __chewall(self, fd):
> +    def __getprompt(self, fd):
>          timeout = 0
> -        bytes   = 0
> -        
> -        while timeout < 3:
> -            i, o, e = select.select([fd], [], [], 1)
> -            if fd in i:
> -                try:
> -                    foo = os.read(fd, 1)
> -                    if self.debugMe:
> -                        sys.stdout.write(foo)
> -                    bytes += 1
> -                except Exception, exn:
> -                    raise ConsoleError(str(exn))
> -
> -            else:
> -                timeout += 1
> -
> -            if self.limit and bytes >= self.limit:
> +        bytes = 0
> +        while timeout < 180:
> +            # eat anything while total bytes less than limit else raise RUNAWAY
> +            while (not self.limit) or (bytes < self.limit):
> +                i, o, e = select.select([fd], [], [], 1)
> +                if fd in i:
> +                    try:
> +                        foo = os.read(fd, 1)
> +                        if self.debugMe:
> +                            sys.stdout.write(foo)
> +                        bytes += 1
> +                    except Exception, exn:
> +                        raise ConsoleError(str(exn))
> +                else:
> +                    break
> +            else:
>                  raise ConsoleError("Console run-away (exceeded %i bytes)"
>                                     % self.limit, RUNAWAY)
> -
> -        if self.debugMe:
> -            print "Ignored %i bytes of miscellaneous console output" % bytes
> -        
> -        return bytes
> -
> +            # press enter
> +            os.write(self.consoleFd, "\n")
> +            # look for prompt
> +            for prompt_char in "\r\n" + self.PROMPT:
> +                i, o, e = select.select([fd], [], [], 1)
> +                if fd in i:
> +                    try:
> +                        foo = os.read(fd, 1)
> +                        if self.debugMe:
> +                            sys.stdout.write(foo)
> +                        if foo != prompt_char:
> +                            break
> +                    except Exception, exn:
> +                        raise ConsoleError(str(exn))
> +                else:
> +                    timeout += 1
> +                    break
> +            else:
> +                break
> +        else:
> +            raise ConsoleError("Timed out waiting for console prompt")
>  
>      def __runCmd(self, command, saveHistory=True):
>          output = ""
> @@ -155,7 +165,7 @@
>          lines  = 0
>          bytes  = 0
>  
> -        self.__chewall(self.consoleFd)
> +        self.__getprompt(self.consoleFd)
>  
>          if verbose:
>              print "[%s] Sending `%s'" % (self.domain, command)
> @@ -176,7 +186,7 @@
>                          "Failed to read from console (fd=%i): %s" %
>                          (self.consoleFd, exn))
>              else:
> -                raise ConsoleError("Timed out waiting for console")
> +                raise ConsoleError("Timed out waiting for console command")
>  
>              if self.limit and bytes >= self.limit:
>                  raise ConsoleError("Console run-away (exceeded %i bytes)"
>   
> ------------------------------------------------------------------------
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>   

--

Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
        
                         Euripides



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel