|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Sometimes HVM winxp with gpl PV drivers 0.8.1 drivers boots forever
Hi, I'm using gpl PV drivers 0.8.1 drivers for HVM winxp and sometimes it boots forever. From the iostat in dom0 with xen-3.1.2 is see that there is NO access to
the underlying lvm volume of this winxp HVM.
From strace i see that qemu-dm indefinetly loops with:
read(14, "\34\0\0\0", 4) = 4
write(14, "\34\0\0\0", 4) = 4
clock_gettime(CLOCK_MONOTONIC, {53840, 172326473}) = 0
ioctl(14, EVIOCGKEYCODE, 0x7fff012f0fc0) = 0
clock_gettime(CLOCK_MONOTONIC, {53840, 172398473}) = 0
clock_gettime(CLOCK_MONOTONIC, {53840, 172436473}) = 0
clock_gettime(CLOCK_MONOTONIC, {53840, 172474473}) = 0
select(18, [7 10 12 14 17], [], [], {0, 10000}) = 1 (in [14], left {0, 10000})
and
lsof -p 6602 | awk '$4 ~ /(7|10|12|14|17)/'
qemu-dm 6602 root 7u CHR 10,200 1853
/dev/net/tun
qemu-dm 6602 root 10u CHR 5,2 2035
/dev/ptmx
qemu-dm 6602 root 12r FIFO 0,5 14646
pipe
qemu-dm 6602 root 14u CHR 10,63 1819
/dev/xen/evtchn
qemu-dm 6602 root 17u IPv4 19833 TCP
clustrix20.cs.bgu.ac.il:5911->lesbinux.cs.bgu.ac.il:51837 (ESTABLISHED)
and qemu-dm takes about 10% of cpu
while others HVM qemu-dm, which boot ok, loop indefinetly with:
select(14, [6 8 9 11 13], [], [], {0, 10000}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {54627, 313284473}) = 0
clock_gettime(CLOCK_MONOTONIC, {54627, 313366473}) = 0
clock_gettime(CLOCK_MONOTONIC, {54627, 313450473}) = 0
clock_gettime(CLOCK_MONOTONIC, {54627, 313558473}) = 0
if i reboot this HVM it boots ok , and may boot ok next few times untill
it gets stuck the same way on some reboot/start
I'm not 100% sure it never happens without the gpl PV rivers. Any ideas? Alex _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |