RE: [Xen-devel] Fatal page fault on xen-unstable tip (vt-d related maybe?)

["Yang, Xiaowei" <xiaowei.yang@xxxxxxxxx>]

Some info got from you log:
Strange to see there is VTd write fault from ïa high address f1bffb000.
It's not covered by e820. Could it be in one MMIO range?

I can't figure out why a page fault from ï7b9c51e0 (not in Xen HV),
while on the top of the stack is ïiommu_enable_translation(). It seems
output of print_vtd_entries() is not finished. And as we met Page fault
when executing it before, could it be the cause??

P.S. you log is really messed up. To make life easier, ïsync_console Xen
option is recommended:)


Thanks,
Xiaowei


> -----Original Message-----
> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx]On Behalf Of Dan
> Magenheimer
> Sent: Wednesday, June 11, 2008 3:26 PM
> To: Xen-Devel (E-mail)
> Subject: [Xen-devel] Fatal page fault on xen-unstable tip
> (vt-d related
> maybe?)
>
>
> I just updated to a more recent unstable (17826) and got this
> fatal page fault on boot.  I backed off to 17772 (which I'm told
> was good on another machine) and got the same.  I suspect it
> is something peculiar to my hardware -- an Intel "Weybridge"
> box -- which I think has VT-d support though I am not currently
> using it.
>
> I can't binary search the exact cset right now, but thought
> I'd report it.
>
> Dan
>
> =============
>
>
>  \ \/ /___ _ __   |___ / |___ /    _   _ _ __  ___| |_ __ _|
> |__ | | ___
>
>   \  // _ \ '_ \    |_ \   |_ \ __| | | | '_ \/ __| __/ _` |
> '_ \| |/ _ \
>
>   /  \  __/ | | |  ___) | ___) |__| |_| | | | \__ \ || (_| |
> |_) | |  __/
>
>  /_/\_\___|_| |_| |____(_)____/    \__,_|_|
> |_|___/\__\__,_|_.__/|_|\___|
>
>
> (XEN) Xen version 3.3-unstable (root@(none)) (gcc version
> 4.1.1 20070105 (Red Ha
>
> t 4.1.1-52)) Wed Jun 11 14:02:26 MDT 2008
>
> (XEN) Latest ChangeSet: Mon Jun 02 16:05:07 2008 +0100
> 17772:fe60bf79d96f
>
> (XEN) Command line: com1=115200,8n1 console=com1,vga noreboot
>
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
>
> (XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
>
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
>
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009cc00 (usable)
>
> (XEN)  000000000009cc00 - 00000000000a0000 (reserved)
>
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
>
> (XEN)  0000000000100000 - 000000007d5b0000 (usable)
>
> (XEN)  000000007d5b0000 - 000000007d5be000 (ACPI data)
>
> (XEN)  000000007d5be000 - 000000
> (XEN)  000000007d5f0000 - 000000007d600000
> (reserved)nput/input2smp_apic_timer_i
> (XEN)  00000000fed90000 - 00000000fed94000 (reserved)
> Sta
> pnp:
> ACPI: LAPIC (acpi_id[0x04] lapic_id[
> (XEN)  00000000fee00000 - 00000000fee01000 (reserved) ]
>
> (XEN)  00000000ffa6f000 - 00000000ffa70000 (reserved)
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_b
> (XEN)  00000000ffb00000 - 0000000100000000 (reserved)
> echo
> Q
> usbcore: registered new driver h
> (XEN) System RAM: 2005MB (2053424kB)
> IOAPIC[0]: a
> (XEN) Xen heap: 9MB (10012kB)0xfec00000, GSI 0-23
> (XEN) Domain heap initialised: DMA width 32 bits
> uhci_hcd 0000:00:1
> PCI: I
> (XEN) Processor #0 6:15 APIC version 20
>
> ACPI:
> (XEN) Processor #1 6:15 APIC version 202 dfl dfl)] on
> usb-0000:00:1PU:
> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xf
>
> (XEN) Brought up 2 CPUs00 (virtual 0xf8800000)
> (XEN) [VT-D]iommu.c:1700: Queued Invalidation hardware not
> found
> (XEN) [VT-D]iommu.c:1700: Queued Invalidation hardware not
> found
> hpet0: 4 64-bit timers, 14318180 Hzs SCSI revision: 05tr
> (XEN) [VT-D]iommu.c:1700: Queued Invalidation hardware not
> foundly
>
> Using HPET for base-timercated, 0from 1 choice
> (XEN) [VT-D]iommu.c:1700: Queued Invalidation hardware not
> foundg timer specific routine.. 5990.25 BogoMIPS (lpj=2995129)cache h
> (XEN) [VT-D]iommu.c:1708: Interrupt Remapping hardware not
> founding
> (XEN) [VT-D]iommu.c:1708: Interrupt Remapping hardware not
> found
> usb
> Security Framework v1.0.0 in
> (XEN) [VT-D]iommu.c:1708: Interrupt Remapping hardware not
> found
> SELinux:
> (XEN) [VT-D]iommu.c:1708: Interrupt R
>
> 20060707]-0:1.0: 2
> ACPI:
> Intel mac
> (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 0:2.0 addr
> f1bffb000 REASON 5 io
>
> ACPI (excon
>
> mmu->reg = fff77000reporting enabled o
> (XEN) print_vtd_entries: iommu = ff1e7c00 bdf = 0:2:0 gmfn =
> f1bffb
>
> (XEN)     root_entry = fee17000uction... OK.1 choicetm2 cx16 x
> (XEN)     root_entry[0] = 7c400001
> 20060707]
> (XEN)     context = fee54000hing to UP code C2[C2])CI Ho
> (XEN)     context[10] = 101_7c9c5001
>
> (XEN) EFLAGS: 00010286   CONTEXT: hypervisor
> ENABLING IO-APIC IRQsx3f8 (irq = 4) i
> (XEN) eax: 00000000   ebx: 7b9c51e0   ecx: 0000000a   edx:
> 00000000 apic1=0 pin1=2 apic2=-1 pin2=-100:07: ttyS1 at I/O
> 0x2f8 (irq = 3)
> (XEN) esi: 00000003   edi: 0000003c   ebp: fee54000   esp:
> ff1efce0
> checking TSC
> (XEN) cr0: 8005003b   cr4: 000026f0   cr3: 00100120   cr2:
> 7b9c51e0GSI 17 (level, low) -
>
> (XEN) ds: e010   es: e010   fs: e010   gs: e010   ss: e010
> cs: e008CPUss: mounted filesy
> migration_cos
> (XEN)    fee54000 00000001 156db6e3 ff1e7c00 00000005
> 00f1bffb 00000000 ff12160b
> ACPI: bus type pci registeredE driver Revis
>
> (XEN)    ff1e7c00 00000000 00000010 00f1bffb 00000000
> 00000002 00000000 1bffb000S Bug: MCFG area at e0000000 is not
> E820-reservedde: Assuming 33MHz system bus s
>
> (XEN)    0000000f 00000005 fff77000 ff12363a ff23af00
> 00000001 00000010 ff1e7c00
>
> PCI: Not using MMCONF
>
> (XEN)    00000000 80000005 00000001 00000000 00000010
> 00000200 0000
>
>
> (XEN)    ff1efde4 510cb033 00000000 fff77000 00000000
> ff1e7c00 00000282 00000000
> ACPI: PCI Root Bridge [PCI0] (0000:
>
> (XEN)    00a00000 ff120f38 0000e008 00000282 ff1e7c00
> ff198892 00000298 fff77000evice co
> PCI: Transparent bridge - 0000:00:1e.0
>
> (XEN)    00000000 00000000 10000000 ff23bb80 000000e0
> 00000008 00000100 ff123b62
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)orts dete
>
> (XEN)    80ffff00 00000000 00000004 00000000 ffbec718
> ff19ab83 00000000 ff1e4bb4
> md: bitmap version 4.39 jbd.ko mod
>
>
> (XEN)    00000001 00000003 00000000 ff10437c ff1e4080
> 00000000 00000000 ff16b9e7
> Loading libata.ko mod
>
>
>
>
>
>
>
> (XEN)    00000003 ff19acd4 00000000 ff1ca144 00000000
> 00000001 00000510 ff1c0ac8
> NetLabel: Initializingbus registered, assign
>
>
> (XEN)    00000000 00000000 00000000 00000000 00000000
> 00000000 fffffffb ff1b3070
>
> NetLabel:  pro
>
> (XEN)    ff1cb1f0 ff1b2670 00021a00 00000000 00000000
> 00000000 ff02cc80 ff021a00
>
>
>
> (XEN)    [<ff120f38>] iommu_enable_translation+0xa8/0xc0
> (XEN)    [<ff123b62>] intel_iommu_domain_init+0x202/0x290
> (XEN)    [<ff12bedf>] arch_domain_create+0x1af/0x2a


> (XEN)    [<ff105357>] evtchn_init+0x27/0x40
> (XEN)    [<ff10437c>] domain_create+0x11c/0x250
> (XEN)    [<ff16b9e7>] __hvm_register_PIC_save_and_restore+0x37/0x40
> (XEN)    [<ff1c0ac8>] __start_xen+0xcd8/0x1380
> (XEN)    [<ff1b3070>] e820nr+0x0/0x4
> (XEN)    [<ff1b2670>] e820map+0x0/0xa00
> (XEN)    [<ff10006c>] __high_start+0x58/0x5a
> (XEN)
> (XEN) Pagetable walk from 7b9c51e0:
> (XEN)  L3[0x001] = 00000000001f5001 55555555
> (XEN)  L2[0x1dc] = 0000000000000000 ffffffff
> (XEN)
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) FATAL PAGE FAULT
> (XEN) [error_code=0000]
> (XEN) Faulting linear address: 7b9c51e0
> (XEN) ****************************************
> (XEN)
> (XEN) Manual reset required ('noreboot' specified)
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel