[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] RFC: Xen VMDq patch for ixgbe



 
Mitch,

It seems this last patch is not working properly
I get a kernel panic when the driver module loads (see panic message below).
Apparently the driver is trying to allocate guest memory (vmq_alloc_skb()) 
before the queue is allocated to a guest (there is no guest running when the 
ixgbe module is loaded). This is probably something easy to fix

I am able to use the previous version of the patch (version 1.3.31.3 attached) 
with no problem. Not sure what changed from version 1.3.31.3 to this new 
version 1.3.47. I am also attaching the buggy patch for  version 1.3.47 that I 
am using  so you can verify if I am using the right patch ...

Could you please take a look at this?

Thanks

Renato

=====================================

Unable to handle kernel paging request at 0000000000007800 RIP: 
 [<ffffffff804600a4>] vmq_alloc_skb+0x64/0x1f0
PGD 79807067 PUD 79710067 PMD 0 
Oops: 0000 [1] SMP 
CPU 0 
Modules linked in: video thermal fan button battery asus_acpi ac ixgbe
Pid: 0, comm: swapper Not tainted 2.6.18.8-xen0 #73
RIP: e030:[<ffffffff804600a4>]  [<ffffffff804600a4>] vmq_alloc_skb+0x64/0x1f0
RSP: e02b:ffffffff80793ca0  EFLAGS: 00010206
RAX: ffff88007acc5dd8 RBX: 0000000000000000 RCX: 0000000000080000
RDX: ffff88007b5d7740 RSI: 0000000000000001 RDI: ffff88007a450000
RBP: ffffffff80793cd0 R08: 0000000000000001 R09: ffff88007a450c80
R10: 000000000000003f R11: 000000000000012c R12: 0000000000007800
R13: 0000000000000000 R14: 0000000000000500 R15: 00000000000005f4
FS:  00002ba4a6b1eda0(0000) GS:ffffffff80737000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000
Process swapper (pid: 0, threadinfo ffffffff8074c000, task ffffffff8064d440)
Stack:  ffff88007a450000 ffffc200118f0000 0000000000000000 0000000000000000
 ffff88007b279070 ffff88007a450500 ffffffff80793d30 ffffffff88000d2f
 000003ff80793d50 ffff880075df0000 ffff88007a450000 ffff88007fe90800
Call Trace:
 <IRQ> [<ffffffff88000d2f>] :ixgbe:ixgbe_alloc_rx_buffers+0x15f/0x2e0
 [<ffffffff8800320b>] :ixgbe:ixgbe_clean_rx_irq+0x9eb/0xaa0
 [<ffffffff8800798e>] :ixgbe:ixgbe_clean_rxonly_many+0xbe/0x210
 [<ffffffff8800de3e>] :ixgbe:__kc_adapter_clean+0x2e/0x50
 [<ffffffff8052eba4>] net_rx_action+0xc4/0x1c0
 [<ffffffff80239eec>] __do_softirq+0x9c/0x140
 [<ffffffff8020b604>] call_softirq+0x1c/0x28
 [<ffffffff8020d7cc>] do_softirq+0x6c/0x100
 [<ffffffff80239d48>] irq_exit+0x48/0x50
 [<ffffffff80430b92>] evtchn_do_upcall+0x232/0x250
 [<ffffffff8020b13a>] do_hypervisor_callback+0x1e/0x2c
 <EOI> [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
 [<ffffffff802063aa>] hypercall_page+0x3aa/0x1000
 [<ffffffff8020eed2>] raw_safe_halt+0xc2/0xf0
 [<ffffffff80209b15>] xen_idle+0x75/0x90
 [<ffffffff8020926a>] cpu_idle+0xba/0xe0
 [<ffffffff802073b6>] rest_init+0x26/0x30
 [<ffffffff807568f5>] start_kernel+0x265/0x270
 [<ffffffff8075623d>] _sinittext+0x23d/0x250


Code: 4d 39 a6 00 73 00 00 4d 8d ae e8 72 00 00 0f 84 58 01 00 00 
RIP  [<ffffffff804600a4>] vmq_alloc_skb+0x64/0x1f0
 RSP <ffffffff80793ca0>
CR2: 0000000000007800
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
 (XEN) Domain 0 crashed: 'noreboot' set - not rebooting.


> -----Original Message-----
> From: Williams, Mitch A [mailto:mitch.a.williams@xxxxxxxxx] 
> Sent: Friday, January 16, 2009 3:57 PM
> To: Williams, Mitch A; xen-devel@xxxxxxxxxxxxxxxxxxx
> Cc: steven.smith@xxxxxxxxxxxxx; Ronciak, John; Santos, Jose Renato G
> Subject: RE: [Xen-devel] RFC: Xen VMDq patch for ixgbe
> 
> Whoops!  Attached the wrong patch file.  Please use this one.
> 
> Sorry for the confusion.
> -Mitch 
> 
> >-----Original Message-----
> >From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> >[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Mitch 
> >Williams
> >Sent: Friday, January 16, 2009 3:06 PM
> >To: xen-devel@xxxxxxxxxxxxxxxxxxx
> >Cc: steven.smith@xxxxxxxxxxxxx; Ronciak, John; 
> joserenato.santos@xxxxxx
> >Subject: [Xen-devel] RFC: Xen VMDq patch for ixgbe
> >
> >Attached is a patch to enable Xen VMDq (AKA Netchannel2 vmq) for the 
> >ixgbe driver.  This is intended for testing and development purposes 
> >and should not be considered to be production-quality code.
> >
> >Please note that this does NOT apply to the Xen Linux kernel; it 
> >applies to the ixgbe 1.3.47 release, available from 
> >http://sourceforge.net/projects/e1000/.  You'll obviously 
> also need an 
> >Intel 82598-based 10 Gigabit network card and some sort of link 
> >partner.  This will build against the current Netchannel2 source 
> >available from http:xenbits.xen.org/ext/netchannel2.  You'll need to 
> >enable "Net channel 2 support for multi-queue devices" in 
> your kernel 
> >config.
> >
> >To enable VMDq functionality, load the driver with the command-line 
> >parameter VMDQ=<num queues>, as in:
> >
> >$ insmod ~/ixgbe-1.3.47/src/ixgbe.ko VMDQ=8
> >
> >You can then set up PV domains to use the device by 
> modifying your VM 
> >configuration file from
> >     vif = [ '<whatever>' ]
> >to
> >     vif2 = [ 'pdev=<netdev>' ]
> >where <netdev> is the interface name for your 82598 board, 
> e.g peth0 in 
> >dom0.
> >
> >Known issues (at least, known by me):
> >1) Must manually attach bridge device after starting domU vm.
> >Netchannel2 backend devices show up as ethNN, not vifN.M, so the 
> >scripts don't automatically attach the interface.  Once your 
> VM starts, 
> >do ifconfig -a to see which new interface got added.  Then 
> use "brctl 
> >addif" to add this new interface the the bridge.
> >2) No broadcast replication.  This is a big one.  Incoming 
> broadcasts 
> >will ONLY go to dom0.  This means that your VMs can send ARP 
> requests 
> >and initiate IP sessions to outside machines, but outside machines 
> >cannot initiate connections because the ARP requests don't go to the 
> >domU VMs.
> >3) No loopback.  VMs cannot communicate with other VMs (including
> >dom0) on the same machine.
> >
> >Once I get this out, I'll start working on a proper backport of the 
> >driver into the Xen kernel (2.6.18.8) tree.  I'll remove as 
> much of the 
> >compatibility cruft as is prudent and properly integrate it into
> >the Kbuild stuff.   When that's done, I'll send a complete 
> patchset to
> >this list, including signed-off-by lines which can then be 
> checked in 
> >to Mercurial.
> >
> >Please review and comment, and if possible test.
> >
> >Thanks,
> >Mitch
> >

Attachment: ixgbe-1.3.31.3-xen-vmq.diff
Description: ixgbe-1.3.31.3-xen-vmq.diff

Attachment: ixgbe-1.3.47-xen-vmq.diff
Description: ixgbe-1.3.47-xen-vmq.diff

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.