[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [Xen-devel] linux: try harder to balloon up under memory pressure.



Ian, sorry if this question is stupid, but might this patch be the remedy
for an observation that I made:

  pv DomU with need for swiotlb memory (kernel option swiotlb=32,force) is
  not starting with an error "not being able to allocate enough memory", 
  especially during startup phase where some 7 DomUs are starting, but will
  succeed to do so if you wait some minutes

To my current knowledge, swiotlb memory is just memory, although there are
some further "reuirements", but I assume it's handled the same way.

BR,
Carsten.

----- Originalnachricht -----
Von: Ian Campbell <Ian.Campbell@xxxxxxxxxxxxx>
Gesendet: Fre, 5.6.2009 12:57
An: xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxx>
Cc: Keir Fraser <Keir.Fraser@xxxxxxxxxxxxx>
Betreff: [Xen-devel] linux: try harder to balloon up under memory pressure.

Currently if the balloon driver is unable to increase the guest's
reservation it assumes the failure was due to reaching its full
allocation, gives up on the ballooning operation and records the limit
it reached as the "hard limit". The driver will not try again until
the target is set again (even to the same value).

However it is possible that ballooning has in fact failed due to
memory pressure in the host and therefore it is desirable to keep
attempting to reach the target in case memory becomes available. The
most likely scenario is that some guests are ballooning down while
others are ballooning up and therefore there is temporary memory
pressure while things stabilise. You would not expect a well behaved
toolstack to ask a domain to balloon to more than its allocation nor
would you expect it to deliberately over-commit memory by setting
balloon targets which exceed the total host memory.

This patch drops the concept of a hard limit and causes the balloon
driver to retry increasing the reservation on a timer in the same
manner as when decreasing the reservation.

Also if we partially succeed in increasing the reservation
(i.e. receive less pages than we asked for) then we may as well keep
those pages rather than returning them to Xen.

This patch is for the 2.6.18-xen tree.

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>

diff -r fd9c565657b8 drivers/xen/balloon/balloon.c
--- a/drivers/xen/balloon/balloon.c    Thu Jun 04 16:26:49 2009 +0100
+++ b/drivers/xen/balloon/balloon.c    Fri Jun 05 11:56:22 2009 +0100
@@ -188,7 +188,7 @@
 
 static unsigned long current_target(void)
 {
-    unsigned long target = min(bs.target_pages, bs.hard_limit);
+    unsigned long target = bs.target_pages;
     if (target > (bs.current_pages + bs.balloon_low + bs.balloon_high))
         target = bs.current_pages + bs.balloon_low + bs.balloon_high;
     return target;
@@ -255,26 +255,12 @@
     }
 
     set_xen_guest_handle(reservation.extent_start, frame_list);
-    reservation.nr_extents   = nr_pages;
-    rc = HYPERVISOR_memory_op(
-        XENMEM_populate_physmap, &reservation);
-    if (rc < nr_pages) {
-        if (rc > 0) {
-            int ret;
+    reservation.nr_extents = nr_pages;
+    rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
+    if (rc < 0)
+        goto out;
 
-            /* We hit the Xen hard limit: reprobe. */
-            reservation.nr_extents = rc;
-            ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
-                    &reservation);
-            BUG_ON(ret != rc);
-        }
-        if (rc >= 0)
-            bs.hard_limit = (bs.current_pages + rc -
-                     bs.driver_pages);
-        goto out;
-    }
-
-    for (i = 0; i < nr_pages; i++) {
+    for (i = 0; i < rc; i++) {
         page = balloon_retrieve();
         BUG_ON(page == NULL);
 
@@ -302,13 +288,13 @@
         balloon_free_page(page);
     }
 
-    bs.current_pages += nr_pages;
+    bs.current_pages += rc;
     totalram_pages = bs.current_pages;
 
  out:
     balloon_unlock(flags);
 
-    return 0;
+    return rc < 0 ? rc : rc != nr_pages;
 }
 
 static int decrease_reservation(unsigned long nr_pages)
@@ -420,7 +406,6 @@
 void balloon_set_new_target(unsigned long target)
 {
     /* No need for lock. Not read-modify-write updates. */
-    bs.hard_limit   = ~0UL;
     bs.target_pages = max(target, minimum_target());
     schedule_work(&balloon_worker);
 }
@@ -498,17 +483,11 @@
         "Requested target:   %8lu kB\n"
         "Low-mem balloon:    %8lu kB\n"
         "High-mem balloon:   %8lu kB\n"
-        "Driver pages:       %8lu kB\n"
-        "Xen hard limit:     ",
+        "Driver pages:       %8lu kB\n",
         PAGES2KB(bs.current_pages), PAGES2KB(bs.target_pages), 
         PAGES2KB(bs.balloon_low), PAGES2KB(bs.balloon_high),
         PAGES2KB(bs.driver_pages));
 
-    if (bs.hard_limit != ~0UL)
-        len += sprintf(page + len, "%8lu kB\n",
-                   PAGES2KB(bs.hard_limit));
-    else
-        len += sprintf(page + len, "     ??? kB\n");
 
     *eof = 1;
     return len;
@@ -539,7 +518,6 @@
     bs.balloon_low   = 0;
     bs.balloon_high  = 0;
     bs.driver_pages  = 0UL;
-    bs.hard_limit    = ~0UL;
 
     init_timer(&balloon_timer);
     balloon_timer.data = 0;
diff -r fd9c565657b8 drivers/xen/balloon/common.h
--- a/drivers/xen/balloon/common.h    Thu Jun 04 16:26:49 2009 +0100
+++ b/drivers/xen/balloon/common.h    Fri Jun 05 11:56:22 2009 +0100
@@ -35,8 +35,6 @@
     /* We aim for 'current allocation' == 'target allocation'. */
     unsigned long current_pages;
     unsigned long target_pages;
-    /* We may hit the hard limit in Xen. If we do then we remember it. */
-    unsigned long hard_limit;
     /*
      * Drivers may alter the memory reservation independently, but they
      * must inform the balloon driver so we avoid hitting the hard limit.
diff -r fd9c565657b8 drivers/xen/balloon/sysfs.c
--- a/drivers/xen/balloon/sysfs.c    Thu Jun 04 16:26:49 2009 +0100
+++ b/drivers/xen/balloon/sysfs.c    Fri Jun 05 11:56:22 2009 +0100
@@ -53,9 +53,6 @@
 BALLOON_SHOW(current_kb, "%lu\n", PAGES2KB(bs.current_pages));
 BALLOON_SHOW(low_kb, "%lu\n", PAGES2KB(bs.balloon_low));
 BALLOON_SHOW(high_kb, "%lu\n", PAGES2KB(bs.balloon_high));
-BALLOON_SHOW(hard_limit_kb,
-         (bs.hard_limit!=~0UL) ? "%lu\n" : "???\n",
-         (bs.hard_limit!=~0UL) ? PAGES2KB(bs.hard_limit) : 0);
 BALLOON_SHOW(driver_kb, "%lu\n", PAGES2KB(bs.driver_pages));
 
 static ssize_t show_target_kb(struct sys_device *dev, char *buf)
@@ -96,7 +93,6 @@
     &attr_current_kb.attr,
     &attr_low_kb.attr,
     &attr_high_kb.attr,
-    &attr_hard_limit_kb.attr,
     &attr_driver_kb.attr,
     NULL
 };



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.