[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9


  • To: Pasi Kärkkäinen <pasik@xxxxxx>
  • From: kishore kumar <bodkekumar@xxxxxxxxx>
  • Date: Wed, 17 Mar 2010 17:34:36 -0700
  • Cc: Jeremy Fitzhardinge <jeremy@xxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Wed, 17 Mar 2010 17:37:19 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=IDBgYBktii+HI3vgDZ7Ph8OMMjadHIvLsF06LSWCDZBxZFX0nWmb1c43fbGVZQkdUB w8kYNiJ4auXRClsVHL0ZUu6jCju4VzA3DsaR6rowX0Z62qorr+mRn3R6bg00IA5OBxYf NTy1xcdWDsKn0YaTe8vmPljCsbPu+MDaR1A6M=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>


Attached is the newly captured file after compiling the new pvops dom 0 kernel 2.6.32.10 .

 

Machine still does not boot up.
 
Can any one let me know please??

On Wed, Mar 17, 2010 at 3:20 PM, kishore kumar <bodkekumar@xxxxxxxxx> wrote:
Here is the output of df -h and cat /etc/fstab of my machine.
 
Please let me know your thoughts.
 
[root@localhost kishore]# df -h

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/VolGroup01-LogVol00

                                    223G 29G 182G 14% /

/dev/sda1 99M 81M 13M 87% /boot

tmpfs 757M 0 757M 0% /dev/shm

[root@localhost kishore]# cat /etc/fstab

/dev/VolGroup01/LogVol00 / ext3 defaults 1 1

LABEL=/boot /boot ext3 defaults 1 2

tmpfs /dev/shm tmpfs defaults 0 0

devpts /dev/pts devpts gid=5,mode=620 0 0

sysfs /sys sysfs defaults 0 0

proc /proc proc defaults 0 0

/dev/VolGroup01/LogVol01 swap swap defaults 0 0

[root@localhost kishore]#



On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote:
>    I am not sure.  Can you please let me know how to check this? any command
>    ??

well simple "df -h" will show it. and also "cat /etc/fstab".
You can also check it from your grub configuration.. from the working baremetal (non-Xen) entry.

-- Pasi

>
>    On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
>      On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote:
>      >    attached  is the log captured in with the word document .
>      >
>
>      Scanning logical volumes
>       Reading all physical volumes.  This may take a while...
>      Activating logical volumes
>       Volume group "VolGroup01" not found
>      Trying to resume from /dev/VolGroup01/LogVol01
>      Unable to access resume device (/dev/VolGroup01/LogVol01)
>      Creating root device.
>      Mounting root filesystem.
>      mount: could not find filesystem '/dev/root'
>      Setting up other filesystems.
>      Setting up new root fs
>      setuproot: moving /dev failed: No such file or directory
>      no fstab.sys, mounting internal defaults
>      setuproot: error mounting /proc: No such file or directory
>      setuproot: error mounting /sys: No such file or directory
>      Switching to new root and running init.
>      unmounting old /dev
>      unmounting old /proc
>      unmounting old /sys
>      switchroot: mount failed: No such file or directory
>      init used greatest stack depth: 4088 bytes left
>      Kernel panic - not syncing: Attempted to kill init!
>
>      So it seems it gets all the way to executing the initrd image,
>      which then fails to mount the root fs.
>
>      Earlier in the log:
>      ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>      ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133
>      ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>      ata1.00: configured for UDMA/133
>      scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72102 STBO PQ: 0
>      ANSI: 5
>      sd 0:0:0:0: Attached scsi generic sg0 type 0
>      sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>      sd 0:0:0:0: [sda] Write Protect is off
>      sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>      sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>      support DPO or FUA
>       sda: sda1 sda2
>      sd 0:0:0:0: [sda] Attached SCSI disk
>
>      so /dev/sda was detected. Is your root lvm volume on /dev/sda ?
>      Is /dev/VolGroup01/LogVol01 really your root fs?
>
>      -- Pasi
>
>      >
>      >
>      >    On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen
>      <[1][2]pasik@xxxxxx> wrote:
>      >
>      >      On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote:
>      >      >    Please find the attached log file after fixing the dom 0
>      kernel cmd
>      >      line
>      >      >    as below
>      >      >
>      >      >    ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      earlyprintk=xen
>      >      nomodeset
>      >      >
>      >
>      >      There's something wrong with the log, the dom0 kernel parts are
>      all on
>      >      one line..
>      >      It's really difficult to read it.
>      >
>      >      -- Pasi
>      >
>      >      >    Thanks
>      >      >
>      >      >
>      >      >    On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen
>      >      <[1][2][3]pasik@xxxxxx> wrote:
>      >      >
>      >      >      On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar
>      wrote:
>      >      >      >    I did below steps.
>      >      >      >
>      >      >      >
>      >      >      >     I pulled DOM 0 kernel from
>      >      >      >    git clone
>      >      >
>      >
>      git://[1][2][3][4]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >    linux-2.6-xen
>      >      >      >
>      >      >      >    cd linux-2.6-xen
>      >      >      >
>      >      >      >    make clean
>      >      >      >
>      >      >      >    cp -a .config .config-old
>      >      >      >
>      >      >      >    wget -O .config
>      >      >      >
>      >      >
>      >
>       [2][3][4][5]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >
>      >      >      >    make oldconfig
>      >      >      >
>      >      >      >    make bzImage
>      >      >      >
>      >      >      >    make modules
>      >      >      >
>      >      >      >    make modules_install
>      >      >      >
>      >      >      >    cp -a .config /boot/config-2.6.32.9
>      >      >      >
>      >      >      >    cp -a System.map /boot/System.map-2.6.32.9
>      >      >      >
>      >      >      >    cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9
>      >      >      >
>      >      >      >    and modified the grub.conf as below
>      >      >      >
>      >      >      >
>      >      >      >    Root(hd0,0)
>      >      >      >
>      >      >      >     kernel /xen.gz console=vga,com1 com1=115200,8n1
>      msi=1
>      >      iommu=1
>      >      >      >
>      >      >      >     module /vmlinuz-2.6.32.9 ro
>      root=/dev/VolGroup01/LogVo100
>      >       rhgb
>      >      >      quiet
>      >      >      >
>      >      >      >     module /initrd-2.6.32.9.img
>      >      >      >
>      >      >      >
>      >      >      >    and rebooted the machine.  Then It booted with some
>      xen
>      >      messages
>      >      >      and
>      >      >      >    stopped.  Those were the messages captured from
>      serial
>      >      console.
>      >      >      >
>      >      >      >    Please let me know if I did something wrong here.
>      >      >      >
>      >      >
>      >      >      Please fix the kernel cmdline based on my earlier email,
>      and
>      >      capture and
>      >      >      post the
>      >      >      serial console log again!
>      >      >
>      >      >      -- Pasi
>      >      >      >
>      >      >      >
>      >      >      >    On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen
>      >      >      <[3][4][5][6]pasik@xxxxxx> wrote:
>      >      >      >
>      >      >      >      On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy
>      >      Fitzhardinge
>      >      >      wrote:
>      >      >      >      > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote:
>      >      >      >      >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi
>      >      Kärkkäinen
>      >      >      wrote:
>      >      >      >      >>
>      >      >      >      >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700,
>      kishore
>      >      kumar
>      >      >      wrote:
>      >      >      >      >>>
>      >      >      >      >>>>     Attached is the output captured from
>      serial
>      >      console.
>      >      >      >      >>>>
>      >      >      >      >>>>     Machine does not boot after compiling xen
>      3.4.3
>      >      with
>      >      >      pv_ops dom
>      >      >      >      0 kernel.
>      >      >      >      >>>>
>      >      >      >      >>>>     Please let me know what is going wrong
>      here.
>      >      >      >      >>>>
>      >      >      >      >>>>
>      >      >      >      >>> Ok this looks like a bug that is already being
>      sorted
>      >      out on
>      >      >      >      xen-devel mailinglist.
>      >      >      >      >>> I added CC to xen-devel.
>      >      >      >      >>>
>      >      >      >      >>>
>      >      >      >      >>
>      >      >      >      >
>      >      >      >      > Those messages are not a problem in themselves,
>      but the
>      >      related
>      >      >      >      problem
>      >      >      >      > is believed to be fixed in current
>      xen/stable-2.6.32.x.
>      >       It
>      >      >      looks like
>      >      >      >      > the output stops there because the Xen console
>      isn't set
>      >      up
>      >      >      properly
>      >      >      >      for
>      >      >      >      > some reason.
>      >      >      >      >
>      >      >      >
>      >      >      >      Yeah, remove "rhgb quiet" from the options.. the
>      dom0
>      >      kernel
>      >      >      cmdline
>      >      >      >      should be like this:
>      >      >      >      ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      >      earlyprintk=xen
>      >      >      nomodeset
>      >      >      >      -- Pasi
>      >      >      >
>      >      >      > References
>      >      >      >
>      >      >      >    Visible links
>      >      >      >    1.
>      >
>       [5][6][7]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >    2.
>      >      >
>      >
>      [6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >    3. mailto:[7][8][9]pasik@xxxxxx
>      >      >
>      >      > References
>      >      >
>      >      >    Visible links
>      >      >    1. mailto:[9][10]pasik@xxxxxx
>      >      >    2.
>      >
>       [10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >    3.
>      >
>       [11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >    4. mailto:[12][13]pasik@xxxxxx
>      >      >    5.
>      >
>       [13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >    6.
>      >
>       [14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >    7. mailto:[15][16]pasik@xxxxxx
>      >      > Asserting Post complete GPIO!!!
>      >      > Transfer control to CSM 16-bit binary for legacy boot
>      >      >  __  __            _____ _  _    _____             _  _
>      >      >  \ \/ /___ _ __   |___ /| || |  |___ /    _ __ ___| || |     _
>      __  _
>      >      __ ___
>      >      >   \  // _ \ '_ \    |_ \| || |_   |_ \ __| '__/ __| || |_ __|
>      '_ \|
>      >      '__/ _ \
>      >      >   /  \  __/ | | |  ___) |__   _| ___) |__| | | (__|__   _|__|
>      |_) | |
>      >      |  __/
>      >      >  /_/\_\___|_| |_| |____(_) |_|(_)____/   |_|  \___|  |_|    |
>      .__/|_|
>      >       \___|
>      >      >                                                             |_|
>      >      > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc
>      version
>      >      4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010
>      >      > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000
>      >      19924:6e72f8c3c017
>      >      > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1
>      iommu=1
>      >      > (XEN) Video information:
>      >      > (XEN)  VGA is text mode 80x25, font 8x16
>      >      > (XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
>      >      > (XEN)  EDID info not retrieved because no DDC retrieval method
>      >      detected
>      >      > (XEN) Disc information:
>      >      > (XEN)  Found 1 MBR signatures
>      >      > (XEN)  Found 1 EDD information structures
>      >      > (XEN) Xen-e820 RAM map:
>      >      > (XEN)  0000000000000000 - 000000000009d000 (usable)
>      >      > (XEN)  000000000009d000 - 00000000000a0000 (reserved)
>      >      > (XEN)  00000000000e0000 - 0000000000100000 (reserved)
>      >      > (XEN)  0000000000100000 - 000000006d597000 (usable)
>      >      > (XEN)  000000006d597000 - 000000006d686000 (reserved)
>      >      > (XEN)  000000006d686000 - 000000006f598000 (usable)
>      >      > (XEN)  000000006f598000 - 000000006f59a000 (reserved)
>      >      > (XEN)  000000006f59a000 - 000000006f5af000 (ACPI NVS)
>      >      > (XEN)  000000006f5af000 - 000000006f5d9000 (reserved)
>      >      > (XEN)  000000006f5d9000 - 000000006f5f9000 (ACPI data)
>      >      > (XEN)  000000006f5f9000 - 000000006f6df000 (ACPI NVS)
>      >      > (XEN)  000000006f6df000 - 000000006f700000 (ACPI data)
>      >      > (XEN)  000000006f700000 - 0000000080000000 (reserved)
>      >      > (XEN)  00000000a0000000 - 00000000b0000000 (reserved)
>      >      > (XEN)  00000000fc000000 - 00000000fd000000 (reserved)
>      >      > (XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
>      >      > (XEN)  00000000ffc00000 - 0000000100000000 (reserved)
>      >      > (XEN) System RAM: 1780MB (1823000kB)
>      >      > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL )
>      >      > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL  THRLY           0
>      >      1000013)
>      >      > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL  THRLY           0
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL  THRLY           3
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: FACS 6F5F9000, 0040
>      >      > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL  THRLY           0
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL  THRLY           0
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1  INTEL SSDT  PM     4000
>      INTL
>      >      20061109)
>      >      > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) Domain heap initialised
>      >      > (XEN) Processor #0 6:12 APIC version 21
>      >      > (XEN) Processor #2 6:12 APIC version 21
>      >      > (XEN) Processor #4 6:12 APIC version 21
>      >      > (XEN) Processor #16 6:12 APIC version 21
>      >      > (XEN) Processor #18 6:12 APIC version 21
>      >      > (XEN) Processor #20 6:12 APIC version 21
>      >      > (XEN) Processor #1 6:12 APIC version 21
>      >      > (XEN) Processor #3 6:12 APIC version 21
>      >      > (XEN) Processor #5 6:12 APIC version 21
>      >      > (XEN) Processor #17 6:12 APIC version 21
>      >      > (XEN) Processor #19 6:12 APIC version 21
>      >      > (XEN) Processor #21 6:12 APIC version 21
>      >      > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
>      0-23
>      >      > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI
>      24-47
>      >      > (XEN) Enabling APIC mode:  Phys.  Using 2 I/O APICs
>      >      > (XEN) Intel VT-d DMAR tables have been parsed.
>      >      > (XEN) Using scheduler: SMP Credit Scheduler (credit)
>      >      > (XEN) Detected 3200.207 MHz processor.
>      >      > (XEN) VMX: Supported advanced features:
>      >      > (XEN)  - APIC MMIO access virtualisation
>      >      > (XEN)  - APIC TPR shadow
>      >      > (XEN)  - Extended Page Tables (EPT)
>      >      > (XEN)  - Virtual-Processor Identifiers (VPID)
>      >      > (XEN)  - Virtual NMI
>      >      > (XEN)  - MSR direct-access bitmap
>      >      > (XEN) VMX: EPT is available.
>      >      > (XEN) VMX: VPID is available.
>      >      > (XEN) HVM: VMX enabled
>      >      > (XEN) HVM: Hardware Assisted Paging detected.
>      >      > (XEN) CPU0: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 1/2 eip 88000
>      >      > (XEN) CPU1: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 2/4 eip 88000
>      >      > (XEN) CPU2: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 3/16 eip 88000
>      >      > (XEN) CPU3: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 4/18 eip 88000
>      >      > (XEN) CPU4: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 5/20 eip 88000
>      >      > (XEN) CPU5: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 6/1 eip 88000
>      >      > (XEN) CPU6: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 7/3 eip 88000
>      >      > (XEN) CPU7: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 8/5 eip 88000
>      >      > (XEN) CPU8: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 9/17 eip 88000
>      >      > (XEN) CPU9: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 10/19 eip 88000
>      >      > (XEN) CPU10: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 11/21 eip 88000
>      >      > (XEN) CPU11: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Total of 12 processors activated.
>      >      > (XEN) ENABLING IO-APIC IRQs
>      >      > (XEN)  -> Using new ACK method
>      >      > (XEN) checking TSC synchronization across 12 CPUs: passed.
>      >      > (XEN) Platform timer is 14.318MHz HPET
>      >      > ?(XEN) Brought up 12 CPUs
>      >      > (XEN) Intel VT-d Snoop Control supported.
>      >      > (XEN) Intel VT-d DMA Passthrough not supported.
>      >      > (XEN) Intel VT-d Queued Invalidation supported.
>      >      > (XEN) Intel VT-d Interrupt Remapping supported.
>      >      > (XEN) I/O virtualisation enabled
>      >      > (XEN) I/O virtualisation for PV guests disabled
>      >      > (XEN) xenoprof: Initialization failed. Intel processor model 44
>      for P6
>      >      class family is not supported
>      >      > (XEN) *** LOADING DOMAIN 0 ***
>      >      > (XEN)  Xen  kernel: 64-bit, lsb, compat32
>      >      > (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->
>      0x26bb000
>      >      > (XEN) PHYSICAL MEMORY ARRANGEMENT:
>      >      > (XEN)  Dom0 alloc.:   0000000064000000->0000000068000000
>      (404490 pages
>      >      to be allocated)
>      >      > (XEN) VIRTUAL MEMORY ARRANGEMENT:
>      >      > (XEN)  Loaded kernel: ffffffff81000000->ffffffff826bb000
>      >      > (XEN)  Init. ramdisk: ffffffff826bb000->ffffffff82d0d800
>      >      > (XEN)  Phys-Mach map: ffffffff82d0e000->ffffffff83044050
>      >      > (XEN)  Start info:    ffffffff83045000->ffffffff830454b4
>      >      > (XEN)  Page tables:   ffffffff83046000->ffffffff83063000
>      >      > (XEN)  Boot stack:    ffffffff83063000->ffffffff83064000
>      >      > (XEN)  TOTAL:         ffffffff80000000->ffffffff83400000
>      >      > (XEN)  ENTRY ADDRESS: ffffffff819c1200
>      >      > (XEN) Dom0 has maximum 12 VCPUs
>      >      > (XEN) Scrubbing Free RAM: .done.
>      >      > (XEN) Xen trace buffers: disabled
>      >      > (XEN) Std. Loglevel: Errors and warnings
>      >      > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
>      warnings)
>      >      > (XEN) Xen is relinquishing VGA console.
>      >      > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to
>      switch
>      >      input to Xen)
>      >      > (XEN) Freed 128kB init memory.
>      >      > mapping kernel into physical memory
>      >      > Xen: setup ISA identity maps
>      >      > about to get started...
>      >      > Initializing cgroup subsys cpuset
>      >      > Initializing cgroup subsys cpu
>      >      > Linux version 2.6.32.9 (kishore@xxxxxxxxxxxxxxxxxxxxx) (gcc
>      version
>      >      4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT
>      2010
>      >      > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      >      earlyprintk=xen nomodeset
>      >      > KERNEL supported cpus:
>      >      >   Intel GenuineIntel
>      >      >   AMD AuthenticAMD
>      >      >   Centaur CentaurHauls
>      >      > BIOS-provided physical RAM map:
>      >      >  Xen: 0000000000000000 - 000000000009d000 (usable)
>      >      >  Xen: 000000000009d000 - 0000000000100000 (reserved)
>      >      >  Xen: 0000000000100000 - 0000000066c0a000 (usable)
>      >      >  Xen: 000000006d597000 - 000000006d686000 (reserved)
>      >      >  Xen: 000000006f598000 - 000000006f59a000 (reserved)
>      >      >  Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS)
>      >      >  Xen: 000000006f5af000 - 000000006f5d9000 (reserved)
>      >      >  Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data)
>      >      >  Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS)
>      >      >  Xen: 000000006f6df000 - 000000006f700000 (ACPI data)
>      >      >  Xen: 000000006f700000 - 0000000080000000 (reserved)
>      >      >  Xen: 00000000a0000000 - 00000000b0000000 (reserved)
>      >      >  Xen: 00000000fc000000 - 00000000fd000000 (reserved)
>      >      >  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
>      >      >  Xen: 00000000ffc00000 - 0000000100000000 (reserved)
>      >      > bootconsole [xenboot0] enabled
>      >      > DMI 2.4 present.
>      >      > last_pfn = 0x66c0a max_arch_pfn = 0x400000000
>      >      > init_memory_mapping: 0000000000000000-0000000066c0a000
>      >      > RAMDISK: 026bb000 - 02d0d800
>      >      > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL )
>      >      > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL  THRLY    00000000
>      >       01000013)
>      >      > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL  THRLY    00000000
>      MSFT
>      >      0100000D)
>      >      > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL  THRLY    00000003
>      MSFT
>      >      0100000D)
>      >      > ACPI: FACS 000000006f5f9000 00040
>      >      > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL  THRLY    00000000
>      MSFT
>      >      0100000D)
>      >      > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL  THRLY    00000000
>      MSFT
>      >      0100000D)
>      >      > ACPI: SSDT 000000006f5d9000 1FDDC (v01  INTEL SSDT  PM 00004000
>      INTL
>      >      20061109)
>      >      > ACPI:      000000006f6ee000 001D0 (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > No NUMA configuration found
>      >      > Faking a node at 0000000000000000-0000000066c0a000
>      >      > Bootmem setup node 0 0000000000000000-0000000066c0a000
>      >      >   NODE_DATA [0000000000008000 - 000000000001ffff]
>      >      >   bootmap [0000000000020000 -  000000000002cd87] pages d
>      >      > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000]
>      >      >   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000
>      -
>      >      0000001000]
>      >      >   #1 [0003046000 - 0003063000]   XEN PAGETABLES ==> [0003046000
>      -
>      >      0003063000]
>      >      >   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000
>      -
>      >      0000008000]
>      >      >   #3 [0001000000 - 000269ae98]    TEXT DATA BSS ==> [0001000000
>      -
>      >      000269ae98]
>      >      >   #4 [00026bb000 - 0002d0d800]          RAMDISK ==> [00026bb000
>      -
>      >      0002d0d800]
>      >      >   #5 [0002d0e000 - 0003046000]   XEN START INFO ==> [0002d0e000
>      -
>      >      0003046000]
>      >      >   #6 [000269b000 - 000269b011]              BRK ==> [000269b000
>      -
>      >      000269b011]
>      >      >   #7 [0000100000 - 000041a000]          PGTABLE ==> [0000100000
>      -
>      >      000041a000]
>      >      >   #8 [0000001000 - 0000001030]        ACPI SLIT ==> [0000001000
>      -
>      >      0000001030]
>      >      > found SMP MP-table at [ffff8800000fd750] fd750
>      >      > Zone PFN ranges:
>      >      >   DMA      0x00000000 -> 0x00001000
>      >      >   DMA32    0x00001000 -> 0x00100000
>      >      >   Normal   0x00100000 -> 0x00100000
>      >      > Movable zone start PFN for each node
>      >      > early_node_map[2] active PFN ranges
>      >      >     0: 0x00000000 -> 0x0000009d
>      >      >     0: 0x00000100 -> 0x00066c0a
>      >      > ACPI: PM-Timer IO Port: 0x408
>      >      > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
>      >      > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>      >      > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
>      >      > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
>      >      > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >      > ERROR: Unable to locate IOAPIC for GSI 2
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>      >      > ERROR: Unable to locate IOAPIC for GSI 9
>      >      > Using ACPI (MADT) for SMP configuration information
>      >      > ACPI: HPET id: 0x8086a401 base: 0xfed00000
>      >      > SMP: Allowing 12 CPUs, 0 hotplug CPUs
>      >      > PM: Registered nosave memory: 000000000009d000 -
>      0000000000100000
>      >      > Allocating PCI resources starting at b0000000 (gap:
>      b0000000:4c000000)
>      >      > Booting paravirtualized kernel on Xen
>      >      > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0)
>      >      > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
>      >      > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192
>      d21672
>      >      u1957888
>      >      > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096
>      >      > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06
>      [0] 07
>      >      > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
>      >      > Xen: using vcpu_info placement
>      >      > Built 1 zonelists in Node order, mobility grouping on.  Total
>      pages:
>      >      409291
>      >      > Policy zone: DMA32
>      >      > Kernel command line: ro root=/dev/VolGroup01/LogVol00
>      console=hvc0
>      >      earlyprintk=xen nomodeset
>      >      > PID hash table entries: 4096 (order: 3, 32768 bytes)
>      >      > Initializing CPU#0
>      >      > DMA: Placing 64MB software IO TLB between ffff880007525000 -
>      >      ffff88000b525000
>      >      > DMA: software IO TLB at phys 0x7525000 - 0xb525000
>      >      > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864
>      >      > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768
>      >      > Memory: 1514268k/1683496k available (4654k kernel code, 396k
>      absent,
>      >      168832k reserved, 3443k data, 3396k init)
>      >      > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
>      CPUs=12,
>      >      Nodes=1
>      >      > Hierarchical RCU implementation.
>      >      > NR_IRQS:4352 nr_irqs:3072
>      >      > Already setup the GSI :0
>      >      > Already setup the GSI :1
>      >      > Already setup the GSI :2
>      >      > Already setup the GSI :3
>      >      > Already setup the GSI :4
>      >      > Already setup the GSI :5
>      >      > Already setup the GSI :6
>      >      > Already setup the GSI :7
>      >      > Already setup the GSI :8
>      >      > Already setup the GSI :9
>      >      > Already setup the GSI :10
>      >      > Already setup the GSI :11
>      >      > Already setup the GSI :12
>      >      > Already setup the GSI :13
>      >      > Already setup the GSI :14
>      >      > Already setup the GSI :15
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>      >      > xen: sci override: source_irq=9 global_irq=9 trigger=c
>      polarity=1
>      >      > xen_allocate_pirq: returning irq 9 for gsi 9
>      >      > Already setup the GSI :9
>      >      > xen: acpi sci 9
>      >      > Console: colour VGA+ 80x25
>      >      > console [hvc0] enabled, bootconsole disabled console [hvc0]
>      enabled,
>      >      bootconsole disabled
>      >      > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
>      Ingo
>      >      Molnar ... MAX_LOCKDEP_SUBCLASSES:  8 ... MAX_LOCK_DEPTH:
>       48
>      >      ... MAX_LOCKDEP_KEYS:        8191 ... CLASSHASH_SIZE:
>       4096 ...
>      >      MAX_LOCKDEP_ENTRIES:     16384 ... MAX_LOCKDEP_CHAINS:      32768
>      ...
>      >      CHAINHASH_SIZE:          16384  memory used by lock dependency
>      info:
>      >      6367 kB  per task-struct memory footprint: 2688 bytes allocated
>      17039360
>      >      bytes of page_cgroup please try 'cgroup_disable=memory' option if
>      you
>      >      don't want memory cgroups installing Xen timer for CPU 0 Detected
>      >      3200.206 MHz processor. Calibrating delay loop (skipped), value
>      >      calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206)
>      >      Security Framework initialized SELinux:  Initializing. Dentry
>      cache hash
>      >      table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash
>      table
>      >      entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table
>      >      entries: 256 Initializing cgroup subsys ns Initializing cgroup
>      subsys
>      >      cpuacct Initializing cgroup subsys memory Initializing cgroup
>      subsys
>      >      devices Initializing cgroup subsys freezer Initializing cgroup
>      subsys
>      >      net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K
>      CPU:
>      >      L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of
>      siblings
>      >      32 Performance Events: unsupported p6 CPU model 44 no PMU driver,
>      >      software events only. lockdep: fixing up alternatives. SMP
>      alternatives:
>      >      switching to UP code ACPI: Core revision 20090903 ftrace:
>      converting
>      >      mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries
>      in 110
>      >      pages installing Xen timer for CPU 1 lockdep: fixing up
>      alternatives.
>      >      SMP alternatives: switching to SMP code Initializing CPU#1 CPU:
>      L1 I
>      >      cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>      12288K
>      >      CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>      installing
>      >      Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D
>      cache:
>      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0
>      CPU:
>      >      Unsupported number of siblings 32 installing Xen timer for CPU 3
>      >      Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
>      cache:
>      >      256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported
>      number
>      >      of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4
>      CPU: L1
>      >      I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>      12288K
>      >      CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>      installing
>      >      Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D
>      cache:
>      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0
>      CPU:
>      >      Unsupported number of siblings 32 installing Xen timer for CPU 6
>      >      Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
>      cache:
>      >      256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported
>      number
>      >      of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7
>      CPU: L1
>      >      I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>      12288K
>      >      CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>      installing
>      >      Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D
>      cache:
>      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0
>      CPU:
>      >      Unsupported number of siblings 32 installing Xen timer for CPU 9
>      >      Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
>      cache:
>      >      256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported
>      number
>      >      of siblings 32 installing Xen timer for CPU 10 Initializing
>      CPU#10 CPU:
>      >      L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>      cache:
>      >      12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings
>      32
>      >      installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I
>      cache:
>      >      32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K
>      CPU
>      >      11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought
>      up 12
>      >      CPUs Grant table initialized regulator: core version 0.5 Time:
>      14:45:00
>      >       Date: 03/16/10 NET: Registered protocol family 16
>      xenbus_probe_init ok
>      >      ACPI FADT declares the system doesn't support PCIe ASPM, so
>      disable it
>      >      ACPI: bus type pci registered PCI: MCFG configuration 0: base
>      a0000000
>      >      segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in
>      E820 PCI:
>      >      Using MMCONFIG at a0000000 - afffffff PCI: Using configuration
>      type 1
>      >      for base access bio: create slab <bio-0> at 0 ACPI Error: Field
>      [CPB3]
>      >      at 96 exceeds Buffer [NULL] size 64 (bits)
>      (20090903/dsopcode-596) ACPI
>      >      Error (psparse-0537): Method parse/execution failed [\_SB_._OSC]
>      (Node
>      >      ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled
>      ACPI:
>      >      (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt
>      routing ACPI
>      >      Warning: Incorrect checksum in table [    ] - 97, should be DB
>      >      (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI
>      Root
>      >      Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0
>      D3hot
>      >      D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME#
>      supported
>      >      from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci
>      0000:00:03.0:
>      >      PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME#
>      disabled pci
>      >      0000:00:04.0: PME# supported from D0 D3hot D3cold pci
>      0000:00:04.0: PME#
>      >      disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0:
>      PME#
>      >      supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled
>      pci
>      >      0000:00:08.0: PME# supported from D0 D3hot D3cold pci
>      0000:00:08.0: PME#
>      >      disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0:
>      PME#
>      >      supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled
>      pci
>      >      0000:00:1a.7: PME# supported from D0 D3hot D3cold pci
>      0000:00:1a.7: PME#
>      >      disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5:
>      PME#
>      >      supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled
>      pci
>      >      0000:00:1d.7: PME# supported from D0 D3hot D3cold pci
>      0000:00:1d.7: PME#
>      >      disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by
>      ICH6
>      >      ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed
>      by ICH6
>      >      GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680
>      (mask
>      >      000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0
>      (mask
>      >      000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600
>      (mask
>      >      001f) pci 0000:00:1f.2: PME# supported from D3hot pci
>      0000:00:1f.2: PME#
>      >      disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0:
>      disabling
>      >      ASPM on pre-1.1 PCIe device.  You can enable it with
>      'pcie_aspm=force'
>      >      pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1]
>      >      (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI
>      Interrupt
>      >      Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI
>      Interrupt Link
>      >      [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt
>      Link
>      >      [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt
>      Link
>      >      [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt
>      Link
>      >      [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI
>      >      Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI:
>      PCI
>      >      Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>      disabled.
>      >      ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14
>      15)
>      >      xenbus_probe_backend_init bus registered ok
>      xenbus_probe_frontend_init
>      >      bus registered ok xen_balloon: Initialising balloon driver with
>      page
>      >      order 0. vgaarb: device added:
>      >      PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb:
>      loaded
>      >      SCSI subsystem initialized usbcore: registered new interface
>      driver
>      >      usbfs usbcore: registered new interface driver hub usbcore:
>      registered
>      >      new device driver usb PCI: Using ACPI for IRQ routing NetLabel:
>      >      Initializing NetLabel:  domain hash size = 128 NetLabel:
>       protocols =
>      >      UNLABELED CIPSOv4 NetLabel:  unlabeled traffic allowed by default
>      >      Switching to clocksource xen kstop/0 used greatest stack depth:
>      6568
>      >      bytes left kstop/1 used greatest stack depth: 6536 bytes left
>      pnp: PnP
>      >      ACPI init ACPI: bus type pnp registered xen_allocate_pirq:
>      returning irq
>      >      8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning
>      irq 13
>      >      for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13
>      devices
>      >      ACPI: ACPI bus type pnp unregistered system 00:07: ioport range
>      >      0x500-0x53f has been reserved system 00:07: ioport range
>      0x400-0x47f has
>      >      been reserved system 00:07: ioport range 0x800-0x81f has been
>      reserved
>      >      system 00:07: ioport range 0x2f8-0x2ff has been reserved system
>      00:07:
>      >      iomem range 0xfed1c000-0xfed8bffe could not be reserved system
>      00:07:
>      >      iomem range 0xff000000-0xffffffff could not be reserved system
>      00:07:
>      >      iomem range 0xfee00000-0xfeefffff has been reserved system 00:07:
>      iomem
>      >      range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem
>      range
>      >      0xfea00000-0xfea0001f has been reserved system 00:07: iomem range
>      >      0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6:
>      no
>      >      parent found for of device [0xffff0000-0xffffffff] pci
>      0000:00:01.0: PCI
>      >      bridge, secondary bus 0000:01 pci 0000:00:01.0:   IO window:
>      >      0x1000-0x1fff pci 0000:00:01.0:   MEM window:
>      0xb1900000-0xb19fffff pci
>      >      0000:00:01.0:   PREFETCH window: disabled pci 0000:00:02.0: PCI
>      bridge,
>      >      secondary bus 0000:02 pci 0000:00:02.0:   IO window: disabled pci
>      >      0000:00:02.0:   MEM window: disabled pci 0000:00:02.0:   PREFETCH
>      >      window: disabled pci 0000:00:03.0: PCI bridge, secondary bus
>      0000:03 pci
>      >      0000:00:03.0:   IO window: disabled pci 0000:00:03.0:   MEM
>      window:
>      >      disabled pci 0000:00:03.0:   PREFETCH window: disabled pci
>      0000:00:04.0:
>      >      PCI bridge, secondary bus 0000:04 pci 0000:00:04.0:   IO window:
>      >      disabled pci 0000:00:04.0:   MEM window: disabled pci
>      0000:00:04.0:
>      >      PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary
>      bus
>      >      0000:05 pci 0000:00:05.0:   IO window: disabled pci 0000:00:05.0:
>        MEM
>      >      window: disabled pci 0000:00:05.0:   PREFETCH window: disabled
>      pci
>      >      0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0:
>        IO
>      >      window: disabled pci 0000:00:06.0:   MEM window: disabled pci
>      >      0000:00:06.0:   PREFETCH window: disabled pci 0000:00:07.0: PCI
>      bridge,
>      >      secondary bus 0000:07 pci 0000:00:07.0:   IO window: disabled pci
>      >      0000:00:07.0:   MEM window: disabled pci 0000:00:07.0:   PREFETCH
>      >      window: disabled pci 0000:00:08.0: PCI bridge, secondary bus
>      0000:08 pci
>      >      0000:00:08.0:   IO window: disabled pci 0000:00:08.0:   MEM
>      window:
>      >      disabled pci 0000:00:08.0:   PREFETCH window: disabled pci
>      0000:00:09.0:
>      >      PCI bridge, secondary bus 0000:09 pci 0000:00:09.0:   IO window:
>      >      0x3000-0x3fff pci 0000:00:09.0:   MEM window:
>      0xb1b00000-0xb1cfffff pci
>      >      0000:00:09.0:   PREFETCH window:
>      0x000000b1d00000-0x000000b1efffff pci
>      >      0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0:
>        IO
>      >      window: disabled pci 0000:00:0a.0:   MEM window: disabled pci
>      >      0000:00:0a.0:   PREFETCH window: disabled pci 0000:00:1c.0: PCI
>      bridge,
>      >      secondary bus 0000:0b pci 0000:00:1c.0:   IO window: disabled pci
>      >      0000:00:1c.0:   MEM window: disabled pci 0000:00:1c.0:   PREFETCH
>      >      window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus
>      0000:0c pci
>      >      0000:00:1c.4:   IO window: disabled pci 0000:00:1c.4:   MEM
>      window:
>      >      0xb1000000-0xb18fffff pci 0000:00:1c.4:   PREFETCH window:
>      >      0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge,
>      >      secondary bus 0000:0d pci 0000:00:1c.5:   IO window: disabled pci
>      >      0000:00:1c.5:   MEM window: disabled pci 0000:00:1c.5:   PREFETCH
>      >      window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus
>      0000:0e pci
>      >      0000:00:1e.0:   IO window: disabled pci 0000:00:1e.0:   MEM
>      window:
>      >      disabled pci 0000:00:1e.0:   PREFETCH window: disabled pci
>      0000:00:01.0:
>      >      PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI
>      INT A
>      >      -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A ->
>      GSI 24
>      >      (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25
>      (level,
>      >      low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low)
>      -> IRQ
>      >      26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
>      pci
>      >      0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci
>      >      0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci
>      >      0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci
>      >      0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci
>      >      0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>      >      xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the
>      GSI :16
>      >      pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci
>      >      0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET:
>      Registered
>      >      protocol family 2 IP route cache hash table entries: 65536
>      (order: 7,
>      >      524288 bytes) TCP established hash table entries: 262144 (order:
>      10,
>      >      4194304 bytes) TCP bind hash table entries: 65536 (order: 10,
>      4718592
>      >      bytes) TCP: Hash tables configured (established 262144 bind
>      65536) TCP
>      >      reno registered NET: Registered protocol family 1 pci
>      0000:01:00.0:
>      >      Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack
>      rootfs
>      >      image as initramfs... Freeing initrd memory: 6474k freed DMA-API:
>      >      preallocated 32768 debug entries DMA-API: debugging enabled by
>      kernel
>      >      config PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>      DMA:
>      >      Placing 64MB software IO TLB between ffff880007525000 -
>      ffff88000b525000
>      >      DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit:
>      initializing
>      >      netlink socket (disabled) type=2000 audit(1268750702.035:1):
>      initialized
>      >      HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS:
>      Disk
>      >      quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0,
>      4096
>      >      bytes) msgmni has been set to 2970 cryptomgr_test used greatest
>      stack
>      >      depth: 5864 bytes left cryptomgr_test used greatest stack depth:
>      5816
>      >      bytes left alg: No test for stdrng (krng) Block layer SCSI
>      generic (bsg)
>      >      driver version 0.4 loaded (major 252) io scheduler noop
>      registered io
>      >      scheduler anticipatory registered io scheduler deadline
>      registered io
>      >      scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI
>      Core
>      >      version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086
>      device_id
>      >      3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller
>      Driver
>      >      version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver
>      version: 0.5
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      pci-stub: invalid id string "" input: Sleep Button as
>      >      /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI:
>      Sleep
>      >      Button [SLPB] input: Power Button as
>      >      /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button
>      [PWRF]
>      >      registering netback hpet_acpi_add: no address or irqs in _CRS
>      >      Non-volatile memory driver v1.3 Linux agpgart interface v0.103
>      Serial:
>      >      8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1
>      at I/O
>      >      0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module
>      loaded
>      >      input: Macintosh mouse button emulation as
>      /devices/virtual/input/input2
>      >      ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>      ahci
>      >      0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl
>      SATA mode
>      >      ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
>      ccc
>      >      ems  scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 :
>      ahci
>      >      scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040,
>      connection
>      >      status changed irq 2996 ata2: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0
>      >      'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7:
>      PCI INT
>      >      C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI
>      Host
>      >      Controller ehci_hcd 0000:00:1a.7: new USB bus registered,
>      assigned bus
>      >      number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd
>      0000:00:1a.7: irq
>      >      18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started,
>      EHCI 1.00
>      >      usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb
>      usb1:
>      >      New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb
>      usb1:
>      >      Product: EHCI Host Controller usb usb1: Manufacturer: Linux
>      2.6.32.9
>      >      ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1:
>      configuration #1
>      >      chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6
>      ports
>      >      detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
>      -> IRQ
>      >      23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd
>      0000:00:1d.7:
>      >      new USB bus registered, assigned bus number 2 ehci_hcd
>      0000:00:1d.7:
>      >      debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000
>      ehci_hcd
>      >      0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device
>      found,
>      >      idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings:
>      Mfr=3,
>      >      Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller
>      usb
>      >      usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2:
>      SerialNumber:
>      >      0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub
>      >      2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd:
>      USB 1.1
>      >      'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host
>      >      Controller Interface driver xen_allocate_pirq: returning irq 16
>      for gsi
>      >      16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A ->
>      GSI 16
>      >      (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host
>      Controller
>      >      uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>      number 3
>      >      uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New
>      USB
>      >      device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB
>      device
>      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI
>      Host
>      >      Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb
>      usb3:
>      >      SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from
>      1
>      >      choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected
>      uhci_hcd
>      >      0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd
>      >      0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB
>      bus
>      >      registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21,
>      io base
>      >      0x000020c0 usb usb4: New USB device found, idVendor=1d6b,
>      idProduct=0001
>      >      usb usb4: New USB device strings: Mfr=3, Product=2,
>      SerialNumber=1 usb
>      >      usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux
>      >      2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4:
>      >      configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found
>      hub
>      >      4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for
>      gsi 19
>      >      Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI
>      19
>      >      (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host
>      Controller
>      >      uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
>      number 5
>      >      uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New
>      USB
>      >      device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB
>      device
>      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI
>      Host
>      >      Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb
>      usb5:
>      >      SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from
>      1
>      >      choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected
>      >      xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the
>      GSI :23
>      >      uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>      >      uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd
>      0000:00:1d.0: new
>      >      USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0:
>      irq 23,
>      >      io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b,
>      >      idProduct=0001 usb usb6: New USB device strings: Mfr=3,
>      Product=2,
>      >      SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6:
>      >      Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber:
>      >      0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub
>      >      6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected
>      xen_allocate_pirq:
>      >      returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd
>      >      0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd
>      >      0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB
>      bus
>      >      registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19,
>      io base
>      >      0x00002060 usb usb7: New USB device found, idVendor=1d6b,
>      idProduct=0001
>      >      usb usb7: New USB device strings: Mfr=3, Product=2,
>      SerialNumber=1 usb
>      >      usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux
>      >      2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7:
>      >      configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found
>      hub
>      >      7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for
>      gsi 18
>      >      Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI
>      18
>      >      (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host
>      Controller
>      >      uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
>      number 8
>      >      uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New
>      USB
>      >      device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB
>      device
>      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI
>      Host
>      >      Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb
>      usb8:
>      >      SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from
>      1
>      >      choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected
>      PNP: No
>      >      PS/2 controller found. Probing ports directly. i8042.c: No
>      controller
>      >      found. mice: PS/2 mouse device common for all mice rtc_cmos
>      00:03: RTC
>      >      can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as
>      rtc0
>      >      rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper:
>      >      uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl
>      (2009-04-01)
>      >      initialised: [16][17]dm-devel@xxxxxxxxxx cpuidle: using governor
>      ladder
>      >      cpuidle: using governor menu usbcore: registered new interface
>      driver
>      >      hiddev usbcore: registered new interface driver usbhid usbhid:
>      v2.6:USB
>      >      HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536
>      max)
>      >      CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
>      use
>      >      nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
>      option
>      >      or sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>      ip_tables: (C)
>      >      2000-2006 Netfilter Core Team TCP cubic registered Initializing
>      XFRM
>      >      netlink socket NET: Registered protocol family 17 registered
>      taskstats
>      >      version 1 No TPM chip found, activating TPM-bypass!   Magic
>      number:
>      >      2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting
>      system
>      >      clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network
>      drop
>      >      monitor service ata2: SATA link down (SStatus 0 SControl 300)
>      ata4: SATA
>      >      link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus
>      0
>      >      SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3:
>      SATA
>      >      link down (SStatus 0 SControl 300) usb 7-1: new low speed USB
>      device
>      >      using uhci_hcd and address 2
>      >       ====================================================== [ INFO:
>      >      SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1
>      >      ------------------------------------------------------ khubd/100
>      >      [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
>       (&retval->lock){......},
>      >      at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8  and this task
>      is
>      >      already holding:  (&uhci->lock){..-...}, at: [<ffffffff8137aedd>]
>      >      uhci_urb_enqueue+0x46/0x7e3 which would create a new lock
>      dependency:
>      >       (&uhci->lock){..-...} -> (&retval->lock){......}  but this new
>      >      dependency connects a SOFTIRQ-irq-safe lock:
>       (&uhci->lock){..-...} ...
>      >      which became SOFTIRQ-irq-safe at:   [<ffffffff8108ea6d>]
>      >      __lock_acquire+0x2d2/0xc07   [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >        [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86
>      >      [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c
>      >      [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a
>      >      [<ffffffff8135a479>] rh_timer_func+0xe/0x10
>      [<ffffffff810693bd>]
>      >      run_timer_softirq+0x1a6/0x257   [<ffffffff810627e4>]
>      >      __do_softirq+0xe6/0x1bc   [<ffffffff81013fac>]
>      call_softirq+0x1c/0x30
>      >      [<ffffffff81015794>] do_softirq+0x4b/0xa7   [<ffffffff81062229>]
>      >      irq_exit+0x4a/0x89   [<ffffffff812bf9d9>]
>      >      xen_evtchn_do_upcall+0x156/0x172   [<ffffffff81013ffe>]
>      >      xen_do_hypervisor_callback+0x1e/0x30  to a SOFTIRQ-irq-unsafe
>      lock:
>      >       (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ...
>      >       [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07
>      [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2   [<ffffffff814853bc>]
>      _spin_lock+0x36/0x6b
>      >      [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a
>      >      [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>      [<ffffffff8100e58c>]
>      >      xen_alloc_ptpage+0x51/0x82   [<ffffffff8100e5d0>]
>      >      xen_alloc_pud+0x13/0x15   [<ffffffff810fe3cf>]
>      __pud_alloc+0x79/0xb3
>      >      [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>      >      [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>      [<ffffffff8110c197>]
>      >      map_vm_area+0x34/0x47   [<ffffffff8110c2cf>]
>      >      __vmalloc_area_node+0x125/0x14d   [<ffffffff8110c379>]
>      >      __vmalloc_node+0x82/0x91   [<ffffffff8110c4e9>]
>      __vmalloc+0x20/0x22
>      >      [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe
>      >      [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>      [<ffffffff819c1d99>]
>      >      start_kernel+0x3de/0x426   [<ffffffff819c12c3>]
>      >      x86_64_start_reservations+0xae/0xb2   [<ffffffff819c4d5d>]
>      >      xen_start_kernel+0x4b9/0x4c0  other info that might help us debug
>      this:
>      >       2 locks held by khubd/100:  #0:  (usb_address0_mutex){+.+...},
>      at:
>      >      [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4  #1:
>      >       (&uhci->lock){..-...}, at: [<ffffffff8137aedd>]
>      >      uhci_urb_enqueue+0x46/0x7e3  the dependencies between
>      SOFTIRQ-irq-safe
>      >      lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 {
>      >       IN-SOFTIRQ-W at:                         [<ffffffff8108ea6d>]
>      >      __lock_acquire+0x2d2/0xc07
>      [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2
>      [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86
>      >      [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c
>      >          [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a
>      >                [<ffffffff8135a479>] rh_timer_func+0xe/0x10
>      >            [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257
>      >              [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc
>      >          [<ffffffff81013fac>] call_softirq+0x1c/0x30
>      >      [<ffffffff81015794>] do_softirq+0x4b/0xa7
>      >      [<ffffffff81062229>] irq_exit+0x4a/0x89
>      >      [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172
>      >            [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30
>      >       INITIAL USE at:                        [<ffffffff8108eb29>]
>      >      __lock_acquire+0x38e/0xc07
>       [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2
>       [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86
>       [<ffffffff8137c3d7>]
>      >      uhci_hub_control+0x74/0x401
>       [<ffffffff8135bdac>]
>      >      usb_hcd_submit_urb+0x7a6/0xa1e
>      >       [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1
>      >       [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1
>      >         [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113
>      >       [<ffffffff81358922>] hub_probe+0x37c/0xfaa
>      >       [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7
>      >           [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >             [<ffffffff813077fa>] __device_attach+0x28/0x31
>      >           [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85
>      >         [<ffffffff81307891>] device_attach+0x65/0x7c
>      >       [<ffffffff8130667e>] bus_probe_device+0x27/0x3e
>      >       [<ffffffff813045b3>] device_add+0x3ab/0x57d
>      >       [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677
>      >             [<ffffffff81367b85>] generic_probe+0x67/0xae
>      >         [<ffffffff813607b1>] usb_probe_device+0x7f/0x87
>      >       [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >         [<ffffffff813077fa>] __device_attach+0x28/0x31
>      >       [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85
>      >       [<ffffffff81307891>] device_attach+0x65/0x7c
>      >       [<ffffffff8130667e>] bus_probe_device+0x27/0x3e
>      >       [<ffffffff813045b3>] device_add+0x3ab/0x57d
>      >       [<ffffffff8135616e>] usb_new_device+0x154/0x201
>      >       [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d
>      >       [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1
>      >         [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b
>      >       [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7
>      >       [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >         [<ffffffff813077ae>] __driver_attach+0x59/0x7d
>      >       [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83
>      >       [<ffffffff813073fd>] driver_attach+0x21/0x23
>      >       [<ffffffff81306487>] bus_add_driver+0xe1/0x26b
>      >       [<ffffffff81307ad5>] driver_register+0xa3/0x11a
>      >       [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2
>      >           [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1
>      >       [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>      >       [<ffffffff819c1961>] kernel_init+0x172/0x1cc
>      >       [<ffffffff81013eaa>] child_rip+0xa/0x20  }  ... key      at:
>      >      [<ffffffff8268de38>] __key.33456+0x0/0x8  ... acquired at:
>      >       [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5
>       [<ffffffff8108f128>]
>      >      __lock_acquire+0x98d/0xc07    [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2    [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86    [<ffffffff8111178c>]
>      >      dma_pool_alloc+0x36/0x2a8    [<ffffffff8137aa7b>]
>      >      uhci_alloc_qh+0x33/0x146    [<ffffffff8137af66>]
>      >      uhci_urb_enqueue+0xcf/0x7e3    [<ffffffff8135be92>]
>      >      usb_hcd_submit_urb+0x88c/0xa1e    [<ffffffff8135c6b2>]
>      >      usb_submit_urb+0x297/0x2f1    [<ffffffff8135d51f>]
>      >      usb_start_wait_urb+0x54/0x1b1    [<ffffffff8135d8a1>]
>      >      usb_control_msg+0xee/0x113    [<ffffffff813551fb>]
>      >      hub_port_init+0x31d/0x7e4    [<ffffffff81356d68>]
>      >      hub_events+0x91e/0x11a2    [<ffffffff81358432>]
>      hub_thread+0x25/0x199
>      >       [<ffffffff8107b8fd>] kthread+0x6e/0x76    [<ffffffff81013eaa>]
>      >      child_rip+0xa/0x20   the dependencies between the lock to be
>      acquired
>      >      and SOFTIRQ-irq-unsafe lock:  -> (purge_lock){+.+...} ops: 0 {
>      >      HARDIRQ-ON-W at:                           [<ffffffff8108eaba>]
>      >      __lock_acquire+0x31f/0xc07
>      >      [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>      >      [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>      >      [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a
>      >              [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>      >                  [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82
>      >                    [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15
>      >                  [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>      >              [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>      >                        [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>      >                        [<ffffffff8110c197>] map_vm_area+0x34/0x47
>      >                    [<ffffffff8110c2cf>]
>      __vmalloc_area_node+0x125/0x14d
>      >                          [<ffffffff8110c379>] __vmalloc_node+0x82/0x91
>      >                          [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>      >                    [<ffffffff819dfef1>]
>      alloc_large_system_hash+0x150/0x1fe
>      >                              [<ffffffff819e28c5>]
>      vfs_caches_init+0xa9/0x11d
>      >                                [<ffffffff819c1d99>]
>      start_kernel+0x3de/0x426
>      >                                [<ffffffff819c12c3>]
>      >      x86_64_start_reservations+0xae/0xb2
>      >      [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0
>      SOFTIRQ-ON-W at:
>      >                              [<ffffffff8108eadc>]
>      __lock_acquire+0x341/0xc07
>      >                                [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >                              [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>      >                          [<ffffffff8110aa20>]
>      >      __purge_vmap_area_lazy+0x54/0x18a
>      >      [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>      >          [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82
>      >            [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15
>      >          [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>      >      [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>      >                [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>      >                [<ffffffff8110c197>] map_vm_area+0x34/0x47
>      >            [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d
>      >                  [<ffffffff8110c379>] __vmalloc_node+0x82/0x91
>      >                  [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>      >            [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe
>      >                      [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>      >                        [<ffffffff819c1d99>] start_kernel+0x3de/0x426
>      >                        [<ffffffff819c12c3>]
>      >      x86_64_start_reservations+0xae/0xb2
>      >      [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0     INITIAL USE
>      at:
>      >                             [<ffffffff8108eb29>]
>      __lock_acquire+0x38e/0xc07
>      >                             [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >                         [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>      >                   [<ffffffff8110aa20>]
>      __purge_vmap_area_lazy+0x54/0x18a
>      >                           [<ffffffff8110c82f>]
>      vm_unmap_aliases+0x167/0x176
>      >                             [<ffffffff8100e58c>]
>      xen_alloc_ptpage+0x51/0x82
>      >                             [<ffffffff8100e5d0>]
>      xen_alloc_pud+0x13/0x15
>      >                           [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>      >                       [<ffffffff8110bf76>]
>      vmap_page_range_noflush+0x9a/0x264
>      >                               [<ffffffff8110c161>]
>      vmap_page_range+0xe/0x10
>      >                             [<ffffffff8110c197>] map_vm_area+0x34/0x47
>      >                         [<ffffffff8110c2cf>]
>      __vmalloc_area_node+0x125/0x14d
>      >                               [<ffffffff8110c379>]
>      __vmalloc_node+0x82/0x91
>      >                             [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>      >                       [<ffffffff819dfef1>]
>      >      alloc_large_system_hash+0x150/0x1fe
>      >       [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>      >       [<ffffffff819c1d99>] start_kernel+0x3de/0x426
>      >       [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2
>      >                 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0   }
>        ...
>      >      key      at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40
>      ...
>      >      acquired at:    [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07
>      >       [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>       [<ffffffff814853bc>]
>      >      _spin_lock+0x36/0x6b    [<ffffffff8110aa20>]
>      >      __purge_vmap_area_lazy+0x54/0x18a    [<ffffffff8110c82f>]
>      >      vm_unmap_aliases+0x167/0x176    [<ffffffff8100d7ca>]
>      >      xen_create_contiguous_region+0x51/0x106    [<ffffffff81250d84>]
>      >      xen_swiotlb_alloc_coherent+0x62/0xa6    [<ffffffff8111188c>]
>      >      dma_pool_alloc+0x136/0x2a8    [<ffffffff81370efe>]
>      >      ehci_qh_alloc+0x44/0x107    [<ffffffff81373f5d>]
>      >      ehci_pci_setup+0x22a/0x9c1    [<ffffffff8135b18e>]
>      >      usb_add_hcd+0x225/0x69d    [<ffffffff8136907b>]
>      >      usb_hcd_pci_probe+0x270/0x3b1    [<ffffffff8125a8ad>]
>      >      local_pci_probe+0x17/0x1b    [<ffffffff8125b4c4>]
>      >      pci_device_probe+0xcb/0xf7    [<ffffffff81307635>]
>      >      driver_probe_device+0xf8/0x218    [<ffffffff813077ae>]
>      >      __driver_attach+0x59/0x7d    [<ffffffff813069e1>]
>      >      bus_for_each_dev+0x54/0x83    [<ffffffff813073fd>]
>      >      driver_attach+0x21/0x23    [<ffffffff81306487>]
>      >      bus_add_driver+0xe1/0x26b    [<ffffffff81307ad5>]
>      >      driver_register+0xa3/0x11a    [<ffffffff8125b71b>]
>      >      __pci_register_driver+0x65/0xc2    [<ff

Attachment: CAPTURE.doc
Description: MS-Word document

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.