[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs()



On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote:
    Attached is the capture log after changing the grub.conf to

    ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset
    initcall_debug debug swiotlb=force apic=debug loglevel=10

    for the dom 0 kernel command  line.

Hmm, interesting. Now it seems to crash in a different place.

Jeremy: Have you seen this one earlier?

No, but it looks like the result of "apic=debug" on the kernel command line. That won't do anything useful (the kernel has no APICs, they all belong to Xen), and can only cause harm. As it appears to have done.

    J

.... IRQ redirection table:
  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
  00 000 0    0    0   0   0    0    0    00
IRQ to pin mappings:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
PGD 0
Oops: 0000 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
RIP: e030:[<ffffffff819bf0e0>]  [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
RSP: e02b:ffff880064edbe20  EFLAGS: 00010286
RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01
RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000
RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000)
Stack:
  ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8
<0>  ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002
<0>  ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332
Call Trace:
  [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
  [<ffffffff810846f0>] ? ktime_get+0x78/0x93
  [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
  [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
  [<ffffffff819ae961>] kernel_init+0x172/0x1cc
  [<ffffffff81013eaa>] child_rip+0xa/0x20
  [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
  [<ffffffff81013810>] ? restore_args+0x0/0x30
  [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
  [<ffffffff81013ea0>] ? child_rip+0x0/0x20
Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31 
ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48>  83 3b 00 74 40 44 89 e6 
48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4
RIP  [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
  RSP<ffff880064edbe20>
CR2: 0000000000000000
---[ end trace 0007ad9d59420718 ]---
swapper used greatest stack depth: 4168 bytes left
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G      D    2.6.32.10 #2
Call Trace:
  [<ffffffff8105b747>] panic+0xa5/0x167
  [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
  [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
  [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1
  [<ffffffff8108f823>] ? lock_release+0x179/0x184
  [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
  [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
  [<ffffffff8105efa7>] do_exit+0x7e/0x701
  [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
  [<ffffffff8147764c>] oops_end+0xbf/0xc7
  [<ffffffff81038a02>] no_context+0x1f1/0x200
  [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
  [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4
  [<ffffffff8100f452>] ? check_events+0x12/0x20
  [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
  [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
  [<ffffffff814769d5>] page_fault+0x25/0x30
  [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
  [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
  [<ffffffff810846f0>] ? ktime_get+0x78/0x93
  [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
  [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
  [<ffffffff819ae961>] kernel_init+0x172/0x1cc
  [<ffffffff81013eaa>] child_rip+0xa/0x20
  [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
  [<ffffffff81013810>] ? restore_args+0x0/0x30
  [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
  [<ffffffff81013ea0>] ? child_rip+0x0/0x20


-- Pasi



    On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@xxxxxx>  wrote:

      On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote:
      >     pvdisplay does not work in my RHEL machine.
      >
      >     I did  pvscan.
      >     below is the output.
      >
      >     PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]
      >
      >     Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ]
      >

      Ok so /dev/sda2 is the correct device holding the VolGroup01.

      Looking at your latest capture.doc I see this:

      Command line: ro root=/dev/vg00/lv01  console=hvc0 earlyprintk=xen
      nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10

      So your root= parameter is wrong! Edit grub.conf and replace it with the
      actual root device:
      root=/dev/VolGroup01/LogVol00

      -- Pasi

      >     On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen
      <[1][2]pasik@xxxxxx>  wrote:
      >
      >       On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote:
      >       >     I did the below steps for pvops dom 0 kernel.
      >       >
      >       >     make menuconfig
      >       >     make bzImage
      >       >     make modules
      >       >     make modules_install
      >       >     cp -a .config /boot/config-2.6.32.10
      >       >     cp -a System.map /boot/System.map-2.6.32.10
      >       >     cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
      >       >     /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img
      >       2.6.32.10
      >       >     I tried root=/dev/VolGroup01/LogVol00 .
      >       >
      >
      >       Ok.
      >
      >       Please run "pvdisplay" to see which actual partition is the LVM
      PV for
      >       your
      >       volume group.
      >
      >       Also if you're running Fedora 12 you could try generating an
      initrd
      >       image
      >       with dracut instead of mkinitrd.
      >
      >       -- Pasi
      >
      >       >
      >       >     On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen
      >       <[1][2][3]pasik@xxxxxx>  wrote:
      >       >
      >       >       On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar
      wrote:
      >       >       >     Here is the output of df -h and cat /etc/fstab of my
      >       machine.
      >       >       >
      >       >
      >       >       Did you try both root=/dev/mapper/VolGroup01-LogVol00 and
      >       >       root=/dev/VolGroup01/LogVol00 arguments for the dom0
      kernel?
      >       >
      >       >       How did you generate the initrd image for the dom0 kernel?
      >       >
      >       >       Anyway this sounds like a grub.conf or initrd problem, not
      Xen or
      >       pvops
      >       >       dom0 kernel kernel problem.
      >       >
      >       >       -- Pasi
      >       >
      >       >       >     Please let me know your thoughts.
      >       >       >
      >       >       >     [root@localhost kishore]# df -h
      >       >       >
      >       >       >     Filesystem Size Used Avail Use% Mounted on
      >       >       >
      >       >       >     /dev/mapper/VolGroup01-LogVol00
      >       >       >
      >       >       >                                         223G 29G 182G 
14%
      /
      >       >       >
      >       >       >     /dev/sda1 99M 81M 13M 87% /boot
      >       >       >
      >       >       >     tmpfs 757M 0 757M 0% /dev/shm
      >       >       >
      >       >       >     [root@localhost kishore]# cat /etc/fstab
      >       >       >
      >       >       >     /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
      >       >       >
      >       >       >     LABEL=/boot /boot ext3 defaults 1 2
      >       >       >
      >       >       >     tmpfs /dev/shm tmpfs defaults 0 0
      >       >       >
      >       >       >     devpts /dev/pts devpts gid=5,mode=620 0 0
      >       >       >
      >       >       >     sysfs /sys sysfs defaults 0 0
      >       >       >
      >       >       >     proc /proc proc defaults 0 0
      >       >       >
      >       >       >     /dev/VolGroup01/LogVol01 swap swap defaults 0 0
      >       >       >
      >       >       >     [root@localhost kishore]#
      >       >       >
      >       >       >     On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen
      >       >       <[1][2][3][4]pasik@xxxxxx>  wrote:
      >       >       >
      >       >       >       On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore
      kumar
      >       wrote:
      >       >       >       >     I am not sure.  Can you please let me know 
how
      to
      >       check
      >       >       this? any
      >       >       >       command
      >       >       >       >     ??
      >       >       >
      >       >       >       well simple "df -h" will show it. and also "cat
      >       /etc/fstab".
      >       >       >       You can also check it from your grub
      configuration.. from
      >       the
      >       >       working
      >       >       >       baremetal (non-Xen) entry.
      >       >       >
      >       >       >       -- Pasi
      >       >       >       >
      >       >       >       >     On Tue, Mar 16, 2010 at 3:29 PM, Pasi
      Kärkkäinen
      >       >       >       <[1][2][3][4][5]pasik@xxxxxx>  wrote:
      >       >       >       >
      >       >       >       >       On Tue, Mar 16, 2010 at 03:22:50PM -0700,
      kishore
      >       kumar
      >       >       wrote:
      >       >       >       >       >     attached  is the log captured in 
with
      the word
      >       >       document .
      >       >       >       >       >
      >       >       >       >
      >       >       >       >       Scanning logical volumes
      >       >       >       >        Reading all physical volumes.  This may
      take a
      >       while...
      >       >       >       >       Activating logical volumes
      >       >       >       >        Volume group "VolGroup01" not found
      >       >       >       >       Trying to resume from
      /dev/VolGroup01/LogVol01
      >       >       >       >       Unable to access resume device
      >       (/dev/VolGroup01/LogVol01)
      >       >       >       >       Creating root device.
      >       >       >       >       Mounting root filesystem.
      >       >       >       >       mount: could not find filesystem 
'/dev/root'
      >       >       >       >       Setting up other filesystems.
      >       >       >       >       Setting up new root fs
      >       >       >       >       setuproot: moving /dev failed: No such 
file
      or
      >       directory
      >       >       >       >       no fstab.sys, mounting internal defaults
      >       >       >       >       setuproot: error mounting /proc: No such
      file or
      >       directory
      >       >       >       >       setuproot: error mounting /sys: No such 
file
      or
      >       directory
      >       >       >       >       Switching to new root and running init.
      >       >       >       >       unmounting old /dev
      >       >       >       >       unmounting old /proc
      >       >       >       >       unmounting old /sys
      >       >       >       >       switchroot: mount failed: No such file or
      directory
      >       >       >       >       init used greatest stack depth: 4088 bytes
      left
      >       >       >       >       Kernel panic - not syncing: Attempted to
      kill init!
      >       >       >       >
      >       >       >       >       So it seems it gets all the way to 
executing
      the
      >       initrd
      >       >       image,
      >       >       >       >       which then fails to mount the root fs.
      >       >       >       >
      >       >       >       >       Earlier in the log:
      >       >       >       >       ata1: SATA link up 3.0 Gbps (SStatus 123
      SControl
      >       300)
      >       >       >       >       ata1.00: ATA-8: Hitachi HDT721025SLA380,
      STBOA3AA,
      >       max
      >       >       UDMA/133
      >       >       >       >       ata1.00: 488397168 sectors, multi 0: LBA48
      NCQ
      >       (depth
      >       >       31/32), AA
      >       >       >       >       ata1.00: configured for UDMA/133
      >       >       >       >       scsi 0:0:0:0: Direct-Access     ATA
       Hitachi
      >       HDT72102
      >       >       STBO
      >       >       >       PQ: 0
      >       >       >       >       ANSI: 5
      >       >       >       >       sd 0:0:0:0: Attached scsi generic sg0 
type 0
      >       >       >       >       sd 0:0:0:0: [sda] 488397168 512-byte 
logical
      >       blocks: (250
      >       >       GB/232
      >       >       >       GiB)
      >       >       >       >       sd 0:0:0:0: [sda] Write Protect is off
      >       >       >       >       sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
      >       >       >       >       sd 0:0:0:0: [sda] Write cache: enabled, 
read
      cache:
      >       >       enabled,
      >       >       >       doesn't
      >       >       >       >       support DPO or FUA
      >       >       >       >        sda: sda1 sda2
      >       >       >       >       sd 0:0:0:0: [sda] Attached SCSI disk
      >       >       >       >
      >       >       >       >       so /dev/sda was detected. Is your root lvm
      volume
      >       on
      >       >       /dev/sda ?
      >       >       >       >       Is /dev/VolGroup01/LogVol01 really your 
root
      fs?
      >       >       >       >
      >       >       >       >       -- Pasi
      >       >       >       >
      >       >       >       >       >
      >       >       >       >       >
      >       >       >       >       >     On Tue, Mar 16, 2010 at 3:03 PM, 
Pasi
      >       Kärkkäinen
      >       >       >       >       <[1][2][3][4][5][6]pasik@xxxxxx>  wrote:
      >       >       >       >       >
      >       >       >       >       >       On Tue, Mar 16, 2010 at 02:56:06PM
      -0700,
      >       kishore
      >       >       kumar
      >       >       >       wrote:
      >       >       >       >       >       >     Please find the attached log
      file after
      >       fixing
      >       >       the
      >       >       >       dom 0
      >       >       >       >       kernel cmd
      >       >       >       >       >       line
      >       >       >       >       >       >     as below
      >       >       >       >       >       >
      >       >       >       >       >       >     ro 
root=/dev/VolGroup01/LogVol00
      >       console=hvc0
      >       >       >       >       earlyprintk=xen
      >       >       >       >       >       nomodeset
      >       >       >       >       >       >
      >       >       >       >       >
      >       >       >       >       >       There's something wrong with the 
log,
      the
      >       dom0
      >       >       kernel
      >       >       >       parts are
      >       >       >       >       all on
      >       >       >       >       >       one line..
      >       >       >       >       >       It's really difficult to read it.
      >       >       >       >       >
      >       >       >       >       >       -- Pasi
      >       >       >       >       >
      >       >       >       >       >       >     Thanks
      >       >       >       >       >       >
      >       >       >       >       >       >
      >       >       >       >       >       >     On Tue, Mar 16, 2010 at 
2:29 PM,
      Pasi
      >       >       Kärkkäinen
      >       >       >       >       >       
<[1][2][3][4][5][6][7]pasik@xxxxxx>
      wrote:
      >       >       >       >       >       >
      >       >       >       >       >       >       On Tue, Mar 16, 2010 at
      02:16:22PM
      >       -0700,
      >       >       kishore
      >       >       >       kumar
      >       >       >       >       wrote:
      >       >       >       >       >       >       >     I did below steps.
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >      I pulled DOM 0 
kernel
      from
      >       >       >       >       >       >       >     git clone
      >       >       >       >       >       >
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
      
git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >       >       >       >       >       >     linux-2.6-xen
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     cd linux-2.6-xen
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     make clean
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     cp -a .config 
.config-old
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     wget -O .config
      >       >       >       >       >       >       >
      >       >       >       >       >       >
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
       
[2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     make oldconfig
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     make bzImage
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     make modules
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     make modules_install
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     cp -a .config
      >       /boot/config-2.6.32.9
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     cp -a System.map
      >       >       /boot/System.map-2.6.32.9
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     cp -a
      arch/x86/boot/bzImage
      >       >       >       /boot/vmlinuz-2.6.32.9
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     and modified the
      grub.conf as
      >       below
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     Root(hd0,0)
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >      kernel /xen.gz
      console=vga,com1
      >       >       >       com1=115200,8n1
      >       >       >       >       msi=1
      >       >       >       >       >       iommu=1
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >      module 
/vmlinuz-2.6.32.9
      ro
      >       >       >       >       root=/dev/VolGroup01/LogVo100
      >       >       >       >       >        rhgb
      >       >       >       >       >       >       quiet
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >      module
      /initrd-2.6.32.9.img
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     and rebooted the 
machine.
       Then
      >       It
      >       >       booted with
      >       >       >       some
      >       >       >       >       xen
      >       >       >       >       >       messages
      >       >       >       >       >       >       and
      >       >       >       >       >       >       >     stopped.  Those 
were the
      >       messages
      >       >       captured
      >       >       >       from
      >       >       >       >       serial
      >       >       >       >       >       console.
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     Please let me know 
if I
      did
      >       something
      >       >       wrong
      >       >       >       here.
      >       >       >       >       >       >       >
      >       >       >       >       >       >
      >       >       >       >       >       >       Please fix the kernel 
cmdline
      based
      >       on my
      >       >       earlier
      >       >       >       email,
      >       >       >       >       and
      >       >       >       >       >       capture and
      >       >       >       >       >       >       post the
      >       >       >       >       >       >       serial console log again!
      >       >       >       >       >       >
      >       >       >       >       >       >       -- Pasi
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     On Tue, Mar 16, 
2010 at
      1:20 PM,
      >       Pasi
      >       >       >       Kärkkäinen
      >       >       >       >       >       >
       <[3][4][5][6][7][8][9][10]pasik@xxxxxx>
      >       wrote:
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >       On Tue, Mar 16, 
2010 at
      >       01:16:28PM
      >       >       -0700,
      >       >       >       Jeremy
      >       >       >       >       >       Fitzhardinge
      >       >       >       >       >       >       wrote:
      >       >       >       >       >       >       >       >  On 03/16/2010 
12:48
      PM, Pasi
      >       >       Kärkkäinen
      >       >       >       wrote:
      >       >       >       >       >       >       >       >>  On Tue, Mar 
16, 2010
      at
      >       09:43:44PM
      >       >       +0200,
      >       >       >       Pasi
      >       >       >       >       >       Kärkkäinen
      >       >       >       >       >       >       wrote:
      >       >       >       >       >       >       >       >>
      >       >       >       >       >       >       >       >>>  On Tue, Mar 
16,
      2010 at
      >       >       10:32:17AM
      >       >       >       -0700,
      >       >       >       >       kishore
      >       >       >       >       >       kumar
      >       >       >       >       >       >       wrote:
      >       >       >       >       >       >       >       >>>
      >       >       >       >       >       >       >       >>>>      
Attached is
      the
      >       output
      >       >       captured
      >       >       >       from
      >       >       >       >       serial
      >       >       >       >       >       console.
      >       >       >       >       >       >       >       >>>>
      >       >       >       >       >       >       >       >>>>      Machine 
does
      not boot
      >       after
      >       >       >       compiling xen
      >       >       >       >       3.4.3
      >       >       >       >       >       with
      >       >       >       >       >       >       pv_ops dom
      >       >       >       >       >       >       >       0 kernel.
      >       >       >       >       >       >       >       >>>>
      >       >       >       >       >       >       >       >>>>      Please 
let me
      know
      >       what is
      >       >       going
      >       >       >       wrong
      >       >       >       >       here.
      >       >       >       >       >       >       >       >>>>
      >       >       >       >       >       >       >       >>>>
      >       >       >       >       >       >       >       >>>  Ok this 
looks like
      a bug
      >       that is
      >       >       already
      >       >       >       being
      >       >       >       >       sorted
      >       >       >       >       >       out on
      >       >       >       >       >       >       >       xen-devel 
mailinglist.
      >       >       >       >       >       >       >       >>>  I added CC to
      xen-devel.
      >       >       >       >       >       >       >       >>>
      >       >       >       >       >       >       >       >>>
      >       >       >       >       >       >       >       >>
      >       >       >       >       >       >       >       >
      >       >       >       >       >       >       >       >  Those messages 
are
      not a
      >       problem in
      >       >       >       themselves,
      >       >       >       >       but the
      >       >       >       >       >       related
      >       >       >       >       >       >       >       problem
      >       >       >       >       >       >       >       >  is believed to 
be
      fixed in
      >       current
      >       >       >       >       xen/stable-2.6.32.x.
      >       >       >       >       >        It
      >       >       >       >       >       >       looks like
      >       >       >       >       >       >       >       >  the output 
stops
      there
      >       because the
      >       >       Xen
      >       >       >       console
      >       >       >       >       isn't set
      >       >       >       >       >       up
      >       >       >       >       >       >       properly
      >       >       >       >       >       >       >       for
      >       >       >       >       >       >       >       >  some reason.
      >       >       >       >       >       >       >       >
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >       Yeah, remove "rhgb
      quiet" from
      >       the
      >       >       options..
      >       >       >       the
      >       >       >       >       dom0
      >       >       >       >       >       kernel
      >       >       >       >       >       >       cmdline
      >       >       >       >       >       >       >       should be like 
this:
      >       >       >       >       >       >       >       ro
      >       root=/dev/VolGroup01/LogVol00
      >       >       >       console=hvc0
      >       >       >       >       >       earlyprintk=xen
      >       >       >       >       >       >       nomodeset
      >       >       >       >       >       >       >       -- Pasi
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >  References
      >       >       >       >       >       >       >
      >       >       >       >       >       >       >     Visible links
      >       >       >       >       >       >       >     1.
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
       
[5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >       >       >       >       >       >     2.
      >       >       >       >       >       >
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
      
[6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >       >       >       >       >       >     3.
      >       mailto:[7][8][9][10][11][12][13]pasik@xxxxxx
      >       >       >       >       >       >
      >       >       >       >       >       >  References
      >       >       >       >       >       >
      >       >       >       >       >       >     Visible links
      >       >       >       >       >       >     1.
      >       mailto:[9][10][11][12][13][14]pasik@xxxxxx
      >       >       >       >       >       >     2.
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
       
[10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >       >       >       >       >     3.
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
       
[11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >       >       >       >       >     4.
      >       mailto:[12][13][14][15][16][17]pasik@xxxxxx
      >       >       >       >       >       >     5.
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
       
[13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >       >       >       >       >     6.
      >       >       >       >       >
      >       >       >       >
      >       >       >
      >       >
      >
       
[14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >       >       >       >       >     7.
      >       mailto:[15][16][17][18][19][20]pasik@xxxxxx
      >       >       >       >       >       >  Asserting Post complete GPIO!!!
      >       >       >       >       >       >  Transfer control to CSM 16-bit
      binary for
      >       legacy
      >       >       boot
      >       >       >       >       >       >   __  __            _____ _  _
       _____
      >       >         _  _
      >       >       >       >       >       >   \ \/ /___ _ __   |___ /| || |
       |___ /
      >        _ __
      >       >       ___| || |
      >       >       >           _
      >       >       >       >       __  _
      >       >       >       >       >       __ ___
      >       >       >       >       >       >    \  // _ \ '_ \    |_ \| || |_
      |_ \ __|
      >       '__/
      >       >       __| ||
      >       >       >       |_ __|
      >       >       >       >       '_ \|
      >       >       >       >       >       '__/ _ \
      >       >       >       >       >       >    /  \  __/ | | |  ___) |__   
_|
      ___) |__|
      >       | |
      >       >       (__|__
      >       >       >       _|__|
      >       >       >       >       |_) | |
      >       >       >       >       >       |  __/
      >       >       >       >       >       >   /_/\_\___|_| |_| |____(_)
      |_|(_)____/
      >       |_|
      >       >        \___|  |_|
      >       >       >          |
      >       >       >       >       .__/|_|
      >       >       >       >       >        \___|
      >       >       >       >       >       >
      >       >       >           |_|
      >       >       >       >       >       >  (XEN) Xen version 3.4.3-rc4-pre
      >       >       (kishore@localdomain)
      >       >       >       (gcc
      >       >       >       >       version
      >       >       >       >       >       4.1.2 20080704 (Red Hat 4.1.2-46))
      Mon Mar
      >       15
      >       >       13:44:31 PDT
      >       >       >       2010
      >       >       >       >       >       >  (XEN) Latest ChangeSet: Tue 
Mar 09
      >       18:15:52 2010
      >       >       +0000
      >       >       >       >       >       19924:6e72f8c3c017
      >       >       >       >       >       >  (XEN) Command line:
      console=vga,com1
      >       >       com1=115200,8n1
      >       >       >       msi=1
      >       >       >       >       iommu=1
      >       >       >       >       >       >  (XEN) Video information:
      >       >       >       >       >       >  (XEN)  VGA is text mode 80x25, 
font
      8x16
      >       >       >       >       >       >  (XEN)  VBE/DDC methods: none; 
EDID
      >       transfer time:
      >       >       0
      >       >       >       seconds
      >       >       >       >       >       >  (XEN)  EDID info not retrieved
      because no
      >       DDC
      >       >       retrieval
      >       >       >       method
      >       >       >       >       >       detected
      >       >       >       >       >       >  (XEN) Disc information:
      >       >       >       >       >       >  (XEN)  Found 1 MBR signatures
      >       >       >       >       >       >  (XEN)  Found 1 EDD information
      structures
      >       >       >       >       >       >  (XEN) Xen-e820 RAM map:
      >       >       >       >       >       >  (XEN)  0000000000000000 -
      000000000009d000
      >       >       (usable)
      >       >       >       >       >       >  (XEN)  000000000009d000 -
      00000000000a0000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  00000000000e0000 -
      0000000000100000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  0000000000100000 -
      000000006d597000
      >       >       (usable)
      >       >       >       >       >       >  (XEN)  000000006d597000 -
      000000006d686000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  000000006d686000 -
      000000006f598000
      >       >       (usable)
      >       >       >       >       >       >  (XEN)  000000006f598000 -
      000000006f59a000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  000000006f59a000 -
      000000006f5af000
      >       (ACPI
      >       >       NVS)
      >       >       >       >       >       >  (XEN)  000000006f5af000 -
      000000006f5d9000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  000000006f5d9000 -
      000000006f5f9000
      >       (ACPI
      >       >       data)
      >       >       >       >       >       >  (XEN)  000000006f5f9000 -
      000000006f6df000
      >       (ACPI
      >       >       NVS)
      >       >       >       >       >       >  (XEN)  000000006f6df000 -
      000000006f700000
      >       (ACPI
      >       >       data)
      >       >       >       >       >       >  (XEN)  000000006f700000 -
      0000000080000000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  00000000a0000000 -
      00000000b0000000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  00000000fc000000 -
      00000000fd000000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  00000000fed1c000 -
      00000000fed20000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN)  00000000ffc00000 -
      0000000100000000
      >       >       (reserved)
      >       >       >       >       >       >  (XEN) System RAM: 1780MB
      (1823000kB)
      >       >       >       >       >       >  (XEN) ACPI: RSDP 000F03F0, 
0024 (r2
      INTEL
      >       )
      >       >       >       >       >       >  (XEN) ACPI: XSDT 6F6FE120, 
0064 (r1
      INTEL
      >        THRLY
      >       >       >         0
      >       >       >       >       >       1000013)
      >       >       >       >       >       >  (XEN) ACPI: FACP 6F6FD000, 
00F4 (r4
      INTEL
      >        THRLY
      >       >       >         0
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: DSDT 6F6F5000, 
74F1 (r2
      INTEL
      >        THRLY
      >       >       >         3
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: FACS 6F5F9000, 0040
      >       >       >       >       >       >  (XEN) ACPI: APIC 6F6F4000, 
01CC (r2
      INTEL
      >        THRLY
      >       >       >         0
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: MCFG 6F6F3000, 
003C (r1
      INTEL
      >        THRLY
      >       >       >         1
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: HPET 6F6F2000, 
0038 (r1
      INTEL
      >        THRLY
      >       >       >         1
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: SLIT 6F6F1000, 
0030 (r1
      INTEL
      >        THRLY
      >       >       >         1
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: WDDT 6F6F0000, 
0040 (r1
      INTEL
      >        THRLY
      >       >       >         0
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) ACPI: SSDT 6F5D9000, 
1FDDC
      (r1
      >        INTEL SSDT
      >       >        PM
      >       >       >       4000
      >       >       >       >       INTL
      >       >       >       >       >       20061109)
      >       >       >       >       >       >  (XEN) ACPI: DMAR 6F6EE000, 
01D0 (r1
      INTEL
      >        THRLY
      >       >       >         1
      >       >       >       >       MSFT
      >       >       >       >       >        100000D)
      >       >       >       >       >       >  (XEN) Domain heap initialised
      >       >       >       >       >       >  (XEN) Processor #0 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #2 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #4 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #16 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #18 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #20 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #1 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #3 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #5 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #17 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #19 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) Processor #21 6:12 APIC
      version 21
      >       >       >       >       >       >  (XEN) IOAPIC[0]: apic_id 8, 
version
      32,
      >       address
      >       >       >       0xfec00000, GSI
      >       >       >       >       0-23
      >       >       >       >       >       >  (XEN) IOAPIC[1]: apic_id 9, 
version
      32,
      >       address
      >       >       >       0xfec90000, GSI
      >       >       >       >       24-47
      >       >       >       >       >       >  (XEN) Enabling APIC mode:  
Phys.
       Using 2
      >       I/O
      >       >       APICs
      >       >       >       >       >       >  (XEN) Intel VT-d DMAR tables 
have
      been
      >       parsed.
      >       >       >       >       >       >  (XEN) Using scheduler: SMP 
Credit
      >       Scheduler
      >       >       (credit)
      >       >       >       >       >       >  (XEN) Detected 3200.207 MHz
      processor.
      >       >       >       >       >       >  (XEN) VMX: Supported advanced
      features:
      >       >       >       >       >       >  (XEN)  - APIC MMIO access
      virtualisation
      >       >       >       >       >       >  (XEN)  - APIC TPR shadow
      >       >       >       >       >       >  (XEN)  - Extended Page Tables 
(EPT)
      >       >       >       >       >       >  (XEN)  - Virtual-Processor
      Identifiers
      >       (VPID)
      >       >       >       >       >       >  (XEN)  - Virtual NMI
      >       >       >       >       >       >  (XEN)  - MSR direct-access 
bitmap
      >       >       >       >       >       >  (XEN) VMX: EPT is available.
      >       >       >       >       >       >  (XEN) VMX: VPID is available.
      >       >       >       >       >       >  (XEN) HVM: VMX enabled
      >       >       >       >       >       >  (XEN) HVM: Hardware Assisted 
Paging
      >       detected.
      >       >       >       >       >       >  (XEN) CPU0: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 1/2 eip
      88000
      >       >       >       >       >       >  (XEN) CPU1: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 2/4 eip
      88000
      >       >       >       >       >       >  (XEN) CPU2: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 3/16 
eip
      88000
      >       >       >       >       >       >  (XEN) CPU3: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 4/18 
eip
      88000
      >       >       >       >       >       >  (XEN) CPU4: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 5/20 
eip
      88000
      >       >       >       >       >       >  (XEN) CPU5: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 6/1 eip
      88000
      >       >       >       >       >       >  (XEN) CPU6: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 7/3 eip
      88000
      >       >       >       >       >       >  (XEN) CPU7: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 8/5 eip
      88000
      >       >       >       >       >       >  (XEN) CPU8: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 9/17 
eip
      88000
      >       >       >       >       >       >  (XEN) CPU9: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 10/19 
eip
      88000
      >       >       >       >       >       >  (XEN) CPU10: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Booting processor 11/21 
eip
      88000
      >       >       >       >       >       >  (XEN) CPU11: Intel Genuine 
Intel(R)
      CPU
      >       >         000
      >       >       >        @
      >       >       >       >       3.20GHz
      >       >       >       >       >       stepping 00
      >       >       >       >       >       >  (XEN) Total of 12 processors
      activated.
      >       >       >       >       >       >  (XEN) ENABLING IO-APIC IRQs
      >       >       >       >       >       >  (XEN)  ->  Using new ACK method
      >       >       >       >       >       >  (XEN) checking TSC 
synchronization
      across
      >       12
      >       >       CPUs:
      >       >       >       passed.
      >       >       >       >       >       >  (XEN) Platform timer is 
14.318MHz
      HPET
      >       >       >       >       >       >  ?(XEN) Brought up 12 CPUs
      >       >       >       >       >       >  (XEN) Intel VT-d Snoop Control
      supported.
      >       >       >       >       >       >  (XEN) Intel VT-d DMA 
Passthrough
      not
      >       supported.
      >       >       >       >       >       >  (XEN) Intel VT-d Queued
      Invalidation
      >       supported.
      >       >       >       >       >       >  (XEN) Intel VT-d Interrupt
      Remapping
      >       supported.
      >       >       >       >       >       >  (XEN) I/O virtualisation 
enabled
      >       >       >       >       >       >  (XEN) I/O virtualisation for PV
      guests
      >       disabled
      >       >       >       >       >       >  (XEN) xenoprof: Initialization
      failed.
      >       Intel
      >       >       processor
      >       >       >       model 44
      >       >       >       >       for P6
      >       >       >       >       >       class family is not supported
      >       >       >       >       >       >  (XEN) *** LOADING DOMAIN 0 ***
      >       >       >       >       >       >  (XEN)  Xen  kernel: 64-bit, 
lsb,
      compat32
      >       >       >       >       >       >  (XEN)  Dom0 kernel: 64-bit, 
PAE,
      lsb,
      >       paddr
      >       >       0x1000000 ->
      >       >       >       >       0x26bb000
      >       >       >       >       >       >  (XEN) PHYSICAL MEMORY 
ARRANGEMENT:
      >       >       >       >       >       >  (XEN)  Dom0 alloc.:
      >       >       0000000064000000->0000000068000000
      >       >       >       >       (404490 pages
      >       >       >       >       >       to be allocated)
      >       >       >       >       >       >  (XEN) VIRTUAL MEMORY 
ARRANGEMENT:
      >       >       >       >       >       >  (XEN)  Loaded kernel:
      >       >       ffffffff81000000->ffffffff826bb000
      >       >       >       >       >       >  (XEN)  Init. ramdisk:
      >       >       ffffffff826bb000->ffffffff82d0d800
      >       >       >       >       >       >  (XEN)  Phys-Mach map:
      >       >       ffffffff82d0e000->ffffffff83044050
      >       >       >       >       >       >  (XEN)  Start info:
      >       >        ffffffff83045000->ffffffff830454b4
      >       >       >       >       >       >  (XEN)  Page tables:
      >       >       ffffffff83046000->ffffffff83063000
      >       >       >       >       >       >  (XEN)  Boot stack:
      >       >        ffffffff83063000->ffffffff83064000
      >       >       >       >       >       >  (XEN)  TOTAL:
      >       >       ffffffff80000000->ffffffff83400000
      >       >       >       >       >       >  (XEN)  ENTRY ADDRESS:
      ffffffff819c1200
      >       >       >       >       >       >  (XEN) Dom0 has maximum 12 VCPUs
      >       >       >       >       >       >  (XEN) Scrubbing Free RAM: 
.done.
      >       >       >       >       >       >  (XEN) Xen trace buffers: 
disabled
      >       >       >       >       >       >  (XEN) Std. Loglevel: Errors and
      warnings
      >       >       >       >       >       >  (XEN) Guest Loglevel: Nothing
      >       (Rate-limited:
      >       >       Errors and
      >       >       >       >       warnings)
      >       >       >       >       >       >  (XEN) Xen is relinquishing VGA
      console.
      >       >       >       >       >       >  (XEN) *** Serial input ->  DOM0
      (type
      >       'CTRL-a'
      >       >       three
      >       >       >       times to
      >       >       >       >       switch
      >       >       >       >       >       input to Xen)
      >       >       >       >       >       >  (XEN) Freed 128kB init memory.
      >       >       >       >       >       >  mapping kernel into physical 
memory
      >       >       >       >       >       >  Xen: setup ISA identity maps
      >       >       >       >       >       >  about to get started...
      >       >       >       >       >       >  Initializing cgroup subsys 
cpuset
      >       >       >       >       >       >  Initializing cgroup subsys cpu
      >       >       >       >       >       >  Linux version 2.6.32.9
      >       >       (kishore@xxxxxxxxxxxxxxxxxxxxx)
      >       >       >       (gcc
      >       >       >       >       version
      >       >       >       >       >       4.1.2 20080704 (Red Hat 
4.1.2-46)) #1
      SMP
      >       Mon Mar
      >       >       15
      >       >       >       15:16:28 PDT
      >       >       >       >       2010
      >       >       >       >       >       >  Command line: ro
      >       root=/dev/VolGroup01/LogVol00
      >       >       >       console=hvc0
      >       >       >       >       >       earlyprintk=xen nomodeset
      >       >       >       >       >       >  KERNEL supported cpus:
      >       >       >       >       >       >    Intel GenuineIntel
      >       >       >       >       >       >    AMD AuthenticAMD
      >       >       >       >       >       >    Centaur CentaurHauls
      >       >       >       >       >       >  BIOS-provided physical RAM map:
      >       >       >       >       >       >   Xen: 0000000000000000 -
      000000000009d000
      >       >       (usable)
      >       >       >       >       >       >   Xen: 000000000009d000 -
      0000000000100000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 0000000000100000 -
      0000000066c0a000
      >       >       (usable)
      >       >       >       >       >       >   Xen: 000000006d597000 -
      000000006d686000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 000000006f598000 -
      000000006f59a000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 000000006f59a000 -
      000000006f5af000
      >       (ACPI
      >       >       NVS)
      >       >       >       >       >       >   Xen: 000000006f5af000 -
      000000006f5d9000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 000000006f5d9000 -
      000000006f5f9000
      >       (ACPI
      >       >       data)
      >       >       >       >       >       >   Xen: 000000006f5f9000 -
      000000006f6df000
      >       (ACPI
      >       >       NVS)
      >       >       >       >       >       >   Xen: 000000006f6df000 -
      000000006f700000
      >       (ACPI
      >       >       data)
      >       >       >       >       >       >   Xen: 000000006f700000 -
      0000000080000000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 00000000a0000000 -
      00000000b0000000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 00000000fc000000 -
      00000000fd000000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 00000000fed1c000 -
      00000000fed20000
      >       >       (reserved)
      >       >       >       >       >       >   Xen: 00000000ffc00000 -
      0000000100000000
      >       >       (reserved)
      >       >       >       >       >       >  bootconsole [xenboot0] enabled
      >       >       >       >       >       >  DMI 2.4 present.
      >       >       >       >       >       >  last_pfn = 0x66c0a 
max_arch_pfn =
      >       0x400000000
      >       >       >       >       >       >  init_memory_mapping:
      >       >       0000000000000000-0000000066c0a000
      >       >       >       >       >       >  RAMDISK: 026bb000 - 02d0d800
      >       >       >       >       >       >  ACPI: RSDP 00000000000f03f0 
00024
      (v02
      >       INTEL )
      >       >       >       >       >       >  ACPI: XSDT 000000006f6fe120 
00064
      (v01
      >       INTEL
      >       >        THRLY
      >       >       >        00000000
      >       >       >       >       >        01000013)
      >       >       >       >       >       >  ACPI: FACP 000000006f6fd000 
000F4
      (v04
      >       INTEL
      >       >        THRLY
      >       >       >        00000000
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: DSDT 000000006f6f5000 
074F1
      (v02
      >       INTEL
      >       >        THRLY
      >       >       >        00000003
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: FACS 000000006f5f9000 
00040
      >       >       >       >       >       >  ACPI: APIC 000000006f6f4000 
001CC
      (v02
      >       INTEL
      >       >        THRLY
      >       >       >        00000000
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: MCFG 000000006f6f3000 
0003C
      (v01
      >       INTEL
      >       >        THRLY
      >       >       >        00000001
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: HPET 000000006f6f2000 
00038
      (v01
      >       INTEL
      >       >        THRLY
      >       >       >        00000001
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: SLIT 000000006f6f1000 
00030
      (v01
      >       INTEL
      >       >        THRLY
      >       >       >        00000001
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: WDDT 000000006f6f0000 
00040
      (v01
      >       INTEL
      >       >        THRLY
      >       >       >        00000000
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  ACPI: SSDT 000000006f5d9000 
1FDDC
      (v01
      >        INTEL
      >       >       SSDT  PM
      >       >       >       00004000
      >       >       >       >       INTL
      >       >       >       >       >       20061109)
      >       >       >       >       >       >  ACPI:      000000006f6ee000 
001D0
      (v01
      >       INTEL
      >       >        THRLY
      >       >       >        00000001
      >       >       >       >       MSFT
      >       >       >       >       >       0100000D)
      >       >       >       >       >       >  No NUMA configuration found
      >       >       >       >       >       >  Faking a node at
      >       >       0000000000000000-0000000066c0a000
      >       >       >       >       >       >  Bootmem setup node 0
      >       >       0000000000000000-0000000066c0a000
      >       >       >       >       >       >    NODE_DATA [0000000000008000 -
      >       000000000001ffff]
      >       >       >       >       >       >    bootmap [0000000000020000 -
      >        000000000002cd87]
      >       >       pages d
      >       >       >       >       >       >  (9 early reservations) ==>  
bootmem
      >       [0000000000 -
      >       >       >       0066c0a000]
      >       >       >       >       >       >    #0 [0000000000 - 0000001000]
      BIOS data
      >       page
      >       >       ==>
      >       >       >       [0000000000
      >       >       >       >       -
      >       >       >       >       >       0000001000]
      >       >       >       >       >       >    #1 [0003046000 - 0003063000]
      XEN
      >       PAGETABLES
      >       >       ==>
      >       >       >       [0003046000
      >       >       >       >       -
      >       >       >       >       >       0003063000]
      >       >       >       >       >       >    #2 [0000006000 - 0000008000]
      >       TRAMPOLINE
      >       >       ==>
      >       >       >       [0000006000
      >       >       >       >       -
      >       >       >       >       >       0000008000]
      >       >       >       >       >       >    #3 [0001000000 - 000269ae98]
       TEXT
      >       DATA BSS
      >       >       ==>
      >       >       >       [0001000000
      >       >       >       >       -
      >       >       >       >       >       000269ae98]
      >       >       >       >       >       >    #4 [00026bb000 - 0002d0d800]
      >        RAMDISK
      >       >       ==>
      >       >       >       [00026bb000
      >       >       >       >       -
      >       >       >       >       >       0002d0d800]
      >       >       >       >       >       >    #5 [0002d0e000 - 0003046000]
      XEN START
      >       INFO
      >       >       ==>
      >       >       >       [0002d0e000
      >       >       >       >       -
      >       >       >       >       >       0003046000]
      >       >       >       >       >       >    #6 [000269b000 - 000269b011]
      >        BRK
      >       >       ==>
      >       >       >       [000269b000
      >       >       >       >       -
      >       >       >       >       >       000269b011]
      >       >       >       >       >       >    #7 [0000100000 - 000041a000]
      >        PGTABLE
      >       >       ==>
      >       >       >       [0000100000
      >       >       >       >       -
      >       >       >       >       >       000041a000]
      >       >       >       >       >       >    #8 [0000001000 - 0000001030]
         ACPI
      >       SLIT
      >       >       ==>
      >       >       >       [0000001000
      >       >       >       >       -
      >       >       >       >       >       0000001030]
      >       >       >       >       >       >  found SMP MP-table at
      [ffff8800000fd750]
      >       fd750
      >       >       >       >       >       >  Zone PFN ranges:
      >       >       >       >       >       >    DMA      0x00000000 ->  
0x00001000
      >       >       >       >       >       >    DMA32    0x00001000 ->  
0x00100000
      >       >       >       >       >       >    Normal   0x00100000 ->  
0x00100000
      >       >       >       >       >       >  Movable zone start PFN for each
      node
      >       >       >       >       >       >  early_node_map[2] active PFN 
ranges
      >       >       >       >       >       >      0: 0x00000000 ->  
0x0000009d
      >       >       >       >       >       >      0: 0x00000100 ->  
0x00066c0a
      >       >       >       >       >       >  ACPI: PM-Timer IO Port: 0x408
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x00]
      lapic_id[0x00]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x01]
      lapic_id[0x02]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x02]
      lapic_id[0x04]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x03]
      lapic_id[0x10]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x04]
      lapic_id[0x12]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x05]
      lapic_id[0x14]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x06]
      lapic_id[0x01]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x07]
      lapic_id[0x03]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x08]
      lapic_id[0x05]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x09]
      lapic_id[0x11]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0a]
      lapic_id[0x13]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0b]
      lapic_id[0x15]
      >       >       enabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0c]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0d]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0e]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0f]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x10]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x11]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x12]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x13]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x14]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x15]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x16]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x17]
      lapic_id[0xff]
      >       >       disabled)
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x00] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x01] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x02] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x03] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x04] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x05] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x06] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x07] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x08] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x09] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x0a] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x0b] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x0c] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x0d] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x0e] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x0f] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x10] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x11] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x12] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x13] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x14] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x15] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x16] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: LAPIC_NMI (acpi_id[0x17] 
high
      level
      >       >       lint[0x1])
      >       >       >       >       >       >  ACPI: IOAPIC (id[0x08]
      address[0xfec00000]
      >       >       gsi_base[0])
      >       >       >       >       >       >  IOAPIC[0]: apic_id 8, version 
0,
      address
      >       >       0xfec00000, GSI
      >       >       >       0-0
      >       >       >       >       >       >  ACPI: IOAPIC (id[0x09]
      address[0xfec90000]
      >       >       gsi_base[24])
      >       >       >       >       >       >  IOAPIC[1]: apic_id 9, version 
0,
      address
      >       >       0xfec90000, GSI
      >       >       >       24-24
      >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
bus_irq 0
      >       global_irq 2
      >       >       dfl dfl)
      >       >       >       >       >       >  ERROR: Unable to locate IOAPIC 
for
      GSI 2
      >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
bus_irq 9
      >       global_irq 9
      >       >       high
      >       >       >       level)
      >       >       >       >       >       >  ERROR: Unable to locate IOAPIC 
for
      GSI 9
      >       >       >       >       >       >  Using ACPI (MADT) for SMP
      configuration
      >       >       information
      >       >       >       >       >       >  ACPI: HPET id: 0x8086a401 base:
      0xfed00000
      >       >       >       >       >       >  SMP: Allowing 12 CPUs, 0 
hotplug
      CPUs
      >       >       >       >       >       >  PM: Registered nosave memory:
      >       000000000009d000 -
      >       >       >       >       0000000000100000
      >       >       >       >       >       >  Allocating PCI resources 
starting
      at
      >       b0000000
      >       >       (gap:
      >       >       >       >       b0000000:4c000000)
      >       >       >       >       >       >  Booting paravirtualized kernel 
on
      Xen
      >       >       >       >       >       >  Xen version: 3.4.3-rc4-pre
      (preserve-AD)
      >       (dom0)
      >       >       >       >       >       >  NR_CPUS:512 nr_cpumask_bits:512
      >       nr_cpu_ids:12
      >       >       >       nr_node_ids:1
      >       >       >       >       >       >  PERCPU: Embedded 478 pages/cpu
      >       @ffff880005ebc000
      >       >       >       s1928024 r8192
      >       >       >       >       d21672
      >       >       >       >       >       u1957888
      >       >       >       >       >       >  pcpu-alloc: s1928024 r8192 
d21672
      u1957888
      >       >       >       alloc=478*4096
      >       >       >       >       >       >  pcpu-alloc: [0] 00 [0] 01 [0] 
02
      [0] 03
      >       [0] 04
      >       >       [0] 05
      >       >       >       [0] 06
      >       >       >       >       [0] 07
      >       >       >       >       >       >  pcpu-alloc: [0] 08 [0] 09 [0] 
10
      [0] 11
      >       >       >       >       >       >  Xen: using vcpu_info placement
      >       >       >       >       >       >  Built 1 zonelists in Node 
order,
      mobility
      >       >       grouping on.
      >       >       >        Total
      >       >       >       >       pages:
      >       >       >       >       >       409291
      >       >       >       >       >       >  Policy zone: DMA32
      >       >       >       >       >       >  Kernel command line: ro
      >       >       root=/dev/VolGroup01/LogVol00
      >       >       >       >       console=hvc0
      >       >       >       >       >       earlyprintk=xen nomodeset
      >       >       >       >       >       >  PID hash table entries: 4096
      (order: 3,
      >       32768
      >       >       bytes)
      >       >       >       >       >       >  Initializing CPU#0
      >       >       >       >       >       >  DMA: Placing 64MB software IO 
TLB
      between
      >       >       >       ffff880007525000 -
      >       >       >       >       >       ffff88000b525000
      >       >       >       >       >       >  DMA: software IO TLB at phys
      0x7525000 -
      >       >       0xb525000
      >       >       >       >       >       >  xen_swiotlb_fixup:
      buf=ffff880007525000
      >       >       size=67108864
      >       >       >       >       >       >  xen_swiotlb_fixup:
      buf=ffff88000b585000
      >       >       size=32768
      >       >       >       >       >       >  Memory: 1514268k/1683496k 
available
      (4654k
      >       kernel
      >       >       code,
      >       >       >       396k
      >       >       >       >       absent,
      >       >       >       >       >       168832k reserved, 3443k data, 
3396k
      init)
      >       >       >       >       >       >  SLUB: Genslabs=14, HWalign=64,
      Order=0-3,
      >       >       MinObjects=0,
      >       >       >       >       CPUs=12,
      >       >       >       >       >       Nodes=1
      >       >       >       >       >       >  Hierarchical RCU 
implementation.
      >       >       >       >       >       >  NR_IRQS:4352 nr_irqs:3072
      >       >       >       >       >       >  Already setup the GSI :0
      >       >       >       >       >       >  Already setup the GSI :1
      >       >       >       >       >       >  Already setup the GSI :2
      >       >       >       >       >       >  Already setup the GSI :3
      >       >       >       >       >       >  Already setup the GSI :4
      >       >       >       >       >       >  Already setup the GSI :5
      >       >       >       >       >       >  Already setup the GSI :6
      >       >       >       >       >       >  Already setup the GSI :7
      >       >       >       >       >       >  Already setup the GSI :8
      >       >       >       >       >       >  Already setup the GSI :9
      >       >       >       >       >       >  Already setup the GSI :10
      >       >       >       >       >       >  Already setup the GSI :11
      >       >       >       >       >       >  Already setup the GSI :12
      >       >       >       >       >       >  Already setup the GSI :13
      >       >       >       >       >       >  Already setup the GSI :14
      >       >       >       >       >       >  Already setup the GSI :15
      >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
bus_irq 0
      >       global_irq 2
      >       >       dfl dfl)
      >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
bus_irq 9
      >       global_irq 9
      >       >       high
      >       >       >       level)
      >       >       >       >       >       >  xen: sci override: source_irq=9
      >       global_irq=9
      >       >       trigger=c
      >       >       >       >       polarity=1
      >       >       >       >       >       >  xen_allocate_pirq: returning 
irq 9
      for gsi
      >       9
      >       >       >       >       >       >  Already setup the GSI :9
      >       >       >       >       >       >  xen: acpi sci 9
      >       >       >       >       >       >  Console: colour VGA+ 80x25
      >       >       >       >       >       >  console [hvc0] enabled, 
bootconsole
      >       disabled
      >       >       console
      >       >       >       [hvc0]
      >       >       >       >       enabled,
      >       >       >       >       >       bootconsole disabled
      >       >       >       >       >       >  Lock dependency validator:
      Copyright (c)
      >       2006 Red
      >       >       Hat,
      >       >       >       Inc.,
      >       >       >       >       Ingo
      >       >       >       >       >       Molnar ... 
MAX_LOCKDEP_SUBCLASSES:  8
      ...
      >       >       MAX_LOCK_DEPTH:
      >       >       >       >        48
      >       >       >       >       >       ... MAX_LOCKDEP_KEYS:        8191 
...
      >       >       CLASSHASH_SIZE:
      >       >       >       >        4096 ...
      >       >       >       >       >       MAX_LOCKDEP_ENTRIES:     16384 ...
      >       >       MAX_LOCKDEP_CHAINS:
      >       >       >        32768
      >       >       >       >       ...
      >       >       >       >       >       CHAINHASH_SIZE:          16384
       memory used
      >       by lock
      >       >       >       dependency
      >       >       >       >       info:
      >       >       >       >       >       6367 kB  per task-struct memory
      footprint:
      >       2688
      >       >       bytes
      >       >       >       allocated
      >       >       >       >       17039360
      >       >       >       >       >       bytes of page_cgroup please try
      >       >       'cgroup_disable=memory'
      >       >       >       option if
      >       >       >       >       you
      >       >       >       >       >       don't want memory cgroups 
installing
      Xen
      >       timer for
      >       >       CPU 0
      >       >       >       Detected
      >       >       >       >       >       3200.206 MHz processor. 
Calibrating
      delay
      >       loop
      >       >       (skipped),
      >       >       >       value
      >       >       >       >       >       calculated using timer frequency..
      6400.41
      >       BogoMIPS
      >       >       >       (lpj=3200206)
      >       >       >       >       >       Security Framework initialized
      SELinux:
      >       >        Initializing.
      >       >       >       Dentry
      >       >       >       >       cache hash
      >       >       >       >       >       table entries: 262144 (order: 9,
      2097152
      >       bytes)
      >       >       >       Inode-cache hash
      >       >       >       >       table
      >       >       >       >       >       entries: 131072 (order: 8, 1048576
      bytes)
      >       >       Mount-cache hash
      >       >       >       table
      >       >       >       >       >       entries: 256 Initializing cgroup
      subsys ns
      >       >       Initializing
      >       >       >       cgroup
      >       >       >       >       subsys
      >       >       >       >       >       cpuacct Initializing cgroup subsys
      memory
      >       >       Initializing
      >       >       >       cgroup
      >       >       >       >       subsys
      >       >       >       >       >       devices Initializing cgroup subsys
      freezer
      >       >       Initializing
      >       >       >       cgroup
      >       >       >       >       subsys
      >       >       >       >       >       net_cls CPU: L1 I cache: 32K, L1 D
      cache:
      >       32K CPU:
      >       >       L2
      >       >       >       cache: 256K
      >       >       >       >       CPU:
      >       >       >       >       >       L3 cache: 12288K CPU 0/0x0 ->  
Node 0
      CPU:
      >       >       Unsupported
      >       >       >       number of
      >       >       >       >       siblings
      >       >       >       >       >       32 Performance Events: 
unsupported p6
      CPU
      >       model 44
      >       >       no PMU
      >       >       >       driver,
      >       >       >       >       >       software events only. lockdep: 
fixing
      up
      >       >       alternatives. SMP
      >       >       >       >       alternatives:
      >       >       >       >       >       switching to UP code ACPI: Core
      revision
      >       20090903
      >       >       ftrace:
      >       >       >       >       converting
      >       >       >       >       >       mcount calls to 0f 1f 44 00 00
      ftrace:
      >       allocating
      >       >       27971
      >       >       >       entries
      >       >       >       >       in 110
      >       >       >       >       >       pages installing Xen timer for 
CPU 1
      >       lockdep:
      >       >       fixing up
      >       >       >       >       alternatives.
      >       >       >       >       >       SMP alternatives: switching to SMP
      code
      >       >       Initializing CPU#1
      >       >       >       CPU:
      >       >       >       >       L1 I
      >       >       >       >       >       cache: 32K, L1 D cache: 32K CPU: 
L2
      cache:
      >       256K
      >       >       CPU: L3
      >       >       >       cache:
      >       >       >       >       12288K
      >       >       >       >       >       CPU 1/0x0 ->  Node 0 CPU: 
Unsupported
      number
      >       of
      >       >       siblings 32
      >       >       >       >       installing
      >       >       >       >       >       Xen timer for CPU 2 Initializing
      CPU#2 CPU:
      >       L1 I
      >       >       cache:
      >       >       >       32K, L1 D
      >       >       >       >       cache:
      >       >       >       >       >       32K CPU: L2 cache: 256K CPU: L3
      cache:
      >       12288K CPU
      >       >       2/0x0 ->
      >       >       >       Node 0
      >       >       >       >       CPU:
      >       >       >       >       >       Unsupported number of siblings 32
      installing
      >       Xen
      >       >       timer for
      >       >       >       CPU 3
      >       >       >       >       >       Initializing CPU#3 CPU: L1 I 
cache:
      32K, L1
      >       D
      >       >       cache: 32K
      >       >       >       CPU: L2
      >       >       >       >       cache:
      >       >       >       >       >       256K CPU: L3 cache: 12288K CPU 
3/0x0
      ->  Node
      >       0 CPU:
      >       >       >       Unsupported
      >       >       >       >       number
      >       >       >       >       >       of siblings 32 installing Xen 
timer
      for CPU
      >       4
      >       >       Initializing
      >       >       >       CPU#4
      >       >       >       >       CPU: L1
      >       >       >       >       >       I cache: 32K, L1 D cache: 32K 
CPU: L2
      cache:
      >       256K
      >       >       CPU: L3
      >       >       >       cache:
      >       >       >       >       12288K
      >       >       >       >       >       CPU 4/0x0 ->  Node 0 CPU: 
Unsupported
      number
      >       of
      >       >       siblings 32
      >       >       >       >       installing
      >       >       >       >       >       Xen timer for CPU 5 Initializing
      CPU#5 CPU:
      >       L1 I
      >       >       cache:
      >       >       >       32K, L1 D
      >       >       >       >       cache:
      >       >       >       >       >       32K CPU: L2 cache: 256K CPU: L3
      cache:
      >       12288K CPU
      >       >       5/0x0 ->
      >       >       >       Node 0
      >       >       >       >       CPU:
      >       >       >       >       >       Unsupported number of siblings 32
      installing
      >       Xen
      >       >       timer for
      >       >       >       CPU 6
      >       >       >       >       >       Initializing CPU#6 CPU: L1 I 
cache:
      32K, L1
      >       D
      >       >       cache: 32K
      >       >       >       CPU: L2
      >       >       >       >       cache:
      >       >       >       >       >       256K CPU: L3 cache: 12288K CPU 
6/0x0
      ->  Node
      >       0 CPU:
      >       >       >       Unsupported
      >       >       >       >       number
      >       >       >       >       >       of siblings 32 installing Xen 
timer
      for CPU
      >       7
      >       >       Initializing
      >       >       >       CPU#7
      >       >       >       >       CPU: L1
      >       >       >       >       >       I cache: 32K, L1 D cache: 32K 
CPU: L2
      cache:
      >       256K
      >       >       CPU: L3
      >       >       >       cache:
      >       >       >       >       12288K
      >       >       >       >       >       CPU 7/0x0 ->  Node 0 CPU: 
Unsupported
      number
      >       of
      >       >       siblings 32
      >       >       >       >       installing
      >       >       >       >       >       Xen timer for CPU 8 Initializing
      CPU#8 CPU:
      >       L1 I
      >       >       cache:
      >       >       >       32K, L1 D
      >       >       >       >       cache:
      >       >       >       >       >       32K CPU: L2 cache: 256K CPU: L3
      cache:
      >       12288K CPU
      >       >       8/0x0 ->
      >       >       >       Node 0
      >       >       >       >       CPU:
      >       >       >       >       >       Unsupported number of siblings 32
      installing
      >       Xen
      >       >       timer for
      >       >       >       CPU 9
      >       >       >       >       >       Initializing CPU#9 CPU: L1 I 
cache:
      32K, L1
      >       D
      >       >       cache: 32K
      >       >       >       CPU: L2
      >       >       >       >       cache:
      >       >       >       >       >       256K CPU: L3 cache: 12288K CPU 
9/0x0
      ->  Node
      >       0 CPU:
      >       >       >       Unsupported
      >       >       >       >       number
      >       >       >       >       >       of siblings 32 installing Xen 
timer
      for CPU
      >       10
      >       >       >       Initializing
      >       >       >       >       CPU#10 CPU:
      >       >       >       >       >       L1 I cache: 32K, L1 D cache: 32K 
CPU:
      L2
      >       cache:
      >       >       256K CPU:
      >       >       >       L3
      >       >       >       >       cache:
      >       >       >       >       >       12288K CPU 10/0x0 ->  Node 0 CPU:
      Unsupported
      >       number
      >       >       of
      >       >       >       siblings
      >       >       >       >       32
      >       >       >       >       >       installing Xen timer for CPU 11
      Initializing
      >       CPU#11
      >       >       CPU:
      >       >       >       L1 I
      >       >       >       >       cache:
      >       >       >       >       >       32K, L1 D cache: 32K CPU: L2 
cache:
      256K
      >       CPU: L3
      >       >       cache:
      >       >       >       12288K
      >       >       >       >       CPU
      >       >       >       >       >       11/0x0 ->  Node 0 CPU: Unsupported
      number of
      >       >       siblings 32
      >       >       >       Brought
      >       >       >       >       up 12
      >       >       >       >       >       CPUs Grant table initialized
      regulator: core
      >       >       version 0.5
      >       >       >       Time:
      >       >       >       >       14:45:00
      >       >       >       >       >        Date: 03/16/10 NET: Registered
      protocol
      >       family 16
      >       >       >       >       xenbus_probe_init ok
      >       >       >       >       >       ACPI FADT declares the system 
doesn't
      >       support PCIe
      >       >       ASPM,
      >       >       >       so
      >       >       >       >       disable it
      >       >       >       >       >       ACPI: bus type pci registered PCI:
      MCFG
      >       >       configuration 0:
      >       >       >       base
      >       >       >       >       a0000000
      >       >       >       >       >       segment 0 buses 0 - 255 PCI: MCFG
      area at
      >       a0000000
      >       >       >       reserved in
      >       >       >       >       E820 PCI:
      >       >       >       >       >       Using MMCONFIG at a0000000 - 
afffffff
      PCI:
      >       Using
      >       >       >       configuration
      >       >       >       >       type 1
      >       >       >       >       >       for base access bio: create slab
      <bio-0>  at
      >       0 ACPI
      >       >       Error:
      >       >       >       Field
      >       >       >       >       [CPB3]
      >       >       >       >       >       at 96 exceeds Buffer [NULL] size 
64
      (bits)
      >       >       >       >       (20090903/dsopcode-596) ACPI
      >       >       >       >       >       Error (psparse-0537): Method
      parse/execution
      >       failed
      >       >       >       [\_SB_._OSC]
      >       >       >       >       (Node
      >       >       >       >       >       ffff880064e00c98),
      AE_AML_BUFFER_LIMIT ACPI:
      >       >       Interpreter
      >       >       >       enabled
      >       >       >       >       ACPI:
      >       >       >       >       >       (supports S0 S1 S3 S4 S5) ACPI: 
Using
      IOAPIC
      >       for
      >       >       interrupt
      >       >       >       >       routing ACPI
      >       >       >       >       >       Warning: Incorrect checksum in 
table
      [    ]
      >       - 97,
      >       >       should
      >       >       >       be DB
      >       >       >       >       >       (20090903/tbutils-314) ACPI: No 
dock
      devices
      >       found.
      >       >       ACPI:
      >       >       >       PCI
      >       >       >       >       Root
      >       >       >       >       >       Bridge [PCI0] (0000:00) pci
      0000:00:01.0:
      >       PME#
      >       >       supported
      >       >       >       from D0
      >       >       >       >       D3hot
      >       >       >       >       >       D3cold pci 0000:00:01.0: PME#
      disabled pci
      >       >       0000:00:02.0:
      >       >       >       PME#
      >       >       >       >       supported
      >       >       >       >       >       from D0 D3hot D3cold pci
      0000:00:02.0: PME#
      >       >       disabled pci
      >       >       >       >       0000:00:03.0:
      >       >       >       >       >       PME# supported from D0 D3hot 
D3cold
      pci
      >       >       0000:00:03.0: PME#
      >       >       >       >       disabled pci
      >       >       >       >       >       0000:00:04.0: PME# supported from 
D0
      D3hot
      >       D3cold
      >       >       pci
      >       >       >       >       0000:00:04.0: PME#
      >       >       >       >       >       disabled pci 0000:00:05.0: PME#
      supported
      >       from D0
      >       >       D3hot
      >       >       >       D3cold
      >       >       >       >       pci
      >       >       >       >       >       0000:00:05.0: PME# disabled pci
      >       0000:00:06.0: PME#
      >       >       >       supported from
      >       >       >       >       D0
      >       >       >       >       >       D3hot D3cold pci 0000:00:06.0: 
PME#
      disabled
      >       pci
      >       >       >       0000:00:07.0:
      >       >       >       >       PME#
      >       >       >       >       >       supported from D0 D3hot D3cold pci
      >       0000:00:07.0:
      >       >       PME#
      >       >       >       disabled
      >       >       >       >       pci
      >       >       >       >       >       0000:00:08.0: PME# supported from 
D0
      D3hot
      >       D3cold
      >       >       pci
      >       >       >       >       0000:00:08.0: PME#
      >       >       >       >       >       disabled pci 0000:00:09.0: PME#
      supported
      >       from D0
      >       >       D3hot
      >       >       >       D3cold
      >       >       >       >       pci
      >       >       >       >       >       0000:00:09.0: PME# disabled pci
      >       0000:00:0a.0: PME#
      >       >       >       supported from
      >       >       >       >       D0
      >       >       >       >       >       D3hot D3cold pci 0000:00:0a.0: 
PME#
      disabled
      >       pci
      >       >       >       0000:00:13.0:
      >       >       >       >       PME#
      >       >       >       >       >       supported from D0 D3hot D3cold pci
      >       0000:00:13.0:
      >       >       PME#
      >       >       >       disabled
      >       >       >       >       pci
      >       >       >       >       >       0000:00:1a.7: PME# supported from 
D0
      D3hot
      >       D3cold
      >       >       pci
      >       >       >       >       0000:00:1a.7: PME#
      >       >       >       >       >       disabled pci 0000:00:1c.0: PME#
      supported
      >       from D0
      >       >       D3hot
      >       >       >       D3cold
      >       >       >       >       pci
      >       >       >       >       >       0000:00:1c.0: PME# disabled pci
      >       0000:00:1c.4: PME#
      >       >       >       supported from
      >       >       >       >       D0
      >       >       >       >       >       D3hot D3cold pci 0000:00:1c.4: 
PME#
      disabled
      >       pci
      >       >       >       0000:00:1c.5:
      >       >       >       >       PME#
      >       >       >       >       >       supported from D0 D3hot D3cold pci
      >       0000:00:1c.5:
      >       >       PME#
      >       >       >       disabled
      >       >       >       >       pci
      >       >       >       >       >       0000:00:1d.7: PME# supported from 
D0
      D3hot
      >       D3cold
      >       >       pci
      >       >       >       >       0000:00:1d.7: PME#
      >       >       >       >       >       disabled pci 0000:00:1f.0: quirk:
      region
      >       0400-047f
      >       >       claimed
      >       >       >       by
      >       >       >       >       ICH6
      >       >       >       >       >       ACPI/GPIO/TCO pci 0000:00:1f.0:
      quirk:
      >       region
      >       >       0500-053f
      >       >       >       claimed
      >       >       >       >       by ICH6
      >       >       >       >       >       GPIO pci 0000:00:1f.0: ICH7 LPC
      Generic IO
      >       decode 1
      >       >       PIO at
      >       >       >       0680
      >       >       >       >       (mask
      >       >       >       >       >       000f) pci 0000:00:1f.0: ICH7 LPC
      Generic IO
      >       decode
      >       >       2 PIO
      >       >       >       at 0ca0
      >       >       >       >       (mask
      >       >       >       >       >       000f) pci 0000:00:1f.0: ICH7 LPC
      Generic IO
      >       decode
      >       >       3 PIO
      >       >       >       at 0600
      >       >       >       >       (mask
      >       >       >       >       >       001f) pci 0000:00:1f.2: PME#
      supported from
      >       D3hot
      >       >       pci
      >       >       >       >       0000:00:1f.2: PME#
      >       >       >       >       >       disabled pci 0000:01:00.0: PME#
      supported
      >       from D0
      >       >       D3hot
      >       >       >       D3cold
      >       >       >       >       pci
      >       >       >       >       >       0000:01:00.0: PME# disabled pci
      >       0000:01:00.1: PME#
      >       >       >       supported from
      >       >       >       >       D0
      >       >       >       >       >       D3hot D3cold pci 0000:01:00.1: 
PME#
      disabled
      >       pci
      >       >       >       0000:0c:00.0:
      >       >       >       >       disabling
      >       >       >       >       >       ASPM on pre-1.1 PCIe device.  You 
can
      enable
      >       it
      >       >       with
      >       >       >       >       'pcie_aspm=force'
      >       >       >       >       >       pci 0000:00:1e.0: transparent 
bridge
      ACPI:
      >       PCI Root
      >       >       Bridge
      >       >       >       [PCI1]
      >       >       >       >       >       (0000:fe) ACPI: PCI Root Bridge
      [PCI2]
      >       (0000:ff)
      >       >       ACPI: PCI
      >       >       >       >       Interrupt
      >       >       >       >       >       Link [LNKA] (IRQs 3 4 5 6 7 9 10 
*11
      12 14
      >       15)
      >       >       ACPI: PCI
      >       >       >       >       Interrupt Link
      >       >       >       >       >       [LNKB] (IRQs 3 4 5 6 7 9 *10 11 
12 14
      15)
      >       ACPI: PCI
      >       >       >       Interrupt
      >       >       >       >       Link
      >       >       >       >       >       [LNKC] (IRQs 3 4 5 6 7 *9 10 11 
12 14
      15)
      >       ACPI: PCI
      >       >       >       Interrupt
      >       >       >       >       Link
      >       >       >       >       >       [LNKD] (IRQs 3 4 *5 6 7 9 10 11 
12 14
      15)
      >       ACPI: PCI
      >       >       >       Interrupt
      >       >       >       >       Link
      >       >       >       >       >       [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 
14
      15) *0,
      >       >       disabled.
      >       >       >       ACPI: PCI
      >       >       >       >       >       Interrupt Link [LNKF] (IRQs 3 4 5 
6 7
      9 10
      >       *11 12
      >       >       14 15)
      >       >       >       ACPI:
      >       >       >       >       PCI
      >       >       >       >       >       Interrupt Link [LNKG] (IRQs 3 4 5 
6 7
      9 10
      >       11 12 14
      >       >       15)
      >       >       >       *0,
      >       >       >       >       disabled.
      >       >       >       >       >       ACPI: PCI Interrupt Link [LNKH] 
(IRQs
      3 4 5
      >       6 7 9
      >       >       *10 11
      >       >       >       12 14
      >       >       >       >       15)
      >       >       >       >       >       xenbus_probe_backend_init bus
      registered ok
      >       >       >       >       xenbus_probe_frontend_init
      >       >       >       >       >       bus registered ok xen_balloon:
      Initialising
      >       balloon
      >       >       driver
      >       >       >       with
      >       >       >       >       page
      >       >       >       >       >       order 0. vgaarb: device added:
      >       >       >       >       >
      >       >        PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
      >       >       >       vgaarb:
      >       >       >       >       loaded
      >       >       >       >       >       SCSI subsystem initialized 
usbcore:
      >       registered new
      >       >       >       interface
      >       >       >       >       driver
      >       >       >       >       >       usbfs usbcore: registered new
      interface
      >       driver hub
      >       >       >       usbcore:
      >       >       >       >       registered
      >       >       >       >       >       new device driver usb PCI: Using 
ACPI
      for
      >       IRQ
      >       >       routing
      >       >       >       NetLabel:
      >       >       >       >       >       Initializing NetLabel:  domain 
hash
      size =
      >       128
      >       >       NetLabel:
      >       >       >       >        protocols =
      >       >       >       >       >       UNLABELED CIPSOv4 NetLabel:
       unlabeled
      >       traffic
      >       >       allowed by
      >       >       >       default
      >       >       >       >       >       Switching to clocksource xen 
kstop/0
      used
      >       greatest
      >       >       stack
      >       >       >       depth:
      >       >       >       >       6568
      >       >       >       >       >       bytes left kstop/1 used greatest
      stack
      >       depth: 6536
      >       >       bytes
      >       >       >       left
      >       >       >       >       pnp: PnP
      >       >       >       >       >       ACPI init ACPI: bus type pnp
      registered
      >       >       xen_allocate_pirq:
      >       >       >       >       returning irq
      >       >       >       >       >       8 for gsi 8 Already setup the GSI 
:8
      >       >       xen_allocate_pirq:
      >       >       >       returning
      >       >       >       >       irq 13
      >       >       >       >       >       for gsi 13 Already setup the GSI 
:13
      pnp:
      >       PnP ACPI:
      >       >       found
      >       >       >       13
      >       >       >       >       devices
      >       >       >       >       >       ACPI: ACPI bus type pnp 
unregistered
      system
      >       00:07:
      >       >       ioport
      >       >       >       range
      >       >       >       >       >       0x500-0x53f has been reserved 
system
      00:07:
      >       ioport
      >       >       range
      >       >       >       >       0x400-0x47f has
      >       >       >       >       >       been reserved system 00:07: ioport
      range
      >       >       0x800-0x81f has
      >       >       >       been
      >       >       >       >       reserved
      >       >       >       >       >       system 00:07: ioport range
      0x2f8-0x2ff has
      >       been
      >       >       reserved
      >       >       >       system
      >       >       >       >       00:07:
      >       >       >       >       >       iomem range 0xfed1c000-0xfed8bffe
      could not
      >       be
      >       >       reserved
      >       >       >       system
      >       >       >       >       00:07:
      >       >       >       >       >       iomem range 0xff000000-0xffffffff
      could not
      >       be
      >       >       reserved
      >       >       >       system
      >       >       >       >       00:07:
      >       >       >       >       >       iomem range 0xfee00000-0xfeefffff 
has
      been
      >       reserved
      >       >       system
      >       >       >       00:07:
      >       >       >       >       iomem
      >       >       >       >       >       range 0xfe900000-0xfe90001f has 
been
      >       reserved
      >       >       system
      >       >       >       00:07: iomem
      >       >       >       >       range
      >       >       >       >       >       0xfea00000-0xfea0001f has been
      reserved
      >       system
      >       >       00:07:
      >       >       >       iomem range
      >       >       >       >       >       0xfed1b000-0xfed1bfff has been
      reserved pci
      >       >       0000:0c:00.0:
      >       >       >       BAR 6:
      >       >       >       >       no
      >       >       >       >       >       parent found for of device
      >       [0xffff0000-0xffffffff]
      >       >       pci
      >       >       >       >       0000:00:01.0: PCI
      >       >       >       >       >       bridge, secondary bus 0000:01 pci
      >       0000:00:01.0:
      >       >       IO
      >       >       >       window:
      >       >       >       >       >       0x1000-0x1fff pci 0000:00:01.0:   
MEM
      >       window:
      >       >       >       >       0xb1900000-0xb19fffff pci
      >       >       >       >       >       0000:00:01.0:   PREFETCH window:
      disabled
      >       pci
      >       >       >       0000:00:02.0: PCI
      >       >       >       >       bridge,
      >       >       >       >       >       secondary bus 0000:02 pci
      0000:00:02.0:   IO
      >       >       window:
      >       >       >       disabled pci
      >       >       >       >       >       0000:00:02.0:   MEM window: 
disabled
      pci
      >       >       0000:00:02.0:
      >       >       >       PREFETCH
      >       >       >       >       >       window: disabled pci 0000:00:03.0:
      PCI
      >       bridge,
      >       >       secondary
      >       >       >       bus
      >       >       >       >       0000:03 pci
      >       >       >       >       >       0000:00:03.0:   IO window: 
disabled
      pci
      >       >       0000:00:03.0:
      >       >       >       MEM
      >       >       >       >       window:
      >       >       >       >       >       disabled pci 0000:00:03.0:   
PREFETCH
      >       window:
      >       >       disabled pci
      >       >       >       >       0000:00:04.0:
      >       >       >       >       >       PCI bridge, secondary bus 0000:04 
pci
      >       0000:00:04.0:
      >       >         IO
      >       >       >       window:
      >       >       >       >       >       disabled pci 0000:00:04.0:   MEM
      window:
      >       disabled
      >       >       pci
      >       >       >       >       0000:00:04.0:
      >       >       >       >       >       PREFETCH window: disabled pci
      0000:00:05.0:
      >       PCI
      >       >       bridge,
      >       >       >       secondary
      >       >       >       >       bus
      >       >       >       >       >       0000:05 pci 0000:00:05.0:   IO
      window:
      >       disabled pci
      >       >       >       0000:00:05.0:
      >       >       >       >         MEM
      >       >       >       >       >       window: disabled pci 0000:00:05.0:
      >       PREFETCH
      >       >       window:
      >       >       >       disabled
      >       >       >       >       pci
      >       >       >       >       >       0000:00:06.0: PCI bridge, 
secondary
      bus
      >       0000:06 pci
      >       >       >       0000:00:06.0:
      >       >       >       >         IO
      >       >       >       >       >       window: disabled pci 0000:00:06.0:
      MEM
      >       window:
      >       >       disabled
      >       >       >       pci
      >       >       >       >       >       0000:00:06.0:   PREFETCH window:
      disabled
      >       pci
      >       >       >       0000:00:07.0: PCI
      >       >       >       >       bridge,
      >       >       >       >       >       secondary bus 0000:07 pci
      0000:00:07.0:   IO
      >       >       window:
      >       >       >       disabled pci
      >       >       >       >       >       0000:00:07.0:   MEM window: 
disabled
      pci
      >       >       0000:00:07.0:
      >       >       >       PREFETCH
      >       >       >       >       >       window: disabled pci 0000:00:08.0:
      PCI
      >       bridge,
      >       >       secondary
      >       >       >       bus
      >       >       >       >       0000:08 pci
      >       >       >       >       >       0000:00:08.0:   IO window: 
disabled
      pci
      >       >       0000:00:08.0:
      >       >       >       MEM
      >       >       >       >       window:
      >       >       >       >       >       disabled pci 0000:00:08.0:   
PREFETCH
      >       window:
      >       >       disabled pci
      >       >       >       >       0000:00:09.0:
      >       >       >       >       >       PCI bridge, secondary bus 0000:09 
pci
      >       0000:00:09.0:
      >       >         IO
      >       >       >       window:
      >       >       >       >       >       0x3000-0x3fff pci 0000:00:09.0:   
MEM
      >       window:
      >       >       >       >       0xb1b00000-0xb1cfffff pci
      >       >       >       >       >       0000:00:09.0:   PREFETCH window:
      >       >       >       >       0x000000b1d00000-0x000000b1efffff pci
      >       >       >       >       >       0000:00:0a.0: PCI bridge, 
secondary
      bus
      >       0000:0a pci
      >       >       >       0000:00:0a.0:
      >       >       >       >         IO
      >       >       >       >       >       window: disabled pci 0000:00:0a.0:
      MEM
      >       window:
      >       >       disabled
      >       >       >       pci
      >       >       >       >       >       0000:00:0a.0:   PREFETCH window:
      disabled
      >       pci
      >       >       >       0000:00:1c.0: PCI
      >       >       >       >       bridge,
      >       >       >       >       >       secondary bus 0000:0b pci
      0000:00:1c.0:   IO
      >       >       window:
      >       >       >       disabled pci
      >       >       >       >       >       0000:00:1c.0:   MEM window: 
disabled
      pci
      >       >       0000:00:1c.0:
      >       >       >       PREFETCH
      >       >       >       >       >       window: disabled pci 0000:00:1c.4:
      PCI
      >       bridge,
      >       >       secondary
      >       >       >       bus
      >       >       >       >       0000:0c pci
      >       >       >       >       >       0000:00:1c.4:   IO window: 
disabled
      pci
      >       >       0000:00:1c.4:
      >       >       >       MEM
      >       >       >       >       window:
      >       >       >       >       >       0xb1000000-0xb18fffff pci
      0000:00:1c.4:
      >       PREFETCH
      >       >       window:
      >       >       >       >       >       0x000000b0000000-0x000000b0ffffff 
pci
      >       0000:00:1c.5:
      >       >       PCI
      >       >       >       bridge,
      >       >       >       >       >       secondary bus 0000:0d pci
      0000:00:1c.5:   IO
      >       >       window:
      >       >       >       disabled pci
      >       >       >       >       >       0000:00:1c.5:   MEM window: 
disabled
      pci
      >       >       0000:00:1c.5:
      >       >       >       PREFETCH
      >       >       >       >       >       window: disabled pci 0000:00:1e.0:
      PCI
      >       bridge,
      >       >       secondary
      >       >       >       bus
      >       >       >       >       0000:0e pci
      >       >       >       >       >       0000:00:1e.0:   IO window: 
disabled
      pci
      >       >       0000:00:1e.0:
      >       >       >       MEM
      >       >       >       >       window:
      >       >       >       >       >       disabled pci 0000:00:1e.0:   
PREFETCH
      >       window:
      >       >       disabled pci
      >       >       >       >       0000:00:01.0:
      >       >       >       >       >       PCI INT A ->  GSI 28 (level, low) 
->
      IRQ 28
      >       pci
      >       >       >       0000:00:02.0: PCI
      >       >       >       >       INT A
      >       >       >       >       >       ->  GSI 29 (level, low) ->  IRQ 
29 pci
      >       0000:00:03.0:
      >       >       PCI INT
      >       >       >       A ->
      >       >       >       >       GSI 24
      >       >       >       >       >       (level, low) ->  IRQ 24 pci
      0000:00:04.0: PCI
      >       INT A
      >       >       ->  GSI
      >       >       >       25
      >       >       >       >       (level,
      >       >       >       >       >       low) ->  IRQ 25 pci 0000:00:05.0: 
PCI
      INT A
      >       ->  GSI
      >       >       26
      >       >       >       (level, low)
      >       >       >       >       ->  IRQ
      >       >       >       >       >       26 pci 0000:00:06.0: PCI INT A -> 
 GSI
      27
      >       (level,
      >       >       low) ->
      >       >       >       IRQ 27
      >       >       >       >       pci
      >       >       >       >       >       0000:00:07.0: PCI INT A ->  GSI 30
      (level,
      >       low) ->
      >       >       IRQ 30
      >       >       >       pci
      >       >       >       >       >       0000:00:08.0: PCI INT A ->  GSI 31
      (level,
      >       low) ->
      >       >       IRQ 31
      >       >       >       pci
      >       >       >       >       >       0000:00:09.0: PCI INT A ->  GSI 32
      (level,
      >       low) ->
      >       >       IRQ 32
      >       >       >       pci
      >       >       >       >       >       0000:00:0a.0: PCI INT A ->  GSI 33
      (level,
      >       low) ->
      >       >       IRQ 33
      >       >       >       pci
      >       >       >       >       >       0000:00:1c.0: PCI INT A ->  GSI 16
      (level,
      >       low) ->
      >       >       IRQ 16
      >       >       >       >       >       xen_allocate_pirq: returning irq 
16
      for gsi
      >       16
      >       >       Already
      >       >       >       setup the
      >       >       >       >       GSI :16
      >       >       >       >       >       pci 0000:00:1c.4: PCI INT A ->  
GSI 16
      >       (level, low)
      >       >       ->  IRQ
      >       >       >       16 pci
      >       >       >       >       >       0000:00:1c.5: PCI INT B ->  GSI 17
      (level,
      >       low) ->
      >       >       IRQ 17
      >       >       >       NET:
      >       >       >       >       Registered
      >       >       >       >       >       protocol family 2 IP route cache 
hash
      table
      >       >       entries: 65536
      >       >       >       >       (order: 7,
      >       >       >       >       >       524288 bytes) TCP established hash
      table
      >       entries:
      >       >       262144
      >       >       >       (order:
      >       >       >       >       10,
      >       >       >       >       >       4194304 bytes) TCP bind hash table
      entries:
      >       65536
      >       >       (order:
      >       >       >       10,
      >       >       >       >       4718592
      >       >       >       >       >       bytes) TCP: Hash tables configured
      >       (established
      >       >       262144
      >       >       >       bind
      >       >       >       >       65536) TCP
      >       >       >       >       >       reno registered NET: Registered
      protocol
      >       family 1
      >       >       pci
      >       >       >       >       0000:01:00.0:
      >       >       >       >       >       Disabling L0s pci 0000:01:00.1:
      Disabling
      >       L0s
      >       >       Trying to
      >       >       >       unpack
      >       >       >       >       rootfs
      >       >       >       >       >       image as initramfs... Freeing 
initrd
      memory:
      >       6474k
      >       >       freed
      >       >       >       DMA-API:
      >       >       >       >       >       preallocated 32768 debug entries
      DMA-API:
      >       debugging
      >       >       >       enabled by
      >       >       >       >       kernel
      >       >       >       >       >       config PCI-DMA: Using software 
bounce
      >       buffering for
      >       >       IO
      >       >       >       (SWIOTLB)
      >       >       >       >       DMA:
      >       >       >       >       >       Placing 64MB software IO TLB 
between
      >       >       ffff880007525000 -
      >       >       >       >       ffff88000b525000
      >       >       >       >       >       DMA: software IO TLB at phys
      0x7525000 -
      >       0xb525000
      >       >       audit:
      >       >       >       >       initializing
      >       >       >       >       >       netlink socket (disabled) 
type=2000
      >       >       >       audit(1268750702.035:1):
      >       >       >       >       initialized
      >       >       >       >       >       HugeTLB registered 2 MB page size,
      >       pre-allocated 0
      >       >       pages
      >       >       >       VFS:
      >       >       >       >       Disk
      >       >       >       >       >       quotas dquot_6.5.2 Dquot-cache 
hash
      table
      >       entries:
      >       >       512
      >       >       >       (order 0,
      >       >       >       >       4096
      >       >       >       >       >       bytes) msgmni has been set to 2970
      >       cryptomgr_test
      >       >       used
      >       >       >       greatest
      >       >       >       >       stack
      >       >       >       >       >       depth: 5864 bytes left 
cryptomgr_test
      used
      >       greatest
      >       >       stack
      >       >       >       depth:
      >       >       >       >       5816
      >       >       >       >       >       bytes left alg: No test for stdrng
      (krng)
      >       Block
      >       >       layer SCSI
      >       >       >       >       generic (bsg)
      >       >       >       >       >       driver version 0.4 loaded (major 
252)
      io
      >       scheduler
      >       >       noop
      >       >       >       >       registered io
      >       >       >       >       >       scheduler anticipatory registered 
io
      >       scheduler
      >       >       deadline
      >       >       >       >       registered io
      >       >       >       >       >       scheduler cfq registered (default)
      >       pci_hotplug: PCI
      >       >       Hot
      >       >       >       Plug PCI
      >       >       >       >       Core
      >       >       >       >       >       version: 0.5 pciehp
      0000:00:09.0:pcie04: HPC
      >       >       vendor_id
      >       >       >       8086
      >       >       >       >       device_id
      >       >       >       >       >       3410 ss_vid 0 ss_did 0 pciehp: PCI
      Express
      >       Hot Plug
      >       >       >       Controller
      >       >       >       >       Driver
      >       >       >       >       >       version: 0.4 acpiphp: ACPI Hot 
Plug
      PCI
      >       Controller
      >       >       Driver
      >       >       >       >       version: 0.5
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       acpiphp_glue: Slot 2 already
      registered by
      >       another
      >       >       hotplug
      >       >       >       driver
      >       >       >       >       >       pci-stub: invalid id string "" 
input:
      Sleep
      >       Button
      >       >       as
      >       >       >       >       >
      >       >        /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
      >       >       >       ACPI:
      >       >       >       >       Sleep
      >       >       >       >       >       Button [SLPB] input: Power Button 
as
      >       >       >       >       >
      >        /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
      >       >       Power
      >       >       >       Button
      >       >       >       >       [PWRF]
      >       >       >       >       >       registering netback 
hpet_acpi_add: no
      >       address or
      >       >       irqs in
      >       >       >       _CRS
      >       >       >       >       >       Non-volatile memory driver v1.3 
Linux
      >       agpgart
      >       >       interface
      >       >       >       v0.103
      >       >       >       >       Serial:
      >       >       >       >       >       8250/16550 driver, 4 ports, IRQ
      sharing
      >       enabled
      >       >       >       serial8250: ttyS1
      >       >       >       >       at I/O
      >       >       >       >       >       0x2f8 (irq = 3) is a 16550A brd:
      module
      >       loaded
      >       >       loop:
      >       >       >       module
      >       >       >       >       loaded
      >       >       >       >       >       input: Macintosh mouse button
      emulation as
      >       >       >       >       /devices/virtual/input/input2
      >       >       >       >       >       ahci 0000:00:1f.2: PCI INT A ->  
GSI
      19
      >       (level, low)
      >       >       ->  IRQ
      >       >       >       19
      >       >       >       >       ahci
      >       >       >       >       >       0000:00:1f.2: AHCI 0001.0200 32 
slots
      6
      >       ports 3
      >       >       Gbps 0x3f
      >       >       >       impl
      >       >       >       >       SATA mode
      >       >       >       >       >       ahci 0000:00:1f.2: flags: 64bit 
ncq
      sntf pm
      >       led clo
      >       >       pio
      >       >       >       slum part
      >       >       >       >       ccc
      >       >       >       >       >       ems  scsi0 : ahci scsi1 : ahci 
scsi2
      : ahci
      >       scsi3 :
      >       >       ahci
      >       >       >       scsi4 :
      >       >       >       >       ahci
      >       >       >       >       >       scsi5 : ahci ata1: SATA max 
UDMA/133
      >       irq_stat
      >       >       0x00400040,
      >       >       >       >       connection
      >       >       >       >       >       status changed irq 2996 ata2: SATA
      max
      >       UDMA/133
      >       >       abar
      >       >       >       >       m2048@0xb1a00000
      >       >       >       >       >       port 0xb1a00180 irq 2996 ata3: 
SATA
      max
      >       UDMA/133
      >       >       abar
      >       >       >       >       m2048@0xb1a00000
      >       >       >       >       >       port 0xb1a00200 irq 2996 ata4: 
SATA
      max
      >       UDMA/133
      >       >       abar
      >       >       >       >       m2048@0xb1a00000
      >       >       >       >       >       port 0xb1a00280 irq 2996 ata5: 
SATA
      max
      >       UDMA/133
      >       >       abar
      >       >       >       >       m2048@0xb1a00000
      >       >       >       >       >       port 0xb1a00300 irq 2996 ata6: 
SATA
      max
      >       UDMA/133
      >       >       abar
      >       >       >       >       m2048@0xb1a00000
      >       >       >       >       >       port 0xb1a00380 irq 2996 Fixed 
MDIO
      Bus:
      >       probed
      >       >       ehci_hcd:
      >       >       >       USB 2.0
      >       >       >       >       >       'Enhanced' Host Controller (EHCI)
      Driver
      >       ehci_hcd
      >       >       >       0000:00:1a.7:
      >       >       >       >       PCI INT
      >       >       >       >       >       C ->  GSI 18 (level, low) ->  IRQ 
18
      ehci_hcd
      >       >       0000:00:1a.7:
      >       >       >       EHCI
      >       >       >       >       Host
      >       >       >       >       >       Controller ehci_hcd 0000:00:1a.7: 
new
      USB
      >       bus
      >       >       registered,
      >       >       >       >       assigned bus
      >       >       >       >       >       number 1 ehci_hcd 0000:00:1a.7: 
debug
      port 1
      >       >       ehci_hcd
      >       >       >       >       0000:00:1a.7: irq
      >       >       >       >       >       18, io mem 0xb1a02000 ehci_hcd
      0000:00:1a.7:
      >       USB
      >       >       2.0
      >       >       >       started,
      >       >       >       >       EHCI 1.00
      >       >       >       >       >       usb usb1: New USB device found,
      >       idVendor=1d6b,
      >       >       >       idProduct=0002 usb
      >       >       >       >       usb1:
      >       >       >       >       >       New USB device strings: Mfr=3,
      Product=2,
      >       >       SerialNumber=1
      >       >       >       usb
      >       >       >       >       usb1:
      >       >       >       >       >       Product: EHCI Host Controller usb
      usb1:
      >       >       Manufacturer:
      >       >       >       Linux
      >       >       >       >       2.6.32.9
      >       >       >       >       >       ehci_hcd usb usb1: SerialNumber:
      >       0000:00:1a.7 usb
      >       >       usb1:
      >       >       >       >       configuration #1
      >       >       >       >       >       chosen from 1 choice hub 1-0:1.0: 
USB
      hub
      >       found hub
      >       >       >       1-0:1.0: 6
      >       >       >       >       ports
      >       >       >       >       >       detected ehci_hcd 0000:00:1d.7: 
PCI
      INT A ->
      >       GSI 23
      >       >       >       (level, low)
      >       >       >       >       ->  IRQ
      >       >       >       >       >       23 ehci_hcd 0000:00:1d.7: EHCI 
Host
      >       Controller
      >       >       ehci_hcd
      >       >       >       >       0000:00:1d.7:
      >       >       >       >       >       new USB bus registered, assigned 
bus
      number
      >       2
      >       >       ehci_hcd
      >       >       >       >       0000:00:1d.7:
      >       >       >       >       >       debug port 1 ehci_hcd 
0000:00:1d.7:
      irq 23,
      >       io mem
      >       >       >       0xb1a01000
      >       >       >       >       ehci_hcd
      >       >       >       >       >       0000:00:1d.7: USB 2.0 started, 
EHCI
      1.00 usb
      >       usb2:
      >       >       New USB
      >       >       >       device
      >       >       >       >       found,
      >       >       >       >       >       idVendor=1d6b, idProduct=0002 usb
      usb2: New
      >       USB
      >       >       device
      >       >       >       strings:
      >       >       >       >       Mfr=3,
      >       >       >       >       >       Product=2, SerialNumber=1 usb 
usb2:
      Product:
      >       EHCI
      >       >       Host
      >       >       >       Controller
      >       >       >       >       usb
      >       >       >       >       >       usb2: Manufacturer: Linux 2.6.32.9
      ehci_hcd
      >       usb
      >       >       usb2:
      >       >       >       >       SerialNumber:
      >       >       >       >       >       0000:00:1d.7 usb usb2: 
configuration
      #1
      >       chosen from
      >       >       1
      >       >       >       choice hub
      >       >       >       >       >       2-0:1.0: USB hub found hub 
2-0:1.0: 6
      ports
      >       >       detected
      >       >       >       ohci_hcd:
      >       >       >       >       USB 1.1
      >       >       >       >       >       'Open' Host Controller (OHCI) 
Driver
      >       uhci_hcd: USB
      >       >       >       Universal Host
      >       >       >       >       >       Controller Interface driver
      >       xen_allocate_pirq:
      >       >       returning
      >       >       >       irq 16
      >       >       >       >       for gsi
      >       >       >       >       >       16 Already setup the GSI :16 
uhci_hcd
      >       0000:00:1a.0:
      >       >       PCI
      >       >       >       INT A ->
      >       >       >       >       GSI 16
      >       >       >       >       >       (level, low) ->  IRQ 16 uhci_hcd
      >       0000:00:1a.0: UHCI
      >       >       Host
      >       >       >       >       Controller
      >       >       >       >       >       uhci_hcd 0000:00:1a.0: new USB bus
      >       registered,
      >       >       assigned
      >       >       >       bus
      >       >       >       >       number 3
      >       >       >       >       >       uhci_hcd 0000:00:1a.0: irq 16, io
      base
      >       0x000020e0
      >       >       usb
      >       >       >       usb3: New
      >       >       >       >       USB
      >       >       >       >       >       device found, idVendor=1d6b,
      idProduct=0001
      >       usb
      >       >       usb3: New
      >       >       >       USB
      >       >       >       >       device
      >       >       >       >       >       strings: Mfr=3, Product=2,
      SerialNumber=1
      >       usb usb3:
      >       >       >       Product: UHCI
      >       >       >       >       Host
      >       >       >       >       >       Controller usb usb3: Manufacturer:
      Linux
      >       2.6.32.9
      >       >       uhci_hcd
      >       >       >       usb
      >       >       >       >       usb3:
      >       >       >       >       >       SerialNumber: 0000:00:1a.0 usb 
usb3:
      >       configuration
      >       >       #1
      >       >       >       chosen from
      >       >       >       >       1
      >       >       >       >       >       choice hub 3-0:1.0: USB hub found 
hub
      >       3-0:1.0: 2
      >       >       ports
      >       >       >       detected
      >       >       >       >       uhci_hcd
      >       >       >       >       >       0000:00:1a.1: PCI INT B ->  GSI 21
      (level,
      >       low) ->
      >       >       IRQ 21
      >       >       >       uhci_hcd
      >       >       >       >       >       0000:00:1a.1: UHCI Host Controller
      uhci_hcd
      >       >       0000:00:1a.1:
      >       >       >       new USB
      >       >       >       >       bus
      >       >       >       >       >       registered, assigned bus number 4
      uhci_hcd
      >       >       0000:00:1a.1:
      >       >       >       irq 21,
      >       >       >       >       io base
      >       >       >       >       >       0x000020c0 usb usb4: New USB 
device
      found,
      >       >       idVendor=1d6b,
      >       >       >       >       idProduct=0001
      >       >       >       >       >       usb usb4: New USB device strings:
      Mfr=3,
      >       Product=2,
      >       >       >       >       SerialNumber=1 usb
      >       >       >       >       >       usb4: Product: UHCI Host 
Controller
      usb
      >       usb4:
      >       >       >       Manufacturer: Linux
      >       >       >       >       >       2.6.32.9 uhci_hcd usb usb4:
      SerialNumber:
      >       >       0000:00:1a.1 usb
      >       >       >       usb4:
      >       >       >       >       >       configuration #1 chosen from 1 
choice
      hub
      >       4-0:1.0:
      >       >       USB hub
      >       >       >       found
      >       >       >       >       hub
      >       >       >       >       >       4-0:1.0: 2 ports detected
      xen_allocate_pirq:
      >       >       returning irq
      >       >       >       19 for
      >       >       >       >       gsi 19
      >       >       >       >       >       Already setup the GSI :19 uhci_hcd
      >       0000:00:1a.2:
      >       >       PCI INT D
      >       >       >       ->  GSI
      >       >       >       >       19
      >       >       >       >       >       (level, low) ->  IRQ 19 uhci_hcd
      >       0000:00:1a.2: UHCI
      >       >       Host
      >       >       >       >       Controller
      >       >       >       >       >       uhci_hcd 0000:00:1a.2: new USB bus
      >       registered,
      >       >       assigned
      >       >       >       bus
      >       >       >       >       number 5
      >       >       >       >       >       uhci_hcd 0000:00:1a.2: irq 19, io
      base
      >       0x000020a0
      >       >       usb
      >       >       >       usb5: New
      >       >       >       >       USB
      >       >       >       >       >       device found, idVendor=1d6b,
      idProduct=0001
      >       usb
      >       >       usb5: New
      >       >       >       USB
      >       >       >       >       device
      >       >       >       >       >       strings: Mfr=3, Product=2,
      SerialNumber=1
      >       usb usb5:
      >       >       >       Product: UHCI
      >       >       >       >       Host
      >       >       >       >       >       Controller usb usb5: Manufacturer:
      Linux
      >       2.6.32.9
      >       >       uhci_hcd
      >       >       >       usb
      >       >       >       >       usb5:
      >       >       >       >       >       SerialNumber: 0000:00:1a.2 usb 
usb5:
      >       configuration
      >       >       #1
      >       >       >       chosen from
      >       >       >       >       1
      >       >       >       >       >       choice hub 5-0:1.0: USB hub found 
hub
      >       5-0:1.0: 2
      >       >       ports
      >       >       >       detected
      >       >       >       >       >       xen_allocate_pirq: returning irq 
23
      for gsi
      >       23
      >       >       Already
      >       >       >       setup the
      >       >       >       >       GSI :23
      >       >       >       >       >       uhci_hcd 0000:00:1d.0: PCI INT A 
->
      GSI 23
      >       (level,
      >       >       low) ->
      >       >       >       IRQ 23
      >       >       >       >       >       uhci_hcd 0000:00:1d.0: UHCI Host
      Controller
      >       >       uhci_hcd
      >       >       >       >       0000:00:1d.0: new
      >       >       >       >       >       USB bus registered, assigned bus
      number 6
      >       uhci_hcd
      >       >       >       0000:00:1d.0:
      >       >       >       >       irq 23,
      >       >       >       >       >       io base 0x00002080 usb usb6: New 
USB
      device
      >       found,
      >       >       >       idVendor=1d6b,
      >       >       >       >       >       idProduct=0001 usb usb6: New USB
      device
      >       strings:
      >       >       Mfr=3,
      >       >       >       >       Product=2,
      >       >       >       >       >       SerialNumber=1 usb usb6: Product:
      UHCI Host
      >       >       Controller usb
      >       >       >       usb6:
      >       >       >       >       >       Manufacturer: Linux 2.6.32.9 
uhci_hcd
      usb
      >       usb6:
      >       >       >       SerialNumber:
      >       >       >       >       >       0000:00:1d.0 usb usb6: 
configuration
      #1
      >       chosen from
      >       >       1
      >       >       >       choice hub
      >       >       >       >       >       6-0:1.0: USB hub found hub 
6-0:1.0: 2
      ports
      >       >       detected
      >       >       >       >       xen_allocate_pirq:
      >       >       >       >       >       returning irq 19 for gsi 19 
Already
      setup
      >       the GSI
      >       >       :19
      >       >       >       uhci_hcd
      >       >       >       >       >       0000:00:1d.1: PCI INT B ->  GSI 19
      (level,
      >       low) ->
      >       >       IRQ 19
      >       >       >       uhci_hcd
      >       >       >       >       >       0000:00:1d.1: UHCI Host Controller
      uhci_hcd
      >       >       0000:00:1d.1:
      >       >       >       new USB
      >       >       >       >       bus
      >       >       >       >       >       registered, assigned bus number 7
      uhci_hcd
      >       >       0000:00:1d.1:
      >       >       >       irq 19,
      >       >       >       >       io base
      >       >       >       >       >       0x00002060 usb usb7: New USB 
device
      found,
      >       >       idVendor=1d6b,
      >       >       >       >       idProduct=0001
      >       >       >       >       >       usb usb7: New USB device strings:
      Mfr=3,
      >       Product=2,
      >       >       >       >       SerialNumber=1 usb
      >       >       >       >       >       usb7: Product: UHCI Host 
Controller
      usb
      >       usb7:
      >       >       >       Manufacturer: Linux
      >       >       >       >       >       2.6.32.9 uhci_hcd usb usb7:
      SerialNumber:
      >       >       0000:00:1d.1 usb
      >       >       >       usb7:
      >       >       >       >       >       configuration #1 chosen from 1 
choice
      hub
      >       7-0:1.0:
      >       >       USB hub
      >       >       >       found
      >       >       >       >       hub
      >       >       >       >       >       7-0:1.0: 2 ports detected
      xen_allocate_pirq:
      >       >       returning irq
      >       >       >       18 for
      >       >       >       >       gsi 18
      >       >       >       >       >       Already setup the GSI :18 uhci_hcd
      >       0000:00:1d.2:
      >       >       PCI INT C
      >       >       >       ->  GSI
      >       >       >       >       18
      >       >       >       >       >       (level, low) ->  IRQ 18 uhci_hcd
      >       0000:00:1d.2: UHCI
      >       >       Host
      >       >       >       >       Controller
      >       >       >       >       >       uhci_hcd 0000:00:1d.2: new USB bus
      >       registered,
      >       >       assigned
      >       >       >       bus
      >       >       >       >       number 8
      >       >       >       >       >       uhci_hcd 0000:00:1d.2: irq 18, io
      base
      >       0x00002040
      >       >       usb
      >       >       >       usb8: New
      >       >       >       >       USB
      >       >       >       >       >       device found, idVendor=1d6b,
      idProduct=0001
      >       usb
      >       >       usb8: New
      >       >       >       USB
      >       >       >       >       device
      >       >       >       >       >       strings: Mfr=3, Product=2,
      SerialNumber=1
      >       usb usb8:
      >       >       >       Product: UHCI
      >       >       >       >       Host
      >       >       >
      >       >
      >       >  References
      >       >
      >       >     Visible links
      >       >     1. mailto:[20][21]pasik@xxxxxx
      >       >     2. mailto:[21][22]pasik@xxxxxx
      >       >     3. mailto:[22][23]pasik@xxxxxx
      >       >     4. mailto:[23][24]pasik@xxxxxx
      >       >     5. mailto:[24][25]pasik@xxxxxx
      >       >     6.
      >
       [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >     7.
      >
       
[26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >     8. mailto:[27][28]pasik@xxxxxx
      >       >     9.
      >
       [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >    10.
      >
       
[29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >    11. mailto:[30][31]pasik@xxxxxx
      >       >    12. mailto:[31][32]pasik@xxxxxx
      >       >    13.
      >
       [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >    14.
      >
       
[33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >    15. mailto:[34][35]pasik@xxxxxx
      >       >    16.
      >
       [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >       >    17.
      >
       
[36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >       >    18. mailto:[37][38]pasik@xxxxxx
      >
      >  References
      >
      >     Visible links
      >     1. mailto:[39]pasik@xxxxxx
      >     2. mailto:[40]pasik@xxxxxx
      >     3. mailto:[41]pasik@xxxxxx
      >     4. mailto:[42]pasik@xxxxxx
      >     5. mailto:[43]pasik@xxxxxx
      >     6. mailto:[44]pasik@xxxxxx
      >     7.
      [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >     8.
      
[46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >     9. mailto:[47]pasik@xxxxxx
      >    10.
      [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    11.
      
[49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    12. mailto:[50]pasik@xxxxxx
      >    13. mailto:[51]pasik@xxxxxx
      >    14.
      [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    15.
      
[53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    16. mailto:[54]pasik@xxxxxx
      >    17.
      [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    18.
      
[56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    19. mailto:[57]pasik@xxxxxx
      >    20. mailto:[58]pasik@xxxxxx
      >    21. mailto:[59]pasik@xxxxxx
      >    22. mailto:[60]pasik@xxxxxx
      >    23. mailto:[61]pasik@xxxxxx
      >    24. mailto:[62]pasik@xxxxxx
      >    25.
      [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    26.
      
[64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    27. mailto:[65]pasik@xxxxxx
      >    28.
      [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    29.
      
[67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    30. mailto:[68]pasik@xxxxxx
      >    31. mailto:[69]pasik@xxxxxx
      >    32.
      [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    33.
      
[71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    34. mailto:[72]pasik@xxxxxx
      >    35.
      [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
      >    36.
      
[74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
      >    37. mailto:[75]pasik@xxxxxx

References

    Visible links
    1. mailto:pasik@xxxxxx
    2. mailto:pasik@xxxxxx
    3. mailto:pasik@xxxxxx
    4. mailto:pasik@xxxxxx
    5. mailto:pasik@xxxxxx
    6. mailto:pasik@xxxxxx
    7. mailto:pasik@xxxxxx
    8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
    9. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   10. mailto:pasik@xxxxxx
   11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   12. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   13. mailto:pasik@xxxxxx
   14. mailto:pasik@xxxxxx
   15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   16. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   17. mailto:pasik@xxxxxx
   18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   19. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   20. mailto:pasik@xxxxxx
   21. mailto:pasik@xxxxxx
   22. mailto:pasik@xxxxxx
   23. mailto:pasik@xxxxxx
   24. mailto:pasik@xxxxxx
   25. mailto:pasik@xxxxxx
   26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   27. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   28. mailto:pasik@xxxxxx
   29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   30. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   31. mailto:pasik@xxxxxx
   32. mailto:pasik@xxxxxx
   33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   34. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   35. mailto:pasik@xxxxxx
   36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   37. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   38. mailto:pasik@xxxxxx
   39. mailto:pasik@xxxxxx
   40. mailto:pasik@xxxxxx
   41. mailto:pasik@xxxxxx
   42. mailto:pasik@xxxxxx
   43. mailto:pasik@xxxxxx
   44. mailto:pasik@xxxxxx
   45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   46. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   47. mailto:pasik@xxxxxx
   48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   49. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   50. mailto:pasik@xxxxxx
   51. mailto:pasik@xxxxxx
   52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   53. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   54. mailto:pasik@xxxxxx
   55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   56. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   57. mailto:pasik@xxxxxx
   58. mailto:pasik@xxxxxx
   59. mailto:pasik@xxxxxx
   60. mailto:pasik@xxxxxx
   61. mailto:pasik@xxxxxx
   62. mailto:pasik@xxxxxx
   63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   64. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   65. mailto:pasik@xxxxxx
   66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   67. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   68. mailto:pasik@xxxxxx
   69. mailto:pasik@xxxxxx
   70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   71. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   72. mailto:pasik@xxxxxx
   73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
   74. 
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
   75. mailto:pasik@xxxxxx



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.