|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs()
On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote: > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote: >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: >> >>> Attached is the capture log after changing the grub.conf to >>> >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset >>> initcall_debug debug swiotlb=force apic=debug loglevel=10 >>> >>> for the dom 0 kernel command line. >>> >>> >> Hmm, interesting. Now it seems to crash in a different place. >> >> Jeremy: Have you seen this one earlier? >> > > No, but it looks like the result of "apic=debug" on the kernel command > line. That won't do anything useful (the kernel has no APICs, they all > belong to Xen), and can only cause harm. As it appears to have done. > Ok, my bad. So please remove the "apic=debug" from the dom0 kernel cmdline and try again. It should look like this: ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 -- Pasi > J > >> .... IRQ redirection table: >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: >> 00 000 0 0 0 0 0 0 0 00 >> IRQ to pin mappings: >> BUG: unable to handle kernel NULL pointer dereference at (null) >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 >> PGD 0 >> Oops: 0000 [#1] SMP >> last sysfs file: >> CPU 0 >> Modules linked in: >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] >> print_all_ICs+0x487/0x500 >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 >> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 >> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000 >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000) >> Stack: >> ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002 >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332 >> Call Trace: >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc >> [<ffffffff81013eaa>] child_rip+0xa/0x20 >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc >> [<ffffffff81013810>] ? restore_args+0x0/0x30 >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 >> 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> 83 3b 00 74 >> 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 >> RSP<ffff880064edbe20> >> CR2: 0000000000000000 >> ---[ end trace 0007ad9d59420718 ]--- >> swapper used greatest stack depth: 4168 bytes left >> Kernel panic - not syncing: Attempted to kill init! >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 >> Call Trace: >> [<ffffffff8105b747>] panic+0xa5/0x167 >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 >> [<ffffffff8108f823>] ? lock_release+0x179/0x184 >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c >> [<ffffffff8105efa7>] do_exit+0x7e/0x701 >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef >> [<ffffffff8147764c>] oops_end+0xbf/0xc7 >> [<ffffffff81038a02>] no_context+0x1f1/0x200 >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 >> [<ffffffff8100f452>] ? check_events+0x12/0x20 >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 >> [<ffffffff814769d5>] page_fault+0x25/0x30 >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93 >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc >> [<ffffffff81013eaa>] child_rip+0xa/0x20 >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc >> [<ffffffff81013810>] ? restore_args+0x0/0x30 >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20 >> >> >> -- Pasi >> >> >> >>> >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@xxxxxx> >>> wrote: >>> >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: >>> > pvdisplay does not work in my RHEL machine. >>> > >>> > I did pvscan. >>> > below is the output. >>> > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] >>> > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] >>> > >>> >>> Ok so /dev/sda2 is the correct device holding the VolGroup01. >>> >>> Looking at your latest capture.doc I see this: >>> >>> Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen >>> nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 >>> >>> So your root= parameter is wrong! Edit grub.conf and replace it with >>> the >>> actual root device: >>> root=/dev/VolGroup01/LogVol00 >>> >>> -- Pasi >>> >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen >>> <[1][2]pasik@xxxxxx> wrote: >>> > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: >>> > > I did the below steps for pvops dom 0 kernel. >>> > > >>> > > make menuconfig >>> > > make bzImage >>> > > make modules >>> > > make modules_install >>> > > cp -a .config /boot/config-2.6.32.10 >>> > > cp -a System.map /boot/System.map-2.6.32.10 >>> > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 >>> > > /sbin/mkinitrd -f --builtin=ahci >>> /boot/initrd-2.6.32.10.img >>> > 2.6.32.10 >>> > > I tried root=/dev/VolGroup01/LogVol00 . >>> > > >>> > >>> > Ok. >>> > >>> > Please run "pvdisplay" to see which actual partition is the >>> LVM >>> PV for >>> > your >>> > volume group. >>> > >>> > Also if you're running Fedora 12 you could try generating an >>> initrd >>> > image >>> > with dracut instead of mkinitrd. >>> > >>> > -- Pasi >>> > >>> > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen >>> > <[1][2][3]pasik@xxxxxx> wrote: >>> > > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore >>> kumar >>> wrote: >>> > > > Here is the output of df -h and cat /etc/fstab >>> of my >>> > machine. >>> > > > >>> > > >>> > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 >>> and >>> > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 >>> kernel? >>> > > >>> > > How did you generate the initrd image for the dom0 >>> kernel? >>> > > >>> > > Anyway this sounds like a grub.conf or initrd >>> problem, not >>> Xen or >>> > pvops >>> > > dom0 kernel kernel problem. >>> > > >>> > > -- Pasi >>> > > >>> > > > Please let me know your thoughts. >>> > > > >>> > > > [root@localhost kishore]# df -h >>> > > > >>> > > > Filesystem Size Used Avail Use% Mounted on >>> > > > >>> > > > /dev/mapper/VolGroup01-LogVol00 >>> > > > >>> > > > 223G 29G >>> 182G 14% >>> / >>> > > > >>> > > > /dev/sda1 99M 81M 13M 87% /boot >>> > > > >>> > > > tmpfs 757M 0 757M 0% /dev/shm >>> > > > >>> > > > [root@localhost kishore]# cat /etc/fstab >>> > > > >>> > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 >>> > > > >>> > > > LABEL=/boot /boot ext3 defaults 1 2 >>> > > > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0 >>> > > > >>> > > > devpts /dev/pts devpts gid=5,mode=620 0 0 >>> > > > >>> > > > sysfs /sys sysfs defaults 0 0 >>> > > > >>> > > > proc /proc proc defaults 0 0 >>> > > > >>> > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 >>> > > > >>> > > > [root@localhost kishore]# >>> > > > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen >>> > > <[1][2][3][4]pasik@xxxxxx> wrote: >>> > > > >>> > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, >>> kishore >>> kumar >>> > wrote: >>> > > > > I am not sure. Can you please let me >>> know how >>> to >>> > check >>> > > this? any >>> > > > command >>> > > > > ?? >>> > > > >>> > > > well simple "df -h" will show it. and also >>> "cat >>> > /etc/fstab". >>> > > > You can also check it from your grub >>> configuration.. from >>> > the >>> > > working >>> > > > baremetal (non-Xen) entry. >>> > > > >>> > > > -- Pasi >>> > > > > >>> > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi >>> Kärkkäinen >>> > > > <[1][2][3][4][5]pasik@xxxxxx> wrote: >>> > > > > >>> > > > > On Tue, Mar 16, 2010 at 03:22:50PM >>> -0700, >>> kishore >>> > kumar >>> > > wrote: >>> > > > > > attached is the log captured >>> in with >>> the word >>> > > document . >>> > > > > > >>> > > > > >>> > > > > Scanning logical volumes >>> > > > > Reading all physical volumes. This >>> may >>> take a >>> > while... >>> > > > > Activating logical volumes >>> > > > > Volume group "VolGroup01" not found >>> > > > > Trying to resume from >>> /dev/VolGroup01/LogVol01 >>> > > > > Unable to access resume device >>> > (/dev/VolGroup01/LogVol01) >>> > > > > Creating root device. >>> > > > > Mounting root filesystem. >>> > > > > mount: could not find filesystem >>> '/dev/root' >>> > > > > Setting up other filesystems. >>> > > > > Setting up new root fs >>> > > > > setuproot: moving /dev failed: No >>> such file >>> or >>> > directory >>> > > > > no fstab.sys, mounting internal >>> defaults >>> > > > > setuproot: error mounting /proc: No >>> such >>> file or >>> > directory >>> > > > > setuproot: error mounting /sys: No >>> such file >>> or >>> > directory >>> > > > > Switching to new root and running >>> init. >>> > > > > unmounting old /dev >>> > > > > unmounting old /proc >>> > > > > unmounting old /sys >>> > > > > switchroot: mount failed: No such >>> file or >>> directory >>> > > > > init used greatest stack depth: 4088 >>> bytes >>> left >>> > > > > Kernel panic - not syncing: Attempted >>> to >>> kill init! >>> > > > > >>> > > > > So it seems it gets all the way to >>> executing >>> the >>> > initrd >>> > > image, >>> > > > > which then fails to mount the root fs. >>> > > > > >>> > > > > Earlier in the log: >>> > > > > ata1: SATA link up 3.0 Gbps (SStatus >>> 123 >>> SControl >>> > 300) >>> > > > > ata1.00: ATA-8: Hitachi >>> HDT721025SLA380, >>> STBOA3AA, >>> > max >>> > > UDMA/133 >>> > > > > ata1.00: 488397168 sectors, multi 0: >>> LBA48 >>> NCQ >>> > (depth >>> > > 31/32), AA >>> > > > > ata1.00: configured for UDMA/133 >>> > > > > scsi 0:0:0:0: Direct-Access ATA >>> Hitachi >>> > HDT72102 >>> > > STBO >>> > > > PQ: 0 >>> > > > > ANSI: 5 >>> > > > > sd 0:0:0:0: Attached scsi generic sg0 >>> type 0 >>> > > > > sd 0:0:0:0: [sda] 488397168 512-byte >>> logical >>> > blocks: (250 >>> > > GB/232 >>> > > > GiB) >>> > > > > sd 0:0:0:0: [sda] Write Protect is off >>> > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a >>> 00 00 >>> > > > > sd 0:0:0:0: [sda] Write cache: >>> enabled, read >>> cache: >>> > > enabled, >>> > > > doesn't >>> > > > > support DPO or FUA >>> > > > > sda: sda1 sda2 >>> > > > > sd 0:0:0:0: [sda] Attached SCSI disk >>> > > > > >>> > > > > so /dev/sda was detected. Is your >>> root lvm >>> volume >>> > on >>> > > /dev/sda ? >>> > > > > Is /dev/VolGroup01/LogVol01 really >>> your root >>> fs? >>> > > > > >>> > > > > -- Pasi >>> > > > > >>> > > > > > >>> > > > > > >>> > > > > > On Tue, Mar 16, 2010 at 3:03 >>> PM, Pasi >>> > Kärkkäinen >>> > > > > <[1][2][3][4][5][6]pasik@xxxxxx> >>> wrote: >>> > > > > > >>> > > > > > On Tue, Mar 16, 2010 at >>> 02:56:06PM >>> -0700, >>> > kishore >>> > > kumar >>> > > > wrote: >>> > > > > > > Please find the >>> attached log >>> file after >>> > fixing >>> > > the >>> > > > dom 0 >>> > > > > kernel cmd >>> > > > > > line >>> > > > > > > as below >>> > > > > > > >>> > > > > > > ro >>> root=/dev/VolGroup01/LogVol00 >>> > console=hvc0 >>> > > > > earlyprintk=xen >>> > > > > > nomodeset >>> > > > > > > >>> > > > > > >>> > > > > > There's something wrong with >>> the log, >>> the >>> > dom0 >>> > > kernel >>> > > > parts are >>> > > > > all on >>> > > > > > one line.. >>> > > > > > It's really difficult to read >>> it. >>> > > > > > >>> > > > > > -- Pasi >>> > > > > > >>> > > > > > > Thanks >>> > > > > > > >>> > > > > > > >>> > > > > > > On Tue, Mar 16, 2010 at >>> 2:29 PM, >>> Pasi >>> > > Kärkkäinen >>> > > > > > >>> <[1][2][3][4][5][6][7]pasik@xxxxxx> >>> wrote: >>> > > > > > > >>> > > > > > > On Tue, Mar 16, 2010 >>> at >>> 02:16:22PM >>> > -0700, >>> > > kishore >>> > > > kumar >>> > > > > wrote: >>> > > > > > > > I did below >>> steps. >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > I pulled DOM 0 >>> kernel >>> from >>> > > > > > > > git clone >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > > linux-2.6-xen >>> > > > > > > > >>> > > > > > > > cd linux-2.6-xen >>> > > > > > > > >>> > > > > > > > make clean >>> > > > > > > > >>> > > > > > > > cp -a .config >>> .config-old >>> > > > > > > > >>> > > > > > > > wget -O .config >>> > > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > > >>> > > > > > > > make oldconfig >>> > > > > > > > >>> > > > > > > > make bzImage >>> > > > > > > > >>> > > > > > > > make modules >>> > > > > > > > >>> > > > > > > > make >>> modules_install >>> > > > > > > > >>> > > > > > > > cp -a .config >>> > /boot/config-2.6.32.9 >>> > > > > > > > >>> > > > > > > > cp -a System.map >>> > > /boot/System.map-2.6.32.9 >>> > > > > > > > >>> > > > > > > > cp -a >>> arch/x86/boot/bzImage >>> > > > /boot/vmlinuz-2.6.32.9 >>> > > > > > > > >>> > > > > > > > and modified the >>> grub.conf as >>> > below >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > Root(hd0,0) >>> > > > > > > > >>> > > > > > > > kernel /xen.gz >>> console=vga,com1 >>> > > > com1=115200,8n1 >>> > > > > msi=1 >>> > > > > > iommu=1 >>> > > > > > > > >>> > > > > > > > module >>> /vmlinuz-2.6.32.9 >>> ro >>> > > > > root=/dev/VolGroup01/LogVo100 >>> > > > > > rhgb >>> > > > > > > quiet >>> > > > > > > > >>> > > > > > > > module >>> /initrd-2.6.32.9.img >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > and rebooted >>> the machine. >>> Then >>> > It >>> > > booted with >>> > > > some >>> > > > > xen >>> > > > > > messages >>> > > > > > > and >>> > > > > > > > stopped. Those >>> were the >>> > messages >>> > > captured >>> > > > from >>> > > > > serial >>> > > > > > console. >>> > > > > > > > >>> > > > > > > > Please let me >>> know if I >>> did >>> > something >>> > > wrong >>> > > > here. >>> > > > > > > > >>> > > > > > > >>> > > > > > > Please fix the kernel >>> cmdline >>> based >>> > on my >>> > > earlier >>> > > > email, >>> > > > > and >>> > > > > > capture and >>> > > > > > > post the >>> > > > > > > serial console log >>> again! >>> > > > > > > >>> > > > > > > -- Pasi >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > On Tue, Mar 16, >>> 2010 at >>> 1:20 PM, >>> > Pasi >>> > > > Kärkkäinen >>> > > > > > > >>> <[3][4][5][6][7][8][9][10]pasik@xxxxxx> >>> > wrote: >>> > > > > > > > >>> > > > > > > > On Tue, Mar >>> 16, 2010 at >>> > 01:16:28PM >>> > > -0700, >>> > > > Jeremy >>> > > > > > Fitzhardinge >>> > > > > > > wrote: >>> > > > > > > > > On >>> 03/16/2010 12:48 >>> PM, Pasi >>> > > Kärkkäinen >>> > > > wrote: >>> > > > > > > > >> On Tue, >>> Mar 16, 2010 >>> at >>> > 09:43:44PM >>> > > +0200, >>> > > > Pasi >>> > > > > > Kärkkäinen >>> > > > > > > wrote: >>> > > > > > > > >> >>> > > > > > > > >>> On Tue, >>> Mar 16, >>> 2010 at >>> > > 10:32:17AM >>> > > > -0700, >>> > > > > kishore >>> > > > > > kumar >>> > > > > > > wrote: >>> > > > > > > > >>> >>> > > > > > > > >>>> >>> Attached is >>> the >>> > output >>> > > captured >>> > > > from >>> > > > > serial >>> > > > > > console. >>> > > > > > > > >>>> >>> > > > > > > > >>>> >>> Machine does >>> not boot >>> > after >>> > > > compiling xen >>> > > > > 3.4.3 >>> > > > > > with >>> > > > > > > pv_ops dom >>> > > > > > > > 0 kernel. >>> > > > > > > > >>>> >>> > > > > > > > >>>> >>> Please let me >>> know >>> > what is >>> > > going >>> > > > wrong >>> > > > > here. >>> > > > > > > > >>>> >>> > > > > > > > >>>> >>> > > > > > > > >>> Ok this >>> looks like >>> a bug >>> > that is >>> > > already >>> > > > being >>> > > > > sorted >>> > > > > > out on >>> > > > > > > > xen-devel >>> mailinglist. >>> > > > > > > > >>> I added >>> CC to >>> xen-devel. >>> > > > > > > > >>> >>> > > > > > > > >>> >>> > > > > > > > >> >>> > > > > > > > > >>> > > > > > > > > Those >>> messages are >>> not a >>> > problem in >>> > > > themselves, >>> > > > > but the >>> > > > > > related >>> > > > > > > > problem >>> > > > > > > > > is >>> believed to be >>> fixed in >>> > current >>> > > > > xen/stable-2.6.32.x. >>> > > > > > It >>> > > > > > > looks like >>> > > > > > > > > the output >>> stops >>> there >>> > because the >>> > > Xen >>> > > > console >>> > > > > isn't set >>> > > > > > up >>> > > > > > > properly >>> > > > > > > > for >>> > > > > > > > > some >>> reason. >>> > > > > > > > > >>> > > > > > > > >>> > > > > > > > Yeah, remove >>> "rhgb >>> quiet" from >>> > the >>> > > options.. >>> > > > the >>> > > > > dom0 >>> > > > > > kernel >>> > > > > > > cmdline >>> > > > > > > > should be >>> like this: >>> > > > > > > > ro >>> > root=/dev/VolGroup01/LogVol00 >>> > > > console=hvc0 >>> > > > > > earlyprintk=xen >>> > > > > > > nomodeset >>> > > > > > > > -- Pasi >>> > > > > > > > >>> > > > > > > > References >>> > > > > > > > >>> > > > > > > > Visible links >>> > > > > > > > 1. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > > 2. >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > > 3. >>> > mailto:[7][8][9][10][11][12][13]pasik@xxxxxx >>> > > > > > > >>> > > > > > > References >>> > > > > > > >>> > > > > > > Visible links >>> > > > > > > 1. >>> > mailto:[9][10][11][12][13][14]pasik@xxxxxx >>> > > > > > > 2. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > 3. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > 4. >>> > mailto:[12][13][14][15][16][17]pasik@xxxxxx >>> > > > > > > 5. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > > > > > 6. >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >>> [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > > > > > 7. >>> > mailto:[15][16][17][18][19][20]pasik@xxxxxx >>> > > > > > > Asserting Post complete >>> GPIO!!! >>> > > > > > > Transfer control to CSM >>> 16-bit >>> binary for >>> > legacy >>> > > boot >>> > > > > > > __ __ _____ _ >>> _ >>> _____ >>> > > _ _ >>> > > > > > > \ \/ /___ _ __ |___ /| >>> || | >>> |___ / >>> > _ __ >>> > > ___| || | >>> > > > _ >>> > > > > __ _ >>> > > > > > __ ___ >>> > > > > > > \ // _ \ '_ \ |_ \| >>> || |_ >>> |_ \ __| >>> > '__/ >>> > > __| || >>> > > > |_ __| >>> > > > > '_ \| >>> > > > > > '__/ _ \ >>> > > > > > > / \ __/ | | | ___) >>> |__ _| >>> ___) |__| >>> > | | >>> > > (__|__ >>> > > > _|__| >>> > > > > |_) | | >>> > > > > > | __/ >>> > > > > > > /_/\_\___|_| |_| |____(_) >>> |_|(_)____/ >>> > |_| >>> > > \___| |_| >>> > > > | >>> > > > > .__/|_| >>> > > > > > \___| >>> > > > > > > >>> > > > |_| >>> > > > > > > (XEN) Xen version >>> 3.4.3-rc4-pre >>> > > (kishore@localdomain) >>> > > > (gcc >>> > > > > version >>> > > > > > 4.1.2 20080704 (Red Hat >>> 4.1.2-46)) >>> Mon Mar >>> > 15 >>> > > 13:44:31 PDT >>> > > > 2010 >>> > > > > > > (XEN) Latest ChangeSet: >>> Tue Mar 09 >>> > 18:15:52 2010 >>> > > +0000 >>> > > > > > 19924:6e72f8c3c017 >>> > > > > > > (XEN) Command line: >>> console=vga,com1 >>> > > com1=115200,8n1 >>> > > > msi=1 >>> > > > > iommu=1 >>> > > > > > > (XEN) Video information: >>> > > > > > > (XEN) VGA is text mode >>> 80x25, font >>> 8x16 >>> > > > > > > (XEN) VBE/DDC methods: >>> none; EDID >>> > transfer time: >>> > > 0 >>> > > > seconds >>> > > > > > > (XEN) EDID info not >>> retrieved >>> because no >>> > DDC >>> > > retrieval >>> > > > method >>> > > > > > detected >>> > > > > > > (XEN) Disc information: >>> > > > > > > (XEN) Found 1 MBR >>> signatures >>> > > > > > > (XEN) Found 1 EDD >>> information >>> structures >>> > > > > > > (XEN) Xen-e820 RAM map: >>> > > > > > > (XEN) 0000000000000000 - >>> 000000000009d000 >>> > > (usable) >>> > > > > > > (XEN) 000000000009d000 - >>> 00000000000a0000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000000e0000 - >>> 0000000000100000 >>> > > (reserved) >>> > > > > > > (XEN) 0000000000100000 - >>> 000000006d597000 >>> > > (usable) >>> > > > > > > (XEN) 000000006d597000 - >>> 000000006d686000 >>> > > (reserved) >>> > > > > > > (XEN) 000000006d686000 - >>> 000000006f598000 >>> > > (usable) >>> > > > > > > (XEN) 000000006f598000 - >>> 000000006f59a000 >>> > > (reserved) >>> > > > > > > (XEN) 000000006f59a000 - >>> 000000006f5af000 >>> > (ACPI >>> > > NVS) >>> > > > > > > (XEN) 000000006f5af000 - >>> 000000006f5d9000 >>> > > (reserved) >>> > > > > > > (XEN) 000000006f5d9000 - >>> 000000006f5f9000 >>> > (ACPI >>> > > data) >>> > > > > > > (XEN) 000000006f5f9000 - >>> 000000006f6df000 >>> > (ACPI >>> > > NVS) >>> > > > > > > (XEN) 000000006f6df000 - >>> 000000006f700000 >>> > (ACPI >>> > > data) >>> > > > > > > (XEN) 000000006f700000 - >>> 0000000080000000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000a0000000 - >>> 00000000b0000000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000fc000000 - >>> 00000000fd000000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000fed1c000 - >>> 00000000fed20000 >>> > > (reserved) >>> > > > > > > (XEN) 00000000ffc00000 - >>> 0000000100000000 >>> > > (reserved) >>> > > > > > > (XEN) System RAM: 1780MB >>> (1823000kB) >>> > > > > > > (XEN) ACPI: RSDP 000F03F0, >>> 0024 (r2 >>> INTEL >>> > ) >>> > > > > > > (XEN) ACPI: XSDT 6F6FE120, >>> 0064 (r1 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > > 1000013) >>> > > > > > > (XEN) ACPI: FACP 6F6FD000, >>> 00F4 (r4 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: DSDT 6F6F5000, >>> 74F1 (r2 >>> INTEL >>> > THRLY >>> > > > 3 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: FACS 6F5F9000, >>> 0040 >>> > > > > > > (XEN) ACPI: APIC 6F6F4000, >>> 01CC (r2 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: MCFG 6F6F3000, >>> 003C (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: HPET 6F6F2000, >>> 0038 (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: SLIT 6F6F1000, >>> 0030 (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: WDDT 6F6F0000, >>> 0040 (r1 >>> INTEL >>> > THRLY >>> > > > 0 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) ACPI: SSDT 6F5D9000, >>> 1FDDC >>> (r1 >>> > INTEL SSDT >>> > > PM >>> > > > 4000 >>> > > > > INTL >>> > > > > > 20061109) >>> > > > > > > (XEN) ACPI: DMAR 6F6EE000, >>> 01D0 (r1 >>> INTEL >>> > THRLY >>> > > > 1 >>> > > > > MSFT >>> > > > > > 100000D) >>> > > > > > > (XEN) Domain heap >>> initialised >>> > > > > > > (XEN) Processor #0 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #2 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #4 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #16 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #18 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #20 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #1 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #3 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #5 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #17 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #19 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) Processor #21 6:12 >>> APIC >>> version 21 >>> > > > > > > (XEN) IOAPIC[0]: apic_id >>> 8, version >>> 32, >>> > address >>> > > > 0xfec00000, GSI >>> > > > > 0-23 >>> > > > > > > (XEN) IOAPIC[1]: apic_id >>> 9, version >>> 32, >>> > address >>> > > > 0xfec90000, GSI >>> > > > > 24-47 >>> > > > > > > (XEN) Enabling APIC mode: >>> Phys. >>> Using 2 >>> > I/O >>> > > APICs >>> > > > > > > (XEN) Intel VT-d DMAR >>> tables have >>> been >>> > parsed. >>> > > > > > > (XEN) Using scheduler: SMP >>> Credit >>> > Scheduler >>> > > (credit) >>> > > > > > > (XEN) Detected 3200.207 MHz >>> processor. >>> > > > > > > (XEN) VMX: Supported >>> advanced >>> features: >>> > > > > > > (XEN) - APIC MMIO access >>> virtualisation >>> > > > > > > (XEN) - APIC TPR shadow >>> > > > > > > (XEN) - Extended Page >>> Tables (EPT) >>> > > > > > > (XEN) - Virtual-Processor >>> Identifiers >>> > (VPID) >>> > > > > > > (XEN) - Virtual NMI >>> > > > > > > (XEN) - MSR direct-access >>> bitmap >>> > > > > > > (XEN) VMX: EPT is >>> available. >>> > > > > > > (XEN) VMX: VPID is >>> available. >>> > > > > > > (XEN) HVM: VMX enabled >>> > > > > > > (XEN) HVM: Hardware >>> Assisted Paging >>> > detected. >>> > > > > > > (XEN) CPU0: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 1/2 eip >>> 88000 >>> > > > > > > (XEN) CPU1: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 2/4 eip >>> 88000 >>> > > > > > > (XEN) CPU2: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 3/16 eip >>> 88000 >>> > > > > > > (XEN) CPU3: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 4/18 eip >>> 88000 >>> > > > > > > (XEN) CPU4: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 5/20 eip >>> 88000 >>> > > > > > > (XEN) CPU5: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 6/1 eip >>> 88000 >>> > > > > > > (XEN) CPU6: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 7/3 eip >>> 88000 >>> > > > > > > (XEN) CPU7: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 8/5 eip >>> 88000 >>> > > > > > > (XEN) CPU8: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 9/17 eip >>> 88000 >>> > > > > > > (XEN) CPU9: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 10/19 eip >>> 88000 >>> > > > > > > (XEN) CPU10: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Booting processor >>> 11/21 eip >>> 88000 >>> > > > > > > (XEN) CPU11: Intel Genuine >>> Intel(R) >>> CPU >>> > > 000 >>> > > > @ >>> > > > > 3.20GHz >>> > > > > > stepping 00 >>> > > > > > > (XEN) Total of 12 >>> processors >>> activated. >>> > > > > > > (XEN) ENABLING IO-APIC IRQs >>> > > > > > > (XEN) -> Using new ACK >>> method >>> > > > > > > (XEN) checking TSC >>> synchronization >>> across >>> > 12 >>> > > CPUs: >>> > > > passed. >>> > > > > > > (XEN) Platform timer is >>> 14.318MHz >>> HPET >>> > > > > > > ?(XEN) Brought up 12 CPUs >>> > > > > > > (XEN) Intel VT-d Snoop >>> Control >>> supported. >>> > > > > > > (XEN) Intel VT-d DMA >>> Passthrough >>> not >>> > supported. >>> > > > > > > (XEN) Intel VT-d Queued >>> Invalidation >>> > supported. >>> > > > > > > (XEN) Intel VT-d Interrupt >>> Remapping >>> > supported. >>> > > > > > > (XEN) I/O virtualisation >>> enabled >>> > > > > > > (XEN) I/O virtualisation >>> for PV >>> guests >>> > disabled >>> > > > > > > (XEN) xenoprof: >>> Initialization >>> failed. >>> > Intel >>> > > processor >>> > > > model 44 >>> > > > > for P6 >>> > > > > > class family is not supported >>> > > > > > > (XEN) *** LOADING DOMAIN 0 >>> *** >>> > > > > > > (XEN) Xen kernel: >>> 64-bit, lsb, >>> compat32 >>> > > > > > > (XEN) Dom0 kernel: >>> 64-bit, PAE, >>> lsb, >>> > paddr >>> > > 0x1000000 -> >>> > > > > 0x26bb000 >>> > > > > > > (XEN) PHYSICAL MEMORY >>> ARRANGEMENT: >>> > > > > > > (XEN) Dom0 alloc.: >>> > > 0000000064000000->0000000068000000 >>> > > > > (404490 pages >>> > > > > > to be allocated) >>> > > > > > > (XEN) VIRTUAL MEMORY >>> ARRANGEMENT: >>> > > > > > > (XEN) Loaded kernel: >>> > > ffffffff81000000->ffffffff826bb000 >>> > > > > > > (XEN) Init. ramdisk: >>> > > ffffffff826bb000->ffffffff82d0d800 >>> > > > > > > (XEN) Phys-Mach map: >>> > > ffffffff82d0e000->ffffffff83044050 >>> > > > > > > (XEN) Start info: >>> > > ffffffff83045000->ffffffff830454b4 >>> > > > > > > (XEN) Page tables: >>> > > ffffffff83046000->ffffffff83063000 >>> > > > > > > (XEN) Boot stack: >>> > > ffffffff83063000->ffffffff83064000 >>> > > > > > > (XEN) TOTAL: >>> > > ffffffff80000000->ffffffff83400000 >>> > > > > > > (XEN) ENTRY ADDRESS: >>> ffffffff819c1200 >>> > > > > > > (XEN) Dom0 has maximum 12 >>> VCPUs >>> > > > > > > (XEN) Scrubbing Free RAM: >>> .done. >>> > > > > > > (XEN) Xen trace buffers: >>> disabled >>> > > > > > > (XEN) Std. Loglevel: >>> Errors and >>> warnings >>> > > > > > > (XEN) Guest Loglevel: >>> Nothing >>> > (Rate-limited: >>> > > Errors and >>> > > > > warnings) >>> > > > > > > (XEN) Xen is relinquishing >>> VGA >>> console. >>> > > > > > > (XEN) *** Serial input -> >>> DOM0 >>> (type >>> > 'CTRL-a' >>> > > three >>> > > > times to >>> > > > > switch >>> > > > > > input to Xen) >>> > > > > > > (XEN) Freed 128kB init >>> memory. >>> > > > > > > mapping kernel into >>> physical memory >>> > > > > > > Xen: setup ISA identity >>> maps >>> > > > > > > about to get started... >>> > > > > > > Initializing cgroup subsys >>> cpuset >>> > > > > > > Initializing cgroup subsys >>> cpu >>> > > > > > > Linux version 2.6.32.9 >>> > > (kishore@xxxxxxxxxxxxxxxxxxxxx) >>> > > > (gcc >>> > > > > version >>> > > > > > 4.1.2 20080704 (Red Hat >>> 4.1.2-46)) #1 >>> SMP >>> > Mon Mar >>> > > 15 >>> > > > 15:16:28 PDT >>> > > > > 2010 >>> > > > > > > Command line: ro >>> > root=/dev/VolGroup01/LogVol00 >>> > > > console=hvc0 >>> > > > > > earlyprintk=xen nomodeset >>> > > > > > > KERNEL supported cpus: >>> > > > > > > Intel GenuineIntel >>> > > > > > > AMD AuthenticAMD >>> > > > > > > Centaur CentaurHauls >>> > > > > > > BIOS-provided physical RAM >>> map: >>> > > > > > > Xen: 0000000000000000 - >>> 000000000009d000 >>> > > (usable) >>> > > > > > > Xen: 000000000009d000 - >>> 0000000000100000 >>> > > (reserved) >>> > > > > > > Xen: 0000000000100000 - >>> 0000000066c0a000 >>> > > (usable) >>> > > > > > > Xen: 000000006d597000 - >>> 000000006d686000 >>> > > (reserved) >>> > > > > > > Xen: 000000006f598000 - >>> 000000006f59a000 >>> > > (reserved) >>> > > > > > > Xen: 000000006f59a000 - >>> 000000006f5af000 >>> > (ACPI >>> > > NVS) >>> > > > > > > Xen: 000000006f5af000 - >>> 000000006f5d9000 >>> > > (reserved) >>> > > > > > > Xen: 000000006f5d9000 - >>> 000000006f5f9000 >>> > (ACPI >>> > > data) >>> > > > > > > Xen: 000000006f5f9000 - >>> 000000006f6df000 >>> > (ACPI >>> > > NVS) >>> > > > > > > Xen: 000000006f6df000 - >>> 000000006f700000 >>> > (ACPI >>> > > data) >>> > > > > > > Xen: 000000006f700000 - >>> 0000000080000000 >>> > > (reserved) >>> > > > > > > Xen: 00000000a0000000 - >>> 00000000b0000000 >>> > > (reserved) >>> > > > > > > Xen: 00000000fc000000 - >>> 00000000fd000000 >>> > > (reserved) >>> > > > > > > Xen: 00000000fed1c000 - >>> 00000000fed20000 >>> > > (reserved) >>> > > > > > > Xen: 00000000ffc00000 - >>> 0000000100000000 >>> > > (reserved) >>> > > > > > > bootconsole [xenboot0] >>> enabled >>> > > > > > > DMI 2.4 present. >>> > > > > > > last_pfn = 0x66c0a >>> max_arch_pfn = >>> > 0x400000000 >>> > > > > > > init_memory_mapping: >>> > > 0000000000000000-0000000066c0a000 >>> > > > > > > RAMDISK: 026bb000 - >>> 02d0d800 >>> > > > > > > ACPI: RSDP >>> 00000000000f03f0 00024 >>> (v02 >>> > INTEL ) >>> > > > > > > ACPI: XSDT >>> 000000006f6fe120 00064 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > > 01000013) >>> > > > > > > ACPI: FACP >>> 000000006f6fd000 000F4 >>> (v04 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: DSDT >>> 000000006f6f5000 074F1 >>> (v02 >>> > INTEL >>> > > THRLY >>> > > > 00000003 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: FACS >>> 000000006f5f9000 00040 >>> > > > > > > ACPI: APIC >>> 000000006f6f4000 001CC >>> (v02 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: MCFG >>> 000000006f6f3000 0003C >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: HPET >>> 000000006f6f2000 00038 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: SLIT >>> 000000006f6f1000 00030 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: WDDT >>> 000000006f6f0000 00040 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000000 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > ACPI: SSDT >>> 000000006f5d9000 1FDDC >>> (v01 >>> > INTEL >>> > > SSDT PM >>> > > > 00004000 >>> > > > > INTL >>> > > > > > 20061109) >>> > > > > > > ACPI: >>> 000000006f6ee000 001D0 >>> (v01 >>> > INTEL >>> > > THRLY >>> > > > 00000001 >>> > > > > MSFT >>> > > > > > 0100000D) >>> > > > > > > No NUMA configuration found >>> > > > > > > Faking a node at >>> > > 0000000000000000-0000000066c0a000 >>> > > > > > > Bootmem setup node 0 >>> > > 0000000000000000-0000000066c0a000 >>> > > > > > > NODE_DATA >>> [0000000000008000 - >>> > 000000000001ffff] >>> > > > > > > bootmap >>> [0000000000020000 - >>> > 000000000002cd87] >>> > > pages d >>> > > > > > > (9 early reservations) ==> >>> bootmem >>> > [0000000000 - >>> > > > 0066c0a000] >>> > > > > > > #0 [0000000000 - >>> 0000001000] >>> BIOS data >>> > page >>> > > ==> >>> > > > [0000000000 >>> > > > > - >>> > > > > > 0000001000] >>> > > > > > > #1 [0003046000 - >>> 0003063000] >>> XEN >>> > PAGETABLES >>> > > ==> >>> > > > [0003046000 >>> > > > > - >>> > > > > > 0003063000] >>> > > > > > > #2 [0000006000 - >>> 0000008000] >>> > TRAMPOLINE >>> > > ==> >>> > > > [0000006000 >>> > > > > - >>> > > > > > 0000008000] >>> > > > > > > #3 [0001000000 - >>> 000269ae98] >>> TEXT >>> > DATA BSS >>> > > ==> >>> > > > [0001000000 >>> > > > > - >>> > > > > > 000269ae98] >>> > > > > > > #4 [00026bb000 - >>> 0002d0d800] >>> > RAMDISK >>> > > ==> >>> > > > [00026bb000 >>> > > > > - >>> > > > > > 0002d0d800] >>> > > > > > > #5 [0002d0e000 - >>> 0003046000] >>> XEN START >>> > INFO >>> > > ==> >>> > > > [0002d0e000 >>> > > > > - >>> > > > > > 0003046000] >>> > > > > > > #6 [000269b000 - >>> 000269b011] >>> > BRK >>> > > ==> >>> > > > [000269b000 >>> > > > > - >>> > > > > > 000269b011] >>> > > > > > > #7 [0000100000 - >>> 000041a000] >>> > PGTABLE >>> > > ==> >>> > > > [0000100000 >>> > > > > - >>> > > > > > 000041a000] >>> > > > > > > #8 [0000001000 - >>> 0000001030] >>> ACPI >>> > SLIT >>> > > ==> >>> > > > [0000001000 >>> > > > > - >>> > > > > > 0000001030] >>> > > > > > > found SMP MP-table at >>> [ffff8800000fd750] >>> > fd750 >>> > > > > > > Zone PFN ranges: >>> > > > > > > DMA 0x00000000 -> >>> 0x00001000 >>> > > > > > > DMA32 0x00001000 -> >>> 0x00100000 >>> > > > > > > Normal 0x00100000 -> >>> 0x00100000 >>> > > > > > > Movable zone start PFN for >>> each >>> node >>> > > > > > > early_node_map[2] active >>> PFN ranges >>> > > > > > > 0: 0x00000000 -> >>> 0x0000009d >>> > > > > > > 0: 0x00000100 -> >>> 0x00066c0a >>> > > > > > > ACPI: PM-Timer IO Port: >>> 0x408 >>> > > > > > > ACPI: LAPIC (acpi_id[0x00] >>> lapic_id[0x00] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x01] >>> lapic_id[0x02] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x02] >>> lapic_id[0x04] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x03] >>> lapic_id[0x10] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x04] >>> lapic_id[0x12] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x05] >>> lapic_id[0x14] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x06] >>> lapic_id[0x01] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x07] >>> lapic_id[0x03] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x08] >>> lapic_id[0x05] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x09] >>> lapic_id[0x11] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0a] >>> lapic_id[0x13] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0b] >>> lapic_id[0x15] >>> > > enabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0c] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0d] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0e] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x0f] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x10] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x11] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x12] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x13] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x14] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x15] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x16] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC (acpi_id[0x17] >>> lapic_id[0xff] >>> > > disabled) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x00] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x01] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x02] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x03] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x04] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x05] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x06] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x07] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x08] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x09] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x0a] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x0b] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x0c] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x0d] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x0e] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x0f] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x10] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x11] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x12] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x13] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x14] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x15] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x16] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: LAPIC_NMI >>> (acpi_id[0x17] high >>> level >>> > > lint[0x1]) >>> > > > > > > ACPI: IOAPIC (id[0x08] >>> address[0xfec00000] >>> > > gsi_base[0]) >>> > > > > > > IOAPIC[0]: apic_id 8, >>> version 0, >>> address >>> > > 0xfec00000, GSI >>> > > > 0-0 >>> > > > > > > ACPI: IOAPIC (id[0x09] >>> address[0xfec90000] >>> > > gsi_base[24]) >>> > > > > > > IOAPIC[1]: apic_id 9, >>> version 0, >>> address >>> > > 0xfec90000, GSI >>> > > > 24-24 >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 >>> bus_irq 0 >>> > global_irq 2 >>> > > dfl dfl) >>> > > > > > > ERROR: Unable to locate >>> IOAPIC for >>> GSI 2 >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 >>> bus_irq 9 >>> > global_irq 9 >>> > > high >>> > > > level) >>> > > > > > > ERROR: Unable to locate >>> IOAPIC for >>> GSI 9 >>> > > > > > > Using ACPI (MADT) for SMP >>> configuration >>> > > information >>> > > > > > > ACPI: HPET id: 0x8086a401 >>> base: >>> 0xfed00000 >>> > > > > > > SMP: Allowing 12 CPUs, 0 >>> hotplug >>> CPUs >>> > > > > > > PM: Registered nosave >>> memory: >>> > 000000000009d000 - >>> > > > > 0000000000100000 >>> > > > > > > Allocating PCI resources >>> starting >>> at >>> > b0000000 >>> > > (gap: >>> > > > > b0000000:4c000000) >>> > > > > > > Booting paravirtualized >>> kernel on >>> Xen >>> > > > > > > Xen version: 3.4.3-rc4-pre >>> (preserve-AD) >>> > (dom0) >>> > > > > > > NR_CPUS:512 >>> nr_cpumask_bits:512 >>> > nr_cpu_ids:12 >>> > > > nr_node_ids:1 >>> > > > > > > PERCPU: Embedded 478 >>> pages/cpu >>> > @ffff880005ebc000 >>> > > > s1928024 r8192 >>> > > > > d21672 >>> > > > > > u1957888 >>> > > > > > > pcpu-alloc: s1928024 r8192 >>> d21672 >>> u1957888 >>> > > > alloc=478*4096 >>> > > > > > > pcpu-alloc: [0] 00 [0] 01 >>> [0] 02 >>> [0] 03 >>> > [0] 04 >>> > > [0] 05 >>> > > > [0] 06 >>> > > > > [0] 07 >>> > > > > > > pcpu-alloc: [0] 08 [0] 09 >>> [0] 10 >>> [0] 11 >>> > > > > > > Xen: using vcpu_info >>> placement >>> > > > > > > Built 1 zonelists in Node >>> order, >>> mobility >>> > > grouping on. >>> > > > Total >>> > > > > pages: >>> > > > > > 409291 >>> > > > > > > Policy zone: DMA32 >>> > > > > > > Kernel command line: ro >>> > > root=/dev/VolGroup01/LogVol00 >>> > > > > console=hvc0 >>> > > > > > earlyprintk=xen nomodeset >>> > > > > > > PID hash table entries: >>> 4096 >>> (order: 3, >>> > 32768 >>> > > bytes) >>> > > > > > > Initializing CPU#0 >>> > > > > > > DMA: Placing 64MB software >>> IO TLB >>> between >>> > > > ffff880007525000 - >>> > > > > > ffff88000b525000 >>> > > > > > > DMA: software IO TLB at >>> phys >>> 0x7525000 - >>> > > 0xb525000 >>> > > > > > > xen_swiotlb_fixup: >>> buf=ffff880007525000 >>> > > size=67108864 >>> > > > > > > xen_swiotlb_fixup: >>> buf=ffff88000b585000 >>> > > size=32768 >>> > > > > > > Memory: 1514268k/1683496k >>> available >>> (4654k >>> > kernel >>> > > code, >>> > > > 396k >>> > > > > absent, >>> > > > > > 168832k reserved, 3443k data, >>> 3396k >>> init) >>> > > > > > > SLUB: Genslabs=14, >>> HWalign=64, >>> Order=0-3, >>> > > MinObjects=0, >>> > > > > CPUs=12, >>> > > > > > Nodes=1 >>> > > > > > > Hierarchical RCU >>> implementation. >>> > > > > > > NR_IRQS:4352 nr_irqs:3072 >>> > > > > > > Already setup the GSI :0 >>> > > > > > > Already setup the GSI :1 >>> > > > > > > Already setup the GSI :2 >>> > > > > > > Already setup the GSI :3 >>> > > > > > > Already setup the GSI :4 >>> > > > > > > Already setup the GSI :5 >>> > > > > > > Already setup the GSI :6 >>> > > > > > > Already setup the GSI :7 >>> > > > > > > Already setup the GSI :8 >>> > > > > > > Already setup the GSI :9 >>> > > > > > > Already setup the GSI :10 >>> > > > > > > Already setup the GSI :11 >>> > > > > > > Already setup the GSI :12 >>> > > > > > > Already setup the GSI :13 >>> > > > > > > Already setup the GSI :14 >>> > > > > > > Already setup the GSI :15 >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 >>> bus_irq 0 >>> > global_irq 2 >>> > > dfl dfl) >>> > > > > > > ACPI: INT_SRC_OVR (bus 0 >>> bus_irq 9 >>> > global_irq 9 >>> > > high >>> > > > level) >>> > > > > > > xen: sci override: >>> source_irq=9 >>> > global_irq=9 >>> > > trigger=c >>> > > > > polarity=1 >>> > > > > > > xen_allocate_pirq: >>> returning irq 9 >>> for gsi >>> > 9 >>> > > > > > > Already setup the GSI :9 >>> > > > > > > xen: acpi sci 9 >>> > > > > > > Console: colour VGA+ 80x25 >>> > > > > > > console [hvc0] enabled, >>> bootconsole >>> > disabled >>> > > console >>> > > > [hvc0] >>> > > > > enabled, >>> > > > > > bootconsole disabled >>> > > > > > > Lock dependency validator: >>> Copyright (c) >>> > 2006 Red >>> > > Hat, >>> > > > Inc., >>> > > > > Ingo >>> > > > > > Molnar ... >>> MAX_LOCKDEP_SUBCLASSES: 8 >>> ... >>> > > MAX_LOCK_DEPTH: >>> > > > > 48 >>> > > > > > ... MAX_LOCKDEP_KEYS: >>> 8191 ... >>> > > CLASSHASH_SIZE: >>> > > > > 4096 ... >>> > > > > > MAX_LOCKDEP_ENTRIES: >>> 16384 ... >>> > > MAX_LOCKDEP_CHAINS: >>> > > > 32768 >>> > > > > ... >>> > > > > > CHAINHASH_SIZE: 16384 >>> memory used >>> > by lock >>> > > > dependency >>> > > > > info: >>> > > > > > 6367 kB per task-struct >>> memory >>> footprint: >>> > 2688 >>> > > bytes >>> > > > allocated >>> > > > > 17039360 >>> > > > > > bytes of page_cgroup please >>> try >>> > > 'cgroup_disable=memory' >>> > > > option if >>> > > > > you >>> > > > > > don't want memory cgroups >>> installing >>> Xen >>> > timer for >>> > > CPU 0 >>> > > > Detected >>> > > > > > 3200.206 MHz processor. >>> Calibrating >>> delay >>> > loop >>> > > (skipped), >>> > > > value >>> > > > > > calculated using timer >>> frequency.. >>> 6400.41 >>> > BogoMIPS >>> > > > (lpj=3200206) >>> > > > > > Security Framework initialized >>> SELinux: >>> > > Initializing. >>> > > > Dentry >>> > > > > cache hash >>> > > > > > table entries: 262144 (order: >>> 9, >>> 2097152 >>> > bytes) >>> > > > Inode-cache hash >>> > > > > table >>> > > > > > entries: 131072 (order: 8, >>> 1048576 >>> bytes) >>> > > Mount-cache hash >>> > > > table >>> > > > > > entries: 256 Initializing >>> cgroup >>> subsys ns >>> > > Initializing >>> > > > cgroup >>> > > > > subsys >>> > > > > > cpuacct Initializing cgroup >>> subsys >>> memory >>> > > Initializing >>> > > > cgroup >>> > > > > subsys >>> > > > > > devices Initializing cgroup >>> subsys >>> freezer >>> > > Initializing >>> > > > cgroup >>> > > > > subsys >>> > > > > > net_cls CPU: L1 I cache: 32K, >>> L1 D >>> cache: >>> > 32K CPU: >>> > > L2 >>> > > > cache: 256K >>> > > > > CPU: >>> > > > > > L3 cache: 12288K CPU 0/0x0 -> >>> Node 0 >>> CPU: >>> > > Unsupported >>> > > > number of >>> > > > > siblings >>> > > > > > 32 Performance Events: >>> unsupported p6 >>> CPU >>> > model 44 >>> > > no PMU >>> > > > driver, >>> > > > > > software events only. >>> lockdep: fixing >>> up >>> > > alternatives. SMP >>> > > > > alternatives: >>> > > > > > switching to UP code ACPI: >>> Core >>> revision >>> > 20090903 >>> > > ftrace: >>> > > > > converting >>> > > > > > mcount calls to 0f 1f 44 00 00 >>> ftrace: >>> > allocating >>> > > 27971 >>> > > > entries >>> > > > > in 110 >>> > > > > > pages installing Xen timer >>> for CPU 1 >>> > lockdep: >>> > > fixing up >>> > > > > alternatives. >>> > > > > > SMP alternatives: switching >>> to SMP >>> code >>> > > Initializing CPU#1 >>> > > > CPU: >>> > > > > L1 I >>> > > > > > cache: 32K, L1 D cache: 32K >>> CPU: L2 >>> cache: >>> > 256K >>> > > CPU: L3 >>> > > > cache: >>> > > > > 12288K >>> > > > > > CPU 1/0x0 -> Node 0 CPU: >>> Unsupported >>> number >>> > of >>> > > siblings 32 >>> > > > > installing >>> > > > > > Xen timer for CPU 2 >>> Initializing >>> CPU#2 CPU: >>> > L1 I >>> > > cache: >>> > > > 32K, L1 D >>> > > > > cache: >>> > > > > > 32K CPU: L2 cache: 256K CPU: >>> L3 >>> cache: >>> > 12288K CPU >>> > > 2/0x0 -> >>> > > > Node 0 >>> > > > > CPU: >>> > > > > > Unsupported number of >>> siblings 32 >>> installing >>> > Xen >>> > > timer for >>> > > > CPU 3 >>> > > > > > Initializing CPU#3 CPU: L1 I >>> cache: >>> 32K, L1 >>> > D >>> > > cache: 32K >>> > > > CPU: L2 >>> > > > > cache: >>> > > > > > 256K CPU: L3 cache: 12288K >>> CPU 3/0x0 >>> -> Node >>> > 0 CPU: >>> > > > Unsupported >>> > > > > number >>> > > > > > of siblings 32 installing Xen >>> timer >>> for CPU >>> > 4 >>> > > Initializing >>> > > > CPU#4 >>> > > > > CPU: L1 >>> > > > > > I cache: 32K, L1 D cache: 32K >>> CPU: L2 >>> cache: >>> > 256K >>> > > CPU: L3 >>> > > > cache: >>> > > > > 12288K >>> > > > > > CPU 4/0x0 -> Node 0 CPU: >>> Unsupported >>> number >>> > of >>> > > siblings 32 >>> > > > > installing >>> > > > > > Xen timer for CPU 5 >>> Initializing >>> CPU#5 CPU: >>> > L1 I >>> > > cache: >>> > > > 32K, L1 D >>> > > > > cache: >>> > > > > > 32K CPU: L2 cache: 256K CPU: >>> L3 >>> cache: >>> > 12288K CPU >>> > > 5/0x0 -> >>> > > > Node 0 >>> > > > > CPU: >>> > > > > > Unsupported number of >>> siblings 32 >>> installing >>> > Xen >>> > > timer for >>> > > > CPU 6 >>> > > > > > Initializing CPU#6 CPU: L1 I >>> cache: >>> 32K, L1 >>> > D >>> > > cache: 32K >>> > > > CPU: L2 >>> > > > > cache: >>> > > > > > 256K CPU: L3 cache: 12288K >>> CPU 6/0x0 >>> -> Node >>> > 0 CPU: >>> > > > Unsupported >>> > > > > number >>> > > > > > of siblings 32 installing Xen >>> timer >>> for CPU >>> > 7 >>> > > Initializing >>> > > > CPU#7 >>> > > > > CPU: L1 >>> > > > > > I cache: 32K, L1 D cache: 32K >>> CPU: L2 >>> cache: >>> > 256K >>> > > CPU: L3 >>> > > > cache: >>> > > > > 12288K >>> > > > > > CPU 7/0x0 -> Node 0 CPU: >>> Unsupported >>> number >>> > of >>> > > siblings 32 >>> > > > > installing >>> > > > > > Xen timer for CPU 8 >>> Initializing >>> CPU#8 CPU: >>> > L1 I >>> > > cache: >>> > > > 32K, L1 D >>> > > > > cache: >>> > > > > > 32K CPU: L2 cache: 256K CPU: >>> L3 >>> cache: >>> > 12288K CPU >>> > > 8/0x0 -> >>> > > > Node 0 >>> > > > > CPU: >>> > > > > > Unsupported number of >>> siblings 32 >>> installing >>> > Xen >>> > > timer for >>> > > > CPU 9 >>> > > > > > Initializing CPU#9 CPU: L1 I >>> cache: >>> 32K, L1 >>> > D >>> > > cache: 32K >>> > > > CPU: L2 >>> > > > > cache: >>> > > > > > 256K CPU: L3 cache: 12288K >>> CPU 9/0x0 >>> -> Node >>> > 0 CPU: >>> > > > Unsupported >>> > > > > number >>> > > > > > of siblings 32 installing Xen >>> timer >>> for CPU >>> > 10 >>> > > > Initializing >>> > > > > CPU#10 CPU: >>> > > > > > L1 I cache: 32K, L1 D cache: >>> 32K CPU: >>> L2 >>> > cache: >>> > > 256K CPU: >>> > > > L3 >>> > > > > cache: >>> > > > > > 12288K CPU 10/0x0 -> Node 0 >>> CPU: >>> Unsupported >>> > number >>> > > of >>> > > > siblings >>> > > > > 32 >>> > > > > > installing Xen timer for CPU >>> 11 >>> Initializing >>> > CPU#11 >>> > > CPU: >>> > > > L1 I >>> > > > > cache: >>> > > > > > 32K, L1 D cache: 32K CPU: L2 >>> cache: >>> 256K >>> > CPU: L3 >>> > > cache: >>> > > > 12288K >>> > > > > CPU >>> > > > > > 11/0x0 -> Node 0 CPU: >>> Unsupported >>> number of >>> > > siblings 32 >>> > > > Brought >>> > > > > up 12 >>> > > > > > CPUs Grant table initialized >>> regulator: core >>> > > version 0.5 >>> > > > Time: >>> > > > > 14:45:00 >>> > > > > > Date: 03/16/10 NET: >>> Registered >>> protocol >>> > family 16 >>> > > > > xenbus_probe_init ok >>> > > > > > ACPI FADT declares the system >>> doesn't >>> > support PCIe >>> > > ASPM, >>> > > > so >>> > > > > disable it >>> > > > > > ACPI: bus type pci registered >>> PCI: >>> MCFG >>> > > configuration 0: >>> > > > base >>> > > > > a0000000 >>> > > > > > segment 0 buses 0 - 255 PCI: >>> MCFG >>> area at >>> > a0000000 >>> > > > reserved in >>> > > > > E820 PCI: >>> > > > > > Using MMCONFIG at a0000000 - >>> afffffff >>> PCI: >>> > Using >>> > > > configuration >>> > > > > type 1 >>> > > > > > for base access bio: create >>> slab >>> <bio-0> at >>> > 0 ACPI >>> > > Error: >>> > > > Field >>> > > > > [CPB3] >>> > > > > > at 96 exceeds Buffer [NULL] >>> size 64 >>> (bits) >>> > > > > (20090903/dsopcode-596) ACPI >>> > > > > > Error (psparse-0537): Method >>> parse/execution >>> > failed >>> > > > [\_SB_._OSC] >>> > > > > (Node >>> > > > > > ffff880064e00c98), >>> AE_AML_BUFFER_LIMIT ACPI: >>> > > Interpreter >>> > > > enabled >>> > > > > ACPI: >>> > > > > > (supports S0 S1 S3 S4 S5) >>> ACPI: Using >>> IOAPIC >>> > for >>> > > interrupt >>> > > > > routing ACPI >>> > > > > > Warning: Incorrect checksum >>> in table >>> [ ] >>> > - 97, >>> > > should >>> > > > be DB >>> > > > > > (20090903/tbutils-314) ACPI: >>> No dock >>> devices >>> > found. >>> > > ACPI: >>> > > > PCI >>> > > > > Root >>> > > > > > Bridge [PCI0] (0000:00) pci >>> 0000:00:01.0: >>> > PME# >>> > > supported >>> > > > from D0 >>> > > > > D3hot >>> > > > > > D3cold pci 0000:00:01.0: PME# >>> disabled pci >>> > > 0000:00:02.0: >>> > > > PME# >>> > > > > supported >>> > > > > > from D0 D3hot D3cold pci >>> 0000:00:02.0: PME# >>> > > disabled pci >>> > > > > 0000:00:03.0: >>> > > > > > PME# supported from D0 D3hot >>> D3cold >>> pci >>> > > 0000:00:03.0: PME# >>> > > > > disabled pci >>> > > > > > 0000:00:04.0: PME# supported >>> from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:04.0: PME# >>> > > > > > disabled pci 0000:00:05.0: >>> PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:00:05.0: PME# disabled >>> pci >>> > 0000:00:06.0: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci >>> 0000:00:06.0: PME# >>> disabled >>> > pci >>> > > > 0000:00:07.0: >>> > > > > PME# >>> > > > > > supported from D0 D3hot >>> D3cold pci >>> > 0000:00:07.0: >>> > > PME# >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:08.0: PME# supported >>> from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:08.0: PME# >>> > > > > > disabled pci 0000:00:09.0: >>> PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:00:09.0: PME# disabled >>> pci >>> > 0000:00:0a.0: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci >>> 0000:00:0a.0: PME# >>> disabled >>> > pci >>> > > > 0000:00:13.0: >>> > > > > PME# >>> > > > > > supported from D0 D3hot >>> D3cold pci >>> > 0000:00:13.0: >>> > > PME# >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:1a.7: PME# supported >>> from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:1a.7: PME# >>> > > > > > disabled pci 0000:00:1c.0: >>> PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:00:1c.0: PME# disabled >>> pci >>> > 0000:00:1c.4: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci >>> 0000:00:1c.4: PME# >>> disabled >>> > pci >>> > > > 0000:00:1c.5: >>> > > > > PME# >>> > > > > > supported from D0 D3hot >>> D3cold pci >>> > 0000:00:1c.5: >>> > > PME# >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:1d.7: PME# supported >>> from D0 >>> D3hot >>> > D3cold >>> > > pci >>> > > > > 0000:00:1d.7: PME# >>> > > > > > disabled pci 0000:00:1f.0: >>> quirk: >>> region >>> > 0400-047f >>> > > claimed >>> > > > by >>> > > > > ICH6 >>> > > > > > ACPI/GPIO/TCO pci >>> 0000:00:1f.0: >>> quirk: >>> > region >>> > > 0500-053f >>> > > > claimed >>> > > > > by ICH6 >>> > > > > > GPIO pci 0000:00:1f.0: ICH7 >>> LPC >>> Generic IO >>> > decode 1 >>> > > PIO at >>> > > > 0680 >>> > > > > (mask >>> > > > > > 000f) pci 0000:00:1f.0: ICH7 >>> LPC >>> Generic IO >>> > decode >>> > > 2 PIO >>> > > > at 0ca0 >>> > > > > (mask >>> > > > > > 000f) pci 0000:00:1f.0: ICH7 >>> LPC >>> Generic IO >>> > decode >>> > > 3 PIO >>> > > > at 0600 >>> > > > > (mask >>> > > > > > 001f) pci 0000:00:1f.2: PME# >>> supported from >>> > D3hot >>> > > pci >>> > > > > 0000:00:1f.2: PME# >>> > > > > > disabled pci 0000:01:00.0: >>> PME# >>> supported >>> > from D0 >>> > > D3hot >>> > > > D3cold >>> > > > > pci >>> > > > > > 0000:01:00.0: PME# disabled >>> pci >>> > 0000:01:00.1: PME# >>> > > > supported from >>> > > > > D0 >>> > > > > > D3hot D3cold pci >>> 0000:01:00.1: PME# >>> disabled >>> > pci >>> > > > 0000:0c:00.0: >>> > > > > disabling >>> > > > > > ASPM on pre-1.1 PCIe device. >>> You can >>> enable >>> > it >>> > > with >>> > > > > 'pcie_aspm=force' >>> > > > > > pci 0000:00:1e.0: transparent >>> bridge >>> ACPI: >>> > PCI Root >>> > > Bridge >>> > > > [PCI1] >>> > > > > > (0000:fe) ACPI: PCI Root >>> Bridge >>> [PCI2] >>> > (0000:ff) >>> > > ACPI: PCI >>> > > > > Interrupt >>> > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 >>> 10 *11 >>> 12 14 >>> > 15) >>> > > ACPI: PCI >>> > > > > Interrupt Link >>> > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 >>> 11 12 14 >>> 15) >>> > ACPI: PCI >>> > > > Interrupt >>> > > > > Link >>> > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 >>> 11 12 14 >>> 15) >>> > ACPI: PCI >>> > > > Interrupt >>> > > > > Link >>> > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 >>> 11 12 14 >>> 15) >>> > ACPI: PCI >>> > > > Interrupt >>> > > > > Link >>> > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 >>> 11 12 14 >>> 15) *0, >>> > > disabled. >>> > > > ACPI: PCI >>> > > > > > Interrupt Link [LNKF] (IRQs 3 >>> 4 5 6 7 >>> 9 10 >>> > *11 12 >>> > > 14 15) >>> > > > ACPI: >>> > > > > PCI >>> > > > > > Interrupt Link [LNKG] (IRQs 3 >>> 4 5 6 7 >>> 9 10 >>> > 11 12 14 >>> > > 15) >>> > > > *0, >>> > > > > disabled. >>> > > > > > ACPI: PCI Interrupt Link >>> [LNKH] (IRQs >>> 3 4 5 >>> > 6 7 9 >>> > > *10 11 >>> > > > 12 14 >>> > > > > 15) >>> > > > > > xenbus_probe_backend_init bus >>> registered ok >>> > > > > xenbus_probe_frontend_init >>> > > > > > bus registered ok xen_balloon: >>> Initialising >>> > balloon >>> > > driver >>> > > > with >>> > > > > page >>> > > > > > order 0. vgaarb: device added: >>> > > > > > >>> > > >>> PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none >>> > > > vgaarb: >>> > > > > loaded >>> > > > > > SCSI subsystem initialized >>> usbcore: >>> > registered new >>> > > > interface >>> > > > > driver >>> > > > > > usbfs usbcore: registered new >>> interface >>> > driver hub >>> > > > usbcore: >>> > > > > registered >>> > > > > > new device driver usb PCI: >>> Using ACPI >>> for >>> > IRQ >>> > > routing >>> > > > NetLabel: >>> > > > > > Initializing NetLabel: >>> domain hash >>> size = >>> > 128 >>> > > NetLabel: >>> > > > > protocols = >>> > > > > > UNLABELED CIPSOv4 NetLabel: >>> unlabeled >>> > traffic >>> > > allowed by >>> > > > default >>> > > > > > Switching to clocksource xen >>> kstop/0 >>> used >>> > greatest >>> > > stack >>> > > > depth: >>> > > > > 6568 >>> > > > > > bytes left kstop/1 used >>> greatest >>> stack >>> > depth: 6536 >>> > > bytes >>> > > > left >>> > > > > pnp: PnP >>> > > > > > ACPI init ACPI: bus type pnp >>> registered >>> > > xen_allocate_pirq: >>> > > > > returning irq >>> > > > > > 8 for gsi 8 Already setup the >>> GSI :8 >>> > > xen_allocate_pirq: >>> > > > returning >>> > > > > irq 13 >>> > > > > > for gsi 13 Already setup the >>> GSI :13 >>> pnp: >>> > PnP ACPI: >>> > > found >>> > > > 13 >>> > > > > devices >>> > > > > > ACPI: ACPI bus type pnp >>> unregistered >>> system >>> > 00:07: >>> > > ioport >>> > > > range >>> > > > > > 0x500-0x53f has been reserved >>> system >>> 00:07: >>> > ioport >>> > > range >>> > > > > 0x400-0x47f has >>> > > > > > been reserved system 00:07: >>> ioport >>> range >>> > > 0x800-0x81f has >>> > > > been >>> > > > > reserved >>> > > > > > system 00:07: ioport range >>> 0x2f8-0x2ff has >>> > been >>> > > reserved >>> > > > system >>> > > > > 00:07: >>> > > > > > iomem range >>> 0xfed1c000-0xfed8bffe >>> could not >>> > be >>> > > reserved >>> > > > system >>> > > > > 00:07: >>> > > > > > iomem range >>> 0xff000000-0xffffffff >>> could not >>> > be >>> > > reserved >>> > > > system >>> > > > > 00:07: >>> > > > > > iomem range >>> 0xfee00000-0xfeefffff has >>> been >>> > reserved >>> > > system >>> > > > 00:07: >>> > > > > iomem >>> > > > > > range 0xfe900000-0xfe90001f >>> has been >>> > reserved >>> > > system >>> > > > 00:07: iomem >>> > > > > range >>> > > > > > 0xfea00000-0xfea0001f has been >>> reserved >>> > system >>> > > 00:07: >>> > > > iomem range >>> > > > > > 0xfed1b000-0xfed1bfff has been >>> reserved pci >>> > > 0000:0c:00.0: >>> > > > BAR 6: >>> > > > > no >>> > > > > > parent found for of device >>> > [0xffff0000-0xffffffff] >>> > > pci >>> > > > > 0000:00:01.0: PCI >>> > > > > > bridge, secondary bus 0000:01 >>> pci >>> > 0000:00:01.0: >>> > > IO >>> > > > window: >>> > > > > > 0x1000-0x1fff pci >>> 0000:00:01.0: MEM >>> > window: >>> > > > > 0xb1900000-0xb19fffff pci >>> > > > > > 0000:00:01.0: PREFETCH >>> window: >>> disabled >>> > pci >>> > > > 0000:00:02.0: PCI >>> > > > > bridge, >>> > > > > > secondary bus 0000:02 pci >>> 0000:00:02.0: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:02.0: MEM window: >>> disabled >>> pci >>> > > 0000:00:02.0: >>> > > > PREFETCH >>> > > > > > window: disabled pci >>> 0000:00:03.0: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:03 pci >>> > > > > > 0000:00:03.0: IO window: >>> disabled >>> pci >>> > > 0000:00:03.0: >>> > > > MEM >>> > > > > window: >>> > > > > > disabled pci 0000:00:03.0: >>> PREFETCH >>> > window: >>> > > disabled pci >>> > > > > 0000:00:04.0: >>> > > > > > PCI bridge, secondary bus >>> 0000:04 pci >>> > 0000:00:04.0: >>> > > IO >>> > > > window: >>> > > > > > disabled pci 0000:00:04.0: >>> MEM >>> window: >>> > disabled >>> > > pci >>> > > > > 0000:00:04.0: >>> > > > > > PREFETCH window: disabled pci >>> 0000:00:05.0: >>> > PCI >>> > > bridge, >>> > > > secondary >>> > > > > bus >>> > > > > > 0000:05 pci 0000:00:05.0: IO >>> window: >>> > disabled pci >>> > > > 0000:00:05.0: >>> > > > > MEM >>> > > > > > window: disabled pci >>> 0000:00:05.0: >>> > PREFETCH >>> > > window: >>> > > > disabled >>> > > > > pci >>> > > > > > 0000:00:06.0: PCI bridge, >>> secondary >>> bus >>> > 0000:06 pci >>> > > > 0000:00:06.0: >>> > > > > IO >>> > > > > > window: disabled pci >>> 0000:00:06.0: >>> MEM >>> > window: >>> > > disabled >>> > > > pci >>> > > > > > 0000:00:06.0: PREFETCH >>> window: >>> disabled >>> > pci >>> > > > 0000:00:07.0: PCI >>> > > > > bridge, >>> > > > > > secondary bus 0000:07 pci >>> 0000:00:07.0: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:07.0: MEM window: >>> disabled >>> pci >>> > > 0000:00:07.0: >>> > > > PREFETCH >>> > > > > > window: disabled pci >>> 0000:00:08.0: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:08 pci >>> > > > > > 0000:00:08.0: IO window: >>> disabled >>> pci >>> > > 0000:00:08.0: >>> > > > MEM >>> > > > > window: >>> > > > > > disabled pci 0000:00:08.0: >>> PREFETCH >>> > window: >>> > > disabled pci >>> > > > > 0000:00:09.0: >>> > > > > > PCI bridge, secondary bus >>> 0000:09 pci >>> > 0000:00:09.0: >>> > > IO >>> > > > window: >>> > > > > > 0x3000-0x3fff pci >>> 0000:00:09.0: MEM >>> > window: >>> > > > > 0xb1b00000-0xb1cfffff pci >>> > > > > > 0000:00:09.0: PREFETCH >>> window: >>> > > > > 0x000000b1d00000-0x000000b1efffff pci >>> > > > > > 0000:00:0a.0: PCI bridge, >>> secondary >>> bus >>> > 0000:0a pci >>> > > > 0000:00:0a.0: >>> > > > > IO >>> > > > > > window: disabled pci >>> 0000:00:0a.0: >>> MEM >>> > window: >>> > > disabled >>> > > > pci >>> > > > > > 0000:00:0a.0: PREFETCH >>> window: >>> disabled >>> > pci >>> > > > 0000:00:1c.0: PCI >>> > > > > bridge, >>> > > > > > secondary bus 0000:0b pci >>> 0000:00:1c.0: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:1c.0: MEM window: >>> disabled >>> pci >>> > > 0000:00:1c.0: >>> > > > PREFETCH >>> > > > > > window: disabled pci >>> 0000:00:1c.4: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:0c pci >>> > > > > > 0000:00:1c.4: IO window: >>> disabled >>> pci >>> > > 0000:00:1c.4: >>> > > > MEM >>> > > > > window: >>> > > > > > 0xb1000000-0xb18fffff pci >>> 0000:00:1c.4: >>> > PREFETCH >>> > > window: >>> > > > > > >>> 0x000000b0000000-0x000000b0ffffff pci >>> > 0000:00:1c.5: >>> > > PCI >>> > > > bridge, >>> > > > > > secondary bus 0000:0d pci >>> 0000:00:1c.5: IO >>> > > window: >>> > > > disabled pci >>> > > > > > 0000:00:1c.5: MEM window: >>> disabled >>> pci >>> > > 0000:00:1c.5: >>> > > > PREFETCH >>> > > > > > window: disabled pci >>> 0000:00:1e.0: >>> PCI >>> > bridge, >>> > > secondary >>> > > > bus >>> > > > > 0000:0e pci >>> > > > > > 0000:00:1e.0: IO window: >>> disabled >>> pci >>> > > 0000:00:1e.0: >>> > > > MEM >>> > > > > window: >>> > > > > > disabled pci 0000:00:1e.0: >>> PREFETCH >>> > window: >>> > > disabled pci >>> > > > > 0000:00:01.0: >>> > > > > > PCI INT A -> GSI 28 (level, >>> low) -> >>> IRQ 28 >>> > pci >>> > > > 0000:00:02.0: PCI >>> > > > > INT A >>> > > > > > -> GSI 29 (level, low) -> >>> IRQ 29 pci >>> > 0000:00:03.0: >>> > > PCI INT >>> > > > A -> >>> > > > > GSI 24 >>> > > > > > (level, low) -> IRQ 24 pci >>> 0000:00:04.0: PCI >>> > INT A >>> > > -> GSI >>> > > > 25 >>> > > > > (level, >>> > > > > > low) -> IRQ 25 pci >>> 0000:00:05.0: PCI >>> INT A >>> > -> GSI >>> > > 26 >>> > > > (level, low) >>> > > > > -> IRQ >>> > > > > > 26 pci 0000:00:06.0: PCI INT >>> A -> GSI >>> 27 >>> > (level, >>> > > low) -> >>> > > > IRQ 27 >>> > > > > pci >>> > > > > > 0000:00:07.0: PCI INT A -> >>> GSI 30 >>> (level, >>> > low) -> >>> > > IRQ 30 >>> > > > pci >>> > > > > > 0000:00:08.0: PCI INT A -> >>> GSI 31 >>> (level, >>> > low) -> >>> > > IRQ 31 >>> > > > pci >>> > > > > > 0000:00:09.0: PCI INT A -> >>> GSI 32 >>> (level, >>> > low) -> >>> > > IRQ 32 >>> > > > pci >>> > > > > > 0000:00:0a.0: PCI INT A -> >>> GSI 33 >>> (level, >>> > low) -> >>> > > IRQ 33 >>> > > > pci >>> > > > > > 0000:00:1c.0: PCI INT A -> >>> GSI 16 >>> (level, >>> > low) -> >>> > > IRQ 16 >>> > > > > > xen_allocate_pirq: returning >>> irq 16 >>> for gsi >>> > 16 >>> > > Already >>> > > > setup the >>> > > > > GSI :16 >>> > > > > > pci 0000:00:1c.4: PCI INT A >>> -> GSI 16 >>> > (level, low) >>> > > -> IRQ >>> > > > 16 pci >>> > > > > > 0000:00:1c.5: PCI INT B -> >>> GSI 17 >>> (level, >>> > low) -> >>> > > IRQ 17 >>> > > > NET: >>> > > > > Registered >>> > > > > > protocol family 2 IP route >>> cache hash >>> table >>> > > entries: 65536 >>> > > > > (order: 7, >>> > > > > > 524288 bytes) TCP established >>> hash >>> table >>> > entries: >>> > > 262144 >>> > > > (order: >>> > > > > 10, >>> > > > > > 4194304 bytes) TCP bind hash >>> table >>> entries: >>> > 65536 >>> > > (order: >>> > > > 10, >>> > > > > 4718592 >>> > > > > > bytes) TCP: Hash tables >>> configured >>> > (established >>> > > 262144 >>> > > > bind >>> > > > > 65536) TCP >>> > > > > > reno registered NET: >>> Registered >>> protocol >>> > family 1 >>> > > pci >>> > > > > 0000:01:00.0: >>> > > > > > Disabling L0s pci >>> 0000:01:00.1: >>> Disabling >>> > L0s >>> > > Trying to >>> > > > unpack >>> > > > > rootfs >>> > > > > > image as initramfs... Freeing >>> initrd >>> memory: >>> > 6474k >>> > > freed >>> > > > DMA-API: >>> > > > > > preallocated 32768 debug >>> entries >>> DMA-API: >>> > debugging >>> > > > enabled by >>> > > > > kernel >>> > > > > > config PCI-DMA: Using >>> software bounce >>> > buffering for >>> > > IO >>> > > > (SWIOTLB) >>> > > > > DMA: >>> > > > > > Placing 64MB software IO TLB >>> between >>> > > ffff880007525000 - >>> > > > > ffff88000b525000 >>> > > > > > DMA: software IO TLB at phys >>> 0x7525000 - >>> > 0xb525000 >>> > > audit: >>> > > > > initializing >>> > > > > > netlink socket (disabled) >>> type=2000 >>> > > > audit(1268750702.035:1): >>> > > > > initialized >>> > > > > > HugeTLB registered 2 MB page >>> size, >>> > pre-allocated 0 >>> > > pages >>> > > > VFS: >>> > > > > Disk >>> > > > > > quotas dquot_6.5.2 >>> Dquot-cache hash >>> table >>> > entries: >>> > > 512 >>> > > > (order 0, >>> > > > > 4096 >>> > > > > > bytes) msgmni has been set to >>> 2970 >>> > cryptomgr_test >>> > > used >>> > > > greatest >>> > > > > stack >>> > > > > > depth: 5864 bytes left >>> cryptomgr_test >>> used >>> > greatest >>> > > stack >>> > > > depth: >>> > > > > 5816 >>> > > > > > bytes left alg: No test for >>> stdrng >>> (krng) >>> > Block >>> > > layer SCSI >>> > > > > generic (bsg) >>> > > > > > driver version 0.4 loaded >>> (major 252) >>> io >>> > scheduler >>> > > noop >>> > > > > registered io >>> > > > > > scheduler anticipatory >>> registered io >>> > scheduler >>> > > deadline >>> > > > > registered io >>> > > > > > scheduler cfq registered >>> (default) >>> > pci_hotplug: PCI >>> > > Hot >>> > > > Plug PCI >>> > > > > Core >>> > > > > > version: 0.5 pciehp >>> 0000:00:09.0:pcie04: HPC >>> > > vendor_id >>> > > > 8086 >>> > > > > device_id >>> > > > > > 3410 ss_vid 0 ss_did 0 >>> pciehp: PCI >>> Express >>> > Hot Plug >>> > > > Controller >>> > > > > Driver >>> > > > > > version: 0.4 acpiphp: ACPI >>> Hot Plug >>> PCI >>> > Controller >>> > > Driver >>> > > > > version: 0.5 >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > acpiphp_glue: Slot 2 already >>> registered by >>> > another >>> > > hotplug >>> > > > driver >>> > > > > > pci-stub: invalid id string >>> "" input: >>> Sleep >>> > Button >>> > > as >>> > > > > > >>> > > >>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 >>> > > > ACPI: >>> > > > > Sleep >>> > > > > > Button [SLPB] input: Power >>> Button as >>> > > > > > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: >>> > > Power >>> > > > Button >>> > > > > [PWRF] >>> > > > > > registering netback >>> hpet_acpi_add: no >>> > address or >>> > > irqs in >>> > > > _CRS >>> > > > > > Non-volatile memory driver >>> v1.3 Linux >>> > agpgart >>> > > interface >>> > > > v0.103 >>> > > > > Serial: >>> > > > > > 8250/16550 driver, 4 ports, >>> IRQ >>> sharing >>> > enabled >>> > > > serial8250: ttyS1 >>> > > > > at I/O >>> > > > > > 0x2f8 (irq = 3) is a 16550A >>> brd: >>> module >>> > loaded >>> > > loop: >>> > > > module >>> > > > > loaded >>> > > > > > input: Macintosh mouse button >>> emulation as >>> > > > > /devices/virtual/input/input2 >>> > > > > > ahci 0000:00:1f.2: PCI INT A >>> -> GSI >>> 19 >>> > (level, low) >>> > > -> IRQ >>> > > > 19 >>> > > > > ahci >>> > > > > > 0000:00:1f.2: AHCI 0001.0200 >>> 32 slots >>> 6 >>> > ports 3 >>> > > Gbps 0x3f >>> > > > impl >>> > > > > SATA mode >>> > > > > > ahci 0000:00:1f.2: flags: >>> 64bit ncq >>> sntf pm >>> > led clo >>> > > pio >>> > > > slum part >>> > > > > ccc >>> > > > > > ems scsi0 : ahci scsi1 : >>> ahci scsi2 >>> : ahci >>> > scsi3 : >>> > > ahci >>> > > > scsi4 : >>> > > > > ahci >>> > > > > > scsi5 : ahci ata1: SATA max >>> UDMA/133 >>> > irq_stat >>> > > 0x00400040, >>> > > > > connection >>> > > > > > status changed irq 2996 ata2: >>> SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00180 irq 2996 >>> ata3: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00200 irq 2996 >>> ata4: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00280 irq 2996 >>> ata5: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00300 irq 2996 >>> ata6: SATA >>> max >>> > UDMA/133 >>> > > abar >>> > > > > m2048@0xb1a00000 >>> > > > > > port 0xb1a00380 irq 2996 >>> Fixed MDIO >>> Bus: >>> > probed >>> > > ehci_hcd: >>> > > > USB 2.0 >>> > > > > > 'Enhanced' Host Controller >>> (EHCI) >>> Driver >>> > ehci_hcd >>> > > > 0000:00:1a.7: >>> > > > > PCI INT >>> > > > > > C -> GSI 18 (level, low) -> >>> IRQ 18 >>> ehci_hcd >>> > > 0000:00:1a.7: >>> > > > EHCI >>> > > > > Host >>> > > > > > Controller ehci_hcd >>> 0000:00:1a.7: new >>> USB >>> > bus >>> > > registered, >>> > > > > assigned bus >>> > > > > > number 1 ehci_hcd >>> 0000:00:1a.7: debug >>> port 1 >>> > > ehci_hcd >>> > > > > 0000:00:1a.7: irq >>> > > > > > 18, io mem 0xb1a02000 ehci_hcd >>> 0000:00:1a.7: >>> > USB >>> > > 2.0 >>> > > > started, >>> > > > > EHCI 1.00 >>> > > > > > usb usb1: New USB device >>> found, >>> > idVendor=1d6b, >>> > > > idProduct=0002 usb >>> > > > > usb1: >>> > > > > > New USB device strings: Mfr=3, >>> Product=2, >>> > > SerialNumber=1 >>> > > > usb >>> > > > > usb1: >>> > > > > > Product: EHCI Host Controller >>> usb >>> usb1: >>> > > Manufacturer: >>> > > > Linux >>> > > > > 2.6.32.9 >>> > > > > > ehci_hcd usb usb1: >>> SerialNumber: >>> > 0000:00:1a.7 usb >>> > > usb1: >>> > > > > configuration #1 >>> > > > > > chosen from 1 choice hub >>> 1-0:1.0: USB >>> hub >>> > found hub >>> > > > 1-0:1.0: 6 >>> > > > > ports >>> > > > > > detected ehci_hcd >>> 0000:00:1d.7: PCI >>> INT A -> >>> > GSI 23 >>> > > > (level, low) >>> > > > > -> IRQ >>> > > > > > 23 ehci_hcd 0000:00:1d.7: >>> EHCI Host >>> > Controller >>> > > ehci_hcd >>> > > > > 0000:00:1d.7: >>> > > > > > new USB bus registered, >>> assigned bus >>> number >>> > 2 >>> > > ehci_hcd >>> > > > > 0000:00:1d.7: >>> > > > > > debug port 1 ehci_hcd >>> 0000:00:1d.7: >>> irq 23, >>> > io mem >>> > > > 0xb1a01000 >>> > > > > ehci_hcd >>> > > > > > 0000:00:1d.7: USB 2.0 >>> started, EHCI >>> 1.00 usb >>> > usb2: >>> > > New USB >>> > > > device >>> > > > > found, >>> > > > > > idVendor=1d6b, idProduct=0002 >>> usb >>> usb2: New >>> > USB >>> > > device >>> > > > strings: >>> > > > > Mfr=3, >>> > > > > > Product=2, SerialNumber=1 usb >>> usb2: >>> Product: >>> > EHCI >>> > > Host >>> > > > Controller >>> > > > > usb >>> > > > > > usb2: Manufacturer: Linux >>> 2.6.32.9 >>> ehci_hcd >>> > usb >>> > > usb2: >>> > > > > SerialNumber: >>> > > > > > 0000:00:1d.7 usb usb2: >>> configuration >>> #1 >>> > chosen from >>> > > 1 >>> > > > choice hub >>> > > > > > 2-0:1.0: USB hub found hub >>> 2-0:1.0: 6 >>> ports >>> > > detected >>> > > > ohci_hcd: >>> > > > > USB 1.1 >>> > > > > > 'Open' Host Controller (OHCI) >>> Driver >>> > uhci_hcd: USB >>> > > > Universal Host >>> > > > > > Controller Interface driver >>> > xen_allocate_pirq: >>> > > returning >>> > > > irq 16 >>> > > > > for gsi >>> > > > > > 16 Already setup the GSI :16 >>> uhci_hcd >>> > 0000:00:1a.0: >>> > > PCI >>> > > > INT A -> >>> > > > > GSI 16 >>> > > > > > (level, low) -> IRQ 16 >>> uhci_hcd >>> > 0000:00:1a.0: UHCI >>> > > Host >>> > > > > Controller >>> > > > > > uhci_hcd 0000:00:1a.0: new >>> USB bus >>> > registered, >>> > > assigned >>> > > > bus >>> > > > > number 3 >>> > > > > > uhci_hcd 0000:00:1a.0: irq >>> 16, io >>> base >>> > 0x000020e0 >>> > > usb >>> > > > usb3: New >>> > > > > USB >>> > > > > > device found, idVendor=1d6b, >>> idProduct=0001 >>> > usb >>> > > usb3: New >>> > > > USB >>> > > > > device >>> > > > > > strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> > usb usb3: >>> > > > Product: UHCI >>> > > > > Host >>> > > > > > Controller usb usb3: >>> Manufacturer: >>> Linux >>> > 2.6.32.9 >>> > > uhci_hcd >>> > > > usb >>> > > > > usb3: >>> > > > > > SerialNumber: 0000:00:1a.0 >>> usb usb3: >>> > configuration >>> > > #1 >>> > > > chosen from >>> > > > > 1 >>> > > > > > choice hub 3-0:1.0: USB hub >>> found hub >>> > 3-0:1.0: 2 >>> > > ports >>> > > > detected >>> > > > > uhci_hcd >>> > > > > > 0000:00:1a.1: PCI INT B -> >>> GSI 21 >>> (level, >>> > low) -> >>> > > IRQ 21 >>> > > > uhci_hcd >>> > > > > > 0000:00:1a.1: UHCI Host >>> Controller >>> uhci_hcd >>> > > 0000:00:1a.1: >>> > > > new USB >>> > > > > bus >>> > > > > > registered, assigned bus >>> number 4 >>> uhci_hcd >>> > > 0000:00:1a.1: >>> > > > irq 21, >>> > > > > io base >>> > > > > > 0x000020c0 usb usb4: New USB >>> device >>> found, >>> > > idVendor=1d6b, >>> > > > > idProduct=0001 >>> > > > > > usb usb4: New USB device >>> strings: >>> Mfr=3, >>> > Product=2, >>> > > > > SerialNumber=1 usb >>> > > > > > usb4: Product: UHCI Host >>> Controller >>> usb >>> > usb4: >>> > > > Manufacturer: Linux >>> > > > > > 2.6.32.9 uhci_hcd usb usb4: >>> SerialNumber: >>> > > 0000:00:1a.1 usb >>> > > > usb4: >>> > > > > > configuration #1 chosen from >>> 1 choice >>> hub >>> > 4-0:1.0: >>> > > USB hub >>> > > > found >>> > > > > hub >>> > > > > > 4-0:1.0: 2 ports detected >>> xen_allocate_pirq: >>> > > returning irq >>> > > > 19 for >>> > > > > gsi 19 >>> > > > > > Already setup the GSI :19 >>> uhci_hcd >>> > 0000:00:1a.2: >>> > > PCI INT D >>> > > > -> GSI >>> > > > > 19 >>> > > > > > (level, low) -> IRQ 19 >>> uhci_hcd >>> > 0000:00:1a.2: UHCI >>> > > Host >>> > > > > Controller >>> > > > > > uhci_hcd 0000:00:1a.2: new >>> USB bus >>> > registered, >>> > > assigned >>> > > > bus >>> > > > > number 5 >>> > > > > > uhci_hcd 0000:00:1a.2: irq >>> 19, io >>> base >>> > 0x000020a0 >>> > > usb >>> > > > usb5: New >>> > > > > USB >>> > > > > > device found, idVendor=1d6b, >>> idProduct=0001 >>> > usb >>> > > usb5: New >>> > > > USB >>> > > > > device >>> > > > > > strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> > usb usb5: >>> > > > Product: UHCI >>> > > > > Host >>> > > > > > Controller usb usb5: >>> Manufacturer: >>> Linux >>> > 2.6.32.9 >>> > > uhci_hcd >>> > > > usb >>> > > > > usb5: >>> > > > > > SerialNumber: 0000:00:1a.2 >>> usb usb5: >>> > configuration >>> > > #1 >>> > > > chosen from >>> > > > > 1 >>> > > > > > choice hub 5-0:1.0: USB hub >>> found hub >>> > 5-0:1.0: 2 >>> > > ports >>> > > > detected >>> > > > > > xen_allocate_pirq: returning >>> irq 23 >>> for gsi >>> > 23 >>> > > Already >>> > > > setup the >>> > > > > GSI :23 >>> > > > > > uhci_hcd 0000:00:1d.0: PCI >>> INT A -> >>> GSI 23 >>> > (level, >>> > > low) -> >>> > > > IRQ 23 >>> > > > > > uhci_hcd 0000:00:1d.0: UHCI >>> Host >>> Controller >>> > > uhci_hcd >>> > > > > 0000:00:1d.0: new >>> > > > > > USB bus registered, assigned >>> bus >>> number 6 >>> > uhci_hcd >>> > > > 0000:00:1d.0: >>> > > > > irq 23, >>> > > > > > io base 0x00002080 usb usb6: >>> New USB >>> device >>> > found, >>> > > > idVendor=1d6b, >>> > > > > > idProduct=0001 usb usb6: New >>> USB >>> device >>> > strings: >>> > > Mfr=3, >>> > > > > Product=2, >>> > > > > > SerialNumber=1 usb usb6: >>> Product: >>> UHCI Host >>> > > Controller usb >>> > > > usb6: >>> > > > > > Manufacturer: Linux 2.6.32.9 >>> uhci_hcd >>> usb >>> > usb6: >>> > > > SerialNumber: >>> > > > > > 0000:00:1d.0 usb usb6: >>> configuration >>> #1 >>> > chosen from >>> > > 1 >>> > > > choice hub >>> > > > > > 6-0:1.0: USB hub found hub >>> 6-0:1.0: 2 >>> ports >>> > > detected >>> > > > > xen_allocate_pirq: >>> > > > > > returning irq 19 for gsi 19 >>> Already >>> setup >>> > the GSI >>> > > :19 >>> > > > uhci_hcd >>> > > > > > 0000:00:1d.1: PCI INT B -> >>> GSI 19 >>> (level, >>> > low) -> >>> > > IRQ 19 >>> > > > uhci_hcd >>> > > > > > 0000:00:1d.1: UHCI Host >>> Controller >>> uhci_hcd >>> > > 0000:00:1d.1: >>> > > > new USB >>> > > > > bus >>> > > > > > registered, assigned bus >>> number 7 >>> uhci_hcd >>> > > 0000:00:1d.1: >>> > > > irq 19, >>> > > > > io base >>> > > > > > 0x00002060 usb usb7: New USB >>> device >>> found, >>> > > idVendor=1d6b, >>> > > > > idProduct=0001 >>> > > > > > usb usb7: New USB device >>> strings: >>> Mfr=3, >>> > Product=2, >>> > > > > SerialNumber=1 usb >>> > > > > > usb7: Product: UHCI Host >>> Controller >>> usb >>> > usb7: >>> > > > Manufacturer: Linux >>> > > > > > 2.6.32.9 uhci_hcd usb usb7: >>> SerialNumber: >>> > > 0000:00:1d.1 usb >>> > > > usb7: >>> > > > > > configuration #1 chosen from >>> 1 choice >>> hub >>> > 7-0:1.0: >>> > > USB hub >>> > > > found >>> > > > > hub >>> > > > > > 7-0:1.0: 2 ports detected >>> xen_allocate_pirq: >>> > > returning irq >>> > > > 18 for >>> > > > > gsi 18 >>> > > > > > Already setup the GSI :18 >>> uhci_hcd >>> > 0000:00:1d.2: >>> > > PCI INT C >>> > > > -> GSI >>> > > > > 18 >>> > > > > > (level, low) -> IRQ 18 >>> uhci_hcd >>> > 0000:00:1d.2: UHCI >>> > > Host >>> > > > > Controller >>> > > > > > uhci_hcd 0000:00:1d.2: new >>> USB bus >>> > registered, >>> > > assigned >>> > > > bus >>> > > > > number 8 >>> > > > > > uhci_hcd 0000:00:1d.2: irq >>> 18, io >>> base >>> > 0x00002040 >>> > > usb >>> > > > usb8: New >>> > > > > USB >>> > > > > > device found, idVendor=1d6b, >>> idProduct=0001 >>> > usb >>> > > usb8: New >>> > > > USB >>> > > > > device >>> > > > > > strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> > usb usb8: >>> > > > Product: UHCI >>> > > > > Host >>> > > > >>> > > >>> > > References >>> > > >>> > > Visible links >>> > > 1. mailto:[20][21]pasik@xxxxxx >>> > > 2. mailto:[21][22]pasik@xxxxxx >>> > > 3. mailto:[22][23]pasik@xxxxxx >>> > > 4. mailto:[23][24]pasik@xxxxxx >>> > > 5. mailto:[24][25]pasik@xxxxxx >>> > > 6. >>> > >>> [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 7. >>> > >>> >>> [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 8. mailto:[27][28]pasik@xxxxxx >>> > > 9. >>> > >>> [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 10. >>> > >>> >>> [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 11. mailto:[30][31]pasik@xxxxxx >>> > > 12. mailto:[31][32]pasik@xxxxxx >>> > > 13. >>> > >>> [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 14. >>> > >>> >>> [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 15. mailto:[34][35]pasik@xxxxxx >>> > > 16. >>> > >>> [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > > 17. >>> > >>> >>> [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > > 18. mailto:[37][38]pasik@xxxxxx >>> > >>> > References >>> > >>> > Visible links >>> > 1. mailto:[39]pasik@xxxxxx >>> > 2. mailto:[40]pasik@xxxxxx >>> > 3. mailto:[41]pasik@xxxxxx >>> > 4. mailto:[42]pasik@xxxxxx >>> > 5. mailto:[43]pasik@xxxxxx >>> > 6. mailto:[44]pasik@xxxxxx >>> > 7. >>> [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 8. >>> >>> [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 9. mailto:[47]pasik@xxxxxx >>> > 10. >>> [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 11. >>> >>> [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 12. mailto:[50]pasik@xxxxxx >>> > 13. mailto:[51]pasik@xxxxxx >>> > 14. >>> [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 15. >>> >>> [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 16. mailto:[54]pasik@xxxxxx >>> > 17. >>> [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 18. >>> >>> [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 19. mailto:[57]pasik@xxxxxx >>> > 20. mailto:[58]pasik@xxxxxx >>> > 21. mailto:[59]pasik@xxxxxx >>> > 22. mailto:[60]pasik@xxxxxx >>> > 23. mailto:[61]pasik@xxxxxx >>> > 24. mailto:[62]pasik@xxxxxx >>> > 25. >>> [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 26. >>> >>> [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 27. mailto:[65]pasik@xxxxxx >>> > 28. >>> [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 29. >>> >>> [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 30. mailto:[68]pasik@xxxxxx >>> > 31. mailto:[69]pasik@xxxxxx >>> > 32. >>> [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 33. >>> >>> [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 34. mailto:[72]pasik@xxxxxx >>> > 35. >>> [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> > 36. >>> >>> [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> > 37. mailto:[75]pasik@xxxxxx >>> >>> References >>> >>> Visible links >>> 1. mailto:pasik@xxxxxx >>> 2. mailto:pasik@xxxxxx >>> 3. mailto:pasik@xxxxxx >>> 4. mailto:pasik@xxxxxx >>> 5. mailto:pasik@xxxxxx >>> 6. mailto:pasik@xxxxxx >>> 7. mailto:pasik@xxxxxx >>> 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 9. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 10. mailto:pasik@xxxxxx >>> 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 12. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 13. mailto:pasik@xxxxxx >>> 14. mailto:pasik@xxxxxx >>> 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 16. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 17. mailto:pasik@xxxxxx >>> 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 19. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 20. mailto:pasik@xxxxxx >>> 21. mailto:pasik@xxxxxx >>> 22. mailto:pasik@xxxxxx >>> 23. mailto:pasik@xxxxxx >>> 24. mailto:pasik@xxxxxx >>> 25. mailto:pasik@xxxxxx >>> 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 27. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 28. mailto:pasik@xxxxxx >>> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 30. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 31. mailto:pasik@xxxxxx >>> 32. mailto:pasik@xxxxxx >>> 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 34. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 35. mailto:pasik@xxxxxx >>> 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 37. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 38. mailto:pasik@xxxxxx >>> 39. mailto:pasik@xxxxxx >>> 40. mailto:pasik@xxxxxx >>> 41. mailto:pasik@xxxxxx >>> 42. mailto:pasik@xxxxxx >>> 43. mailto:pasik@xxxxxx >>> 44. mailto:pasik@xxxxxx >>> 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 46. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 47. mailto:pasik@xxxxxx >>> 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 49. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 50. mailto:pasik@xxxxxx >>> 51. mailto:pasik@xxxxxx >>> 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 53. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 54. mailto:pasik@xxxxxx >>> 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 56. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 57. mailto:pasik@xxxxxx >>> 58. mailto:pasik@xxxxxx >>> 59. mailto:pasik@xxxxxx >>> 60. mailto:pasik@xxxxxx >>> 61. mailto:pasik@xxxxxx >>> 62. mailto:pasik@xxxxxx >>> 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 64. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 65. mailto:pasik@xxxxxx >>> 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 67. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 68. mailto:pasik@xxxxxx >>> 69. mailto:pasik@xxxxxx >>> 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 71. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 72. mailto:pasik@xxxxxx >>> 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >>> 74. >>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 >>> 75. mailto:pasik@xxxxxx >>> >> >> > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |