Re: [Xen-devel] domU guest for xcp 0.1.1

[Pasi Kärkkäinen <pasik@xxxxxx>]

On Sat, Mar 27, 2010 at 11:28:12AM -0700, Ritu kaur wrote:
>    Any inputs on this? I compiled xen/next kernel in Debian Lenny and booted
>    successfully as a domU(I am using same .config file which I used to build
>    under xcp-ddk). Looks to me xen/next doesn't work with xcp0.1.1.
> 

You need to re-generate the dom0 kernel initrd to match your kernel.
You cannot use the default xcp initrd image.

Please provide the full serial console boot log so we can troubleshoot it:
http://wiki.xensource.com/xenwiki/XenSerialConsole

-- Pasi

>    Thanks
> 
>    On Fri, Mar 26, 2010 at 12:11 PM, Ritu kaur <[1]ritu.kaur.us@[2]gmail.com>
>    wrote:
> 
>      Hi Pasi,
> 
>      Messages seen with not-working case
> 
>      
> /***********************************************************************************
>      kernel:/boot/xen.3.4.3.gz dom0-mem=752M lowmem-emergency-pool=1M
>      crashkernel=64M@32M console=comX vga=mode-0x0311
>      loading /boot/xen.3.4.3.gz..........
>      Module:/boot/vmlinuz-2.6.32 root=LABEL=root-mhycetek ro Xencons=hvc
>      console=hvc0 console=tty0 quiet vga=785 splash
>      Loading /boot/vmlinuz-2.6.32.........
>      Module:/boot/initrd-2.6-xen.img
>      Loading
>      
> /boot/initrd-2.6-xen.img...............................................................................................
>      Booting:MBI=0x00010120, entry=0x00100000
>      
> ***************************************************************************************/
> 
>      Screen is blank after these messages and system returns to BIOS setup.
> 
>      Messages seen with working case
>      
> /***********************************************************************************
>      kernel:/boot/xen.gz dom0-mem=752M lowmem-emergency-pool=1M
>      crashkernel=64M@32M comsole=comX vga=mode-0x0311
>      loading /boot/xen.gz..........
>      Module:/boot/vmlinuz-2.6.xen root=LABEL=root-mhycetek ro Xencons=hvc
>      console=hvc0 console=tty0 quiet vga=785 splash
>      Loading /boot/vmlinuz-2.6.xen.........
>      Module:/boot/initrd-2.6-xen.img
>      Loading
>      
> /boot/initrd-2.6-xen.img...............................................................................................
>      Booting:MBI=0x00010120, entry=0x00100000
>      
> ***************************************************************************************/
> 
>      Versions used in Non-working case
> 
>      xen - 3.4.3/4.0.0
>      kernel - xen/next
>      initrd - default one which came with xcp0.1.1 download.(Ps note, in xcp
>      ddk cannot build initrd image)
> 
>      in Working case
> 
>      xen - 3.4.2
>      kernel - xcp 0.1.1
>      initrd - one that came with xcp 0.1.1
> 
>      Checked in my .config and changed CONFIG_PHYSICAL_START to 0x00100000
>      and CONFIG_PHYSICAL_ALIGN=0x100000, didn't help.
> 
>      Inputs appreciated.
> 
>      Thanks
> 
> References
> 
>    Visible links
>    1. http://ritu.kaur.us/
>    2. http://gmail.com/

> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel