[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: [Xen-devel] domU boot time Oops: 0000 [#1] SMP with backtrace


  • To: xen-devel@xxxxxxxxxxxxxxxxxxx
  • From: Bruce Edge <bruce.edge@xxxxxxxxx>
  • Date: Sun, 20 Jun 2010 09:11:15 -0700
  • Delivery-date: Sun, 20 Jun 2010 09:12:24 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=dW7AOMPVMUBtpj/28BuCy4C2NQlRPxtnTyaYdrR5RxEJEd9KO4KwVvzi3YuH8Z26Fu 0h3ZQA4bowZnuohNeLCmZzD+Ewcd59AzwAwWprzJFqsYyGWDLbgwXPw060PS6PeUFfJ2 1D84J8kdCKxTByNEVEWR/cFLU/eLvBa3tW4cU=
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>


On Sun, Jun 20, 2010 at 8:44 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Sun, Jun 20, 2010 at 07:21:01AM -0700, Bruce Edge wrote:
>    On Sun, Jun 20, 2010 at 1:53 AM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
>      On Sat, Jun 19, 2010 at 04:19:04PM -0700, Bruce Edge wrote:
>      >    Pasi, thanks for the updated configs.*
>      >    Running both dom0 and domU with this config applied to
>      the*2.6.32.15
>      >    pvops*tree and xen 4.0.1.rc3pre*still Oops's on hvm domU's.
>      >
>
>      In HVM guests you should really run whatever is the default kernel in
>      the distro you install there?
>      These kernel's are (mainly) meant for PV guests, aka dom0 and PV domU.
>
>    Isn't the idea behind the pvops kernel is that you don't need a different
>    kernel version for every application?
>    Or is the hvm guest the one exception to the run-anywhere applicability of
>    the pvops kernel?
>    This is for an ubuntu based embedded system so I'd like to be able to use
>    the same kernel for dom0 and domU.
>    We will eventually transition to a pv domU, but currently our pci drivers
>    don't work in a pv environment so right now I need an hvm domU.
>    Thanks for your help Pasi.
>

The whole point of HVM is that you don't need to have a special kernel there!
So you can use the whatever *default* kernel the distro has.

But in the interest of saving space, one can re-use the dom0 pvops kernel right?
 

If you want, you CAN use the pvops kernel there aswell.. latest versions
even have the pv-on-hvm drivers.


That's the point of the original post. The pvops 2.6.32.15 Oops's when run in hvm mode.
I've tried half a dozen different config's and the result is always the same.

It's always right after this in the boot sequence (not repasting, it's in full below):

> Setting APIC routing to physical flat
> BUG: unable to handle kernel NULL pointer dereference at (null)

Does the pvops kernel need different boot cmdline APIC settings in hvm mode?

If pvops should work in hvm mode, then this kernel should boot. No?

-Bruce
 
-- Pasi

>    -Bruce
>
>
>      >    It seems to be a problem with the domU because I can run 2.6.30
>      bare-metal
>      >    kernels OK.*
>      >    I've*seen other thread here that indicate there are problems with
>      >    2.6.32.15. Should I go back to 2.6.32.10?
>      >
>
>      latest 2.6.32.15 (as of yesterday) works for me.
>      >    Also, I see a lot of people are sticking with Xen 4.0.1.rc2, are
>      there
>      >    problems with rc3?
>      >
>
>      I used xen 4.0.1-rc3-pre as of yesterday.
>
>      -- Pasi
>      >    Are there any kernel boot params that I need to use when using a
>      pvops
>      >    kernel in hvm mode?
>      >    Here's the pv domU boot seqence:
>      >    Initializing cgroup subsys cpu * * * * * * * * * * * * * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    Linux version 2.6.32.15 (root@kaan) (gcc version 4.3.3 (Ubuntu
>      >    4.3.3-5ubuntu4) ) #1 SMP Sat Jun 19 09:15:07 PDT 2010 * * * * * * *
>      *
>      >    Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15 root=/dev/sda1 ro
>      >    bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0
>      >    console=ttyS0,115200n8 selinux=0 cgroup_disable=memory * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      *
>      >    KERNEL supported cpus:
>      >    **Intel GenuineIntel
>      >    **AMD AuthenticAMD
>      >    **Centaur CentaurHauls
>      >    BIOS-provided physical RAM map:
>      >    *BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>      >    *BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>      >    *BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>      >    *BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
>      >    *BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
>      >    DMI 2.4 present.
>      >    last_pfn = 0x80000 max_arch_pfn = 0x400000000
>      >    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>      >    init_memory_mapping: 0000000000000000-0000000080000000
>      >    RAMDISK: 3469b000 - 37fef393
>      >    ACPI: RSDP 00000000000ea020 00024 (v02 * *Xen)
>      >    ACPI: XSDT 00000000fc012cb0 00034 (v01 * *Xen * * *HVM 00000000
>      HVML
>      >    00000000)
>      >    ACPI: FACP 00000000fc012ad0 000F4 (v04 * *Xen * * *HVM 00000000
>      HVML
>      >    00000000)
>      >    ACPI: DSDT 00000000fc002c40 0FE0B (v02 * *Xen * * *HVM 00000000
>      INTL
>      >    20081204)
>      >    ACPI: FACS 00000000fc002c00 00040
>      >    ACPI: APIC 00000000fc012bd0 000D8 (v02 * *Xen * * *HVM 00000000
>      HVML
>      >    00000000)
>      >    No NUMA configuration found
>      >    Faking a node at 0000000000000000-0000000080000000
>      >    Bootmem setup node 0 0000000000000000-0000000080000000
>      >    **NODE_DATA [0000000000009000 - 0000000000020fff]
>      >    **bootmap [0000000000021000 - *0000000000030fff] pages 10
>      >    (7 early reservations) ==> bootmem [0000000000 - 0080000000]
>      >    **#0 [0000000000 - 0000001000] * BIOS data page ==> [0000000000 -
>      >    0000001000]
>      >    **#1 [0000006000 - 0000008000] * * * TRAMPOLINE ==> [0000006000 -
>      >    0000008000]
>      >    **#2 [0001000000 - 000271ce78] * *TEXT DATA BSS ==> [0001000000 -
>      >    000271ce78]
>      >    **#3 [003469b000 - 0037fef393] * * * * *RAMDISK ==> [003469b000 -
>      >    0037fef393]
>      >    **#4 [000009fc00 - 0000100000] * *BIOS reserved ==> [000009fc00 -
>      >    0000100000]
>      >    **#5 [000271d000 - 000271d0a1] * * * * * * *BRK ==> [000271d000 -
>      >    000271d0a1]
>      >    **#6 [0000008000 - 0000009000] * * * * *PGTABLE ==> [0000008000 -
>      >    0000009000]
>      >    found SMP MP-table at [ffff8800000fbc40] fbc40
>      >    Zone PFN ranges:
>      >    **DMA * * *0x00000000 -> 0x00001000
>      >    **DMA32 * *0x00001000 -> 0x00100000
>      >    **Normal * 0x00100000 -> 0x00100000
>      >    Movable zone start PFN for each node
>      >    early_node_map[2] active PFN ranges
>      >    ** *0: 0x00000100 -> 0x00080000 * * * * * * * * * * * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: PM-Timer IO Port: 0x1f48 * * * * * * * * * * * * * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) * * * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    Using ACPI (MADT) for SMP configuration information * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    SMP: Allowing 15 CPUs, 14 hotplug CPUs * * * * * * * * * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    Xen version 4.0. * * * * * * * * * * * * * * * * * * * * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    Allocating PCI resources starting at 80000000 (gap:
>      80000000:7c000000) * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    Booting paravirtualized kernel on Xen * * * * * * * * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1 * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    PERCPU: Embedded 478 pages/cpu @ffff880006000000 s1927128 r8192
>      d22568
>      >    u2097152 * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    pcpu-alloc: s1927128 r8192 d22568 u2097152 alloc=1*2097152 * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    Built 1 zonelists in Node order, mobility grouping on. *Total
>      pages:
>      >    510779 * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    Policy zone: DMA32 * * * * * * * * * * * * * * * * * * * * * * * *
>      * * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>      >    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15
>      root=/dev/sda1 ro
>      >    bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0 conso
>      >    le=ttyS0,115200n8 selinux=0 cgroup_disable=memory * * * * * * * * *
>      * * *
>      >    * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
>      >    init_cpus[0]=1
>      >    setting init process cpumask to 81757470
>      >    Disabling memory control group subsystem
>      >    PID hash table entries: 4096 (order: 3, 32768 bytes)
>      >    Initializing CPU#0
>      >    Checking aperture...
>      >    No AGP bridge found
>      >    Memory: 1932088k/2097152k available (4832k kernel code, 388k
>      absent,
>      >    164676k reserved, 3457k data, 3392k init)
>      >    SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=15,
>      Nodes=1
>      >    Hierarchical RCU implementation.
>      >    NR_IRQS:4352 nr_irqs:936
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    xen map irq failed -38
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>      >    ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>      >    Console: colour VGA+ 80x25
>      >    console [ttyS0] enabled
>      >    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo
>      Molnar
>      >    ... MAX_LOCKDEP_SUBCLASSES: *8
>      >    ... MAX_LOCK_DEPTH: * * * * *48
>      >    ... MAX_LOCKDEP_KEYS: * * * *8191
>      >    ... CLASSHASH_SIZE: * * * * *4096
>      >    ... MAX_LOCKDEP_ENTRIES: * * 16384
>      >    ... MAX_LOCKDEP_CHAINS: * * *32768
>      >    ... CHAINHASH_SIZE: * * * * *16384
>      >    *memory used by lock dependency info: 6367 kB
>      >    *per task-struct memory footprint: 2688 bytes
>      >    Fast TSC calibration using PIT
>      >    Detected 2533.869 MHz processor.
>      >    Calibrating delay loop (skipped), value calculated using timer
>      frequency..
>      >    5067.73 BogoMIPS (lpj=2533869)
>      >    kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All
>      Rights
>      >    Reserved
>      >    kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
>      >    kdb_cmd[8]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
>      >    kdb_cmd[15]: defcmd archkdbshort "" "archkdb with less detailed
>      backtrace"
>      >    Security Framework initialized
>      >    SELinux: *Disabled at boot.
>      >    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>      >    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>      >    Mount-cache hash table entries: 256
>      >    Initializing cgroup subsys ns
>      >    Initializing cgroup subsys cpuacct
>      >    Initializing cgroup subsys memory
>      >    Initializing cgroup subsys devices
>      >    Initializing cgroup subsys freezer
>      >    Initializing cgroup subsys net_cls
>      >    CPU: L1 I cache: 32K, L1 D cache: 32K
>      >    CPU: L2 cache: 256K
>      >    CPU: L3 cache: 8192K
>      >    CPU 0/0x0 -> Node 0
>      >    CPU: Unsupported number of siblings 32
>      >    mce: CPU supports 9 MCE banks
>      >    Performance Events: unsupported p6 CPU model 26 no PMU driver,
>      software
>      >    events only.
>      >    lockdep: fixing up alternatives.
>      >    SMP alternatives: switching to UP code
>      >    ACPI: Core revision 20090903
>      >    ftrace: converting mcount calls to 0f 1f 44 00 00
>      >    ftrace: allocating 24436 entries in 96 pages
>      >    Setting APIC routing to physical flat
>      >    BUG: unable to handle kernel NULL pointer dereference at (null)
>      >    IP: [<ffffffff8102ba2e>] add_pin_to_irq_node_nopanic+0x10/0x81
>      >    PGD 0*
>      >    Oops: 0000 [#1] SMP*
>      >    last sysfs file:*
>      >    Entering kdb (current=0xffff88007f4c0000, pid 1) on processor 0
>      Oops:
>      >    <NULL>
>      >    due to oops @ 0xffffffff8102ba2e
>      >    ** * r15 = 0x0000000000000000 * * *r14 = 0x0000000000000001*
>      >    ** * r13 = 0x0000000000000001 * * *r12 = 0xffffffff81735480*
>      >    ** * *bp = 0xffff88007f4bbe00 * * * bx = 0x0000000000000005*
>      >    ** * r11 = 0xffff88007f4bbe00 * * *r10 = 0xffff88007f4c0000*
>      >    ** * *r9 = 0x0000000000000046 * * * r8 = 0xffff88007f4bbe00*
>      >    ** * *ax = 0xffffffff81735480 * * * cx = 0x0000000000000001*
>      >    ** * *dx = 0x0000000000000000 * * * si = 0x0000000000000000*
>      >    ** * *di = 0x0000000000000000 *orig_ax = 0xffffffffffffffff*
>      >    ** * *ip = 0xffffffff8102ba2e * * * cs = 0x0000000000000010*
>      >    ** flags = 0x0000000000010282 * * * sp = 0xffff88007f4bbdd0*
>      >    ** * *ss = 0x0000000000000018 &regs = 0xffff88007f4bbd38
>      >    -Bruce
>      >
>      >    On Sat, Jun 19, 2010 at 8:37 AM, Pasi K*rkk*inen
>      <[1][2]pasik@xxxxxx> wrote:
>      >
>      >      On Sat, Jun 19, 2010 at 07:19:32AM -0700, Bruce Edge wrote:
>      >      > * *This is a 2.6.32x pv-ops with essentially pasi's config,
>      modified
>      >      enough
>      >      > * *to get past the
>      >      > *
>      >
>       *[1][2][3]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
>      >      > * *problem
>      >      >
>      >
>      >      The latest example .config should work without modifications:
>      >
>       [3][4]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64
>      >
>      >      -- Pasi
>      >      > * *Started domain dpm (id=15)
>      >      > * * * * * * * * * * * * * * *Initializing cgroup subsys cpuset
>      >      > * *Initializing cgroup subsys cpu
>      >      > * *Linux version 2.6.32.15 (root@kaan) (gcc version 4.3.3
>      (Ubuntu
>      >      > * *4.3.3-5ubuntu4) ) #1 SMP Fri Jun 18 17:01:34 PDT 2010
>      >      > * *Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15
>      >      > * *root=UUID=4d2c0dbc-296e-40be-bdbc-955437414fcb ro
>      >      bigphysarea=128000
>      >      > * *kdb=on nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8
>      selinux=0
>      >      > * *cgroup_disable=memory
>      >      > * *KERNEL supported cpus:
>      >      > * * *Intel GenuineIntel
>      >      > * * *AMD AuthenticAMD
>      >      > * * *Centaur CentaurHauls
>      >      > * *BIOS-provided physical RAM map:
>      >      > * * BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>      >      > * * BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>      >      > * * BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>      >      > * * BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
>      >      > * * BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
>      >      > * *DMI 2.4 present.
>      >      > * *last_pfn = 0x80000 max_arch_pfn = 0x400000000
>      >      > * *x86 PAT enabled: cpu 0, old 0x7040600070406, new
>      0x7010600070106
>      >      > * *init_memory_mapping: 0000000000000000-0000000080000000
>      >      > * *RAMDISK: 3469c000 - 37fef46b
>      >      > * *ACPI: RSDP 00000000000ea020 00024 (v02 * *Xen)
>      >      > * *ACPI: XSDT 00000000fc012cb0 00034 (v01 * *Xen * * *HVM
>      00000000
>      >      HVML
>      >      > * *00000000)
>      >      > * *ACPI: FACP 00000000fc012ad0 000F4 (v04 * *Xen * * *HVM
>      00000000
>      >      HVML
>      >      > * *00000000)
>      >      > * *ACPI: DSDT 00000000fc002c40 0FE0B (v02 * *Xen * * *HVM
>      00000000
>      >      INTL
>      >      > * *20081204)
>      >      > * *ACPI: FACS 00000000fc002c00 00040
>      >      > * *ACPI: APIC 00000000fc012bd0 000D8 (v02 * *Xen * * *HVM
>      00000000
>      >      HVML
>      >      > * *00000000)
>      >      > * *No NUMA configuration found
>      >      > * *Faking a node at 0000000000000000-0000000080000000
>      >      > * *Bootmem setup node 0 0000000000000000-0000000080000000
>      >      > * * *NODE_DATA [0000000000009000 - 0000000000020fff]
>      >      > * * *bootmap [0000000000021000 - *0000000000030fff] pages 10
>      >      > * *(7 early reservations) ==> bootmem [0000000000 - 0080000000]
>      >      > * * *#0 [0000000000 - 0000001000] * BIOS data page ==>
>      [0000000000 -
>      >      > * *0000001000]
>      >      > * * *#1 [0000006000 - 0000008000] * * * TRAMPOLINE ==>
>      [0000006000 -
>      >      > * *0000008000]
>      >      > * * *#2 [0001000000 - 00027308b8] * *TEXT DATA BSS ==>
>      [0001000000 -
>      >      > * *00027308b8]
>      >      > * * *#3 [003469c000 - 0037fef46b] * * * * *RAMDISK ==>
>      [003469c000 -
>      >      > * *0037fef46b]
>      >      > * * *#4 [000009fc00 - 0000100000] * *BIOS reserved ==>
>      [000009fc00 -
>      >      > * *0000100000]
>      >      > * * *#5 [0002731000 - 00027310a1] * * * * * * *BRK ==>
>      [0002731000 -
>      >      > * *00027310a1]
>      >      > * * *#6 [0000008000 - 0000009000] * * * * *PGTABLE ==>
>      [0000008000 -
>      >      > * *0000009000]
>      >      > * *found SMP MP-table at [ffff8800000fbc40] fbc40
>      >      > * *Zone PFN ranges:
>      >      > * * *DMA * * *0x00000000 -> 0x00001000
>      >      > * * *DMA32 * *0x00001000 -> 0x00100000
>      >      > * * *Normal * 0x00100000 -> 0x00100000
>      >      > * *Movable zone start PFN for each node
>      >      > * *early_node_map[2] active PFN ranges
>      >      > * * * *0: 0x00000000 -> 0x0000009f
>      >      > * * * *0: 0x00000100 -> 0x00080000
>      >      > * *ACPI: PM-Timer IO Port: 0x1f48
>      >      > * *ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
>      >      > * *ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
>      >      > * *ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>      >      > * *IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI
>      0-47
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>      >      > * *Using ACPI (MADT) for SMP configuration information
>      >      > * *SMP: Allowing 15 CPUs, 14 hotplug CPUs
>      >      > * *Xen version 4.0.
>      >      > * *PM: Registered nosave memory: 000000000009f000 -
>      00000000000a0000
>      >      > * *PM: Registered nosave memory: 00000000000a0000 -
>      00000000000e0000
>      >      > * *PM: Registered nosave memory: 00000000000e0000 -
>      0000000000100000
>      >      > * *Allocating PCI resources starting at 80000000 (gap:
>      >      80000000:7c000000)
>      >      > * *Booting paravirtualized kernel on Xen
>      >      > * *NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1
>      >      > * *PERCPU: Embedded 478 pages/cpu @ffff880006000000 s1927128
>      r8192
>      >      d22568
>      >      > * *u2097152
>      >      > * *pcpu-alloc: s1927128 r8192 d22568 u2097152 alloc=1*2097152
>      >      > * *pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06
>      [0] 07
>      >      > * *pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14
>      >      > * *Built 1 zonelists in Node order, mobility grouping on.
>      *Total
>      >      pages:
>      >      > * *510779
>      >      > * *Policy zone: DMA32
>      >      > * *Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15
>      >      > * *root=UUID=4d2c0dbc-296e-40be-bdbc-955437414fcb ro
>      >      bigphysarea=128000
>      >      > * *kdb=on nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8
>      selinux=0
>      >      > * *cgroup_disable=memory
>      >      > * *init_cpus[0]=1
>      >      > * *setting init process cpumask to 81769470
>      >      > * *Disabling memory control group subsystem
>      >      > * *PID hash table entries: 4096 (order: 3, 32768 bytes)
>      >      > * *Initializing CPU#0
>      >      > * *Checking aperture...
>      >      > * *No AGP bridge found
>      >      > * *Memory: 1932012k/2097152k available (4878k kernel code, 388k
>      >      absent,
>      >      > * *164752k reserved, 3489k data, 3392k init)
>      >      > * *SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
>      CPUs=15,
>      >      Nodes=1
>      >      > * *Hierarchical RCU implementation.
>      >      > * *NR_IRQS:4352 nr_irqs:936
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *xen map irq failed -38
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>      >      > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>      >      > * *Console: colour VGA+ 80x25
>      >      > * *console [ttyS0] enabled
>      >      > * *Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
>      Ingo
>      >      Molnar
>      >      > * *... MAX_LOCKDEP_SUBCLASSES: *8
>      >      > * *... MAX_LOCK_DEPTH: * * * * *48
>      >      > * *... MAX_LOCKDEP_KEYS: * * * *8191
>      >      > * *... CLASSHASH_SIZE: * * * * *4096
>      >      > * *... MAX_LOCKDEP_ENTRIES: * * 16384
>      >      > * *... MAX_LOCKDEP_CHAINS: * * *32768
>      >      > * *... CHAINHASH_SIZE: * * * * *16384
>      >      > * * memory used by lock dependency info: 6367 kB
>      >      > * * per task-struct memory footprint: 2688 bytes
>      >      > * *Fast TSC calibration using PIT
>      >      > * *Detected 2533.594 MHz processor.
>      >      > * *Calibrating delay loop (skipped), value calculated using
>      timer
>      >      frequency..
>      >      > * *5067.18 BogoMIPS (lpj=2533594)
>      >      > * *kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright
>      SGI, All
>      >      Rights
>      >      > * *Reserved
>      >      > * *kdb_cmd[0]: defcmd archkdb *First line arch debugging
>      >      > * *kdb_cmd[8]: defcmd archkdbcpu *archkdb with only tasks on
>      cpus
>      >      > * *kdb_cmd[15]: defcmd archkdbshort *archkdb with less detailed
>      >      backtrace
>      >      > * *Security Framework initialized
>      >      > * *SELinux: *Disabled at boot.
>      >      > * *Dentry cache hash table entries: 262144 (order: 9, 2097152
>      bytes)
>      >      > * *Inode-cache hash table entries: 131072 (order: 8, 1048576
>      bytes)
>      >      > * *Mount-cache hash table entries: 256
>      >      > * *Initializing cgroup subsys ns
>      >      > * *Initializing cgroup subsys cpuacct
>      >      > * *Initializing cgroup subsys memory
>      >      > * *Initializing cgroup subsys devices
>      >      > * *Initializing cgroup subsys freezer
>      >      > * *Initializing cgroup subsys net_cls
>      >      > * *CPU: L1 I cache: 32K, L1 D cache: 32K
>      >      > * *CPU: L2 cache: 256K
>      >      > * *CPU: L3 cache: 8192K
>      >      > * *CPU 0/0x0 -> Node 0
>      >      > * *CPU: Unsupported number of siblings 32
>      >      > * *mce: CPU supports 9 MCE banks
>      >      > * *Performance Events: unsupported p6 CPU model 26 no PMU
>      driver,
>      >      software
>      >      > * *events only.
>      >      > * *lockdep: fixing up alternatives.
>      >      > * *SMP alternatives: switching to UP code
>      >      > * *ACPI: Core revision 20090903
>      >      > * *ftrace: converting mcount calls to 0f 1f 44 00 00
>      >      > * *ftrace: allocating 24649 entries in 97 pages
>      >      > * *Setting APIC routing to physical flat
>      >      > * *BUG: unable to handle kernel NULL pointer dereference at
>      (null)
>      >      > * *IP: [<ffffffff8102ba2e>]
>      add_pin_to_irq_node_nopanic+0x10/0x81
>      >      > * *PGD 0
>      >      > * *Oops: 0000 [#1] SMP
>      >      > * *last sysfs file:
>      >      > * *Entering kdb (current=0xffff88007f4c0000, pid 1) on
>      processor 0
>      >      Oops:
>      >      > * *<NULL>
>      >      > * *due to oops @ 0xffffffff8102ba2e
>      >      > * * * * r15 = 0x0000000000000000 * * *r14 = 0x0000000000000001
>      >      > * * * * r13 = 0x0000000000000001 * * *r12 = 0xffffffff81747480
>      >      > * * * * *bp = 0xffff88007f4bbe00 * * * bx = 0x0000000000000005
>      >      > * * * * r11 = 0xffff88007f4bbe00 * * *r10 = 0xffff88007f4c0000
>      >      > * * * * *r9 = 0x0000000000000046 * * * r8 = 0xffff88007f4bbe00
>      >      > * * * * *ax = 0xffffffff81747480 * * * cx = 0x0000000000000001
>      >      > * * * * *dx = 0x0000000000000000 * * * si = 0x0000000000000000
>      >      > * * * * *di = 0x0000000000000000 *orig_ax = 0xffffffffffffffff
>      >      > * * * * *ip = 0xffffffff8102ba2e * * * cs = 0x0000000000000010
>      >      > * * * flags = 0x0000000000010282 * * * sp = 0xffff88007f4bbdd0
>      >      > * * * * *ss = 0x0000000000000018 &regs = 0xffff88007f4bbd38
>      >      > * *[0]kdb>
>      >      > * *[0]kdb>
>      >      > * *[0]kdb>
>      >      > * *[0]kdb> bt
>      >      > * *Stack traceback for pid 1
>      >      > * *0xffff88007f4c0000 * * * *1 * * * *0 *1 * *0 * R
>      >      *0xffff88007f4c0560
>      >      > * **swapper
>      >      > * *sp * * * * * * * *ip * * * * * * * *Function (args)
>      >      > * *bb_parse_opcode: no match at [kernel]kdb_save_running
>      >      0xffffffff8124668f -
>      >      > * *'push'
>      >      > * *bb_parse_opcode: no match at [kernel]kdb_save_running
>      >      0xffffffff81246690 -
>      >      > * *'mov'
>      >      > * *bb_parse_opcode: no match at [kernel]kdb_save_running
>      >      0xffffffff81246693 -
>      >      > * *'nop'
>      >      > * *bb_parse_opcode: no match at [kernel]kdb_save_running
>      >      0xffffffff81246695 -
>      >      > * *'add'
>      >      > * *bb_parse_opcode: no match at [kernel]kdb_save_running
>      >      0xffffffff81246698 -
>      >      > * *'mov'
>      >      > * *kdb_bb: address 0xffff88007f4bba48 not recognised
>      >      > * *Using old style backtrace, unreliable with no arguments
>      >      > * *sp * * * * * * * *ip * * * * * * * *Function (args)
>      >      > * *0xffff88007f4bbdb8 0xffffffff8102ba2e
>      >      add_pin_to_irq_node_nopanic+0x10
>      >      > * *0xffff88007f4bbe08 0xffffffff8102c9a1
>      add_pin_to_irq_node+0xe
>      >      > * *0xffff88007f4bbe18 0xffffffff81a162fb
>      setup_IO_APIC_irqs+0x1a4
>      >      > * *0xffff88007f4bbe68 0xffffffff81a163c7 setup_IO_APIC+0x43
>      >      > * *0xffff88007f4bbe88 0xffffffff81a11a74
>      native_smp_prepare_cpus+0x1d7
>      >      > * *0xffff88007f4bbed8 0xffffffff81a048a6 kernel_init+0x75
>      >      > * *0xffff88007f4bbf48 0xffffffff81013faa child_rip+0xa
>      >      > * *[0]kdb>
>      >      > * *[0]kdb>
>      >      > * *[0]kdb>
>      >      > * *[0]kdb>
>      >      > * *This domU works with bare-metal kernels, this is the first
>      time
>      >      I've
>      >      > * *attempted to use pv-ops kernel for this domU.
>      >      > * *-Bruce
>      >      >
>      >      > References
>      >      >
>      >      > * *Visible links
>      >      > * *1.
>      >
>       [4][5]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
>      >      > _______________________________________________
>      >      > Xen-devel mailing list
>      >      > [5][6]Xen-devel@xxxxxxxxxxxxxxxxxxx
>      >      > [6][7]http://lists.xensource.com/xen-devel
>      >
>      > References
>      >
>      >    Visible links
>      >    1. mailto:[8]pasik@xxxxxx
>      >    2.
>      [9]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
>      >    3.
>      [10]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64
>      >    4.
>      [11]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
>      >    5. mailto:[12]Xen-devel@xxxxxxxxxxxxxxxxxxx
>      >    6. [13]http://lists.xensource.com/xen-devel
>      > _______________________________________________
>      > Xen-devel mailing list
>      > [14]Xen-devel@xxxxxxxxxxxxxxxxxxx
>      > [15]http://lists.xensource.com/xen-devel
>    7. http://lists.xensource.com/xen-devel
>    8. mailto:pasik@xxxxxx
>    9. http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
>   10. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64
>   11. http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html
>   12. mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx
>   13. http://lists.xensource.com/xen-devel
>   14. mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx
>   15. http://lists.xensource.com/xen-devel

> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.