|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] aic79xx failures with pvops dom0 2.6.32.25
I'm having difficulty booting Xen on a particular machine that has an
aic79xx controller, it works elsewhere fine. The boot gets into a weird
loop where the aic79xxx ATA devices kept not coming up. It appeared to
be IRQ related as it looks like the aic79xxx card was sharing an IRQ
with the e1000. The first error seems to be:
[ 1.359019] uhci_hcd 0000:00:1d.0: request interrupt 11 failed
and then a lot of irq related stuff fails after that.
I was first working with the Debian linux-image-2.6.32-5-xen-686 kernel,
along with Xen 4.0.1, booting with various kernel parameters: noapic,
noacpi, apic=off, but none seemed to improve the situation[0]. If you
are interested in seeing that bootlog, you can view it here:
http://micah.riseup.net/pastes/2010-11-19T182929.XDFfvhPZhJ
My next step was to replace the hypervisor with upstream (xen.org)
xen-4.0-testing.hg (ie. xen-4.0.2-rc), as I understand that there have
been some IRQ-related bug fixes there. I wanted to see if the problem
was the Xen hypervisor. But same problem, this time with more ASCII art
(I added some more debugging kernel parameters this time):
http://micah.riseup.net/pastes/2010-11-19T192911.ckgFXgpv4Y
I also tried with acpi=off, but again no changes.
So the next step was to try the upstream dom0 kernel to see if that
helps. I used: "git checkout -b xen/stable-2.6.32.x
origin/xen/stable-2.6.32.x" and did a "make oldconfig" basing the kernel
config file from the debian /boot/config-2.6.32-5-xen-686.
I let it boot until it dropped to the initramfs shell, the log follows,
same issue. At this point I'm not sure what the next step is, I'm happy
to do any more debugging if anyone has any suggestions for what I should
do.
Thanks!
micah
__ __ _ _ ___ ____ _
\ \/ /___ _ __ | || | / _ \ |___ \ _ __ ___/ | _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | __) |__| '__/ __| |__| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | / __/|__| | | (__| |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)_____| |_| \___|_| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.2-rc1-pre (root@xxxxxxxxxx) (gcc version 4.4.5 (Debian
4.4.5-6) ) Fri Nov 19 15:25:02 PST 2010
(XEN) Latest ChangeSet: Tue Nov 16 11:54:48 2010 +0000 21386:e9156d9d996b
(XEN) Bootloader: GRUB 1.98+20100804-7
(XEN) Command line: placeholder dom0_mem=512M dom0_max_vcpus=1 loglvl=all
guest_loglvl=all lapic=debug apic_verbosity=debug apic=debug console=com1
com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f7ef9000 (usable)
(XEN) 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
(XEN) 00000000f7f00000 - 00000000f7f80000 (usable)
(XEN) 00000000f7f80000 - 00000000f8000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff800000 - 00000000ffc00000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000208000000 (usable)
(XEN) System RAM: 8191MB (8387680kB)
(XEN) ACPI Error (tbxfroot-0220): A valid RSDP was not found [20070126]
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000208000000
(XEN) Xen heap: 8MB (8856kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6ca0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000
(XEN) Processor #0 15:2 APIC version 20
(XEN) Processor #6 15:2 APIC version 20
(XEN) Processor #1 15:2 APIC version 20
(XEN) Processor #7 15:2 APIC version 20
(XEN) I/O APIC #2 Version 32 at 0xFEC00000.
(XEN) I/O APIC #3 Version 32 at 0xFEC80000.
(XEN) I/O APIC #4 Version 32 at 0xFEC80400.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Processors: 4
(XEN) mapped APIC to fff7e000 (fee00000)
(XEN) mapped IOAPIC to fff7d000 (fec00000)
(XEN) mapped IOAPIC to fff7c000 (fec80000)
(XEN) mapped IOAPIC to fff7b000 (fec80400)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3199.214 MHz processor.
(XEN) CPU0: Intel Extended MCE MSRs (12) available
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) masked ExtINT on CPU#1
(XEN) CPU1: Intel Extended MCE MSRs (12) available
(XEN) masked ExtINT on CPU#2
(XEN) CPU2: Intel Extended MCE MSRs (12) available
(XEN) masked ExtINT on CPU#3
(XEN) CPU3: Intel Extended MCE MSRs (12) available
(XEN) Total of 4 processors activated.
(XEN) ExtINT not setup in hardware but reported by MP table
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23, 3-0,
3-1, 3-2, 3-3, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16,
3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-8, 4-9,
4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22,
4-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) number of MP IRQ sources: 23.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) number of IO-APIC #4 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #2......
(XEN) .... register #00: 02008000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 1
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 0 0 0 0 0 1 1 58
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 001 01 0 0 0 0 0 1 1 60
(XEN) 0d 001 01 0 0 0 0 0 1 1 68
(XEN) 0e 001 01 0 0 0 0 0 1 1 70
(XEN) 0f 001 01 0 0 0 0 0 1 1 78
(XEN) 10 001 01 1 1 0 1 0 1 1 88
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 001 01 1 1 0 1 0 1 1 90
(XEN) 13 001 01 1 1 0 1 0 1 1 98
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 001 01 1 1 0 1 0 1 1 A0
(XEN) 05 001 01 1 1 0 1 0 1 1 A8
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #4......
(XEN) .... register #00: 04000000
(XEN) ....... : physical APIC id: 04
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 04000000
(XEN) ....... : arbitration: 04
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 001 01 1 1 0 1 0 1 1 B0
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 001 01 1 1 0 1 0 1 1 B8
(XEN) 07 001 01 1 1 0 1 0 1 1 C0
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:12
(XEN) IRQ104 -> 0:13
(XEN) IRQ112 -> 0:14
(XEN) IRQ120 -> 0:15
(XEN) IRQ136 -> 0:16
(XEN) IRQ144 -> 0:18
(XEN) IRQ152 -> 0:19
(XEN) IRQ160 -> 1:4
(XEN) IRQ168 -> 1:5
(XEN) IRQ176 -> 2:0
(XEN) IRQ184 -> 2:6
(XEN) IRQ192 -> 2:7
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3199.1498 MHz.
(XEN) ..... host bus clock speed is 133.2977 MHz.
(XEN) ..... bus_scale = 0x0000887F
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
Ã(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x166c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000030000000->0000000038000000 (98304 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c166c000
(XEN) Init. ramdisk: c166c000->c77f0259
(XEN) Phys-Mach map: c77f1000->c7871000
(XEN) Start info: c7871000->c787147c
(XEN) Page tables: c7872000->c78b5000
(XEN) Boot stack: c78b5000->c78b6000
(XEN) TOTAL: c0000000->c7c00000
(XEN) ENTRY ADDRESS: c13e0000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM:
............................................................................done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes
258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 152kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.25 (root@quelea) (gcc version 4.4.5 (Debian
4.4.5-6) ) #6 SMP Sat Nov 20 09:14:48 PST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
[ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000208000000 - 00000002dfef9000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 083ff000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[ 0.000000] 0000000000 - 002cffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
[ 0.000000] RAMDISK: 0166c000 - 077f0259
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 11054MB HIGHMEM available.
[ 0.000000] 719MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2cffe000
[ 0.000000] low ram: 0 - 2cffe000
[ 0.000000] node 0 low ram: 00000000 - 2cffe000
[ 0.000000] node 0 bootmap 00010000 - 00015a00
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 002cffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0007872000 - 00078b5000] XEN PAGETABLES ==> [0007872000
- 00078b5000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #4 [0001000000 - 00014fb8b4] TEXT DATA BSS ==> [0001000000
- 00014fb8b4]
[ 0.000000] #5 [000166c000 - 00077f0259] RAMDISK ==> [000166c000
- 00077f0259]
[ 0.000000] #6 [00077f1000 - 0007872000] XEN START INFO ==> [00077f1000
- 0007872000]
[ 0.000000] #7 [0208000000 - 02dfef9000] XEN EXTRA
[ 0.000000] #8 [00014fc000 - 0001509114] BRK ==> [00014fc000
- 0001509114]
[ 0.000000] #9 [0000100000 - 0000229000] PGTABLE ==> [0000100000
- 0000229000]
[ 0.000000] #10 [0000010000 - 0000016000] BOOTMAP ==> [0000010000
- 0000016000]
[ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002cffe
[ 0.000000] HighMem 0x0002cffe -> 0x002dfef9
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00208000 -> 0x002dfef9
[ 0.000000] On node 0 totalpages: 1015432
[ 0.000000] free_area_init_node: node 0, pgdat c13d5b00, node_mem_map
c78b5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1408 pages used for memmap
[ 0.000000] Normal zone: 125568 pages, LIFO batch:31
[ 0.000000] HighMem zone: 22110 pages used for memmap
[ 0.000000] HighMem zone: 862363 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID:
[ 0.000000] MPTABLE: Product ID: Kings Canyon
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
[ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
[ 0.000000] Processors: 1
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 00000000f7ef9000
[ 0.000000] PM: Registered nosave memory: 00000000f7ef9000 - 00000000f7f00000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:d7ef9000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @cd4c7000 s37656 r0 d23784 u65536
[ 0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 991882
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/quelea0-root
ro console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between cd537000 - d1537000
[ 0.000000] DMA: software IO TLB at phys 0xd537000 - 0x11537000
[ 0.000000] xen_swiotlb_fixup: buf=cd537000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=d1597000 size=32768
[ 0.000000] Initializing HighMem for node 0 (0002cffe:002dfef9)
[ 0.000000] Memory: 256008k/12057572k available (2588k kernel code, 267692k
reserved, 1377k data, 396k init, 3537892k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
[ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.000000] vmalloc : 0xed7fe000 - 0xf4ffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xecffe000 ( 719 MB)
[ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB)
[ 0.000000] .data : 0xc12870a5 - 0xc13df898 (1377 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12870a5 (2588 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 3199.092 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6398.18 BogoMIPS (lpj=12796368)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: L3 cache: 1024K
[ 0.004000] CPU: Unsupported number of siblings 2
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] Performance Events: no PMU driver, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.004323] Freeing SMP alternatives: 13k freed
[ 0.004461] calling migration_init+0x0/0x43 @ 1
[ 0.004542] initcall migration_init+0x0/0x43 returned 0 after 0 usecs
[ 0.004554] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.004601] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 0 usecs
[ 0.004615] calling init_call_single_data+0x0/0x62 @ 1
[ 0.004626] initcall init_call_single_data+0x0/0x62 returned 0 after 0 usecs
[ 0.004638] calling spawn_softlockup_task+0x0/0x5b @ 1
[ 0.004691] initcall spawn_softlockup_task+0x0/0x5b returned 0 after 0 usecs
[ 0.004704] calling relay_init+0x0/0xd @ 1
[ 0.004713] initcall relay_init+0x0/0xd returned 0 after 0 usecs
[ 0.004723] calling tracer_alloc_buffers+0x0/0x12b @ 1
[ 0.004879] initcall tracer_alloc_buffers+0x0/0x12b returned 0 after 0 usecs
[ 0.004891] calling init_trace_printk+0x0/0xa @ 1
[ 0.004900] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs
[ 0.004910] Brought up 1 CPUs
[ 0.004926] CPU0 attaching NULL sched-domain.
[ 0.005155] devtmpfs: initialized
[ 0.005604] calling init_mmap_min_addr+0x0/0xd @ 1
[ 0.005615] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs
[ 0.005627] calling init_cpufreq_transition_notifier_list+0x0/0x14 @ 1
[ 0.005639] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned
0 after 0 usecs
[ 0.005652] calling net_ns_init+0x0/0xc9 @ 1
[ 0.005723] initcall net_ns_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.005737] calling e820_mark_nvs_memory+0x0/0x2d @ 1
[ 0.005751] initcall e820_mark_nvs_memory+0x0/0x2d returned 0 after 0 usecs
[ 0.005761] calling cpufreq_tsc+0x0/0x21 @ 1
[ 0.005771] initcall cpufreq_tsc+0x0/0x21 returned 0 after 0 usecs
[ 0.005782] calling pci_reboot_init+0x0/0xd @ 1
[ 0.005794] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs
[ 0.005803] calling reboot_init+0x0/0xd @ 1
[ 0.005820] initcall reboot_init+0x0/0xd returned 0 after 0 usecs
[ 0.005830] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.005855] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.005870] calling alloc_frozen_cpus+0x0/0x3 @ 1
[ 0.005880] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
[ 0.005890] calling sysctl_init+0x0/0x25 @ 1
[ 0.006094] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs
[ 0.006105] calling ksysfs_init+0x0/0x92 @ 1
[ 0.006125] initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs
[ 0.006136] calling async_init+0x0/0x4a @ 1
[ 0.006188] initcall async_init+0x0/0x4a returned 0 after 0 usecs
[ 0.006199] calling init_jiffies_clocksource+0x0/0xa @ 1
[ 0.006211] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0
usecs
[ 0.006222] calling pm_init+0x0/0x4b @ 1
[ 0.006279] initcall pm_init+0x0/0x4b returned 0 after 0 usecs
[ 0.006291] calling pm_disk_init+0x0/0xf @ 1
[ 0.006304] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs
[ 0.006316] calling swsusp_header_init+0x0/0x22 @ 1
[ 0.006327] initcall swsusp_header_init+0x0/0x22 returned 0 after 0 usecs
[ 0.006338] calling init_zero_pfn+0x0/0x10 @ 1
[ 0.006347] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs
[ 0.006357] calling filelock_init+0x0/0x25 @ 1
[ 0.006367] initcall filelock_init+0x0/0x25 returned 0 after 0 usecs
[ 0.006377] calling init_script_binfmt+0x0/0xc @ 1
[ 0.006386] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs
[ 0.006396] calling init_elf_binfmt+0x0/0xc @ 1
[ 0.006405] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs
[ 0.006414] calling debugfs_init+0x0/0x46 @ 1
[ 0.006429] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs
[ 0.006439] calling securityfs_init+0x0/0x3d @ 1
[ 0.006453] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs
[ 0.006464] calling random32_init+0x0/0xa4 @ 1
[ 0.006474] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.006487] calling virtio_init+0x0/0x1b @ 1
[ 0.006513] initcall virtio_init+0x0/0x1b returned 0 after 0 usecs
[ 0.006527] calling __gnttab_init+0x0/0x1b @ 1
[ 0.006615] Grant table initialized
[ 0.006625] initcall __gnttab_init+0x0/0x1b returned 0 after 0 usecs
[ 0.006636] calling regulator_init+0x0/0x20 @ 1
[ 0.006645] regulator: core version 0.5
[ 0.006661] initcall regulator_init+0x0/0x20 returned 0 after 0 usecs
[ 0.006672] calling cpufreq_core_init+0x0/0x75 @ 1
[ 0.006686] initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 usecs
[ 0.006696] calling cpuidle_init+0x0/0x2e @ 1
[ 0.006710] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs
[ 0.006720] calling sock_init+0x0/0x4f @ 1
[ 0.006807] initcall sock_init+0x0/0x4f returned 0 after 0 usecs
[ 0.006818] calling net_inuse_init+0x0/0x1b @ 1
[ 0.006829] initcall net_inuse_init+0x0/0x1b returned 0 after 0 usecs
[ 0.006840] calling netpoll_init+0x0/0x2b @ 1
[ 0.006849] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs
[ 0.006859] calling netlink_proto_init+0x0/0xf8 @ 1
[ 0.006887] NET: Registered protocol family 16
[ 0.006912] initcall netlink_proto_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.006923] calling bdi_class_init+0x0/0x31 @ 1
[ 0.006961] initcall bdi_class_init+0x0/0x31 returned 0 after 0 usecs
[ 0.006973] calling kobject_uevent_init+0x0/0x49 @ 1
[ 0.006989] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs
[ 0.007000] calling pcibus_class_init+0x0/0xf @ 1
[ 0.007024] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs
[ 0.007035] calling pci_driver_init+0x0/0xa @ 1
[ 0.007067] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs
[ 0.007078] calling backlight_class_init+0x0/0x48 @ 1
[ 0.007101] initcall backlight_class_init+0x0/0x48 returned 0 after 0 usecs
[ 0.007113] calling xenbus_init+0x0/0x260 @ 1
[ 0.007247] initcall xenbus_init+0x0/0x260 returned 0 after 0 usecs
[ 0.007258] calling tty_class_init+0x0/0x2b @ 1
[ 0.007280] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
[ 0.007292] calling vtconsole_class_init+0x0/0x9b @ 1
[ 0.007345] initcall vtconsole_class_init+0x0/0x9b returned 0 after 0 usecs
[ 0.007356] calling spi_init+0x0/0x8c @ 1
[ 0.007396] initcall spi_init+0x0/0x8c returned 0 after 0 usecs
[ 0.007408] calling lguest_devices_init+0x0/0x160 @ 1
[ 0.007418] initcall lguest_devices_init+0x0/0x160 returned 0 after 0 usecs
[ 0.007428] calling amd_postcore_init+0x0/0x62 @ 1
[ 0.007437] initcall amd_postcore_init+0x0/0x62 returned 0 after 0 usecs
[ 0.007448] calling arch_kdebugfs_init+0x0/0x1a @ 1
[ 0.007463] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs
[ 0.007474] calling init_pit_clocksource+0x0/0xa3 @ 1
[ 0.007486] initcall init_pit_clocksource+0x0/0xa3 returned 0 after 0 usecs
[ 0.007496] calling mtrr_if_init+0x0/0x40 @ 1
[ 0.007509] initcall mtrr_if_init+0x0/0x40 returned 0 after 0 usecs
[ 0.007519] calling ffh_cstate_init+0x0/0x23 @ 1
[ 0.007530] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
[ 0.007540] calling acpi_pci_init+0x0/0x4d @ 1
[ 0.007549] initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs
[ 0.007560] calling xen_pcpu_init+0x0/0x8e @ 1
[ 0.007605] sync cpu 0 get result 1 max_id 3
[ 0.007630] sync cpu 1 get result 1 max_id 3
[ 0.007655] sync cpu 2 get result 1 max_id 3
[ 0.007680] sync cpu 3 get result 1 max_id 3
[ 0.007708] initcall xen_pcpu_init+0x0/0x8e returned 1529 after 0 usecs
[ 0.007719] initcall xen_pcpu_init+0x0/0x8e returned with error code 1529
[ 0.007729] calling register_xen_pci_notifier+0x0/0x1b @ 1
[ 0.007739] initcall register_xen_pci_notifier+0x0/0x1b returned 0 after 0
usecs
[ 0.007750] calling setup_vcpu_hotplug_event+0x0/0x1b @ 1
[ 0.007759] initcall setup_vcpu_hotplug_event+0x0/0x1b returned 0 after 0
usecs
[ 0.007770] calling dmi_id_init+0x0/0x288 @ 1
[ 0.007846] initcall dmi_id_init+0x0/0x288 returned 0 after 0 usecs
[ 0.007857] calling dma_bus_init+0x0/0x2d @ 1
[ 0.007879] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs
[ 0.007891] calling dma_channel_table_init+0x0/0xc9 @ 1
[ 0.007908] initcall dma_channel_table_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.007919] calling pci_arch_init+0x0/0x56 @ 1
[ 0.009645] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
[ 0.009654] PCI: Using configuration type 1 for base access
[ 0.009676] initcall pci_arch_init+0x0/0x56 returned 0 after 3906 usecs
[ 0.009687] calling topology_init+0x0/0x32 @ 1
[ 0.009711] initcall topology_init+0x0/0x32 returned 0 after 0 usecs
[ 0.009722] calling mtrr_init_finialize+0x0/0x31 @ 1
[ 0.009733] initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs
[ 0.009743] calling param_sysfs_init+0x0/0x1ea @ 1
[ 0.010473] initcall param_sysfs_init+0x0/0x1ea returned 0 after 0 usecs
[ 0.010486] calling pm_sysrq_init+0x0/0x12 @ 1
[ 0.010496] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs
[ 0.010506] calling audit_watch_init+0x0/0x23 @ 1
[ 0.010516] initcall audit_watch_init+0x0/0x23 returned 0 after 0 usecs
[ 0.010527] calling init_slow_work+0x0/0x2b @ 1
[ 0.010536] initcall init_slow_work+0x0/0x2b returned 0 after 0 usecs
[ 0.010546] calling default_bdi_init+0x0/0x92 @ 1
[ 0.010695] initcall default_bdi_init+0x0/0x92 returned 0 after 0 usecs
[ 0.010707] calling init_bio+0x0/0xa7 @ 1
[ 0.010783] bio: create slab <bio-0> at 0
[ 0.010806] initcall init_bio+0x0/0xa7 returned 0 after 0 usecs
[ 0.010817] calling fsnotify_init+0x0/0xa @ 1
[ 0.010828] initcall fsnotify_init+0x0/0xa returned 0 after 0 usecs
[ 0.010838] calling fsnotify_notification_init+0x0/0xdc @ 1
[ 0.010851] initcall fsnotify_notification_init+0x0/0xdc returned 0 after 0
usecs
[ 0.010861] calling cryptomgr_init+0x0/0xa @ 1
[ 0.010871] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs
[ 0.010905] calling blk_settings_init+0x0/0x19 @ 1
[ 0.010915] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs
[ 0.010925] calling blk_ioc_init+0x0/0x22 @ 1
[ 0.010935] initcall blk_ioc_init+0x0/0x22 returned 0 after 0 usecs
[ 0.010945] calling blk_softirq_init+0x0/0x50 @ 1
[ 0.010955] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs
[ 0.010965] calling blk_iopoll_setup+0x0/0x50 @ 1
[ 0.010974] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs
[ 0.010983] calling genhd_device_init+0x0/0x5d @ 1
[ 0.011061] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs
[ 0.011072] calling blk_dev_integrity_init+0x0/0x22 @ 1
[ 0.011083] initcall blk_dev_integrity_init+0x0/0x22 returned 0 after 0 usecs
[ 0.011095] calling pci_slot_init+0x0/0x37 @ 1
[ 0.011109] initcall pci_slot_init+0x0/0x37 returned 0 after 0 usecs
[ 0.011119] calling fbmem_init+0x0/0x7c @ 1
[ 0.011153] initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs
[ 0.011165] calling acpi_init+0x0/0x2cf @ 1
[ 0.011173] ACPI: Interpreter disabled.
[ 0.011181] initcall acpi_init+0x0/0x2cf returned -19 after 0 usecs
[ 0.011191] calling dock_init+0x0/0x79 @ 1
[ 0.011200] initcall dock_init+0x0/0x79 returned 0 after 0 usecs
[ 0.011209] calling acpi_pci_root_init+0x0/0x21 @ 1
[ 0.011218] initcall acpi_pci_root_init+0x0/0x21 returned 0 after 0 usecs
[ 0.011228] calling acpi_pci_link_init+0x0/0x3b @ 1
[ 0.011238] initcall acpi_pci_link_init+0x0/0x3b returned 0 after 0 usecs
[ 0.011248] calling pnp_init+0x0/0xa @ 1
[ 0.011276] initcall pnp_init+0x0/0xa returned 0 after 0 usecs
[ 0.011287] calling __setup_shutdown_event+0x0/0x1b @ 1
[ 0.011297] initcall __setup_shutdown_event+0x0/0x1b returned 0 after 0 usecs
[ 0.011307] calling xenbus_probe_backend_init+0x0/0x1f @ 1
[ 0.011338] initcall xenbus_probe_backend_init+0x0/0x1f returned 0 after 0
usecs
[ 0.011350] calling xenbus_probe_frontend_init+0x0/0x1f @ 1
[ 0.011379] initcall xenbus_probe_frontend_init+0x0/0x1f returned 0 after 0
usecs
[ 0.011390] calling balloon_init+0x0/0x22f @ 1
[ 0.011398] xen_balloon: Initialising balloon driver with page order 0.
[ 0.011440] last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
[ 0.047958] initcall balloon_init+0x0/0x22f returned 0 after 35156 usecs
[ 0.048001] calling misc_init+0x0/0x95 @ 1
[ 0.048083] initcall misc_init+0x0/0x95 returned 0 after 3906 usecs
[ 0.048096] calling vga_arb_device_init+0x0/0x62 @ 1
[ 0.048173] vgaarb: loaded
[ 0.048182] initcall vga_arb_device_init+0x0/0x62 returned 0 after 0 usecs
[ 0.048194] calling serio_init+0x0/0x6c @ 1
[ 0.048320] initcall serio_init+0x0/0x6c returned 0 after 0 usecs
[ 0.048332] calling input_init+0x0/0x108 @ 1
[ 0.048367] initcall input_init+0x0/0x108 returned 0 after 0 usecs
[ 0.048378] calling rtc_init+0x0/0x59 @ 1
[ 0.048400] initcall rtc_init+0x0/0x59 returned 0 after 0 usecs
[ 0.048412] calling power_supply_class_init+0x0/0x2b @ 1
[ 0.048435] initcall power_supply_class_init+0x0/0x2b returned 0 after 0
usecs
[ 0.048447] calling hwmon_init+0x0/0xe7 @ 1
[ 0.048469] initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.048482] calling pci_subsys_init+0x0/0xdc @ 1
[ 0.048491] PCI: Probing PCI hardware
[ 0.048500] PCI: Probing PCI hardware (bus 00)
[ 0.049132] pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f]
[ 0.049291] pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f]
[ 0.049473] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.049778] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
ACPI/GPIO/TCO
[ 0.049793] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.049864] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.049887] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.049909] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.049931] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.049953] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f]
[ 0.049976] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.050128] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.050373] pci 0000:01:1c.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
[ 0.050796] pci 0000:01:1e.0: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
[ 0.051132] pci 0000:00:02.0: bridge io port: [0x3000-0x4fff]
[ 0.051147] pci 0000:00:02.0: bridge 32bit mmio: [0xfc100000-0xfc8fffff]
[ 0.051318] pci 0000:02:01.0: reg 10 64bit mmio: [0xfc200000-0xfc2fffff]
[ 0.051342] pci 0000:02:01.0: reg 18 io port: [0x3000-0x30ff]
[ 0.051671] pci 0000:02:03.0: reg 10 64bit mmio: [0xfc300000-0xfc31ffff]
[ 0.051721] pci 0000:02:03.0: reg 20 io port: [0x3400-0x[ 1.994324]
Initramfs unpacking failed: broken padding
[ 1.999351] Freeing initrd memory: 99856k freed
[ 2.137130] initcall populate_rootfs+0x0/0xec returned 0 after 2029723 usecs
[ 2.137155] calling pci_iommu_init+0x0/0x32 @ 1
[ 2.137165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.137176] DMA: Placing 64MB software IO TLB between cd537000 - d1537000
[ 2.137186] DMA: software IO TLB at phys 0xd537000 - 0x11537000
[ 2.137196] initcall pci_iommu_init+0x0/0x32 returned 0 after 30 usecs
[ 2.137207] calling i8259A_init_sysfs+0x0/0x19 @ 1
[ 2.137320] initcall i8259A_init_sysfs+0x0/0x19 returned 0 after 99 usecs
[ 2.137332] calling sbf_init+0x0/0xd0 @ 1
[ 2.137341] initcall sbf_init+0x0/0xd0 returned 0 after 0 usecs
[ 2.137351] calling i8237A_init_sysfs+0x0/0x19 @ 1
[ 2.137384] initcall i8237A_init_sysfs+0x0/0x19 returned 0 after 21 usecs
[ 2.137396] calling add_rtc_cmos+0x0/0x77 @ 1
[ 2.137455] platform rtc_cmos: registered platform RTC device (no PNP device
found)
[ 2.137468] initcall add_rtc_cmos+0x0/0x77 returned 0 after 60 usecs
[ 2.137481] calling cache_sysfs_init+0x0/0x51 @ 1
[ 2.137490] initcall cache_sysfs_init+0x0/0x51 returned 0 after 0 usecs
[ 2.137500] calling mce_init_device+0x0/0xd1 @ 1
[ 2.137617] initcall mce_init_device+0x0/0xd1 returned 0 after 103 usecs
[ 2.137629] calling threshold_init_device+0x0/0x63 @ 1
[ 2.137640] initcall threshold_init_device+0x0/0x63 returned 0 after 0 usecs
[ 2.137651] calling thermal_throttle_init_device+0x0/0x79 @ 1
[ 2.137661] initcall thermal_throttle_init_device+0x0/0x79 returned 0 after
0 usecs
[ 2.137676] calling ioapic_init_sysfs+0x0/0x7d @ 1
[ 2.137731] initcall ioapic_init_sysfs+0x0/0x7d returned 0 after 43 usecs
[ 2.137746] calling init_vmi_clocksource+0x0/0xc2 @ 1
[ 2.137758] initcall init_vmi_clocksource+0x0/0xc2 returned 0 after 0 usecs
[ 2.137769] calling add_pcspkr+0x0/0x20 @ 1
[ 2.137803] initcall add_pcspkr+0x0/0x20 returned 0 after 22 usecs
[ 2.137815] calling init_sched_debug_procfs+0x0/0x23 @ 1
[ 2.137835] initcall init_sched_debug_procfs+0x0/0x23 returned 0 after 9
usecs
[ 2.137846] calling proc_execdomains_init+0x0/0x1a @ 1
[ 2.137860] initcall proc_execdomains_init+0x0/0x1a returned 0 after 3 usecs
[ 2.137871] calling ioresources_init+0x0/0x30 @ 1
[ 2.137887] initcall ioresources_init+0x0/0x30 returned 0 after 6 usecs
[ 2.137897] calling uid_cache_init+0x0/0x76 @ 1
[ 2.137918] initcall uid_cache_init+0x0/0x76 returned 0 after 11 usecs
[ 2.137928] calling init_posix_timers+0x0/0x149 @ 1
[ 2.137946] initcall init_posix_timers+0x0/0x149 returned 0 after 7 usecs
[ 2.137956] calling init_posix_cpu_timers+0x0/0xc2 @ 1
[ 2.137973] initcall init_posix_cpu_timers+0x0/0xc2 returned 0 after 0 usecs
[ 2.137983] calling nsproxy_cache_init+0x0/0x25 @ 1
[ 2.137995] initcall nsproxy_cache_init+0x0/0x25 returned 0 after 2 usecs
[ 2.138007] calling create_proc_profile+0x0/0x186 @ 1
[ 2.138017] initcall create_proc_profile+0x0/0x186 returned 0 after 0 usecs
[ 2.138027] calling timekeeping_init_device+0x0/0x19 @ 1
[ 2.138060] initcall timekeeping_init_device+0x0/0x19 returned 0 after 21
usecs
[ 2.138072] calling init_clocksource_sysfs+0x0/0x3f @ 1
[ 2.138108] initcall init_clocksource_sysfs+0x0/0x3f returned 0 after 24
usecs
[ 2.138120] calling init_timer_list_procfs+0x0/0x23 @ 1
[ 2.138135] initcall init_timer_list_procfs+0x0/0x23 returned 0 after 4 usecs
[ 2.138146] calling init_tstats_procfs+0x0/0x23 @ 1
[ 2.138160] initcall init_tstats_procfs+0x0/0x23 returned 0 after 3 usecs
[ 2.138170] calling futex_init+0x0/0x7d @ 1
[ 2.138205] initcall futex_init+0x0/0x7d returned 0 after 25 usecs
[ 2.138215] calling proc_dma_init+0x0/0x1a @ 1
[ 2.138229] initcall proc_dma_init+0x0/0x1a returned 0 after 3 usecs
[ 2.138239] calling proc_modules_init+0x0/0x1a @ 1
[ 2.138252] initcall proc_modules_init+0x0/0x1a returned 0 after 3 usecs
[ 2.138262] calling kallsyms_init+0x0/0x1d @ 1
[ 2.138276] initcall kallsyms_init+0x0/0x1d returned 0 after 3 usecs
[ 2.138286] calling snapshot_device_init+0x0/0xa @ 1
[ 2.138325] initcall snapshot_device_init+0x0/0xa returned 0 after 27 usecs
[ 2.138337] calling crash_save_vmcoreinfo_init+0x0/0x344 @ 1
[ 2.138375] initcall crash_save_vmcoreinfo_init+0x0/0x344 returned 0 after
26 usecs
[ 2.138387] calling crash_notes_memory_init+0x0/0x2d @ 1
[ 2.138404] initcall crash_notes_memory_init+0x0/0x2d returned 0 after 6
usecs
[ 2.138416] calling pid_namespaces_init+0x0/0x25 @ 1
[ 2.138428] initcall pid_namespaces_init+0x0/0x25 returned 0 after 1 usecs
[ 2.138438] calling audit_init+0x0/0x10a @ 1
[ 2.138447] audit: initializing netlink socket (disabled)
[ 2.138480] type=2000 audit(1290283016.078:1): initialized
[ 2.138493] initcall audit_init+0x0/0x10a returned 0 after 43 usecs
[ 2.138503] calling audit_tree_init+0x0/0x37 @ 1
[ 2.138515] initcall audit_tree_init+0x0/0x37 returned 0 after 2 usecs
[ 2.138525] calling init_kprobes+0x0/0x12c @ 1
[ 2.142192] initcall init_kprobes+0x0/0x12c returned 0 after 3570 usecs
[ 2.142203] calling hung_task_init+0x0/0x3c @ 1
[ 2.142318] initcall hung_task_init+0x0/0x3c returned 0 after 101 usecs
[ 2.142329] calling utsname_sysctl_init+0x0/0xd @ 1
[ 2.142368] initcall utsname_sysctl_init+0x0/0xd returned 0 after 27 usecs
[ 2.142381] calling init_tracepoints+0x0/0xa @ 1
[ 2.142393] initcall init_tracepoints+0x0/0xa returned 0 after 0 usecs
[ 2.142403] calling init_events+0x0/0x53 @ 1
[ 2.142415] initcall init_events+0x0/0x53 returned 0 after 2 usecs
[ 2.142425] calling init_sched_switch_trace+0x0/0xa @ 1
[ 2.142438] initcall init_sched_switch_trace+0x0/0xa returned 0 after 2 usecs
[ 2.142449] calling init_blk_tracer+0x0/0x4c @ 1
[ 2.142459] initcall init_blk_tracer+0x0/0x4c returned 0 after 0 usecs
[ 2.142469] calling perf_event_sysfs_init+0x0/0xf @ 1
[ 2.142487] initcall perf_event_sysfs_init+0x0/0xf returned 0 after 7 usecs
[ 2.142497] calling init_per_zone_wmark_min+0x0/0x55 @ 1
[ 2.143105] initcall init_per_zone_wmark_min+0x0/0x55 returned 0 after 582
usecs
[ 2.143117] calling kswapd_init+0x0/0x19 @ 1
[ 2.143188] initcall kswapd_init+0x0/0x19 returned 0 after 59 usecs
[ 2.143200] calling setup_vmstat+0x0/0xa4 @ 1
[ 2.143229] initcall setup_vmstat+0x0/0xa4 returned 0 after 18 usecs
[ 2.143240] calling mm_sysfs_init+0x0/0x1e @ 1
[ 2.143256] initcall mm_sysfs_init+0x0/0x1e returned 0 after 6 usecs
[ 2.143267] calling proc_vmalloc_init+0x0/0x1d @ 1
[ 2.143280] initcall proc_vmalloc_init+0x0/0x1d returned 0 after 4 usecs
[ 2.143291] calling init_emergency_pool+0x0/0x70 @ 1
[ 2.143303] initcall init_emergency_pool+0x0/0x70 returned 0 after 2 usecs
[ 2.143314] calling procswaps_init+0x0/0x1a @ 1
[ 2.143328] initcall procswaps_init+0x0/0x1a returned 0 after 4 usecs
[ 2.143338] calling hugetlb_init+0x0/0x2cc @ 1
[ 2.143349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.143392] initcall hugetlb_init+0x0/0x2cc returned 0 after 42 usecs
[ 2.143402] calling ksm_init+0x0/0x156 @ 1
[ 2.143483] initcall ksm_init+0x0/0x156 returned 0 after 68 usecs
[ 2.143494] calling slab_proc_init+0x0/0x1d @ 1
[ 2.143509] initcall slab_proc_init+0x0/0x1d returned 0 after 4 usecs
[ 2.143519] calling slab_sysfs_init+0x0/0xb0 @ 1
[ 2.145649] initcall slab_sysfs_init+0x0/0xb0 returned 0 after 2069 usecs
[ 2.145661] calling fasync_init+0x0/0x22 @ 1
[ 2.145678] initcall fasync_init+0x0/0x22 returned 0 after 6 usecs
[ 2.145689] calling proc_filesystems_init+0x0/0x1a @ 1
[ 2.145703] initcall proc_filesystems_init+0x0/0x1a returned 0 after 4 usecs
[ 2.145714] calling dnotify_init+0x0/0x6b @ 1
[ 2.145735] initcall dnotify_init+0x0/0x6b returned 0 after 11 usecs
[ 2.145745] calling inotify_setup+0x0/0xd @ 1
[ 2.145755] initcall inotify_setup+0x0/0xd returned 0 after 0 usecs
[ 2.145765] calling inotify_user_setup+0x0/0x9d @ 1
[ 2.145809] initcall inotify_user_setup+0x0/0x9d returned 0 after 33 usecs
[ 2.145820] calling aio_setup+0x0/0x5f @ 1
[ 2.145905] initcall aio_setup+0x0/0x5f returned 0 after 73 usecs
[ 2.145916] calling proc_locks_init+0x0/0x1a @ 1
[ 2.145930] initcall proc_locks_init+0x0/0x1a returned 0 after 4 usecs
[ 2.145940] calling dquot_init+0x0/0xd8 @ 1
[ 2.145948] VFS: Disk quotas dquot_6.5.2
[ 2.146028] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.146049] initcall dquot_init+0x0/0xd8 returned 0 after 96 usecs
[ 2.146059] calling proc_cmdline_init+0x0/0x1a @ 1
[ 2.146073] initcall proc_cmdline_init+0x0/0x1a returned 0 after 4 usecs
[ 2.146083] calling proc_cpuinfo_init+0x0/0x1a @ 1
[ 2.146097] initcall proc_cpuinfo_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146107] calling proc_devices_init+0x0/0x1a @ 1
[ 2.146120] initcall proc_devices_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146130] calling proc_interrupts_init+0x0/0x1a @ 1
[ 2.146143] initcall proc_interrupts_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146153] calling proc_loadavg_init+0x0/0x1a @ 1
[ 2.146167] initcall proc_loadavg_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146177] calling proc_meminfo_init+0x0/0x1a @ 1
[ 2.146190] initcall proc_meminfo_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146200] calling proc_stat_init+0x0/0x1a @ 1
[ 2.146213] initcall proc_stat_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146223] calling proc_uptime_init+0x0/0x1a @ 1
[ 2.146236] initcall proc_uptime_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146246] calling proc_version_init+0x0/0x1a @ 1
[ 2.146259] initcall proc_version_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146269] calling proc_softirqs_init+0x0/0x1a @ 1
[ 2.146282] initcall proc_softirqs_init+0x0/0x1a returned 0 after 3 usecs
[ 2.146292] calling proc_kcore_init+0x0/0x9e @ 1
[ 2.146308] initcall proc_kcore_init+0x0/0x9e returned 0 after 5 usecs
[ 2.146318] calling proc_kmsg_init+0x0/0x1d @ 1
[ 2.146331] initcall proc_kmsg_init+0x0/0x1d returned 0 after 3 usecs
[ 2.146341] calling proc_page_init+0x0/0x36 @ 1
[ 2.146358] initcall proc_page_init+0x0/0x36 returned 0 after 6 usecs
[ 2.146368] calling init_devpts_fs+0x0/0x39 @ 1
[ 2.146396] initcall init_devpts_fs+0x0/0x39 returned 0 after 17 usecs
[ 2.146406] calling init_ramfs_fs+0x0/0xa @ 1
[ 2.146417] initcall init_ramfs_fs+0x0/0xa returned 0 after 1 usecs
[ 2.146427] calling init_hugetlbfs_fs+0x0/0x7c @ 1
[ 2.146502] initcall init_hugetlbfs_fs+0x0/0x7c returned 0 after 62 usecs
[ 2.146513] calling ipc_init+0x0/0x1c @ 1
[ 2.146527] msgmni has been set to 7605
[ 2.146544] initcall ipc_init+0x0/0x1c returned 0 after 22 usecs
[ 2.146554] calling ipc_sysctl_init+0x0/0xd @ 1
[ 2.146593] initcall ipc_sysctl_init+0x0/0xd returned 0 after 27 usecs
[ 2.146603] calling init_mqueue_fs+0x0/0x93 @ 1
[ 2.146686] initcall init_mqueue_fs+0x0/0x93 returned 0 after 70 usecs
[ 2.146697] calling key_proc_init+0x0/0x4a @ 1
[ 2.146714] initcall key_proc_init+0x0/0x4a returned 0 after 7 usecs
[ 2.146725] calling selinux_nf_ip_init+0x0/0x50 @ 1
[ 2.146735] initcall selinux_nf_ip_init+0x0/0x50 returned 0 after 0 usecs
[ 2.146745] calling init_sel_fs+0x0/0x53 @ 1
[ 2.146755] initcall init_sel_fs+0x0/0x53 returned 0 after 0 usecs
[ 2.146764] calling selnl_init+0x0/0x42 @ 1
[ 2.146789] initcall selnl_init+0x0/0x42 returned 0 after 13 usecs
[ 2.146800] calling sel_netif_init+0x0/0x53 @ 1
[ 2.146810] initcall sel_netif_init+0x0/0x53 returned 0 after 0 usecs
[ 2.146820] calling sel_netnode_init+0x0/0x5c @ 1
[ 2.146830] initcall sel_netnode_init+0x0/0x5c returned 0 after 0 usecs
[ 2.146840] calling sel_netport_init+0x0/0x5c @ 1
[ 2.146849] initcall sel_netport_init+0x0/0x5c returned 0 after 0 usecs
[ 2.146859] calling aurule_init+0x0/0x2c @ 1
[ 2.146869] initcall aurule_init+0x0/0x2c returned 0 after 1 usecs
[ 2.146879] calling crypto_wq_init+0x0/0x25 @ 1
[ 2.146970] initcall crypto_wq_init+0x0/0x25 returned 0 after 55 usecs
[ 2.146982] calling crypto_algapi_init+0x0/0x8 @ 1
[ 2.147002] initcall crypto_algapi_init+0x0/0x8 returned 0 after 9 usecs
[ 2.147013] calling skcipher_module_init+0x0/0x25 @ 1
[ 2.147022] initcall skcipher_module_init+0x0/0x25 returned 0 after 0 usecs
[ 2.147032] calling chainiv_module_init+0x0/0xa @ 1
[ 2.147044] initcall chainiv_module_init+0x0/0xa returned 0 after 2 usecs
[ 2.147054] calling eseqiv_module_init+0x0/0xa @ 1
[ 2.147063] initcall eseqiv_module_init+0x0/0xa returned 0 after 0 usecs
[ 2.147073] calling md5_mod_init+0x0/0xa @ 1
[ 2.147192] initcall md5_mod_init+0x0/0xa returned 0 after 106 usecs
[ 2.147203] calling krng_mod_init+0x0/0xa @ 1
[ 2.147276] alg: No test for stdrng (krng)
[ 2.147298] initcall krng_mod_init+0x0/0xa returned 0 after 82 usecs
[ 2.147309] calling proc_genhd_init+0x0/0x30 @ 1
[ 2.147327] initcall proc_genhd_init+0x0/0x30 returned 0 after 8 usecs
[ 2.147337] calling bsg_init+0x0/0x107 @ 1
[ 2.147416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 2.147430] initcall bsg_init+0x0/0x107 returned 0 after 80 usecs
[ 2.147440] calling noop_init+0x0/0xd @ 1
[ 2.147448] io scheduler noop registered
[ 2.147457] initcall noop_init+0x0/0xd returned 0 after 8 usecs
[ 2.147467] calling as_init+0x0/0xd @ 1
[ 2.147474] io scheduler anticipatory registered
[ 2.147483] initcall as_init+0x0/0xd returned 0 after 8 usecs
[ 2.147493] calling deadline_init+0x0/0xd @ 1
[ 2.147501] io scheduler deadline registered
[ 2.147510] initcall deadline_init+0x0/0xd returned 0 after 7 usecs
[ 2.147520] calling cfq_init+0x0/0x84 @ 1
[ 2.147590] io scheduler cfq registered (default)
[ 2.147601] initcall cfq_init+0x0/0x84 returned 0 after 69 usecs
[ 2.147611] calling percpu_counter_startup+0x0/0x2c @ 1
[ 2.147622] initcall percpu_counter_startup+0x0/0x2c returned 0 after 1 usecs
[ 2.147638] calling audit_classes_init+0x0/0x4b @ 1
[ 2.147655] initcall audit_classes_init+0x0/0x4b returned 0 after 7 usecs
[ 2.147666] calling pci_proc_init+0x0/0x55 @ 1
[ 2.147795] initcall pci_proc_init+0x0/0x55 returned 0 after 116 usecs
[ 2.147806] calling pcie_portdrv_init+0x0/0x3b @ 1
[ 2.147956] initcall pcie_portdrv_init+0x0/0x3b returned 0 after 136 usecs
[ 2.147974] calling aer_service_init+0x0/0x22 @ 1
[ 2.148004] initcall aer_service_init+0x0/0x22 returned 0 after 16 usecs
[ 2.148011] calling pcifront_init+0x0/0x42 @ 1
[ 2.148011] initcall pcifront_init+0x0/0x42 returned 0 after 15 usecs
[ 2.148011] calling fb_console_init+0x0/0xf6 @ 1
[ 2.148011] initcall fb_console_init+0x0/0xf6 returned 0 after 21 usecs
[ 2.148011] calling xenfb_init+0x0/0x4b @ 1
[ 2.148011] initcall xenfb_init+0x0/0x4b returned -19 after 0 usecs
[ 2.148011] calling vesafb_init+0x0/0x1f3 @ 1
[ 2.148180] initcall vesafb_init+0x0/0x1f3 returned 0 after 53 usecs
[ 2.148192] calling efifb_init+0x0/0x1af @ 1
[ 2.148218] initcall efifb_init+0x0/0x1af returned -19 after 16 usecs
[ 2.148228] calling acpi_reserve_resources+0x0/0xc4 @ 1
[ 2.148239] initcall acpi_reserve_resources+0x0/0xc4 returned 0 after 0 usecs
[ 2.148250] calling irqrouter_init_sysfs+0x0/0x2d @ 1
[ 2.148260] initcall irqrouter_init_sysfs+0x0/0x2d returned 0 after 0 usecs
[ 2.148294] calling pnpbios_thread_init+0x0/0x47 @ 1
[ 2.148368] initcall pnpbios_thread_init+0x0/0x47 returned 0 after 60 usecs
[ 2.148380] calling isapnp_init+0x0/0x61b @ 1
[ 2.148407] isapnp: Scanning for PnP cards...
[ 2.506477] isapnp: No Plug & Play device found
[ 2.506489] initcall isapnp_init+0x0/0x61b returned 0 after 349705 usecs
[ 2.506500] calling xenbus_probe_initcall+0x0/0x33 @ 1
[ 2.506509] initcall xenbus_probe_initcall+0x0/0x33 returned 0 after 0 usecs
[ 2.506520] calling gntdev_init+0x0/0x2e @ 1
[ 2.506586] initcall gntdev_init+0x0/0x2e returned 0 after 54 usecs
[ 2.506598] calling pciback_init+0x0/0x10c @ 1
[ 2.506686] initcall pciback_init+0x0/0x10c returned 0 after 75 usecs
[ 2.506698] calling blkif_init+0x0/0x12e @ 1
[ 2.513387] initcall blkif_init+0x0/0x12e returned 0 after 6516 usecs
[ 2.513403] calling netback_init+0x0/0x32c @ 1
[ 2.515664] registering netback
[ 2.516010] initcall netback_init+0x0/0x32c returned 0 after 2527 usecs
[ 2.516018] calling hypervisor_subsys_init+0x0/0x1d @ 1
[ 2.516018] initcall hypervisor_subsys_init+0x0/0x1d returned 0 after 0 usecs
[ 2.516018] calling hyper_sysfs_init+0x0/0xc0 @ 1
[ 2.516018] initcall hyper_sysfs_init+0x0/0xc0 returned 0 after 11 usecs
[ 2.516018] calling platform_pci_module_init+0x0/0x20 @ 1
[ 2.516018] initcall platform_pci_module_init+0x0/0x20 returned -19 after 0
usecs
[ 2.516018] calling rand_initialize+0x0/0x21 @ 1
[ 2.516018] initcall rand_initialize+0x0/0x21 returned 0 after 15 usecs
[ 2.516018] calling tty_init+0x0/0xd4 @ 1
[ 2.518552] initcall tty_init+0x0/0xd4 returned 0 after 2352 usecs
[ 2.518564] calling pty_init+0x0/0x295 @ 1
[ 2.518654] initcall pty_init+0x0/0x295 returned 0 after 78 usecs
[ 2.518666] calling sysrq_init+0x0/0x1d @ 1
[ 2.518687] initcall sysrq_init+0x0/0x1d returned 0 after 10 usecs
[ 2.518697] calling xen_hvc_init+0x0/0xc4 @ 1
[ 2.519044] initcall xen_hvc_init+0x0/0xc4 returned 0 after 328 usecs
[ 2.519055] calling init+0x0/0xa @ 1
[ 2.519083] initcall init+0x0/0xa returned 0 after 17 usecs
[ 2.519093] calling hpet_init+0x0/0x53 @ 1
[ 2.519194] initcall hpet_init+0x0/0x53 returned -19 after 88 usecs
[ 2.519205] calling agp_init+0x0/0x1d @ 1
[ 2.519214] Linux agpgart interface v0.103
[ 2.519223] initcall agp_init+0x0/0x1d returned 0 after 8 usecs
[ 2.519233] calling agp_ali_init+0x0/0x20 @ 1
[ 2.519269] initcall agp_ali_init+0x0/0x20 returned 0 after 25 usecs
[ 2.519280] calling agp_ati_init+0x0/0x20 @ 1
[ 2.519316] initcall agp_ati_init+0x0/0x20 returned 0 after 24 usecs
[ 2.519327] calling agp_amdk7_init+0x0/0x20 @ 1
[ 2.519356] initcall agp_amdk7_init+0x0/0x20 returned 0 after 18 usecs
[ 2.519367] calling agp_amd64_init+0x0/0x93 @ 1
[ 2.519402] initcall agp_amd64_init+0x0/0x93 returned -19 after 23 usecs
[ 2.519413] calling agp_efficeon_init+0x0/0x35 @ 1
[ 2.519443] initcall agp_efficeon_init+0x0/0x35 returned 0 after 19 usecs
[ 2.519455] calling agp_intel_init+0x0/0x20 @ 1
[ 2.519491] initcall agp_intel_init+0x0/0x20 returned 0 after 24 usecs
[ 2.519502] calling agp_nvidia_init+0x0/0x20 @ 1
[ 2.519532] initcall agp_nvidia_init+0x0/0x20 returned 0 after 19 usecs
[ 2.519544] calling agp_sis_init+0x0/0x20 @ 1
[ 2.519575] initcall agp_sis_init+0x0/0x20 returned 0 after 20 usecs
[ 2.519586] calling agp_serverworks_init+0x0/0x20 @ 1
[ 2.519617] initcall agp_serverworks_init+0x0/0x20 returned 0 after 19 usecs
[ 2.519629] calling agp_via_init+0x0/0x20 @ 1
[ 2.519661] initcall agp_via_init+0x0/0x20 returned 0 after 21 usecs
[ 2.519673] calling serial8250_init+0x0/0x10d @ 1
[ 2.519682] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.519978] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.520206] initcall serial8250_init+0x0/0x10d returned 0 after 509 usecs
[ 2.520219] calling serial8250_pnp_init+0x0/0xa @ 1
[ 2.520246] initcall serial8250_pnp_init+0x0/0xa returned 0 after 16 usecs
[ 2.520257] calling serial8250_pci_init+0x0/0x11 @ 1
[ 2.520302] initcall serial8250_pci_init+0x0/0x11 returned 0 after 33 usecs
[ 2.520313] calling isa_bus_init+0x0/0x2f @ 1
[ 2.520355] initcall isa_bus_init+0x0/0x2f returned 0 after 30 usecs
[ 2.520368] calling topology_sysfs_init+0x0/0x40 @ 1
[ 2.520389] initcall topology_sysfs_init+0x0/0x40 returned 0 after 9 usecs
[ 2.520399] calling net_olddevs_init+0x0/0x7e @ 1
[ 2.520415] initcall net_olddevs_init+0x0/0x7e r[ 3.394429] e1000:
0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d2
[ 3.403780] calling spi_transport_init+0x0/0x60 [scsi_transport_spi] @ 90
[ 3.404467] initcall spi_transport_init+0x0/0x60 [scsi_transport_spi]
returned 0 after 648 usecs
[ 3.412307] calling piix_ide_init+0x0/0x9e [piix] @ 70
[ 3.412374] piix 0000:00:1f.1: IDE controller (0x8086:0x248b rev 0x02)
[ 3.412410] PIIX_IDE 0000:00:1f.1: found PCI INT A -> IRQ 7
[ 3.412559] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 3.412578] ide0: BM-DMA at 0x2060-0x2067
[ 3.412620] ide1: BM-DMA at 0x2068-0x206f
[ 3.412646] Probing IDE interface ide0...
[ 3.421641] calling ahd_linux_init+0x0/0x21d [aic79xx] @ 91
[ 3.421732] aic79xx 0000:03:02.0: found PCI INT A -> IRQ 5
[ 3.421809] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:01.0
[ 3.421823] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.0
[ 3.421837] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.1
[ 3.421856] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:03:02.1
[ 3.562359] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.562454] e1000 0000:02:03.1: found PCI INT B -> IRQ 5
[ 3.562534] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:01.0
[ 3.562549] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
[ 3.562568] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
[ 3.562583] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.1
[ 3.835938] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit)
00:30:48:2d:3e:d3
[ 3.871055] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.871535] initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after
740625 usecs
[ 4.228097] Probing IDE interface ide1...
[ 4.964251] hdc: CD-224E, ATAPI CD/DVD-ROM drive
[ 5.636182] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.636816] hdc: UDMA/33 mode selected
[ 5.637477] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.637509] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.638208] initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 2173712
usecs
[ 5.646801] ide_cd_mod: Unknown symbol register_cdrom
[ 5.646900] ide_cd_mod: Unknown symbol cdrom_ioctl
[ 5.647364] ide_cd_mod: Unknown symbol cdrom_mode_select
[ 5.647981] ide_cd_mod: Unknown symbol cdrom_media_changed
[ 5.648129] ide_cd_mod: Unknown symbol cdrom_get_last_written
[ 5.648219] ide_cd_mod: Unknown symbol cdrom_mode_sense
[ 5.648560] ide_cd_mod: Unknown symbol cdrom_get_media_event
[ 5.648830] ide_cd_mod: Unknown symbol cdrom_release
[ 5.649596] ide_cd_mod: Unknown symbol cdrom_open
[ 5.650077] ide_cd_mod: Unknown symbol unregister_cdrom
[ 5.650439] ide_cd_mod: Unknown symbol cdrom_number_of_slots
[ 5.650537] ide_cd_mod: Unknown symbol init_cdrom_command
[ 18.544044] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 18.544046] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 18.544048] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
101-133MHz, 512 SCBs
[ 18.544637] aic79xx 0000:03:02.1: found PCI INT B -> IRQ 5
[ 18.544719] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:01.0
[ 18.544739] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.0
[ 18.544754] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.1
[ 18.544768] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:03:02.0
[ 33.664039] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 33.664042] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 33.664044] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X
101-133MHz, 512 SCBs
[ 33.664550] initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after
29534066 usecs
[ 33.722012] calling wait_scan_init+0x0/0x8 [scsi_wait_scan] @ 99
[ 33.722037] initcall wait_scan_init+0x0/0x8 [scsi_wait_scan] returned 0
after 2 usecs
[ 33.771825] calling md_init+0x0/0xb8 [md_mod] @ 109
[ 33.771895] initcall md_init+0x0/0xb8 [md_mod] returned 0 after 44 usecs
[ 33.819731] dm_crypt: Unknown symbol dm_put_device
[ 33.820405] dm_crypt: Unknown symbol dm_unregister_target
[ 33.820708] dm_crypt: Unknown symbol dm_register_target
[ 33.820960] dm_crypt: Unknown symbol dm_table_get_mode
[ 33.821069] dm_crypt: Unknown symbol dm_get_device
[ 39.816057] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0
0x0 0x0 0x24 0x0
[ 39.817620] scsi 0:0:0:0: Command already completed
[ 49.816051] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0
0x0 0x0 0x0 0x0
[ 49.817599] scsi 0:0:0:0: Command already completed
[ 49.817638] scsi 0:0:0:0: Attempting to queue a TARGET RESET message:CDB:
0x12 0x0 0x0 0x0 0x24 0x0
[ 49.817674] scsi0: Device reset code sleeping
[ 54.816059] scsi 1:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0
0x0 0x0 0x24 0x0
[ 54.817613] scsi 1:0:0:0: Command already completed
[ 54.817663] scsi0: Device reset timer expired (active 1)
[ 54.817672] scsi0: Device reset returning 0x2003
[ 54.818208] Recovery SCB completes
[ 64.816051] scsi 1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0
0x0 0x0 0x0 0x0
[ 64.817598] scsi 1:0:0:0: Command already completed
[ 64.817637] scsi 1:0:0:0: Attempting to queue a TARGET RESET message:CDB:
0x12 0x0 0x0 0x0 0x24 0x0
[ 64.817673] scsi1: Device reset code sleeping
[ 69.816050] scsi1: Device reset timer expired (active 1)
[ 69.816066] scsi1: Device reset returning 0x2003
[ 69.816606] Recovery SCB completes
[ 74.820028] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0
0x0 0x0 0x0 0x0
[ 74.821577] scsi 0:0:0:0: Command already completed
[ 74.821613] scsi 0:0:0:0: Device offlined - not ready after error recovery
[ 89.820034] scsi 1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0
0x0 0x0 0x0 0x0
[ 89.821581] scsi 1:0:0:0: Command already completed
[ 89.821617] scsi 1:0:0:0: Device offlined - not ready after error recovery
[ 95.816051] scsi 0:0:1:0: Attempting to queue an ABORT message:CDB: 0x12 0x0
0x0 0x0 0x24 0x0
[ 95.817824] scsi 0:0:1:0: Command already completed
--
Attachment:
pgpspue71azLZ.pgp _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |