[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] aic79xx failures with pvops dom0 2.6.32.25



Don't know if it has anything to do with it, but my eye fell on
"    1.994324] Initramfs unpacking failed: broken padding"
just after the pci-probing.



Saturday, November 20, 2010, 10:01:10 PM, you wrote:


> I'm having difficulty booting Xen on a particular machine that has an
> aic79xx controller, it works elsewhere fine. The boot gets into a weird
> loop where the aic79xxx ATA devices kept not coming up. It appeared to
> be IRQ related as it looks like the aic79xxx card was sharing an IRQ
> with the e1000. The first error seems to be: 

>      [ 1.359019] uhci_hcd 0000:00:1d.0: request interrupt 11 failed 

> and then a lot of irq related stuff fails after that.

> I was first working with the Debian linux-image-2.6.32-5-xen-686 kernel,
> along with Xen 4.0.1, booting with various kernel parameters: noapic,
> noacpi, apic=off, but none seemed to improve the situation[0]. If you
> are interested in seeing that bootlog, you can view it here:
> http://micah.riseup.net/pastes/2010-11-19T182929.XDFfvhPZhJ

> My next step was to replace the hypervisor with upstream (xen.org)
> xen-4.0-testing.hg (ie. xen-4.0.2-rc), as I understand that there have
> been some IRQ-related bug fixes there. I wanted to see if the problem
> was the Xen hypervisor. But same problem, this time with more ASCII art
> (I added some more debugging kernel parameters this time):
> http://micah.riseup.net/pastes/2010-11-19T192911.ckgFXgpv4Y

> I also tried with acpi=off, but again no changes.

> So the next step was to try the upstream dom0 kernel to see if that
> helps. I used: "git checkout -b xen/stable-2.6.32.x
> origin/xen/stable-2.6.32.x" and did a "make oldconfig" basing the kernel
> config file from the debian /boot/config-2.6.32-5-xen-686. 

> I let it boot until it dropped to the initramfs shell, the log follows,
> same issue. At this point I'm not sure what the next step is, I'm happy
> to do any more debugging if anyone has any suggestions for what I should
> do.

> Thanks!
> micah

>  __  __            _  _    ___   ____              _                   
>  \ \/ /___ _ __   | || |  / _ \ |___ \    _ __ ___/ |   _ __  _ __ ___ 
>   \  // _ \ '_ \  | || |_| | | |  __) |__| '__/ __| |__| '_ \| '__/ _ \
>   /  \  __/ | | | |__   _| |_| | / __/|__| | | (__| |__| |_) | | |  __/
>  /_/\_\___|_| |_|    |_|(_)___(_)_____|  |_|  \___|_|  | .__/|_|  \___|
>                                                        |_|             
> (XEN) Xen version 4.0.2-rc1-pre (root@xxxxxxxxxx) (gcc version 4.4.5 (Debian 
> 4.4.5-6) ) Fri Nov 19 15:25:02 PST 2010
> (XEN) Latest ChangeSet: Tue Nov 16 11:54:48 2010 +0000 21386:e9156d9d996b
> (XEN) Bootloader: GRUB 1.98+20100804-7
> (XEN) Command line: placeholder dom0_mem=512M dom0_max_vcpus=1 loglvl=all 
> guest_loglvl=all lapic=debug apic_verbosity=debug apic=debug console=com1 
> com1=115200,8n1
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
> (XEN)  EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN)  Found 2 MBR signatures
> (XEN)  Found 2 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009f800 (usable)
> (XEN)  000000000009f800 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000f7ef9000 (usable)
> (XEN)  00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
> (XEN)  00000000f7f00000 - 00000000f7f80000 (usable)
> (XEN)  00000000f7f80000 - 00000000f8000000 (reserved)
> (XEN)  00000000fec00000 - 00000000fec10000 (reserved)
> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> (XEN)  00000000ff800000 - 00000000ffc00000 (reserved)
> (XEN)  00000000fff00000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 0000000208000000 (usable)
> (XEN) System RAM: 8191MB (8387680kB)
> (XEN) ACPI Error (tbxfroot-0220): A valid RSDP was not found [20070126]
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000208000000
> (XEN) Xen heap: 8MB (8856kB)
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000f6ca0
> (XEN) DMI present.
> (XEN) Using APIC driver default
> (XEN) Intel MultiProcessor Specification v1.4
> (XEN)     Virtual Wire compatibility mode.
> (XEN) OEM ID:   Product ID: Kings Canyon APIC at: 0xFEE00000
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) Processor #6 15:2 APIC version 20
> (XEN) Processor #1 15:2 APIC version 20
> (XEN) Processor #7 15:2 APIC version 20
> (XEN) I/O APIC #2 Version 32 at 0xFEC00000.
> (XEN) I/O APIC #3 Version 32 at 0xFEC80000.
> (XEN) I/O APIC #4 Version 32 at 0xFEC80400.
> (XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
> (XEN) Processors: 4
> (XEN) mapped APIC to fff7e000 (fee00000)
> (XEN) mapped IOAPIC to fff7d000 (fec00000)
> (XEN) mapped IOAPIC to fff7c000 (fec80000)
> (XEN) mapped IOAPIC to fff7b000 (fec80400)
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 3199.214 MHz processor.
> (XEN) CPU0: Intel Extended MCE MSRs (12) available
> (XEN) Intel machine check reporting enabled
> (XEN) I/O virtualisation disabled
> (XEN) Getting VERSION: 50014
> (XEN) Getting VERSION: 50014
> (XEN) Getting ID: 0
> (XEN) Getting LVT0: 700
> (XEN) Getting LVT1: 400
> (XEN) enabled ExtINT on CPU#0
> (XEN) masked ExtINT on CPU#1
> (XEN) CPU1: Intel Extended MCE MSRs (12) available
> (XEN) masked ExtINT on CPU#2
> (XEN) CPU2: Intel Extended MCE MSRs (12) available
> (XEN) masked ExtINT on CPU#3
> (XEN) CPU3: Intel Extended MCE MSRs (12) available
> (XEN) Total of 4 processors activated.
> (XEN) ExtINT not setup in hardware but reported by MP table
> (XEN) ENABLING IO-APIC IRQs
(XEN)  ->> Using new ACK method
> (XEN) init IO_APIC IRQs
> (XEN)  IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23, 
> 3-0, 3-1, 3-2, 3-3, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 
> 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-8, 
> 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 
> 4-22, 4-23 not connected.
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
> (XEN) number of MP IRQ sources: 23.
> (XEN) number of IO-APIC #2 registers: 24.
> (XEN) number of IO-APIC #3 registers: 24.
> (XEN) number of IO-APIC #4 registers: 24.
> (XEN) testing the IO APIC.......................
> (XEN) IO APIC #2......
> (XEN) .... register #00: 02008000
> (XEN) .......    : physical APIC id: 02
> (XEN) .......    : Delivery Type: 1
> (XEN) .......    : LTS          : 0
> (XEN) .... register #01: 00178020
> (XEN) .......     : max redirection entries: 0017
> (XEN) .......     : PRQ implemented: 1
> (XEN) .......     : IO APIC version: 0020
> (XEN) .... register #02: 00000000
> (XEN) .......     : arbitration: 00
> (XEN) .... register #03: 00000001
> (XEN) .......     : Boot DT    : 1
> (XEN) .... IRQ redirection table:
> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> (XEN)  01 001 01  0    0    0   0   0    1    1    28
> (XEN)  02 001 01  0    0    0   0   0    1    1    F0
> (XEN)  03 001 01  0    0    0   0   0    1    1    30
> (XEN)  04 001 01  0    0    0   0   0    1    1    F1
> (XEN)  05 001 01  0    0    0   0   0    1    1    38
> (XEN)  06 001 01  0    0    0   0   0    1    1    40
> (XEN)  07 001 01  0    0    0   0   0    1    1    48
> (XEN)  08 001 01  0    0    0   0   0    1    1    50
> (XEN)  09 001 01  0    0    0   0   0    1    1    58
> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
> (XEN)  0c 001 01  0    0    0   0   0    1    1    60
> (XEN)  0d 001 01  0    0    0   0   0    1    1    68
> (XEN)  0e 001 01  0    0    0   0   0    1    1    70
> (XEN)  0f 001 01  0    0    0   0   0    1    1    78
> (XEN)  10 001 01  1    1    0   1   0    1    1    88
> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> (XEN)  12 001 01  1    1    0   1   0    1    1    90
> (XEN)  13 001 01  1    1    0   1   0    1    1    98
> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> (XEN) IO APIC #3......
> (XEN) .... register #00: 03000000
> (XEN) .......    : physical APIC id: 03
> (XEN) .......    : Delivery Type: 0
> (XEN) .......    : LTS          : 0
> (XEN) .... register #01: 00178020
> (XEN) .......     : max redirection entries: 0017
> (XEN) .......     : PRQ implemented: 1
> (XEN) .......     : IO APIC version: 0020
> (XEN) .... register #02: 03000000
> (XEN) .......     : arbitration: 03
> (XEN) .... register #03: 00000001
> (XEN) .......     : Boot DT    : 1
> (XEN) .... IRQ redirection table:
> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> (XEN)  00 000 00  1    0    0   0   0    0    0    00
> (XEN)  01 000 00  1    0    0   0   0    0    0    00
> (XEN)  02 000 00  1    0    0   0   0    0    0    00
> (XEN)  03 000 00  1    0    0   0   0    0    0    00
> (XEN)  04 001 01  1    1    0   1   0    1    1    A0
> (XEN)  05 001 01  1    1    0   1   0    1    1    A8
> (XEN)  06 000 00  1    0    0   0   0    0    0    00
> (XEN)  07 000 00  1    0    0   0   0    0    0    00
> (XEN)  08 000 00  1    0    0   0   0    0    0    00
> (XEN)  09 000 00  1    0    0   0   0    0    0    00
> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> (XEN) IO APIC #4......
> (XEN) .... register #00: 04000000
> (XEN) .......    : physical APIC id: 04
> (XEN) .......    : Delivery Type: 0
> (XEN) .......    : LTS          : 0
> (XEN) .... register #01: 00178020
> (XEN) .......     : max redirection entries: 0017
> (XEN) .......     : PRQ implemented: 1
> (XEN) .......     : IO APIC version: 0020
> (XEN) .... register #02: 04000000
> (XEN) .......     : arbitration: 04
> (XEN) .... register #03: 00000001
> (XEN) .......     : Boot DT    : 1
> (XEN) .... IRQ redirection table:
> (XEN)  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> (XEN)  00 001 01  1    1    0   1   0    1    1    B0
> (XEN)  01 000 00  1    0    0   0   0    0    0    00
> (XEN)  02 000 00  1    0    0   0   0    0    0    00
> (XEN)  03 000 00  1    0    0   0   0    0    0    00
> (XEN)  04 000 00  1    0    0   0   0    0    0    00
> (XEN)  05 000 00  1    0    0   0   0    0    0    00
> (XEN)  06 001 01  1    1    0   1   0    1    1    B8
> (XEN)  07 001 01  1    1    0   1   0    1    1    C0
> (XEN)  08 000 00  1    0    0   0   0    0    0    00
> (XEN)  09 000 00  1    0    0   0   0    0    0    00
> (XEN)  0a 000 00  1    0    0   0   0    0    0    00
> (XEN)  0b 000 00  1    0    0   0   0    0    0    00
> (XEN)  0c 000 00  1    0    0   0   0    0    0    00
> (XEN)  0d 000 00  1    0    0   0   0    0    0    00
> (XEN)  0e 000 00  1    0    0   0   0    0    0    00
> (XEN)  0f 000 00  1    0    0   0   0    0    0    00
> (XEN)  10 000 00  1    0    0   0   0    0    0    00
> (XEN)  11 000 00  1    0    0   0   0    0    0    00
> (XEN)  12 000 00  1    0    0   0   0    0    0    00
> (XEN)  13 000 00  1    0    0   0   0    0    0    00
> (XEN)  14 000 00  1    0    0   0   0    0    0    00
> (XEN)  15 000 00  1    0    0   0   0    0    0    00
> (XEN)  16 000 00  1    0    0   0   0    0    0    00
> (XEN)  17 000 00  1    0    0   0   0    0    0    00
> (XEN) Using vector-based indexing
> (XEN) IRQ to pin mappings:
(XEN) IRQ240 ->> 0:2
(XEN) IRQ40 ->> 0:1
(XEN) IRQ48 ->> 0:3
(XEN) IRQ241 ->> 0:4
(XEN) IRQ56 ->> 0:5
(XEN) IRQ64 ->> 0:6
(XEN) IRQ72 ->> 0:7
(XEN) IRQ80 ->> 0:8
(XEN) IRQ88 ->> 0:9
(XEN) IRQ96 ->> 0:12
(XEN) IRQ104 ->> 0:13
(XEN) IRQ112 ->> 0:14
(XEN) IRQ120 ->> 0:15
(XEN) IRQ136 ->> 0:16
(XEN) IRQ144 ->> 0:18
(XEN) IRQ152 ->> 0:19
(XEN) IRQ160 ->> 1:4
(XEN) IRQ168 ->> 1:5
(XEN) IRQ176 ->> 2:0
(XEN) IRQ184 ->> 2:6
(XEN) IRQ192 ->> 2:7
> (XEN) .................................... done.
> (XEN) Using local APIC timer interrupts.
> (XEN) calibrating APIC timer ...
> (XEN) ..... CPU clock speed is 3199.1498 MHz.
> (XEN) ..... host bus clock speed is 133.2977 MHz.
> (XEN) ..... bus_scale = 0x0000887F
> (XEN) checking TSC synchronization across 4 CPUs: passed.
> (XEN) Platform timer is 1.193MHz PIT
> Ã(XEN) Allocated console ring of 32 KiB.
> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed
> (XEN) microcode.c:73:d32767 microcode: CPU2 resumed
> (XEN) Brought up 4 CPUs
> (XEN) microcode.c:73:d32767 microcode: CPU3 resumed
> (XEN) ACPI sleep modes: S3
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN)  Xen  kernel: 32-bit, PAE, lsb
> (XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x166c000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000030000000->0000000038000000 (98304 pages to be 
> allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: c1000000->c166c000
> (XEN)  Init. ramdisk: c166c000->c77f0259
> (XEN)  Phys-Mach map: c77f1000->c7871000
> (XEN)  Start info:    c7871000->c787147c
> (XEN)  Page tables:   c7872000->c78b5000
> (XEN)  Boot stack:    c78b5000->c78b6000
> (XEN)  TOTAL:         c0000000->c7c00000
> (XEN)  ENTRY ADDRESS: c13e0000
> (XEN) Dom0 has maximum 1 VCPUs
> (XEN) Scrubbing Free RAM: 
> ............................................................................done.
> (XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 
> 258, t_info_first_offset 65
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
> Xen)
> (XEN) Freed 152kB init memory.
> mapping kernel into physical memory
> Xen: setup ISA identity maps
> about to get started...
> [    0.000000] Reserving virtual address space above 0xf5800000
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.32.25 (root@quelea) (gcc version 4.4.5 
> (Debian 4.4.5-6) ) #6 SMP Sat Nov 20 09:14:48 PST 2010
> [    0.000000] KERNEL supported cpus:
> [    0.000000]   Intel GenuineIntel
> [    0.000000]   AMD AuthenticAMD
> [    0.000000]   NSC Geode by NSC
> [    0.000000]   Cyrix CyrixInstead
> [    0.000000]   Centaur CentaurHauls
> [    0.000000]   Transmeta GenuineTMx86
> [    0.000000]   Transmeta TransmetaCPU
> [    0.000000]   UMC UMC UMC UMC
> [    0.000000] released 0 pages of unused memory
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  Xen: 0000000000000000 - 000000000009f800 (usable)
> [    0.000000]  Xen: 000000000009f800 - 0000000000100000 (reserved)
> [    0.000000]  Xen: 0000000000100000 - 0000000020000000 (usable)
> [    0.000000]  Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
> [    0.000000]  Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
> [    0.000000]  Xen: 00000000fec00000 - 00000000fec10000 (reserved)
> [    0.000000]  Xen: 00000000fec80000 - 00000000fec81000 (reserved)
> [    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
> [    0.000000]  Xen: 00000000fff00000 - 0000000100000000 (reserved)
> [    0.000000]  Xen: 0000000208000000 - 00000002dfef9000 (usable)
> [    0.000000] bootconsole [xenboot0] enabled
> [    0.000000] DMI present.
> [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working 
> around it.
> [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 
> (usable) ==> (reserved)
> [    0.000000] last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
> [    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
> [    0.000000] initial memory mapped : 0 - 083ff000
> [    0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
> [    0.000000]  0000000000 - 002cffe000 page 4k
> [    0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
> [    0.000000] RAMDISK: 0166c000 - 077f0259
> [    0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
> [    0.000000] 11054MB HIGHMEM available.
> [    0.000000] 719MB LOWMEM available.
> [    0.000000]   mapped low ram: 0 - 2cffe000
> [    0.000000]   low ram: 0 - 2cffe000
> [    0.000000]   node 0 low ram: 00000000 - 2cffe000
> [    0.000000]   node 0 bootmap 00010000 - 00015a00
> [    0.000000] (11 early reservations) ==> bootmem [0000000000 - 002cffe000]
> [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> 
> [0000000000 - 0000001000]
> [    0.000000]   #1 [0007872000 - 00078b5000]   XEN PAGETABLES ==> 
> [0007872000 - 00078b5000]
> [    0.000000]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> 
> [0000001000 - 0000002000]
> [    0.000000]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> 
> [0000006000 - 0000007000]
> [    0.000000]   #4 [0001000000 - 00014fb8b4]    TEXT DATA BSS ==> 
> [0001000000 - 00014fb8b4]
> [    0.000000]   #5 [000166c000 - 00077f0259]          RAMDISK ==> 
> [000166c000 - 00077f0259]
> [    0.000000]   #6 [00077f1000 - 0007872000]   XEN START INFO ==> 
> [00077f1000 - 0007872000]
> [    0.000000]   #7 [0208000000 - 02dfef9000]        XEN EXTRA
> [    0.000000]   #8 [00014fc000 - 0001509114]              BRK ==> 
> [00014fc000 - 0001509114]
> [    0.000000]   #9 [0000100000 - 0000229000]          PGTABLE ==> 
> [0000100000 - 0000229000]
> [    0.000000]   #10 [0000010000 - 0000016000]          BOOTMAP ==> 
> [0000010000 - 0000016000]
> [    0.000000] found SMP MP-table at [c00f6ca0] f6ca0
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA      0x00000010 -> 0x00001000
> [    0.000000]   Normal   0x00001000 -> 0x0002cffe
> [    0.000000]   HighMem  0x0002cffe -> 0x002dfef9
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[3] active PFN ranges
> [    0.000000]     0: 0x00000010 -> 0x0000009f
> [    0.000000]     0: 0x00000100 -> 0x00020000
> [    0.000000]     0: 0x00208000 -> 0x002dfef9
> [    0.000000] On node 0 totalpages: 1015432
> [    0.000000] free_area_init_node: node 0, pgdat c13d5b00, node_mem_map 
> c78b5200
> [    0.000000]   DMA zone: 32 pages used for memmap
> [    0.000000]   DMA zone: 0 pages reserved
> [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
> [    0.000000]   Normal zone: 1408 pages used for memmap
> [    0.000000]   Normal zone: 125568 pages, LIFO batch:31
> [    0.000000]   HighMem zone: 22110 pages used for memmap
> [    0.000000]   HighMem zone: 862363 pages, LIFO batch:31
> [    0.000000] Using APIC driver default
> [    0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
> [    0.000000] Intel MultiProcessor Specification v1.4
> [    0.000000]     Virtual Wire compatibility mode.
> [    0.000000] MPTABLE: OEM ID:  
> [    0.000000] MPTABLE: Product ID: Kings Canyon
> [    0.000000] MPTABLE: APIC at: 0xFEE00000
> [    0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
> [    0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
> [    0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
> [    0.000000] Processors: 1
> [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [    0.000000] nr_irqs_gsi: 16
> [    0.000000] PM: Registered nosave memory: 000000000009f000 - 
> 00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 
> 0000000000100000
> [    0.000000] PM: Registered nosave memory: 0000000020000000 - 
> 00000000f7ef9000
> [    0.000000] PM: Registered nosave memory: 00000000f7ef9000 - 
> 00000000f7f00000
> [    0.000000] Allocating PCI resources starting at 20000000 (gap: 
> 20000000:d7ef9000)
> [    0.000000] Booting paravirtualized kernel on Xen
> [    0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
> [    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 15 pages/cpu @cd4c7000 s37656 r0 d23784 u65536
> [    0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
> [    0.000000] pcpu-alloc: [0] 0 
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
> pages: 991882
> [    0.000000] Kernel command line: placeholder root=/dev/mapper/quelea0-root 
> ro console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
> [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
> [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> [    0.000000] Enabling fast FPU save and restore... done.
> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
> [    0.000000] Initializing CPU#0
> [    0.000000] DMA: Placing 64MB software IO TLB between cd537000 - d1537000
> [    0.000000] DMA: software IO TLB at phys 0xd537000 - 0x11537000
> [    0.000000] xen_swiotlb_fixup: buf=cd537000 size=67108864
> [    0.000000] xen_swiotlb_fixup: buf=d1597000 size=32768
> [    0.000000] Initializing HighMem for node 0 (0002cffe:002dfef9)
> [    0.000000] Memory: 256008k/12057572k available (2588k kernel code, 
> 267692k reserved, 1377k data, 396k init, 3537892k highmem)
> [    0.000000] virtual kernel memory layout:
> [    0.000000]     fixmap  : 0xf5556000 - 0xf57ff000   (2724 kB)
> [    0.000000]     pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
> [    0.000000]     vmalloc : 0xed7fe000 - 0xf4ffe000   ( 120 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xecffe000   ( 719 MB)
> [    0.000000]       .init : 0xc13e0000 - 0xc1443000   ( 396 kB)
> [    0.000000]       .data : 0xc12870a5 - 0xc13df898   (1377 kB)
> [    0.000000]       .text : 0xc1000000 - 0xc12870a5   (2588 kB)
> [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, 
> CPUs=1, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] NR_IRQS:1536
> [    0.000000] xen: --> irq=0
> [    0.000000] xen: --> irq=1
> [    0.000000] xen: --> irq=3
> [    0.000000] xen: --> irq=4
> [    0.000000] xen: --> irq=5
> [    0.000000] xen: --> irq=6
> [    0.000000] xen: --> irq=7
> [    0.000000] xen: --> irq=8
> [    0.000000] xen: --> irq=9
> [    0.000000] xen: --> irq=12
> [    0.000000] xen: --> irq=13
> [    0.000000] xen: --> irq=14
> [    0.000000] xen: --> irq=15
> [    0.000000] Console: colour VGA+ 80x25
> [    0.000000] console [hvc0] enabled, bootconsole disabled
> [    0.000000] console [hvc0] enabled, bootconsole disabled
> [    0.000000] Xen: using vcpuop timer interface
> [    0.000000] installing Xen timer for CPU 0
> [    0.000000] Detected 3199.092 MHz processor.
> [    0.004000] Calibrating delay loop (skipped), value calculated using timer 
> frequency.. 6398.18 BogoMIPS (lpj=12796368)
> [    0.004000] Security Framework initialized
> [    0.004000] SELinux:  Disabled at boot.
> [    0.004000] Mount-cache hash table entries: 512
> [    0.004000] Initializing cgroup subsys ns
> [    0.004000] Initializing cgroup subsys cpuacct
> [    0.004000] Initializing cgroup subsys devices
> [    0.004000] Initializing cgroup subsys freezer
> [    0.004000] Initializing cgroup subsys net_cls
> [    0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [    0.004000] CPU: L2 cache: 512K
> [    0.004000] CPU: L3 cache: 1024K
> [    0.004000] CPU: Unsupported number of siblings 2
> [    0.004000] mce: CPU supports 4 MCE banks
> [    0.004000] Performance Events: no PMU driver, software events only.
> [    0.004000] SMP alternatives: switching to UP code
> [    0.004323] Freeing SMP alternatives: 13k freed
> [    0.004461] calling  migration_init+0x0/0x43 @ 1
> [    0.004542] initcall migration_init+0x0/0x43 returned 0 after 0 usecs
> [    0.004554] calling  spawn_ksoftirqd+0x0/0x43 @ 1
> [    0.004601] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 0 usecs
> [    0.004615] calling  init_call_single_data+0x0/0x62 @ 1
> [    0.004626] initcall init_call_single_data+0x0/0x62 returned 0 after 0 
> usecs
> [    0.004638] calling  spawn_softlockup_task+0x0/0x5b @ 1
> [    0.004691] initcall spawn_softlockup_task+0x0/0x5b returned 0 after 0 
> usecs
> [    0.004704] calling  relay_init+0x0/0xd @ 1
> [    0.004713] initcall relay_init+0x0/0xd returned 0 after 0 usecs
> [    0.004723] calling  tracer_alloc_buffers+0x0/0x12b @ 1
> [    0.004879] initcall tracer_alloc_buffers+0x0/0x12b returned 0 after 0 
> usecs
> [    0.004891] calling  init_trace_printk+0x0/0xa @ 1
> [    0.004900] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs
> [    0.004910] Brought up 1 CPUs
> [    0.004926] CPU0 attaching NULL sched-domain.
> [    0.005155] devtmpfs: initialized
> [    0.005604] calling  init_mmap_min_addr+0x0/0xd @ 1
> [    0.005615] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs
> [    0.005627] calling  init_cpufreq_transition_notifier_list+0x0/0x14 @ 1
> [    0.005639] initcall init_cpufreq_transition_notifier_list+0x0/0x14 
> returned 0 after 0 usecs
> [    0.005652] calling  net_ns_init+0x0/0xc9 @ 1
> [    0.005723] initcall net_ns_init+0x0/0xc9 returned 0 after 0 usecs
> [    0.005737] calling  e820_mark_nvs_memory+0x0/0x2d @ 1
> [    0.005751] initcall e820_mark_nvs_memory+0x0/0x2d returned 0 after 0 usecs
> [    0.005761] calling  cpufreq_tsc+0x0/0x21 @ 1
> [    0.005771] initcall cpufreq_tsc+0x0/0x21 returned 0 after 0 usecs
> [    0.005782] calling  pci_reboot_init+0x0/0xd @ 1
> [    0.005794] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs
> [    0.005803] calling  reboot_init+0x0/0xd @ 1
> [    0.005820] initcall reboot_init+0x0/0xd returned 0 after 0 usecs
> [    0.005830] calling  init_lapic_sysfs+0x0/0x24 @ 1
> [    0.005855] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
> [    0.005870] calling  alloc_frozen_cpus+0x0/0x3 @ 1
> [    0.005880] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
> [    0.005890] calling  sysctl_init+0x0/0x25 @ 1
> [    0.006094] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs
> [    0.006105] calling  ksysfs_init+0x0/0x92 @ 1
> [    0.006125] initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs
> [    0.006136] calling  async_init+0x0/0x4a @ 1
> [    0.006188] initcall async_init+0x0/0x4a returned 0 after 0 usecs
> [    0.006199] calling  init_jiffies_clocksource+0x0/0xa @ 1
> [    0.006211] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0 
> usecs
> [    0.006222] calling  pm_init+0x0/0x4b @ 1
> [    0.006279] initcall pm_init+0x0/0x4b returned 0 after 0 usecs
> [    0.006291] calling  pm_disk_init+0x0/0xf @ 1
> [    0.006304] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs
> [    0.006316] calling  swsusp_header_init+0x0/0x22 @ 1
> [    0.006327] initcall swsusp_header_init+0x0/0x22 returned 0 after 0 usecs
> [    0.006338] calling  init_zero_pfn+0x0/0x10 @ 1
> [    0.006347] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs
> [    0.006357] calling  filelock_init+0x0/0x25 @ 1
> [    0.006367] initcall filelock_init+0x0/0x25 returned 0 after 0 usecs
> [    0.006377] calling  init_script_binfmt+0x0/0xc @ 1
> [    0.006386] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs
> [    0.006396] calling  init_elf_binfmt+0x0/0xc @ 1
> [    0.006405] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs
> [    0.006414] calling  debugfs_init+0x0/0x46 @ 1
> [    0.006429] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs
> [    0.006439] calling  securityfs_init+0x0/0x3d @ 1
> [    0.006453] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs
> [    0.006464] calling  random32_init+0x0/0xa4 @ 1
> [    0.006474] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
> [    0.006487] calling  virtio_init+0x0/0x1b @ 1
> [    0.006513] initcall virtio_init+0x0/0x1b returned 0 after 0 usecs
> [    0.006527] calling  __gnttab_init+0x0/0x1b @ 1
> [    0.006615] Grant table initialized
> [    0.006625] initcall __gnttab_init+0x0/0x1b returned 0 after 0 usecs
> [    0.006636] calling  regulator_init+0x0/0x20 @ 1
> [    0.006645] regulator: core version 0.5
> [    0.006661] initcall regulator_init+0x0/0x20 returned 0 after 0 usecs
> [    0.006672] calling  cpufreq_core_init+0x0/0x75 @ 1
> [    0.006686] initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 usecs
> [    0.006696] calling  cpuidle_init+0x0/0x2e @ 1
> [    0.006710] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs
> [    0.006720] calling  sock_init+0x0/0x4f @ 1
> [    0.006807] initcall sock_init+0x0/0x4f returned 0 after 0 usecs
> [    0.006818] calling  net_inuse_init+0x0/0x1b @ 1
> [    0.006829] initcall net_inuse_init+0x0/0x1b returned 0 after 0 usecs
> [    0.006840] calling  netpoll_init+0x0/0x2b @ 1
> [    0.006849] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs
> [    0.006859] calling  netlink_proto_init+0x0/0xf8 @ 1
> [    0.006887] NET: Registered protocol family 16
> [    0.006912] initcall netlink_proto_init+0x0/0xf8 returned 0 after 0 usecs
> [    0.006923] calling  bdi_class_init+0x0/0x31 @ 1
> [    0.006961] initcall bdi_class_init+0x0/0x31 returned 0 after 0 usecs
> [    0.006973] calling  kobject_uevent_init+0x0/0x49 @ 1
> [    0.006989] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs
> [    0.007000] calling  pcibus_class_init+0x0/0xf @ 1
> [    0.007024] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs
> [    0.007035] calling  pci_driver_init+0x0/0xa @ 1
> [    0.007067] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs
> [    0.007078] calling  backlight_class_init+0x0/0x48 @ 1
> [    0.007101] initcall backlight_class_init+0x0/0x48 returned 0 after 0 usecs
> [    0.007113] calling  xenbus_init+0x0/0x260 @ 1
> [    0.007247] initcall xenbus_init+0x0/0x260 returned 0 after 0 usecs
> [    0.007258] calling  tty_class_init+0x0/0x2b @ 1
> [    0.007280] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
> [    0.007292] calling  vtconsole_class_init+0x0/0x9b @ 1
> [    0.007345] initcall vtconsole_class_init+0x0/0x9b returned 0 after 0 usecs
> [    0.007356] calling  spi_init+0x0/0x8c @ 1
> [    0.007396] initcall spi_init+0x0/0x8c returned 0 after 0 usecs
> [    0.007408] calling  lguest_devices_init+0x0/0x160 @ 1
> [    0.007418] initcall lguest_devices_init+0x0/0x160 returned 0 after 0 usecs
> [    0.007428] calling  amd_postcore_init+0x0/0x62 @ 1
> [    0.007437] initcall amd_postcore_init+0x0/0x62 returned 0 after 0 usecs
> [    0.007448] calling  arch_kdebugfs_init+0x0/0x1a @ 1
> [    0.007463] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs
> [    0.007474] calling  init_pit_clocksource+0x0/0xa3 @ 1
> [    0.007486] initcall init_pit_clocksource+0x0/0xa3 returned 0 after 0 usecs
> [    0.007496] calling  mtrr_if_init+0x0/0x40 @ 1
> [    0.007509] initcall mtrr_if_init+0x0/0x40 returned 0 after 0 usecs
> [    0.007519] calling  ffh_cstate_init+0x0/0x23 @ 1
> [    0.007530] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
> [    0.007540] calling  acpi_pci_init+0x0/0x4d @ 1
> [    0.007549] initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs
> [    0.007560] calling  xen_pcpu_init+0x0/0x8e @ 1
> [    0.007605] sync cpu 0 get result 1 max_id 3
> [    0.007630] sync cpu 1 get result 1 max_id 3
> [    0.007655] sync cpu 2 get result 1 max_id 3
> [    0.007680] sync cpu 3 get result 1 max_id 3
> [    0.007708] initcall xen_pcpu_init+0x0/0x8e returned 1529 after 0 usecs
> [    0.007719] initcall xen_pcpu_init+0x0/0x8e returned with error code 1529 
> [    0.007729] calling  register_xen_pci_notifier+0x0/0x1b @ 1
> [    0.007739] initcall register_xen_pci_notifier+0x0/0x1b returned 0 after 0 
> usecs
> [    0.007750] calling  setup_vcpu_hotplug_event+0x0/0x1b @ 1
> [    0.007759] initcall setup_vcpu_hotplug_event+0x0/0x1b returned 0 after 0 
> usecs
> [    0.007770] calling  dmi_id_init+0x0/0x288 @ 1
> [    0.007846] initcall dmi_id_init+0x0/0x288 returned 0 after 0 usecs
> [    0.007857] calling  dma_bus_init+0x0/0x2d @ 1
> [    0.007879] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs
> [    0.007891] calling  dma_channel_table_init+0x0/0xc9 @ 1
> [    0.007908] initcall dma_channel_table_init+0x0/0xc9 returned 0 after 0 
> usecs
> [    0.007919] calling  pci_arch_init+0x0/0x56 @ 1
> [    0.009645] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
> [    0.009654] PCI: Using configuration type 1 for base access
> [    0.009676] initcall pci_arch_init+0x0/0x56 returned 0 after 3906 usecs
> [    0.009687] calling  topology_init+0x0/0x32 @ 1
> [    0.009711] initcall topology_init+0x0/0x32 returned 0 after 0 usecs
> [    0.009722] calling  mtrr_init_finialize+0x0/0x31 @ 1
> [    0.009733] initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs
> [    0.009743] calling  param_sysfs_init+0x0/0x1ea @ 1
> [    0.010473] initcall param_sysfs_init+0x0/0x1ea returned 0 after 0 usecs
> [    0.010486] calling  pm_sysrq_init+0x0/0x12 @ 1
> [    0.010496] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs
> [    0.010506] calling  audit_watch_init+0x0/0x23 @ 1
> [    0.010516] initcall audit_watch_init+0x0/0x23 returned 0 after 0 usecs
> [    0.010527] calling  init_slow_work+0x0/0x2b @ 1
> [    0.010536] initcall init_slow_work+0x0/0x2b returned 0 after 0 usecs
> [    0.010546] calling  default_bdi_init+0x0/0x92 @ 1
> [    0.010695] initcall default_bdi_init+0x0/0x92 returned 0 after 0 usecs
> [    0.010707] calling  init_bio+0x0/0xa7 @ 1
> [    0.010783] bio: create slab <bio-0> at 0
> [    0.010806] initcall init_bio+0x0/0xa7 returned 0 after 0 usecs
> [    0.010817] calling  fsnotify_init+0x0/0xa @ 1
> [    0.010828] initcall fsnotify_init+0x0/0xa returned 0 after 0 usecs
> [    0.010838] calling  fsnotify_notification_init+0x0/0xdc @ 1
> [    0.010851] initcall fsnotify_notification_init+0x0/0xdc returned 0 after 
> 0 usecs
> [    0.010861] calling  cryptomgr_init+0x0/0xa @ 1
> [    0.010871] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs
> [    0.010905] calling  blk_settings_init+0x0/0x19 @ 1
> [    0.010915] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs
> [    0.010925] calling  blk_ioc_init+0x0/0x22 @ 1
> [    0.010935] initcall blk_ioc_init+0x0/0x22 returned 0 after 0 usecs
> [    0.010945] calling  blk_softirq_init+0x0/0x50 @ 1
> [    0.010955] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs
> [    0.010965] calling  blk_iopoll_setup+0x0/0x50 @ 1
> [    0.010974] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs
> [    0.010983] calling  genhd_device_init+0x0/0x5d @ 1
> [    0.011061] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs
> [    0.011072] calling  blk_dev_integrity_init+0x0/0x22 @ 1
> [    0.011083] initcall blk_dev_integrity_init+0x0/0x22 returned 0 after 0 
> usecs
> [    0.011095] calling  pci_slot_init+0x0/0x37 @ 1
> [    0.011109] initcall pci_slot_init+0x0/0x37 returned 0 after 0 usecs
> [    0.011119] calling  fbmem_init+0x0/0x7c @ 1
> [    0.011153] initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs
> [    0.011165] calling  acpi_init+0x0/0x2cf @ 1
> [    0.011173] ACPI: Interpreter disabled.
> [    0.011181] initcall acpi_init+0x0/0x2cf returned -19 after 0 usecs
> [    0.011191] calling  dock_init+0x0/0x79 @ 1
> [    0.011200] initcall dock_init+0x0/0x79 returned 0 after 0 usecs
> [    0.011209] calling  acpi_pci_root_init+0x0/0x21 @ 1
> [    0.011218] initcall acpi_pci_root_init+0x0/0x21 returned 0 after 0 usecs
> [    0.011228] calling  acpi_pci_link_init+0x0/0x3b @ 1
> [    0.011238] initcall acpi_pci_link_init+0x0/0x3b returned 0 after 0 usecs
> [    0.011248] calling  pnp_init+0x0/0xa @ 1
> [    0.011276] initcall pnp_init+0x0/0xa returned 0 after 0 usecs
> [    0.011287] calling  __setup_shutdown_event+0x0/0x1b @ 1
> [    0.011297] initcall __setup_shutdown_event+0x0/0x1b returned 0 after 0 
> usecs
> [    0.011307] calling  xenbus_probe_backend_init+0x0/0x1f @ 1
> [    0.011338] initcall xenbus_probe_backend_init+0x0/0x1f returned 0 after 0 
> usecs
> [    0.011350] calling  xenbus_probe_frontend_init+0x0/0x1f @ 1
> [    0.011379] initcall xenbus_probe_frontend_init+0x0/0x1f returned 0 after 
> 0 usecs
> [    0.011390] calling  balloon_init+0x0/0x22f @ 1
> [    0.011398] xen_balloon: Initialising balloon driver with page order 0.
> [    0.011440] last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
> [    0.047958] initcall balloon_init+0x0/0x22f returned 0 after 35156 usecs
> [    0.048001] calling  misc_init+0x0/0x95 @ 1
> [    0.048083] initcall misc_init+0x0/0x95 returned 0 after 3906 usecs
> [    0.048096] calling  vga_arb_device_init+0x0/0x62 @ 1
> [    0.048173] vgaarb: loaded
> [    0.048182] initcall vga_arb_device_init+0x0/0x62 returned 0 after 0 usecs
> [    0.048194] calling  serio_init+0x0/0x6c @ 1
> [    0.048320] initcall serio_init+0x0/0x6c returned 0 after 0 usecs
> [    0.048332] calling  input_init+0x0/0x108 @ 1
> [    0.048367] initcall input_init+0x0/0x108 returned 0 after 0 usecs
> [    0.048378] calling  rtc_init+0x0/0x59 @ 1
> [    0.048400] initcall rtc_init+0x0/0x59 returned 0 after 0 usecs
> [    0.048412] calling  power_supply_class_init+0x0/0x2b @ 1
> [    0.048435] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 
> usecs
> [    0.048447] calling  hwmon_init+0x0/0xe7 @ 1
> [    0.048469] initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs
> [    0.048482] calling  pci_subsys_init+0x0/0xdc @ 1
> [    0.048491] PCI: Probing PCI hardware
> [    0.048500] PCI: Probing PCI hardware (bus 00)
> [    0.049132] pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f]
> [    0.049291] pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f]
> [    0.049473] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
> [    0.049778] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 
> ACPI/GPIO/TCO
> [    0.049793] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
> [    0.049864] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
> [    0.049887] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
> [    0.049909] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
> [    0.049931] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
> [    0.049953] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f]
> [    0.049976] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
> [    0.050128] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
> [    0.050373] pci 0000:01:1c.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
> [    0.050796] pci 0000:01:1e.0: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
> [    0.051132] pci 0000:00:02.0: bridge io port: [0x3000-0x4fff]
> [    0.051147] pci 0000:00:02.0: bridge 32bit mmio: [0xfc100000-0xfc8fffff]
> [    0.051318] pci 0000:02:01.0: reg 10 64bit mmio: [0xfc200000-0xfc2fffff]
> [    0.051342] pci 0000:02:01.0: reg 18 io port: [0x3000-0x30ff]
> [    0.051671] pci 0000:02:03.0: reg 10 64bit mmio: [0xfc300000-0xfc31ffff]
> [    0.051721] pci 0000:02:03.0: reg 20 io port: [0x3400-0x[    1.994324] 
> Initramfs unpacking failed: broken padding
> [    1.999351] Freeing initrd memory: 99856k freed
> [    2.137130] initcall populate_rootfs+0x0/0xec returned 0 after 2029723 
> usecs
> [    2.137155] calling  pci_iommu_init+0x0/0x32 @ 1
> [    2.137165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    2.137176] DMA: Placing 64MB software IO TLB between cd537000 - d1537000
> [    2.137186] DMA: software IO TLB at phys 0xd537000 - 0x11537000
> [    2.137196] initcall pci_iommu_init+0x0/0x32 returned 0 after 30 usecs
> [    2.137207] calling  i8259A_init_sysfs+0x0/0x19 @ 1
> [    2.137320] initcall i8259A_init_sysfs+0x0/0x19 returned 0 after 99 usecs
> [    2.137332] calling  sbf_init+0x0/0xd0 @ 1
> [    2.137341] initcall sbf_init+0x0/0xd0 returned 0 after 0 usecs
> [    2.137351] calling  i8237A_init_sysfs+0x0/0x19 @ 1
> [    2.137384] initcall i8237A_init_sysfs+0x0/0x19 returned 0 after 21 usecs
> [    2.137396] calling  add_rtc_cmos+0x0/0x77 @ 1
> [    2.137455] platform rtc_cmos: registered platform RTC device (no PNP 
> device found)
> [    2.137468] initcall add_rtc_cmos+0x0/0x77 returned 0 after 60 usecs
> [    2.137481] calling  cache_sysfs_init+0x0/0x51 @ 1
> [    2.137490] initcall cache_sysfs_init+0x0/0x51 returned 0 after 0 usecs
> [    2.137500] calling  mce_init_device+0x0/0xd1 @ 1
> [    2.137617] initcall mce_init_device+0x0/0xd1 returned 0 after 103 usecs
> [    2.137629] calling  threshold_init_device+0x0/0x63 @ 1
> [    2.137640] initcall threshold_init_device+0x0/0x63 returned 0 after 0 
> usecs
> [    2.137651] calling  thermal_throttle_init_device+0x0/0x79 @ 1
> [    2.137661] initcall thermal_throttle_init_device+0x0/0x79 returned 0 
> after 0 usecs
> [    2.137676] calling  ioapic_init_sysfs+0x0/0x7d @ 1
> [    2.137731] initcall ioapic_init_sysfs+0x0/0x7d returned 0 after 43 usecs
> [    2.137746] calling  init_vmi_clocksource+0x0/0xc2 @ 1
> [    2.137758] initcall init_vmi_clocksource+0x0/0xc2 returned 0 after 0 usecs
> [    2.137769] calling  add_pcspkr+0x0/0x20 @ 1
> [    2.137803] initcall add_pcspkr+0x0/0x20 returned 0 after 22 usecs
> [    2.137815] calling  init_sched_debug_procfs+0x0/0x23 @ 1
> [    2.137835] initcall init_sched_debug_procfs+0x0/0x23 returned 0 after 9 
> usecs
> [    2.137846] calling  proc_execdomains_init+0x0/0x1a @ 1
> [    2.137860] initcall proc_execdomains_init+0x0/0x1a returned 0 after 3 
> usecs
> [    2.137871] calling  ioresources_init+0x0/0x30 @ 1
> [    2.137887] initcall ioresources_init+0x0/0x30 returned 0 after 6 usecs
> [    2.137897] calling  uid_cache_init+0x0/0x76 @ 1
> [    2.137918] initcall uid_cache_init+0x0/0x76 returned 0 after 11 usecs
> [    2.137928] calling  init_posix_timers+0x0/0x149 @ 1
> [    2.137946] initcall init_posix_timers+0x0/0x149 returned 0 after 7 usecs
> [    2.137956] calling  init_posix_cpu_timers+0x0/0xc2 @ 1
> [    2.137973] initcall init_posix_cpu_timers+0x0/0xc2 returned 0 after 0 
> usecs
> [    2.137983] calling  nsproxy_cache_init+0x0/0x25 @ 1
> [    2.137995] initcall nsproxy_cache_init+0x0/0x25 returned 0 after 2 usecs
> [    2.138007] calling  create_proc_profile+0x0/0x186 @ 1
> [    2.138017] initcall create_proc_profile+0x0/0x186 returned 0 after 0 usecs
> [    2.138027] calling  timekeeping_init_device+0x0/0x19 @ 1
> [    2.138060] initcall timekeeping_init_device+0x0/0x19 returned 0 after 21 
> usecs
> [    2.138072] calling  init_clocksource_sysfs+0x0/0x3f @ 1
> [    2.138108] initcall init_clocksource_sysfs+0x0/0x3f returned 0 after 24 
> usecs
> [    2.138120] calling  init_timer_list_procfs+0x0/0x23 @ 1
> [    2.138135] initcall init_timer_list_procfs+0x0/0x23 returned 0 after 4 
> usecs
> [    2.138146] calling  init_tstats_procfs+0x0/0x23 @ 1
> [    2.138160] initcall init_tstats_procfs+0x0/0x23 returned 0 after 3 usecs
> [    2.138170] calling  futex_init+0x0/0x7d @ 1
> [    2.138205] initcall futex_init+0x0/0x7d returned 0 after 25 usecs
> [    2.138215] calling  proc_dma_init+0x0/0x1a @ 1
> [    2.138229] initcall proc_dma_init+0x0/0x1a returned 0 after 3 usecs
> [    2.138239] calling  proc_modules_init+0x0/0x1a @ 1
> [    2.138252] initcall proc_modules_init+0x0/0x1a returned 0 after 3 usecs
> [    2.138262] calling  kallsyms_init+0x0/0x1d @ 1
> [    2.138276] initcall kallsyms_init+0x0/0x1d returned 0 after 3 usecs
> [    2.138286] calling  snapshot_device_init+0x0/0xa @ 1
> [    2.138325] initcall snapshot_device_init+0x0/0xa returned 0 after 27 usecs
> [    2.138337] calling  crash_save_vmcoreinfo_init+0x0/0x344 @ 1
> [    2.138375] initcall crash_save_vmcoreinfo_init+0x0/0x344 returned 0 after 
> 26 usecs
> [    2.138387] calling  crash_notes_memory_init+0x0/0x2d @ 1
> [    2.138404] initcall crash_notes_memory_init+0x0/0x2d returned 0 after 6 
> usecs
> [    2.138416] calling  pid_namespaces_init+0x0/0x25 @ 1
> [    2.138428] initcall pid_namespaces_init+0x0/0x25 returned 0 after 1 usecs
> [    2.138438] calling  audit_init+0x0/0x10a @ 1
> [    2.138447] audit: initializing netlink socket (disabled)
> [    2.138480] type=2000 audit(1290283016.078:1): initialized
> [    2.138493] initcall audit_init+0x0/0x10a returned 0 after 43 usecs
> [    2.138503] calling  audit_tree_init+0x0/0x37 @ 1
> [    2.138515] initcall audit_tree_init+0x0/0x37 returned 0 after 2 usecs
> [    2.138525] calling  init_kprobes+0x0/0x12c @ 1
> [    2.142192] initcall init_kprobes+0x0/0x12c returned 0 after 3570 usecs
> [    2.142203] calling  hung_task_init+0x0/0x3c @ 1
> [    2.142318] initcall hung_task_init+0x0/0x3c returned 0 after 101 usecs
> [    2.142329] calling  utsname_sysctl_init+0x0/0xd @ 1
> [    2.142368] initcall utsname_sysctl_init+0x0/0xd returned 0 after 27 usecs
> [    2.142381] calling  init_tracepoints+0x0/0xa @ 1
> [    2.142393] initcall init_tracepoints+0x0/0xa returned 0 after 0 usecs
> [    2.142403] calling  init_events+0x0/0x53 @ 1
> [    2.142415] initcall init_events+0x0/0x53 returned 0 after 2 usecs
> [    2.142425] calling  init_sched_switch_trace+0x0/0xa @ 1
> [    2.142438] initcall init_sched_switch_trace+0x0/0xa returned 0 after 2 
> usecs
> [    2.142449] calling  init_blk_tracer+0x0/0x4c @ 1
> [    2.142459] initcall init_blk_tracer+0x0/0x4c returned 0 after 0 usecs
> [    2.142469] calling  perf_event_sysfs_init+0x0/0xf @ 1
> [    2.142487] initcall perf_event_sysfs_init+0x0/0xf returned 0 after 7 usecs
> [    2.142497] calling  init_per_zone_wmark_min+0x0/0x55 @ 1
> [    2.143105] initcall init_per_zone_wmark_min+0x0/0x55 returned 0 after 582 
> usecs
> [    2.143117] calling  kswapd_init+0x0/0x19 @ 1
> [    2.143188] initcall kswapd_init+0x0/0x19 returned 0 after 59 usecs
> [    2.143200] calling  setup_vmstat+0x0/0xa4 @ 1
> [    2.143229] initcall setup_vmstat+0x0/0xa4 returned 0 after 18 usecs
> [    2.143240] calling  mm_sysfs_init+0x0/0x1e @ 1
> [    2.143256] initcall mm_sysfs_init+0x0/0x1e returned 0 after 6 usecs
> [    2.143267] calling  proc_vmalloc_init+0x0/0x1d @ 1
> [    2.143280] initcall proc_vmalloc_init+0x0/0x1d returned 0 after 4 usecs
> [    2.143291] calling  init_emergency_pool+0x0/0x70 @ 1
> [    2.143303] initcall init_emergency_pool+0x0/0x70 returned 0 after 2 usecs
> [    2.143314] calling  procswaps_init+0x0/0x1a @ 1
> [    2.143328] initcall procswaps_init+0x0/0x1a returned 0 after 4 usecs
> [    2.143338] calling  hugetlb_init+0x0/0x2cc @ 1
> [    2.143349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [    2.143392] initcall hugetlb_init+0x0/0x2cc returned 0 after 42 usecs
> [    2.143402] calling  ksm_init+0x0/0x156 @ 1
> [    2.143483] initcall ksm_init+0x0/0x156 returned 0 after 68 usecs
> [    2.143494] calling  slab_proc_init+0x0/0x1d @ 1
> [    2.143509] initcall slab_proc_init+0x0/0x1d returned 0 after 4 usecs
> [    2.143519] calling  slab_sysfs_init+0x0/0xb0 @ 1
> [    2.145649] initcall slab_sysfs_init+0x0/0xb0 returned 0 after 2069 usecs
> [    2.145661] calling  fasync_init+0x0/0x22 @ 1
> [    2.145678] initcall fasync_init+0x0/0x22 returned 0 after 6 usecs
> [    2.145689] calling  proc_filesystems_init+0x0/0x1a @ 1
> [    2.145703] initcall proc_filesystems_init+0x0/0x1a returned 0 after 4 
> usecs
> [    2.145714] calling  dnotify_init+0x0/0x6b @ 1
> [    2.145735] initcall dnotify_init+0x0/0x6b returned 0 after 11 usecs
> [    2.145745] calling  inotify_setup+0x0/0xd @ 1
> [    2.145755] initcall inotify_setup+0x0/0xd returned 0 after 0 usecs
> [    2.145765] calling  inotify_user_setup+0x0/0x9d @ 1
> [    2.145809] initcall inotify_user_setup+0x0/0x9d returned 0 after 33 usecs
> [    2.145820] calling  aio_setup+0x0/0x5f @ 1
> [    2.145905] initcall aio_setup+0x0/0x5f returned 0 after 73 usecs
> [    2.145916] calling  proc_locks_init+0x0/0x1a @ 1
> [    2.145930] initcall proc_locks_init+0x0/0x1a returned 0 after 4 usecs
> [    2.145940] calling  dquot_init+0x0/0xd8 @ 1
> [    2.145948] VFS: Disk quotas dquot_6.5.2
> [    2.146028] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    2.146049] initcall dquot_init+0x0/0xd8 returned 0 after 96 usecs
> [    2.146059] calling  proc_cmdline_init+0x0/0x1a @ 1
> [    2.146073] initcall proc_cmdline_init+0x0/0x1a returned 0 after 4 usecs
> [    2.146083] calling  proc_cpuinfo_init+0x0/0x1a @ 1
> [    2.146097] initcall proc_cpuinfo_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146107] calling  proc_devices_init+0x0/0x1a @ 1
> [    2.146120] initcall proc_devices_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146130] calling  proc_interrupts_init+0x0/0x1a @ 1
> [    2.146143] initcall proc_interrupts_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146153] calling  proc_loadavg_init+0x0/0x1a @ 1
> [    2.146167] initcall proc_loadavg_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146177] calling  proc_meminfo_init+0x0/0x1a @ 1
> [    2.146190] initcall proc_meminfo_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146200] calling  proc_stat_init+0x0/0x1a @ 1
> [    2.146213] initcall proc_stat_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146223] calling  proc_uptime_init+0x0/0x1a @ 1
> [    2.146236] initcall proc_uptime_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146246] calling  proc_version_init+0x0/0x1a @ 1
> [    2.146259] initcall proc_version_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146269] calling  proc_softirqs_init+0x0/0x1a @ 1
> [    2.146282] initcall proc_softirqs_init+0x0/0x1a returned 0 after 3 usecs
> [    2.146292] calling  proc_kcore_init+0x0/0x9e @ 1
> [    2.146308] initcall proc_kcore_init+0x0/0x9e returned 0 after 5 usecs
> [    2.146318] calling  proc_kmsg_init+0x0/0x1d @ 1
> [    2.146331] initcall proc_kmsg_init+0x0/0x1d returned 0 after 3 usecs
> [    2.146341] calling  proc_page_init+0x0/0x36 @ 1
> [    2.146358] initcall proc_page_init+0x0/0x36 returned 0 after 6 usecs
> [    2.146368] calling  init_devpts_fs+0x0/0x39 @ 1
> [    2.146396] initcall init_devpts_fs+0x0/0x39 returned 0 after 17 usecs
> [    2.146406] calling  init_ramfs_fs+0x0/0xa @ 1
> [    2.146417] initcall init_ramfs_fs+0x0/0xa returned 0 after 1 usecs
> [    2.146427] calling  init_hugetlbfs_fs+0x0/0x7c @ 1
> [    2.146502] initcall init_hugetlbfs_fs+0x0/0x7c returned 0 after 62 usecs
> [    2.146513] calling  ipc_init+0x0/0x1c @ 1
> [    2.146527] msgmni has been set to 7605
> [    2.146544] initcall ipc_init+0x0/0x1c returned 0 after 22 usecs
> [    2.146554] calling  ipc_sysctl_init+0x0/0xd @ 1
> [    2.146593] initcall ipc_sysctl_init+0x0/0xd returned 0 after 27 usecs
> [    2.146603] calling  init_mqueue_fs+0x0/0x93 @ 1
> [    2.146686] initcall init_mqueue_fs+0x0/0x93 returned 0 after 70 usecs
> [    2.146697] calling  key_proc_init+0x0/0x4a @ 1
> [    2.146714] initcall key_proc_init+0x0/0x4a returned 0 after 7 usecs
> [    2.146725] calling  selinux_nf_ip_init+0x0/0x50 @ 1
> [    2.146735] initcall selinux_nf_ip_init+0x0/0x50 returned 0 after 0 usecs
> [    2.146745] calling  init_sel_fs+0x0/0x53 @ 1
> [    2.146755] initcall init_sel_fs+0x0/0x53 returned 0 after 0 usecs
> [    2.146764] calling  selnl_init+0x0/0x42 @ 1
> [    2.146789] initcall selnl_init+0x0/0x42 returned 0 after 13 usecs
> [    2.146800] calling  sel_netif_init+0x0/0x53 @ 1
> [    2.146810] initcall sel_netif_init+0x0/0x53 returned 0 after 0 usecs
> [    2.146820] calling  sel_netnode_init+0x0/0x5c @ 1
> [    2.146830] initcall sel_netnode_init+0x0/0x5c returned 0 after 0 usecs
> [    2.146840] calling  sel_netport_init+0x0/0x5c @ 1
> [    2.146849] initcall sel_netport_init+0x0/0x5c returned 0 after 0 usecs
> [    2.146859] calling  aurule_init+0x0/0x2c @ 1
> [    2.146869] initcall aurule_init+0x0/0x2c returned 0 after 1 usecs
> [    2.146879] calling  crypto_wq_init+0x0/0x25 @ 1
> [    2.146970] initcall crypto_wq_init+0x0/0x25 returned 0 after 55 usecs
> [    2.146982] calling  crypto_algapi_init+0x0/0x8 @ 1
> [    2.147002] initcall crypto_algapi_init+0x0/0x8 returned 0 after 9 usecs
> [    2.147013] calling  skcipher_module_init+0x0/0x25 @ 1
> [    2.147022] initcall skcipher_module_init+0x0/0x25 returned 0 after 0 usecs
> [    2.147032] calling  chainiv_module_init+0x0/0xa @ 1
> [    2.147044] initcall chainiv_module_init+0x0/0xa returned 0 after 2 usecs
> [    2.147054] calling  eseqiv_module_init+0x0/0xa @ 1
> [    2.147063] initcall eseqiv_module_init+0x0/0xa returned 0 after 0 usecs
> [    2.147073] calling  md5_mod_init+0x0/0xa @ 1
> [    2.147192] initcall md5_mod_init+0x0/0xa returned 0 after 106 usecs
> [    2.147203] calling  krng_mod_init+0x0/0xa @ 1
> [    2.147276] alg: No test for stdrng (krng)
> [    2.147298] initcall krng_mod_init+0x0/0xa returned 0 after 82 usecs
> [    2.147309] calling  proc_genhd_init+0x0/0x30 @ 1
> [    2.147327] initcall proc_genhd_init+0x0/0x30 returned 0 after 8 usecs
> [    2.147337] calling  bsg_init+0x0/0x107 @ 1
> [    2.147416] Block layer SCSI generic (bsg) driver version 0.4 loaded 
> (major 253)
> [    2.147430] initcall bsg_init+0x0/0x107 returned 0 after 80 usecs
> [    2.147440] calling  noop_init+0x0/0xd @ 1
> [    2.147448] io scheduler noop registered
> [    2.147457] initcall noop_init+0x0/0xd returned 0 after 8 usecs
> [    2.147467] calling  as_init+0x0/0xd @ 1
> [    2.147474] io scheduler anticipatory registered
> [    2.147483] initcall as_init+0x0/0xd returned 0 after 8 usecs
> [    2.147493] calling  deadline_init+0x0/0xd @ 1
> [    2.147501] io scheduler deadline registered
> [    2.147510] initcall deadline_init+0x0/0xd returned 0 after 7 usecs
> [    2.147520] calling  cfq_init+0x0/0x84 @ 1
> [    2.147590] io scheduler cfq registered (default)
> [    2.147601] initcall cfq_init+0x0/0x84 returned 0 after 69 usecs
> [    2.147611] calling  percpu_counter_startup+0x0/0x2c @ 1
> [    2.147622] initcall percpu_counter_startup+0x0/0x2c returned 0 after 1 
> usecs
> [    2.147638] calling  audit_classes_init+0x0/0x4b @ 1
> [    2.147655] initcall audit_classes_init+0x0/0x4b returned 0 after 7 usecs
> [    2.147666] calling  pci_proc_init+0x0/0x55 @ 1
> [    2.147795] initcall pci_proc_init+0x0/0x55 returned 0 after 116 usecs
> [    2.147806] calling  pcie_portdrv_init+0x0/0x3b @ 1
> [    2.147956] initcall pcie_portdrv_init+0x0/0x3b returned 0 after 136 usecs
> [    2.147974] calling  aer_service_init+0x0/0x22 @ 1
> [    2.148004] initcall aer_service_init+0x0/0x22 returned 0 after 16 usecs
> [    2.148011] calling  pcifront_init+0x0/0x42 @ 1
> [    2.148011] initcall pcifront_init+0x0/0x42 returned 0 after 15 usecs
> [    2.148011] calling  fb_console_init+0x0/0xf6 @ 1
> [    2.148011] initcall fb_console_init+0x0/0xf6 returned 0 after 21 usecs
> [    2.148011] calling  xenfb_init+0x0/0x4b @ 1
> [    2.148011] initcall xenfb_init+0x0/0x4b returned -19 after 0 usecs
> [    2.148011] calling  vesafb_init+0x0/0x1f3 @ 1
> [    2.148180] initcall vesafb_init+0x0/0x1f3 returned 0 after 53 usecs
> [    2.148192] calling  efifb_init+0x0/0x1af @ 1
> [    2.148218] initcall efifb_init+0x0/0x1af returned -19 after 16 usecs
> [    2.148228] calling  acpi_reserve_resources+0x0/0xc4 @ 1
> [    2.148239] initcall acpi_reserve_resources+0x0/0xc4 returned 0 after 0 
> usecs
> [    2.148250] calling  irqrouter_init_sysfs+0x0/0x2d @ 1
> [    2.148260] initcall irqrouter_init_sysfs+0x0/0x2d returned 0 after 0 usecs
> [    2.148294] calling  pnpbios_thread_init+0x0/0x47 @ 1
> [    2.148368] initcall pnpbios_thread_init+0x0/0x47 returned 0 after 60 usecs
> [    2.148380] calling  isapnp_init+0x0/0x61b @ 1
> [    2.148407] isapnp: Scanning for PnP cards...
> [    2.506477] isapnp: No Plug & Play device found
> [    2.506489] initcall isapnp_init+0x0/0x61b returned 0 after 349705 usecs
> [    2.506500] calling  xenbus_probe_initcall+0x0/0x33 @ 1
> [    2.506509] initcall xenbus_probe_initcall+0x0/0x33 returned 0 after 0 
> usecs
> [    2.506520] calling  gntdev_init+0x0/0x2e @ 1
> [    2.506586] initcall gntdev_init+0x0/0x2e returned 0 after 54 usecs
> [    2.506598] calling  pciback_init+0x0/0x10c @ 1
> [    2.506686] initcall pciback_init+0x0/0x10c returned 0 after 75 usecs
> [    2.506698] calling  blkif_init+0x0/0x12e @ 1
> [    2.513387] initcall blkif_init+0x0/0x12e returned 0 after 6516 usecs
> [    2.513403] calling  netback_init+0x0/0x32c @ 1
> [    2.515664] registering netback
> [    2.516010] initcall netback_init+0x0/0x32c returned 0 after 2527 usecs
> [    2.516018] calling  hypervisor_subsys_init+0x0/0x1d @ 1
> [    2.516018] initcall hypervisor_subsys_init+0x0/0x1d returned 0 after 0 
> usecs
> [    2.516018] calling  hyper_sysfs_init+0x0/0xc0 @ 1
> [    2.516018] initcall hyper_sysfs_init+0x0/0xc0 returned 0 after 11 usecs
> [    2.516018] calling  platform_pci_module_init+0x0/0x20 @ 1
> [    2.516018] initcall platform_pci_module_init+0x0/0x20 returned -19 after 
> 0 usecs
> [    2.516018] calling  rand_initialize+0x0/0x21 @ 1
> [    2.516018] initcall rand_initialize+0x0/0x21 returned 0 after 15 usecs
> [    2.516018] calling  tty_init+0x0/0xd4 @ 1
> [    2.518552] initcall tty_init+0x0/0xd4 returned 0 after 2352 usecs
> [    2.518564] calling  pty_init+0x0/0x295 @ 1
> [    2.518654] initcall pty_init+0x0/0x295 returned 0 after 78 usecs
> [    2.518666] calling  sysrq_init+0x0/0x1d @ 1
> [    2.518687] initcall sysrq_init+0x0/0x1d returned 0 after 10 usecs
> [    2.518697] calling  xen_hvc_init+0x0/0xc4 @ 1
> [    2.519044] initcall xen_hvc_init+0x0/0xc4 returned 0 after 328 usecs
> [    2.519055] calling  init+0x0/0xa @ 1
> [    2.519083] initcall init+0x0/0xa returned 0 after 17 usecs
> [    2.519093] calling  hpet_init+0x0/0x53 @ 1
> [    2.519194] initcall hpet_init+0x0/0x53 returned -19 after 88 usecs
> [    2.519205] calling  agp_init+0x0/0x1d @ 1
> [    2.519214] Linux agpgart interface v0.103
> [    2.519223] initcall agp_init+0x0/0x1d returned 0 after 8 usecs
> [    2.519233] calling  agp_ali_init+0x0/0x20 @ 1
> [    2.519269] initcall agp_ali_init+0x0/0x20 returned 0 after 25 usecs
> [    2.519280] calling  agp_ati_init+0x0/0x20 @ 1
> [    2.519316] initcall agp_ati_init+0x0/0x20 returned 0 after 24 usecs
> [    2.519327] calling  agp_amdk7_init+0x0/0x20 @ 1
> [    2.519356] initcall agp_amdk7_init+0x0/0x20 returned 0 after 18 usecs
> [    2.519367] calling  agp_amd64_init+0x0/0x93 @ 1
> [    2.519402] initcall agp_amd64_init+0x0/0x93 returned -19 after 23 usecs
> [    2.519413] calling  agp_efficeon_init+0x0/0x35 @ 1
> [    2.519443] initcall agp_efficeon_init+0x0/0x35 returned 0 after 19 usecs
> [    2.519455] calling  agp_intel_init+0x0/0x20 @ 1
> [    2.519491] initcall agp_intel_init+0x0/0x20 returned 0 after 24 usecs
> [    2.519502] calling  agp_nvidia_init+0x0/0x20 @ 1
> [    2.519532] initcall agp_nvidia_init+0x0/0x20 returned 0 after 19 usecs
> [    2.519544] calling  agp_sis_init+0x0/0x20 @ 1
> [    2.519575] initcall agp_sis_init+0x0/0x20 returned 0 after 20 usecs
> [    2.519586] calling  agp_serverworks_init+0x0/0x20 @ 1
> [    2.519617] initcall agp_serverworks_init+0x0/0x20 returned 0 after 19 
> usecs
> [    2.519629] calling  agp_via_init+0x0/0x20 @ 1
> [    2.519661] initcall agp_via_init+0x0/0x20 returned 0 after 21 usecs
> [    2.519673] calling  serial8250_init+0x0/0x10d @ 1
> [    2.519682] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    2.519978] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [    2.520206] initcall serial8250_init+0x0/0x10d returned 0 after 509 usecs
> [    2.520219] calling  serial8250_pnp_init+0x0/0xa @ 1
> [    2.520246] initcall serial8250_pnp_init+0x0/0xa returned 0 after 16 usecs
> [    2.520257] calling  serial8250_pci_init+0x0/0x11 @ 1
> [    2.520302] initcall serial8250_pci_init+0x0/0x11 returned 0 after 33 usecs
> [    2.520313] calling  isa_bus_init+0x0/0x2f @ 1
> [    2.520355] initcall isa_bus_init+0x0/0x2f returned 0 after 30 usecs
> [    2.520368] calling  topology_sysfs_init+0x0/0x40 @ 1
> [    2.520389] initcall topology_sysfs_init+0x0/0x40 returned 0 after 9 usecs
> [    2.520399] calling  net_olddevs_init+0x0/0x7e @ 1
> [    2.520415] initcall net_olddevs_init+0x0/0x7e r[    3.394429] e1000: 
> 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d2
> [    3.403780] calling  spi_transport_init+0x0/0x60 [scsi_transport_spi] @ 90
> [    3.404467] initcall spi_transport_init+0x0/0x60 [scsi_transport_spi] 
> returned 0 after 648 usecs
> [    3.412307] calling  piix_ide_init+0x0/0x9e [piix] @ 70
> [    3.412374] piix 0000:00:1f.1: IDE controller (0x8086:0x248b rev 0x02)
> [    3.412410] PIIX_IDE 0000:00:1f.1: found PCI INT A -> IRQ 7
> [    3.412559] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
> [    3.412578]     ide0: BM-DMA at 0x2060-0x2067
> [    3.412620]     ide1: BM-DMA at 0x2068-0x206f
> [    3.412646] Probing IDE interface ide0...
> [    3.421641] calling  ahd_linux_init+0x0/0x21d [aic79xx] @ 91
> [    3.421732] aic79xx 0000:03:02.0: found PCI INT A -> IRQ 5
> [    3.421809] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:01.0
> [    3.421823] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.0
> [    3.421837] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:02:03.1
> [    3.421856] aic79xx 0000:03:02.0: sharing IRQ 5 with 0000:03:02.1
> [    3.562359] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> [    3.562454] e1000 0000:02:03.1: found PCI INT B -> IRQ 5
> [    3.562534] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:01.0
> [    3.562549] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
> [    3.562568] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
> [    3.562583] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.1
> [    3.835938] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 
> 00:30:48:2d:3e:d3
> [    3.871055] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> [    3.871535] initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after 
> 740625 usecs
> [    4.228097] Probing IDE interface ide1...
> [    4.964251] hdc: CD-224E, ATAPI CD/DVD-ROM drive
> [    5.636182] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [    5.636816] hdc: UDMA/33 mode selected
> [    5.637477] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [    5.637509] ide1 at 0x170-0x177,0x376 on irq 15
> [    5.638208] initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 
> 2173712 usecs
> [    5.646801] ide_cd_mod: Unknown symbol register_cdrom
> [    5.646900] ide_cd_mod: Unknown symbol cdrom_ioctl
> [    5.647364] ide_cd_mod: Unknown symbol cdrom_mode_select
> [    5.647981] ide_cd_mod: Unknown symbol cdrom_media_changed
> [    5.648129] ide_cd_mod: Unknown symbol cdrom_get_last_written
> [    5.648219] ide_cd_mod: Unknown symbol cdrom_mode_sense
> [    5.648560] ide_cd_mod: Unknown symbol cdrom_get_media_event
> [    5.648830] ide_cd_mod: Unknown symbol cdrom_release
> [    5.649596] ide_cd_mod: Unknown symbol cdrom_open
> [    5.650077] ide_cd_mod: Unknown symbol unregister_cdrom
> [    5.650439] ide_cd_mod: Unknown symbol cdrom_number_of_slots
> [    5.650537] ide_cd_mod: Unknown symbol init_cdrom_command
> [   18.544044] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
> [   18.544046]         <Adaptec AIC7902 Ultra320 SCSI adapter>
> [   18.544048]         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 
> 101-133MHz, 512 SCBs
> [   18.544637] aic79xx 0000:03:02.1: found PCI INT B -> IRQ 5
> [   18.544719] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:01.0
> [   18.544739] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.0
> [   18.544754] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.1
> [   18.544768] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:03:02.0
> [   33.664039] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
> [   33.664042]         <Adaptec AIC7902 Ultra320 SCSI adapter>
> [   33.664044]         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 
> 101-133MHz, 512 SCBs
> [   33.664550] initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after 
> 29534066 usecs
> [   33.722012] calling  wait_scan_init+0x0/0x8 [scsi_wait_scan] @ 99
> [   33.722037] initcall wait_scan_init+0x0/0x8 [scsi_wait_scan] returned 0 
> after 2 usecs
> [   33.771825] calling  md_init+0x0/0xb8 [md_mod] @ 109
> [   33.771895] initcall md_init+0x0/0xb8 [md_mod] returned 0 after 44 usecs
> [   33.819731] dm_crypt: Unknown symbol dm_put_device
> [   33.820405] dm_crypt: Unknown symbol dm_unregister_target
> [   33.820708] dm_crypt: Unknown symbol dm_register_target
> [   33.820960] dm_crypt: Unknown symbol dm_table_get_mode
> [   33.821069] dm_crypt: Unknown symbol dm_get_device
> [   39.816057] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 
> 0x0 0x0 0x0 0x24 0x0
> [   39.817620] scsi 0:0:0:0: Command already completed
> [   49.816051] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 
> 0x0 0x0 0x0 0x0 0x0
> [   49.817599] scsi 0:0:0:0: Command already completed
> [   49.817638] scsi 0:0:0:0: Attempting to queue a TARGET RESET message:CDB: 
> 0x12 0x0 0x0 0x0 0x24 0x0
> [   49.817674] scsi0: Device reset code sleeping
> [   54.816059] scsi 1:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 
> 0x0 0x0 0x0 0x24 0x0
> [   54.817613] scsi 1:0:0:0: Command already completed
> [   54.817663] scsi0: Device reset timer expired (active 1)
> [   54.817672] scsi0: Device reset returning 0x2003
> [   54.818208] Recovery SCB completes
> [   64.816051] scsi 1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 
> 0x0 0x0 0x0 0x0 0x0
> [   64.817598] scsi 1:0:0:0: Command already completed
> [   64.817637] scsi 1:0:0:0: Attempting to queue a TARGET RESET message:CDB: 
> 0x12 0x0 0x0 0x0 0x24 0x0
> [   64.817673] scsi1: Device reset code sleeping
> [   69.816050] scsi1: Device reset timer expired (active 1)
> [   69.816066] scsi1: Device reset returning 0x2003
> [   69.816606] Recovery SCB completes
> [   74.820028] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 
> 0x0 0x0 0x0 0x0 0x0
> [   74.821577] scsi 0:0:0:0: Command already completed
> [   74.821613] scsi 0:0:0:0: Device offlined - not ready after error recovery
> [   89.820034] scsi 1:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 
> 0x0 0x0 0x0 0x0 0x0
> [   89.821581] scsi 1:0:0:0: Command already completed
> [   89.821617] scsi 1:0:0:0: Device offlined - not ready after error recovery
> [   95.816051] scsi 0:0:1:0: Attempting to queue an ABORT message:CDB: 0x12 
> 0x0 0x0 0x0 0x24 0x0
> [   95.817824] scsi 0:0:1:0: Command already completed




-- 
Best regards,
 Sander                            mailto:linux@xxxxxxxxxxxxxx


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.