|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: aic79xx failures with pvops dom0 2.6.32.25
Sander Eikelenboom <linux@xxxxxxxxxxxxxx> writes:
> Don't know if it has anything to do with it, but my eye fell on
> " 1.994324] Initramfs unpacking failed: broken padding"
> just after the pci-probing.
Unfortunately, that doesn't have anything to do with it, it seems. I was
getting that because my initrd was too large (98M because I had the
debug options on and the modules weren't stripped), and I'm not running
the version of grub that has triple indirect block support. I got that
error to go away by reducing the initrd through stripping the modules,
now I dont get that error, but I am still getting the ones referenced
before:
__ __ _ _ ___ ____ _
\ \/ /___ _ __ | || | / _ \ |___ \ _ __ ___/ | _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | __) |__| '__/ __| |__| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | / __/|__| | | (__| |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)_____| |_| \___|_| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.2-rc1-pre (root@xxxxxxxxxx) (gcc version 4.4.5 (Debian
4.4.5-6) ) Fri Nov 19 15:25:02 PST 2010
(XEN) Latest ChangeSet: Tue Nov 16 11:54:48 2010 +0000 21386:e9156d9d996b
(XEN) Bootloader: GRUB 1.98+20100804-8
(XEN) Command line: placeholder dom0_mem=512M dom0_max_vcpus=1 lapic=debug
apic_verbosity=debug apic=debug loglvl=all guest_loglvl=all console=com1
com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f7ef9000 (usable)
(XEN) 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
(XEN) 00000000f7f00000 - 00000000f7f80000 (usable)
(XEN) 00000000f7f80000 - 00000000f8000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff800000 - 00000000ffc00000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000208000000 (usable)
(XEN) System RAM: 8191MB (8387680kB)
(XEN) ACPI Error (tbxfroot-0220): A valid RSDP was not found [20070126]
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000208000000
(XEN) Xen heap: 8MB (8856kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6ca0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000
(XEN) Processor #0 15:2 APIC version 20
(XEN) Processor #6 15:2 APIC version 20
(XEN) Processor #1 15:2 APIC version 20
(XEN) Processor #7 15:2 APIC version 20
(XEN) I/O APIC #2 Version 32 at 0xFEC00000.
(XEN) I/O APIC #3 Version 32 at 0xFEC80000.
(XEN) I/O APIC #4 Version 32 at 0xFEC80400.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Processors: 4
(XEN) mapped APIC to fff7e000 (fee00000)
(XEN) mapped IOAPIC to fff7d000 (fec00000)
(XEN) mapped IOAPIC to fff7c000 (fec80000)
(XEN) mapped IOAPIC to fff7b000 (fec80400)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3199.125 MHz processor.
(XEN) CPU0: Intel Extended MCE MSRs (12) available
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) masked ExtINT on CPU#1
(XEN) CPU1: Intel Extended MCE MSRs (12) available
(XEN) masked ExtINT on CPU#2
(XEN) CPU2: Intel Extended MCE MSRs (12) available
(XEN) masked ExtINT on CPU#3
(XEN) CPU3: Intel Extended MCE MSRs (12) available
(XEN) Total of 4 processors activated.
(XEN) ExtINT not setup in hardware but reported by MP table
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23, 3-0,
3-1, 3-2, 3-3, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16,
3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-8, 4-9,
4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22,
4-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) number of MP IRQ sources: 23.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) number of IO-APIC #4 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #2......
(XEN) .... register #00: 02008000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 1
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 0 0 0 0 0 1 1 58
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 001 01 0 0 0 0 0 1 1 60
(XEN) 0d 001 01 0 0 0 0 0 1 1 68
(XEN) 0e 001 01 0 0 0 0 0 1 1 70
(XEN) 0f 001 01 0 0 0 0 0 1 1 78
(XEN) 10 001 01 1 1 0 1 0 1 1 88
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 001 01 1 1 0 1 0 1 1 90
(XEN) 13 001 01 1 1 0 1 0 1 1 98
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 001 01 1 1 0 1 0 1 1 A0
(XEN) 05 001 01 1 1 0 1 0 1 1 A8
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #4......
(XEN) .... register #00: 04000000
(XEN) ....... : physical APIC id: 04
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 04000000
(XEN) ....... : arbitration: 04
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 001 01 1 1 0 1 0 1 1 B0
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 001 01 1 1 0 1 0 1 1 B8
(XEN) 07 001 01 1 1 0 1 0 1 1 C0
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:12
(XEN) IRQ104 -> 0:13
(XEN) IRQ112 -> 0:14
(XEN) IRQ120 -> 0:15
(XEN) IRQ136 -> 0:16
(XEN) IRQ144 -> 0:18
(XEN) IRQ152 -> 0:19
(XEN) IRQ160 -> 1:4
(XEN) IRQ168 -> 1:5
(XEN) IRQ176 -> 2:0
(XEN) IRQ184 -> 2:6
(XEN) IRQ192 -> 2:7
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3199.1281 MHz.
(XEN) ..... host bus clock speed is 133.2968 MHz.
(XEN) ..... bus_scale = 0x0000887F
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
Ã(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x166c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000038000000->000000003c000000 (114688 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c166c000
(XEN) Init. ramdisk: c166c000->c2e09000
(XEN) Phys-Mach map: c2e09000->c2e89000
(XEN) Start info: c2e89000->c2e8947c
(XEN) Page tables: c2e8a000->c2ea7000
(XEN) Boot stack: c2ea7000->c2ea8000
(XEN) TOTAL: c0000000->c3000000
(XEN) ENTRY ADDRESS: c13e0000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM:
...........................................................................done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes
258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 152kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.25 (root@quelea) (gcc version 4.4.5 (Debian
4.4.5-6) ) #6 SMP Sat Nov 20 09:14:48 PST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
[ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000208000000 - 00000002dfef9000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 037ff000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[ 0.000000] 0000000000 - 002cffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
[ 0.000000] RAMDISK: 0166c000 - 02e09000
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 11054MB HIGHMEM available.
[ 0.000000] 719MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2cffe000
[ 0.000000] low ram: 0 - 2cffe000
[ 0.000000] node 0 low ram: 00000000 - 2cffe000
[ 0.000000] node 0 bootmap 00010000 - 00015a00
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 002cffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0002e8a000 - 0002ea7000] XEN PAGETABLES ==> [0002e8a000
- 0002ea7000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #4 [0001000000 - 00014fb8b4] TEXT DATA BSS ==> [0001000000
- 00014fb8b4]
[ 0.000000] #5 [000166c000 - 0002e09000] RAMDISK ==> [000166c000
- 0002e09000]
[ 0.000000] #6 [0002e09000 - 0002e8a000] XEN START INFO ==> [0002e09000
- 0002e8a000]
[ 0.000000] #7 [0208000000 - 02dfef9000] XEN EXTRA
[ 0.000000] #8 [00014fc000 - 0001509114] BRK ==> [00014fc000
- 0001509114]
[ 0.000000] #9 [0000100000 - 000024f000] PGTABLE ==> [0000100000
- 000024f000]
[ 0.000000] #10 [0000010000 - 0000016000] BOOTMAP ==> [0000010000
- 0000016000]
[ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002cffe
[ 0.000000] HighMem 0x0002cffe -> 0x002dfef9
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00208000 -> 0x002dfef9
[ 0.000000] On node 0 totalpages: 1015432
[ 0.000000] free_area_init_node: node 0, pgdat c13d5b00, node_mem_map
c2ea7200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1408 pages used for memmap
[ 0.000000] Normal zone: 125568 pages, LIFO batch:31
[ 0.000000] HighMem zone: 22110 pages used for memmap
[ 0.000000] HighMem zone: 862363 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID:
[ 0.000000] MPTABLE: Product ID: Kings Canyon
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
[ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
[ 0.000000] Processors: 1
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 00000000f7ef9000
[ 0.000000] PM: Registered nosave memory: 00000000f7ef9000 - 00000000f7f00000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:d7ef9000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c8ab9000 s37656 r0 d23784 u65536
[ 0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 991882
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/quelea0-root
ro console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c8b29000 - ccb29000
[ 0.000000] DMA: software IO TLB at phys 0x8b29000 - 0xcb29000
[ 0.000000] xen_swiotlb_fixup: buf=c8b29000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ccb89000 size=32768
[ 0.000000] Initializing HighMem for node 0 (0002cffe:002dfef9)
[ 0.000000] Memory: 331632k/12057572k available (2588k kernel code, 192012k
reserved, 1377k data, 396k init, 3537892k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
[ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.000000] vmalloc : 0xed7fe000 - 0xf4ffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xecffe000 ( 719 MB)
[ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB)
[ 0.000000] .data : 0xc12870a5 - 0xc13df898 (1377 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12870a5 (2588 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 3199.088 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6398.17 BogoMIPS (lpj=12796352)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: L3 cache: 1024K
[ 0.004000] CPU: Unsupported number of siblings 2
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] Performance Events: no PMU driver, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.010169] Freeing SMP alternatives: 13k freed
[ 0.010306] calling migration_init+0x0/0x43 @ 1
[ 0.010387] initcall migration_init+0x0/0x43 returned 0 after 0 usecs
[ 0.010399] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.010446] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 0 usecs
[ 0.010459] calling init_call_single_data+0x0/0x62 @ 1
[ 0.010469] initcall init_call_single_data+0x0/0x62 returned 0 after 0 usecs
[ 0.010481] calling spawn_softlockup_task+0x0/0x5b @ 1
[ 0.010534] initcall spawn_softlockup_task+0x0/0x5b returned 0 after 0 usecs
[ 0.010546] calling relay_init+0x0/0xd @ 1
[ 0.010554] initcall relay_init+0x0/0xd returned 0 after 0 usecs
[ 0.010564] calling tracer_alloc_buffers+0x0/0x12b @ 1
[ 0.010719] initcall tracer_alloc_buffers+0x0/0x12b returned 0 after 0 usecs
[ 0.010730] calling init_trace_printk+0x0/0xa @ 1
[ 0.010740] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs
[ 0.010774] Brought up 1 CPUs
[ 0.010791] CPU0 attaching NULL sched-domain.
[ 0.011021] devtmpfs: initialized
[ 0.011442] calling init_mmap_min_addr+0x0/0xd @ 1
[ 0.011453] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs
[ 0.011465] calling init_cpufreq_transition_notifier_list+0x0/0x14 @ 1
[ 0.011478] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned
0 after 0 usecs
[ 0.011490] calling net_ns_init+0x0/0xc9 @ 1
[ 0.011562] initcall net_ns_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.011576] calling e820_mark_nvs_memory+0x0/0x2d @ 1
[ 0.011590] initcall e820_mark_nvs_memory+0x0/0x2d returned 0 after 0 usecs
[ 0.011600] calling cpufreq_tsc+0x0/0x21 @ 1
[ 0.011611] initcall cpufreq_tsc+0x0/0x21 returned 0 after 0 usecs
[ 0.011622] calling pci_reboot_init+0x0/0xd @ 1
[ 0.011633] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs
[ 0.011643] calling reboot_init+0x0/0xd @ 1
[ 0.011660] initcall reboot_init+0x0/0xd returned 0 after 0 usecs
[ 0.011670] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.011695] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.011710] calling alloc_frozen_cpus+0x0/0x3 @ 1
[ 0.011720] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
[ 0.011730] calling sysctl_init+0x0/0x25 @ 1
[ 0.011924] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs
[ 0.011934] calling ksysfs_init+0x0/0x92 @ 1
[ 0.011954] initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs
[ 0.011964] calling async_init+0x0/0x4a @ 1
[ 0.012029] initcall async_init+0x0/0x4a returned 0 after 3906 usecs
[ 0.012041] calling init_jiffies_clocksource+0x0/0xa @ 1
[ 0.012053] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0
usecs
[ 0.012064] calling pm_init+0x0/0x4b @ 1
[ 0.012147] initcall pm_init+0x0/0x4b returned 0 after 0 usecs
[ 0.012158] calling pm_disk_init+0x0/0xf @ 1
[ 0.012170] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs
[ 0.012183] calling swsusp_header_init+0x0/0x22 @ 1
[ 0.012193] initcall swsusp_header_init+0x0/0x22 returned 0 after 0 usecs
[ 0.012204] calling init_zero_pfn+0x0/0x10 @ 1
[ 0.012213] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs
[ 0.012223] calling filelock_init+0x0/0x25 @ 1
[ 0.012233] initcall filelock_init+0x0/0x25 returned 0 after 0 usecs
[ 0.012243] calling init_script_binfmt+0x0/0xc @ 1
[ 0.012252] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs
[ 0.012262] calling init_elf_binfmt+0x0/0xc @ 1
[ 0.012271] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs
[ 0.012280] calling debugfs_init+0x0/0x46 @ 1
[ 0.012295] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs
[ 0.012306] calling securityfs_init+0x0/0x3d @ 1
[ 0.012319] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs
[ 0.012330] calling random32_init+0x0/0xa4 @ 1
[ 0.012340] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.012352] calling virtio_init+0x0/0x1b @ 1
[ 0.012379] initcall virtio_init+0x0/0x1b returned 0 after 0 usecs
[ 0.012392] calling __gnttab_init+0x0/0x1b @ 1
[ 0.012480] Grant table initialized
[ 0.012490] initcall __gnttab_init+0x0/0x1b returned 0 after 0 usecs
[ 0.012501] calling regulator_init+0x0/0x20 @ 1
[ 0.012509] regulator: core version 0.5
[ 0.012526] initcall regulator_init+0x0/0x20 returned 0 after 0 usecs
[ 0.012537] calling cpufreq_core_init+0x0/0x75 @ 1
[ 0.012550] initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 usecs
[ 0.012560] calling cpuidle_init+0x0/0x2e @ 1
[ 0.012574] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs
[ 0.012584] calling sock_init+0x0/0x4f @ 1
[ 0.012647] initcall sock_init+0x0/0x4f returned 0 after 0 usecs
[ 0.012659] calling net_inuse_init+0x0/0x1b @ 1
[ 0.012670] initcall net_inuse_init+0x0/0x1b returned 0 after 0 usecs
[ 0.012680] calling netpoll_init+0x0/0x2b @ 1
[ 0.012689] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs
[ 0.012699] calling netlink_proto_init+0x0/0xf8 @ 1
[ 0.012727] NET: Registered protocol family 16
[ 0.012752] initcall netlink_proto_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.012763] calling bdi_class_init+0x0/0x31 @ 1
[ 0.012801] initcall bdi_class_init+0x0/0x31 returned 0 after 0 usecs
[ 0.012813] calling kobject_uevent_init+0x0/0x49 @ 1
[ 0.012829] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs
[ 0.012840] calling pcibus_class_init+0x0/0xf @ 1
[ 0.012863] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs
[ 0.012875] calling pci_driver_init+0x0/0xa @ 1
[ 0.012906] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs
[ 0.012918] calling backlight_class_init+0x0/0x48 @ 1
[ 0.012940] initcall backlight_class_init+0x0/0x48 returned 0 after 0 usecs
[ 0.012952] calling xenbus_init+0x0/0x260 @ 1
[ 0.013086] initcall xenbus_init+0x0/0x260 returned 0 after 0 usecs
[ 0.013098] calling tty_class_init+0x0/0x2b @ 1
[ 0.013120] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
[ 0.013131] calling vtconsole_class_init+0x0/0x9b @ 1
[ 0.013184] initcall vtconsole_class_init+0x0/0x9b returned 0 after 0 usecs
[ 0.013195] calling spi_init+0x0/0x8c @ 1
[ 0.013233] initcall spi_init+0x0/0x8c returned 0 after 0 usecs
[ 0.013245] calling lguest_devices_init+0x0/0x160 @ 1
[ 0.013255] initcall lguest_devices_init+0x0/0x160 returned 0 after 0 usecs
[ 0.013265] calling amd_postcore_init+0x0/0x62 @ 1
[ 0.013275] initcall amd_postcore_init+0x0/0x62 returned 0 after 0 usecs
[ 0.013286] calling arch_kdebugfs_init+0x0/0x1a @ 1
[ 0.013300] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs
[ 0.013312] calling init_pit_clocksource+0x0/0xa3 @ 1
[ 0.013323] initcall init_pit_clocksource+0x0/0xa3 returned 0 after 0 usecs
[ 0.013333] calling mtrr_if_init+0x0/0x40 @ 1
[ 0.013346] initcall mtrr_if_init+0x0/0x40 returned 0 after 0 usecs
[ 0.013356] calling ffh_cstate_init+0x0/0x23 @ 1
[ 0.013367] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
[ 0.013378] calling acpi_pci_init+0x0/0x4d @ 1
[ 0.013387] initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs
[ 0.013398] calling xen_pcpu_init+0x0/0x8e @ 1
[ 0.013444] sync cpu 0 get result 1 max_id 3
[ 0.013469] sync cpu 1 get result 1 max_id 3
[ 0.013493] sync cpu 2 get result 1 max_id 3
[ 0.013542] sync cpu 3 get result 1 max_id 3
[ 0.013571] initcall xen_pcpu_init+0x0/0x8e returned 1529 after 0 usecs
[ 0.013582] initcall xen_pcpu_init+0x0/0x8e returned with error code 1529
[ 0.013592] calling register_xen_pci_notifier+0x0/0x1b @ 1
[ 0.013602] initcall register_xen_pci_notifier+0x0/0x1b returned 0 after 0
usecs
[ 0.013612] calling setup_vcpu_hotplug_event+0x0/0x1b @ 1
[ 0.013622] initcall setup_vcpu_hotplug_event+0x0/0x1b returned 0 after 0
usecs
[ 0.013632] calling dmi_id_init+0x0/0x288 @ 1
[ 0.013708] initcall dmi_id_init+0x0/0x288 returned 0 after 0 usecs
[ 0.013720] calling dma_bus_init+0x0/0x2d @ 1
[ 0.013742] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs
[ 0.013753] calling dma_channel_table_init+0x0/0xc9 @ 1
[ 0.013771] initcall dma_channel_table_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.013781] calling pci_arch_init+0x0/0x56 @ 1
[ 0.015478] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
[ 0.015488] PCI: Using configuration type 1 for base access
[ 0.015509] initcall pci_arch_init+0x0/0x56 returned 0 after 0 usecs
[ 0.015520] calling topology_init+0x0/0x32 @ 1
[ 0.015543] initcall topology_init+0x0/0x32 returned 0 after 0 usecs
[ 0.015555] calling mtrr_init_finialize+0x0/0x31 @ 1
[ 0.015566] initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs
[ 0.015576] calling param_sysfs_init+0x0/0x1ea @ 1
[ 0.016370] initcall param_sysfs_init+0x0/0x1ea returned 0 after 3906 usecs
[ 0.016383] calling pm_sysrq_init+0x0/0x12 @ 1
[ 0.016395] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs
[ 0.016405] calling audit_watch_init+0x0/0x23 @ 1
[ 0.016416] initcall audit_watch_init+0x0/0x23 returned 0 after 0 usecs
[ 0.016426] calling init_slow_work+0x0/0x2b @ 1
[ 0.016435] initcall init_slow_work+0x0/0x2b returned 0 after 0 usecs
[ 0.016445] calling default_bdi_init+0x0/0x92 @ 1
[ 0.016584] initcall default_bdi_init+0x0/0x92 returned 0 after 0 usecs
[ 0.016596] calling init_bio+0x0/0xa7 @ 1
[ 0.016671] bio: create slab <bio-0> at 0
[ 0.016695] initcall init_bio+0x0/0xa7 returned 0 after 0 usecs
[ 0.016706] calling fsnotify_init+0x0/0xa @ 1
[ 0.016717] initcall fsnotify_init+0x0/0xa returned 0 after 0 usecs
[ 0.016727] calling fsnotify_notification_init+0x0/0xdc @ 1
[ 0.016740] initcall fsnotify_notification_init+0x0/0xdc returned 0 after 0
usecs
[ 0.016751] calling cryptomgr_init+0x0/0xa @ 1
[ 0.016760] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs
[ 0.016770] calling blk_settings_init+0x0/0x19 @ 1
[ 0.016779] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs
[ 0.016789] calling blk_ioc_init+0x0/0x22 @ 1
[ 0.016798] initcall blk_ioc_init+0x0/0x22 returned 0 after 0 usecs
[ 0.016808] calling blk_softirq_init+0x0/0x50 @ 1
[ 0.016818] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs
[ 0.016827] calling blk_iopoll_setup+0x0/0x50 @ 1
[ 0.016836] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs
[ 0.016846] calling genhd_device_init+0x0/0x5d @ 1
[ 0.016923] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs
[ 0.016935] calling blk_dev_integrity_init+0x0/0x22 @ 1
[ 0.016946] initcall blk_dev_integrity_init+0x0/0x22 returned 0 after 0 usecs
[ 0.016959] calling pci_slot_init+0x0/0x37 @ 1
[ 0.016972] initcall pci_slot_init+0x0/0x37 returned 0 after 0 usecs
[ 0.016983] calling fbmem_init+0x0/0x7c @ 1
[ 0.017017] initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs
[ 0.017028] calling acpi_init+0x0/0x2cf @ 1
[ 0.017036] ACPI: Interpreter disabled.
[ 0.017045] initcall acpi_init+0x0/0x2cf returned -19 after 0 usecs
[ 0.017056] calling dock_init+0x0/0x79 @ 1
[ 0.017064] initcall dock_init+0x0/0x79 returned 0 after 0 usecs
[ 0.017074] calling acpi_pci_root_init+0x0/0x21 @ 1
[ 0.017083] initcall acpi_pci_root_init+0x0/0x21 returned 0 after 0 usecs
[ 0.017093] calling acpi_pci_link_init+0x0/0x3b @ 1
[ 0.017103] initcall acpi_pci_link_init+0x0/0x3b returned 0 after 0 usecs
[ 0.017112] calling pnp_init+0x0/0xa @ 1
[ 0.017141] initcall pnp_init+0x0/0xa returned 0 after 0 usecs
[ 0.017152] calling __setup_shutdown_event+0x0/0x1b @ 1
[ 0.017163] initcall __setup_shutdown_event+0x0/0x1b returned 0 after 0 usecs
[ 0.017173] calling xenbus_probe_backend_init+0x0/0x1f @ 1
[ 0.017203] initcall xenbus_probe_backend_init+0x0/0x1f returned 0 after 0
usecs
[ 0.017215] calling xenbus_probe_frontend_init+0x0/0x1f @ 1
[ 0.017245] initcall xenbus_probe_frontend_init+0x0/0x1f returned 0 after 0
usecs
[ 0.017256] calling balloon_init+0x0/0x22f @ 1
[ 0.017264] xen_balloon: Initialising balloon driver with page order 0.
[ 0.017306] last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
[ 0.054297] initcall balloon_init+0x0/0x22f returned 0 after 35156 usecs
[ 0.054317] calling misc_init+0x0/0x95 @ 1
[ 0.054415] initcall misc_init+0x0/0x95 returned 0 after 0 usecs
[ 0.054426] calling vga_arb_device_init+0x0/0x62 @ 1
[ 0.054504] vgaarb: loaded
[ 0.054513] initcall vga_arb_device_init+0x0/0x62 returned 0 after 0 usecs
[ 0.054524] calling serio_init+0x0/0x6c @ 1
[ 0.054656] initcall serio_init+0x0/0x6c returned 0 after 0 usecs
[ 0.054667] calling input_init+0x0/0x108 @ 1
[ 0.054702] initcall input_init+0x0/0x108 returned 0 after 0 usecs
[ 0.054739] calling rtc_init+0x0/0x59 @ 1
[ 0.054762] initcall rtc_init+0x0/0x59 returned 0 after 0 usecs
[ 0.054773] calling power_supply_class_init+0x0/0x2b @ 1
[ 0.054797] initcall power_supply_class_init+0x0/0x2b returned 0 after 0
usecs
[ 0.054809] calling hwmon_init+0x0/0xe7 @ 1
[ 0.054831] initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.054844] calling pci_subsys_init+0x0/0xdc @ 1
[ 0.054853] PCI: Probing PCI hardware
[ 0.054862] PCI: Probing PCI hardware (bus 00)
[ 0.055498] pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f]
[ 0.055673] pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f]
[ 0.055831] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.056001] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
ACPI/GPIO/TCO
[ 0.056001] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.056001] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.056001] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.056001] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.056001] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.056001] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f]
[ 0.056001] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.056001] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.056001] pci 0000:01:1c.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
[ 0.056001] pci 0000:01:1e.0: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
[ 0.056001] pci 0000:00:02.0: bridge io port: [0x3000-0x4fff]
[ 0.056001] pci 0000:00:02.0: bridge 32bit mmio: [0xfc100000-0xfc8fffff]
[ 0.056179] pci 0000:02:01.0: reg 10 64bit mmio: [0xfc200000-0xfc2fffff]
[ 0.056204] pci 0000:02:01.0: reg 18 io port: [0x3000-0x30ff]
[ 0.056529] pci 0000:02:03.0: reg 10 64bit mmio: [0xfc300000-0xfc31ffff]
[ 0.056579] pci 0000:02:03.0: reg 20 io port: [0x3400-0x343f]
[ 0.056681] pci 0000:[ 0.800412] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.800495] initcall i8042_init+0x0/0x343 returned 0 after 245818 usecs
[ 0.800507] calling mousedev_init+0x0/0x72 @ 1
[ 0.800605] mice: PS/2 mouse device common for all mice
[ 0.800617] initcall mousedev_init+0x0/0x72 returned 0 after 97 usecs
[ 0.800628] calling atkbd_init+0x0/0x1b @ 1
[ 0.800668] initcall atkbd_init+0x0/0x1b returned 0 after 29 usecs
[ 0.800679] calling xenkbd_init+0x0/0x4b @ 1
[ 0.800689] initcall xenkbd_init+0x0/0x4b returned -19 after 0 usecs
[ 0.800699] calling cmos_init+0x0/0x5a @ 1
[ 0.800858] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.800914] rtc0: alarms up to one day, 114 bytes nvram
[ 0.800938] initcall cmos_init+0x0/0x5a returned 0 after 223 usecs
[ 0.800950] calling init_ladder+0x0/0xa @ 1
[ 0.800961] cpuidle: using governor ladder
[ 0.800970] initcall init_ladder+0x0/0xa returned 0 after 10 usecs
[ 0.800980] calling init_menu+0x0/0xa @ 1
[ 0.800988] cpuidle: using governor menu
[ 0.800996] initcall init_menu+0x0/0xa returned 0 after 7 usecs
[ 0.801006] calling ledtrig_ide_init+0x0/0x12 @ 1
[ 0.801018] initcall ledtrig_ide_init+0x0/0x12 returned 0 after 1 usecs
[ 0.801028] calling ibft_init+0x0/0x4e9 @ 1
[ 0.801040] No iBFT detected.
[ 0.801049] initcall ibft_init+0x0/0x4e9 returned 0 after 11 usecs
[ 0.801059] calling staging_init+0x0/0x3 @ 1
[ 0.801068] initcall staging_init+0x0/0x3 returned 0 after 0 usecs
[ 0.801079] calling flow_cache_init+0x0/0x14d @ 1
[ 0.801123] initcall flow_cache_init+0x0/0x14d returned 0 after 32 usecs
[ 0.801134] calling llc_init+0x0/0x17 @ 1
[ 0.801144] initcall llc_init+0x0/0x17 returned 0 after 1 usecs
[ 0.801154] calling snap_init+0x0/0x2d @ 1
[ 0.801164] initcall snap_init+0x0/0x2d returned 0 after 1 usecs
[ 0.801174] calling rif_init+0x0/0x68 @ 1
[ 0.801208] initcall rif_init+0x0/0x68 returned 0 after 23 usecs
[ 0.801219] calling blackhole_module_init+0x0/0xa @ 1
[ 0.801230] initcall blackhole_module_init+0x0/0xa returned 0 after 1 usecs
[ 0.801241] calling init_cgroup_cls+0x0/0xa @ 1
[ 0.801251] initcall init_cgroup_cls+0x0/0xa returned 0 after 0 usecs
[ 0.801261] calling sysctl_ipv4_init+0x0/0x3b @ 1
[ 0.801547] initcall sysctl_ipv4_init+0x0/0x3b returned 0 after 268 usecs
[ 0.801559] calling init_syncookies+0x0/0x12 @ 1
[ 0.801631] initcall init_syncookies+0x0/0x12 returned 0 after 60 usecs
[ 0.801643] calling ipv4_netfilter_init+0x0/0xa @ 1
[ 0.801653] initcall ipv4_netfilter_init+0x0/0xa returned 0 after 1 usecs
[ 0.801664] calling cubictcp_register+0x0/0x6c @ 1
[ 0.801673] TCP cubic registered
[ 0.801682] initcall cubictcp_register+0x0/0x6c returned 0 after 8 usecs
[ 0.801692] calling inet6_init+0x0/0x28d @ 1
[ 0.801890] NET: Registered protocol family 10
[ 0.802470] lo: Disabled Privacy Extensions
[ 0.802833] initcall inet6_init+0x0/0x28d returned 0 after 1103 usecs
[ 0.802845] calling mip6_init+0x0/0xa2 @ 1
[ 0.802852] Mobile IPv6
[ 0.802861] initcall mip6_init+0x0/0xa2 returned 0 after 7 usecs
[ 0.802870] calling packet_init+0x0/0x35 @ 1
[ 0.802878] NET: Registered protocol family 17
[ 0.802893] initcall packet_init+0x0/0x35 returned 0 after 12 usecs
[ 0.802903] calling dcbnl_init+0x0/0x2b @ 1
[ 0.802913] initcall dcbnl_init+0x0/0x2b returned 0 after 0 usecs
[ 0.802923] calling mce_debugfs_init+0x0/0x31 @ 1
[ 0.802946] initcall mce_debugfs_init+0x0/0x31 returned 0 after 11 usecs
[ 0.802957] calling severities_debugfs_init+0x0/0x31 @ 1
[ 0.802970] initcall severities_debugfs_init+0x0/0x31 returned 0 after 3
usecs
[ 0.802981] calling hpet_insert_resource+0x0/0x1a @ 1
[ 0.802992] initcall hpet_insert_resource+0x0/0x1a returned 1 after 0 usecs
[ 0.803003] initcall hpet_insert_resource+0x0/0x1a returned with error code
1
[ 0.803015] calling update_mp_table+0x0/0x564 @ 1
[ 0.803025] initcall update_mp_table+0x0/0x564 returned 0 after 1 usecs
[ 0.803036] calling lapic_insert_resource+0x0/0x41 @ 1
[ 0.803047] initcall lapic_insert_resource+0x0/0x41 returned -1 after 0 usecs
[ 0.803058] initcall lapic_insert_resource+0x0/0x41 returned with error code
-1
[ 0.803069] calling print_ipi_mode+0x0/0x24 @ 1
[ 0.803077] Using IPI No-Shortcut mode
[ 0.803086] initcall print_ipi_mode+0x0/0x24 returned 0 after 7 usecs
[ 0.803096] calling init_lapic_nmi_sysfs+0x0/0x2d @ 1
[ 0.803106] initcall init_lapic_nmi_sysfs+0x0/0x2d returned 0 after 0 usecs
[ 0.803116] calling io_apic_bug_finalize+0x0/0x16 @ 1
[ 0.803126] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
[ 0.803137] calling check_early_ioremap_leak+0x0/0x58 @ 1
[ 0.803147] initcall check_early_ioremap_leak+0x0/0x58 returned 0 after 0
usecs
[ 0.803158] calling pat_memtype_list_init+0x0/0x21 @ 1
[ 0.803172] initcall pat_memtype_list_init+0x0/0x21 returned 0 after 3 usecs
[ 0.803183] calling sched_init_debug+0x0/0x1d @ 1
[ 0.803195] initcall sched_init_debug+0x0/0x1d returned 0 after 2 usecs
[ 0.803208] calling init_oops_id+0x0/0x36 @ 1
[ 0.803226] initcall init_oops_id+0x0/0x36 returned 0 after 7 usecs
[ 0.803236] calling disable_boot_consoles+0x0/0x37 @ 1
[ 0.803246] initcall disable_boot_consoles+0x0/0x37 returned 0 after 0 usecs
[ 0.803259] calling pm_qos_power_init+0x0/0xa8 @ 1
[ 0.803398] initcall pm_qos_power_init+0x0/0xa8 returned 0 after 124 usecs
[ 0.803412] calling software_resume+0x0/0x1d1 @ 1
[ 0.803421] PM: Resume from disk failed.
[ 0.803430] initcall software_resume+0x0/0x1d1 returned -2 after 7 usecs
[ 0.803441] initcall software_resume+0x0/0x1d1 returned with error code -2
[ 0.803452] calling debugfs_kprobe_init+0x0/0x74 @ 1
[ 0.803470] initcall debugfs_kprobe_init+0x0/0x74 returned 0 after 7 usecs
[ 0.803481] calling taskstats_init+0x0/0x76 @ 1
[ 0.803499] registered taskstats version 1
[ 0.803509] initcall taskstats_init+0x0/0x76 returned 0 after 16 usecs
[ 0.803519] calling clear_boot_tracer+0x0/0x23 @ 1
[ 0.803529] initcall clear_boot_tracer+0x0/0x23 returned 0 after 0 usecs
[ 0.803540] calling max_swapfiles_check+0x0/0x3 @ 1
[ 0.803550] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
[ 0.803561] calling random32_reseed+0x0/0x84 @ 1
[ 0.803582] initcall random32_reseed+0x0/0x84 returned 0 after 11 usecs
[ 0.803593] calling pci_resource_alignment_sysfs_init+0x0/0xf @ 1
[ 0.803631] initcall pci_resource_alignment_sysfs_init+0x0/0xf returned 0
after 2 usecs
[ 0.803644] calling pci_sysfs_init+0x0/0x40 @ 1
[ 0.804357] initcall pci_sysfs_init+0x0/0x40 returned 0 after 685 usecs
[ 0.804369] calling boot_wait_for_devices+0x0/0x2b @ 1
[ 0.804381] initcall boot_wait_for_devices+0x0/0x2b returned 0 after 1 usecs
[ 0.804392] calling regulator_init_complete+0x0/0xe8 @ 1
[ 0.804402] initcall regulator_init_complete+0x0/0xe8 returned 0 after 0
usecs
[ 0.804412] calling seqgen_init+0x0/0xa @ 1
[ 0.804447] initcall seqgen_init+0x0/0xa returned 0 after 24 usecs
[ 0.804457] calling rtc_hctosys+0x0/0x11a @ 1
[ 0.804519] rtc_cmos rtc_cmos: setting system clock to 2010-11-21 15:53:00
UTC (1290354780)
[ 0.804532] initcall rtc_hctosys+0x0/0x11a returned 0 after 63 usecs
[ 0.804543] calling memmap_init+0x0/0x7e @ 1
[ 0.804616] initcall memmap_init+0x0/0x7e returned 0 after 60 usecs
[ 0.804627] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1
[ 0.804640] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 1
after 0 usecs
[ 0.804652] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned with
error code 1
[ 0.804663] calling init_net_drop_monitor+0x0/0x107 @ 1
[ 0.804672] Initalizing network drop monitor service
[ 0.804693] initcall init_net_drop_monitor+0x0/0x107 returned 0 after 18
usecs
[ 0.804704] calling tcp_congestion_default+0x0/0xa @ 1
[ 0.804715] initcall tcp_congestion_default+0x0/0xa returned 0 after 1 usecs
[ 0.804726] calling initialize_hashrnd+0x0/0x12 @ 1
[ 0.804743] initcall initialize_hashrnd+0x0/0x12 returned 0 after 6 usecs
[ 0.804763] async_waiting @ 1
[ 0.804771] async_continuing @ 1 after 0 usec
[ 0.804812] Freeing unused kernel m[ 1.561876] calling
uhci_hcd_init+0x0/0xa1 [uhci_hcd] @ 70
[ 1.561889] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.562649] calling mv_init+0x0/0x39 [sata_mv] @ 87
[ 1.590347] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.590402] sata_mv 0000:02:01.0: version 1.28
[ 1.590542] sata_mv 0000:02:01.0: found PCI INT A -> IRQ 5
[ 1.590628] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.0
[ 1.590643] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.1
[ 1.590657] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.0
[ 1.590672] sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.1
[ 1.591423] sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via
INTx
[ 1.595575] scsi1 : sata_mv
[ 1.596070] scsi2 : sata_mv
[ 1.596359] scsi3 : sata_mv
[ 1.596625] scsi4 : sata_mv
[ 1.596919] scsi5 : sata_mv
[ 1.597182] scsi6 : sata_mv
[ 1.597451] scsi7 : sata_mv
[ 1.597719] scsi8 : sata_mv
[ 1.597795] ata1: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000
irq 5
[ 1.597808] ata2: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000
irq 5
[ 1.597820] ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000
irq 5
[ 1.597832] ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000
irq 5
[ 1.597843] ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000
irq 5
[ 1.597854] ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000
irq 5
[ 1.597865] ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000
irq 5
[ 1.597876] ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000
irq 5
[ 1.597987] initcall mv_init+0x0/0x39 [sata_mv] returned 0 after 34488 usecs
[ 1.598475] e1000 0000:02:03.1: found PCI INT B -> IRQ 5
[ 1.598558] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:01.0
[ 1.598573] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
[ 1.598592] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
[ 1.598608] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.1
[ 1.871939] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit)
00:30:48:2d:3e:d3
[ 1.907197] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.907695] initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after
753580 usecs
[ 2.136057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.152094] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
[ 2.152106] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.176098] ata1.00: configured for UDMA/133
[ 2.176329] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O
PQ: 0 ANSI: 5
[ 2.264094] Probing IDE interface ide1...
[ 2.652057] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.668072] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 2.668087] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.692099] ata2.00: configured for UDMA/133
[ 2.692303] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O
PQ: 0 ANSI: 5
[ 3.000258] hdc: CD-224E, ATAPI CD/DVD-ROM drive
[ 3.012053] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.332048] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.652051] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.672203] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.672837] hdc: UDMA/33 mode selected
[ 3.673498] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.673529] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.673827] PCI: setting IRQ 11 as level-triggered
[ 3.673840] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 3.673950] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:04:01.0
[ 3.673975] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.673989] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.674037] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 3.674090] uhci_hcd 0000:00:1d.0: request interrupt 11 failed
[ 3.674102] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
[ 3.674145] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -38
[ 3.674161] uhci_hcd: probe of 0000:00:1d.0 failed with error -38
[ 3.674200] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.674214] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.674243] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 1
[ 3.674293] uhci_hcd 0000:00:1d.1: request interrupt 10 failed
[ 3.674304] uhci_hcd 0000:00:1d.1: USB bus 1 deregistered
[ 3.674338] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38
[ 3.674352] uhci_hcd: probe of 0000:00:1d.1 failed with error -38
[ 3.674390] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.674403] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.674432] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 1
[ 3.674497] uhci_hcd 0000:00:1d.2: irq 7, io base 0x00002040
[ 3.674629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.674640] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.674651] usb usb1: Product: UHCI Host Controller
[ 3.674659] usb usb1: Manufacturer: Linux 2.6.32.25 uhci_hcd
[ 3.674668] usb usb1: SerialNumber: 0000:00:1d.2
[ 3.674960] usb usb1: configuration #1 chosen from 1 choice
[ 3.675398] hub 1-0:1.0: USB hub found
[ 3.675434] hub 1-0:1.0: 2 ports detected
[ 3.676040] initcall uhci_hcd_init+0x0/0xa1 [uhci_hcd] returned 0 after
2064562 usecs
[ 3.676462] initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 2199568
usecs
[ 3.972054] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.292050] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.612051] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.623435] calling piix_init+0x0/0x23 [ata_piix] @ 69
[ 4.623509] initcall piix_init+0x0/0x23 [ata_piix] returned 0 after 51 usecs
[ 4.640174] calling ata_generic_init+0x0/0x14 [ata_generic] @ 69
[ 4.640632] initcall ata_generic_init+0x0/0x14 [ata_generic] returned 0
after 424 usecs
[ 4.660334] calling cdrom_init+0x0/0x57 [cdrom] @ 120
[ 4.660391] initcall cdrom_init+0x0/0x57 [cdrom] returned 0 after 34 usecs
[ 4.665311] calling init_sd+0x0/0x127 [sd_mod] @ 117
[ 4.666141] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 4.666324] sd 1:0:0:0: [sda] Write Protect is off
[ 4.666334] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.666428] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.666847] sda:
[ 4.667197] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 4.667402] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.667412] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.667505] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.667933] sdb:initcall init_sd+0x0/0x127 [sd_mod] returned 0 after 3042
usecs
[ 4.668952] calling ide_cdrom_init+0x0/0x15 [ide_cd_mod] @ 120
[ 4.668963] ide-cd driver 5.00
[ 4.669837] ide-cd: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[ 4.669859] Uniform CD-ROM driver Revision: 3.20
[ 4.681520] initcall ide_cdrom_init+0x0/0x15 [ide_cd_mod] returned 0 after
12258 usecs
[ 16.572048] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 16.572051] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 16.572053] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
101-133MHz, 512 SCBs
[ 16.572598] aic79xx 0000:03:02.1: found PCI INT B -> IRQ 5
[ 16.572681] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:01.0
[ 16.572697] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.0
[ 16.572718] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.1
[ 16.572733] aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:03:02.0
[ 31.692043] scsi9 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 31.692046] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 31.692048] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X
101-133MHz, 512 SCBs
[ 31.693434] initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after
29539948 usecs
[ 34.820009] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 34.820009] ata1.00: failed command: READ FPDMA QUEUED
[ 34.820009] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096
in
[ 34.820009] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 34.820009] ata1.00: status: { DRDY }
[ 34.820009] ata1: hard resetting link
[ 34.837701] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 34.837701] ata2.00: failed command: READ FPDMA QUEUED
[ 34.837701] ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096
in
[ 34.837701] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 34.837701] ata2.00: status: { DRDY }
[ 34.837701] ata2: hard resetting link
[ 35.320058] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.320248] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.360130] ata2.00: configured for UDMA/133
[ 35.360147] ata2.00: device reported invalid CHS sector 0
[ 35.360165] ata2: EH complete
[ 35.360562] ata1.00: configured for UDMA/133
[ 35.360574] ata1.00: device reported invalid CHS sector 0
[ 35.360590] ata1: EH complete
[ 37.816044] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0
0x0 0x0 0x24 0x0
[ 37.817596] scsi 0:0:0:0: Command already completed
[ 47.816038] scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0
0x0 0x0 0x0 0x0
[ 47.817578] scsi 0:0:0:0: Command already completed
[ 47.817616] scsi 0:0:0:0: Attempting to queue a TARGET RESET message:CDB:
0x12 0x0 0x0 0x0 0x24 0x0
[ 47.817652] scsi0: Device reset code sleeping
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |