Re: [Xen-devel] [PATCH V3 2/3] xen-blkfront: teach blkfront driver handle trim request

[Li Dongyang <lidongyang@xxxxxxxxxx>]

On Wed, Aug 24, 2011 at 6:42 PM, Jan Beulich <JBeulich@xxxxxxxxxx> wrote:
>>>> On 24.08.11 at 11:23, Li Dongyang <lidongyang@xxxxxxxxxx> wrote:
>> The blkfront driver now will read feature-trim from xenstore,
>> and set up the request queue with trim params, then we can forward the
>> discard requests to backend driver.
>>
>> Signed-off-by: Li Dongyang <lidongyang@xxxxxxxxxx>
>> ---
>>  drivers/block/xen-blkfront.c |  111 
>> +++++++++++++++++++++++++++++++++---------
>>  1 files changed, 88 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
>> index 9ea8c25..aa3cede 100644
>> --- a/drivers/block/xen-blkfront.c
>> +++ b/drivers/block/xen-blkfront.c
>> @@ -98,6 +98,9 @@ struct blkfront_info
>>       unsigned long shadow_free;
>>       unsigned int feature_flush;
>>       unsigned int flush_op;
>> +     unsigned int feature_trim;
>> +     unsigned int discard_granularity;
>> +     unsigned int discard_alignment;
>>       int is_ready;
>>  };
>>
>> @@ -302,29 +305,36 @@ static int blkif_queue_request(struct request *req)
>>               ring_req->operation = info->flush_op;
>>       }
>>
>> -     ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
>> -     BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
>> +     if (unlikely(req->cmd_flags & REQ_DISCARD)) {
>> +             /* id, sector_number and handle are set above. */
>> +             ring_req->operation = BLKIF_OP_TRIM;
>> +             ring_req->nr_segments = 0;
>> +             ring_req->u.trim.nr_sectors = blk_rq_sectors(req);
>> +     } else {
>> +             ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
>> +             BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
>>
>> -     for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
>> -             buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
>> -             fsect = sg->offset >> 9;
>> -             lsect = fsect + (sg->length >> 9) - 1;
>> -             /* install a grant reference. */
>> -             ref = gnttab_claim_grant_reference(&gref_head);
>> -             BUG_ON(ref == -ENOSPC);
>> +             for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
>> +                     buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
>> +                     fsect = sg->offset >> 9;
>> +                     lsect = fsect + (sg->length >> 9) - 1;
>> +                     /* install a grant reference. */
>> +                     ref = gnttab_claim_grant_reference(&gref_head);
>> +                     BUG_ON(ref == -ENOSPC);
>>
>> -             gnttab_grant_foreign_access_ref(
>> -                             ref,
>> -                             info->xbdev->otherend_id,
>> -                             buffer_mfn,
>> -                             rq_data_dir(req) );
>> -
>> -             info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
>> -             ring_req->u.rw.seg[i] =
>> -                             (struct blkif_request_segment) {
>> -                                     .gref       = ref,
>> -                                     .first_sect = fsect,
>> -                                     .last_sect  = lsect };
>> +                     gnttab_grant_foreign_access_ref(
>> +                                     ref,
>> +                                     info->xbdev->otherend_id,
>> +                                     buffer_mfn,
>> +                                     rq_data_dir(req));
>> +
>> +                     info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
>> +                     ring_req->u.rw.seg[i] =
>> +                                     (struct blkif_request_segment) {
>> +                                             .gref       = ref,
>> +                                             .first_sect = fsect,
>> +                                             .last_sect  = lsect };
>> +             }
>>       }
>>
>>       info->ring.req_prod_pvt++;
>> @@ -399,6 +409,7 @@ wait:
>>  static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
>>  {
>>       struct request_queue *rq;
>> +     struct blkfront_info *info = gd->private_data;
>>
>>       rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
>>       if (rq == NULL)
>> @@ -406,6 +417,13 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16
>> sector_size)
>>
>>       queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq);
>>
>> +     if (info->feature_trim) {
>> +             queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, rq);
>> +             blk_queue_max_discard_sectors(rq, get_capacity(gd));
>> +             rq->limits.discard_granularity = info->discard_granularity;
>> +             rq->limits.discard_alignment = info->discard_alignment;
>
> Don't you also need to set rq->limits.max_discard_sectors here (since
> when zero blkdev_issue_discard() doesn't do anything)? And wouldn't
> that need to be propagated from the backend, too?
the max_discard_sectors are set by blk_queue_max_discard_sectors() above ;-)
rq->limits.max_discard_sectors is the full phy device size, and if we
only assign
a partition to guest, the number is incorrect for guest, so the
max_discard_sectors should
be the capacity the guest will see, Thanks
>
>> +     }
>> +
>>       /* Hard sector size and max sectors impersonate the equiv. hardware. */
>>       blk_queue_logical_block_size(rq, sector_size);
>>       blk_queue_max_hw_sectors(rq, 512);
>> @@ -722,6 +740,19 @@ static irqreturn_t blkif_interrupt(int irq, void
>> *dev_id)
>>
>>               error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
>>               switch (bret->operation) {
>> +             case BLKIF_OP_TRIM:
>> +                     if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
>> +                             struct request_queue *rq = info->rq;
>> +                             printk(KERN_WARNING "blkfront: %s: trim op 
>> failed\n",
>> +                                        info->gd->disk_name);
>> +                             error = -EOPNOTSUPP;
>> +                             info->feature_trim = 0;
>> +                             spin_lock(rq->queue_lock);
>> +                             queue_flag_clear(QUEUE_FLAG_DISCARD, rq);
>> +                             spin_unlock(rq->queue_lock);
>> +                     }
>> +                     __blk_end_request_all(req, error);
>> +                     break;
>>               case BLKIF_OP_FLUSH_DISKCACHE:
>>               case BLKIF_OP_WRITE_BARRIER:
>>                       if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
>> @@ -1098,6 +1129,33 @@ blkfront_closing(struct blkfront_info *info)
>>       bdput(bdev);
>>  }
>>
>> +static void blkfront_setup_trim(struct blkfront_info *info)
>> +{
>> +     int err;
>> +     char *type;
>> +     unsigned int discard_granularity;
>> +     unsigned int discard_alignment;
>> +
>> +     type = xenbus_read(XBT_NIL, info->xbdev->otherend, "type", NULL);
>> +     if (IS_ERR(type))
>> +             return;
>> +
>> +     if (strncmp(type, "phy", 3) == 0) {
>> +             err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
>> +                     "discard-granularity", "%u", &discard_granularity,
>> +                     "discard-alignment", "%u", &discard_alignment,
>> +                     NULL);
>
> Let me repeat my wish to have these nodes start with "trim-" rather
> than "discard-", so they can be easily associated with the "feature-trim"
> one.
>
> Jan
>
>> +             if (!err) {
>> +                     info->feature_trim = 1;
>> +                     info->discard_granularity = discard_granularity;
>> +                     info->discard_alignment = discard_alignment;
>> +             }
>> +     } else if (strncmp(type, "file", 4) == 0)
>> +             info->feature_trim = 1;
>> +
>> +     kfree(type);
>> +}
>> +
>>  /*
>>   * Invoked when the backend is finally 'ready' (and has told produced
>>   * the details about the physical device - #sectors, size, etc).
>> @@ -1108,7 +1166,7 @@ static void blkfront_connect(struct blkfront_info
>> *info)
>>       unsigned long sector_size;
>>       unsigned int binfo;
>>       int err;
>> -     int barrier, flush;
>> +     int barrier, flush, trim;
>>
>>       switch (info->connected) {
>>       case BLKIF_STATE_CONNECTED:
>> @@ -1178,7 +1236,14 @@ static void blkfront_connect(struct blkfront_info
>> *info)
>>               info->feature_flush = REQ_FLUSH;
>>               info->flush_op = BLKIF_OP_FLUSH_DISKCACHE;
>>       }
>> -
>> +
>> +     err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
>> +                         "feature-trim", "%d", &trim,
>> +                         NULL);
>> +
>> +     if (!err && trim)
>> +             blkfront_setup_trim(info);
>> +
>>       err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
>>       if (err) {
>>               xenbus_dev_fatal(info->xbdev, err, "xlvbd_add at %s",
>
>
>
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel