[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] x86/IO-APIC: refine EOI-ing of migrating level interrupts



On 15/11/11 13:14, Jan Beulich wrote:
> Rather than going through all IO-APICs and calling io_apic_eoi_vector()
> for the vector in question, just use eoi_IO_APIC_irq().
>
> This in turn allows to eliminate quite a bit of other code.
>
> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>

Tested-and-acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> (tested
via backport to xen-4.1.x)

> --- a/xen/arch/x86/io_apic.c
> +++ b/xen/arch/x86/io_apic.c
> @@ -69,10 +69,6 @@ int __read_mostly nr_ioapics;
>  
>  #define ioapic_has_eoi_reg(apic) (mp_ioapics[(apic)].mpc_apicver >= 0x20)
>  
> -#define io_apic_eoi_vector(apic, vector) io_apic_eoi((apic), (vector), -1)
> -#define io_apic_eoi_pin(apic, pin) io_apic_eoi((apic), -1, (pin))
> -
> -
>  /*
>   * This is performance-critical, we want to do it O(1)
>   *
> @@ -213,21 +209,18 @@ static void ioapic_write_entry(
>      spin_unlock_irqrestore(&ioapic_lock, flags);
>  }
>  
> -/* EOI an IO-APIC entry.  One of vector or pin may be -1, indicating that
> - * it should be worked out using the other.  This function expect that the
> - * ioapic_lock is taken, and interrupts are disabled (or there is a good 
> reason
> - * not to), and that if both pin and vector are passed, that they refer to 
> the
> +/* EOI an IO-APIC entry.  Vector may be -1, indicating that it should be
> + * worked out using the pin.  This function expects that the ioapic_lock is
> + * being held, and interrupts are disabled (or there is a good reason not
> + * to), and that if both pin and vector are passed, that they refer to the
>   * same redirection entry in the IO-APIC. */
>  static void __io_apic_eoi(unsigned int apic, unsigned int vector, unsigned 
> int pin)
>  {
> -    /* Ensure some useful information is passed in */
> -    BUG_ON( (vector == -1 && pin == -1) );
> -    
>      /* Prefer the use of the EOI register if available */
>      if ( ioapic_has_eoi_reg(apic) )
>      {
>          /* If vector is unknown, read it from the IO-APIC */
> -        if ( vector == -1 )
> +        if ( vector == IRQ_VECTOR_UNASSIGNED )
>              vector = __ioapic_read_entry(apic, pin, TRUE).vector;
>  
>          *(IO_APIC_BASE(apic)+16) = vector;
> @@ -239,42 +232,6 @@ static void __io_apic_eoi(unsigned int a
>          struct IO_APIC_route_entry entry;
>          bool_t need_to_unmask = 0;
>  
> -        /* If pin is unknown, search for it */
> -        if ( pin == -1 )
> -        {
> -            unsigned int p;
> -            for ( p = 0; p < nr_ioapic_entries[apic]; ++p )
> -            {
> -                entry = __ioapic_read_entry(apic, p, TRUE);
> -                if ( entry.vector == vector )
> -                {
> -                    pin = p;
> -                    /* break; */
> -
> -                    /* Here should be a break out of the loop, but at the 
> -                     * Xen code doesn't actually prevent multiple IO-APIC
> -                     * entries being assigned the same vector, so EOI all
> -                     * pins which have the correct vector.
> -                     *
> -                     * Remove the following code when the above assertion
> -                     * is fulfilled. */
> -                    __io_apic_eoi(apic, vector, p);
> -                }
> -            }
> -            
> -            /* If search fails, nothing to do */
> -
> -            /* if ( pin == -1 ) */
> -
> -            /* Because the loop wasn't broken out of (see comment above),
> -             * all relevant pins have been EOI, so we can always return.
> -             * 
> -             * Re-instate the if statement above when the Xen logic has been
> -             * fixed.*/
> -
> -            return;
> -        }
> -
>          entry = __ioapic_read_entry(apic, pin, TRUE);
>  
>          if ( ! entry.mask )
> @@ -301,17 +258,6 @@ static void __io_apic_eoi(unsigned int a
>      }
>  }
>  
> -/* EOI an IO-APIC entry.  One of vector or pin may be -1, indicating that
> - * it should be worked out using the other.  This function disables 
> interrupts
> - * and takes the ioapic_lock */
> -static void io_apic_eoi(unsigned int apic, unsigned int vector, unsigned int 
> pin)
> -{
> -    unsigned int flags;
> -    spin_lock_irqsave(&ioapic_lock, flags);
> -    __io_apic_eoi(apic, vector, pin);
> -    spin_unlock_irqrestore(&ioapic_lock, flags);
> -}
> -
>  /*
>   * Saves all the IO-APIC RTE's
>   */
> @@ -1693,11 +1639,7 @@ static void end_level_ioapic_irq(struct 
>  
>      /* Manually EOI the old vector if we are moving to the new */
>      if ( vector && i != vector )
> -    {
> -        int ioapic;
> -        for (ioapic = 0; ioapic < nr_ioapics; ioapic++)
> -            io_apic_eoi_vector(ioapic, i);
> -    }
> +        eoi_IO_APIC_irq(desc);
>  
>      v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
>  
>
>

-- 
Andrew Cooper - Dom0 Kernel Engineer, Citrix XenServer
T: +44 (0)1223 225 900, http://www.citrix.com


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.