[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] After switching from "xm" to "xl" toolstack, can't get Guest networking to work.



On Mon, 2012-01-23 at 15:28 +0000, erin.balid@xxxxxxxxxxxx wrote:
> Hi Ian.
> 
> On Mon, Jan 23, 2012, at 11:27 AM, Ian Campbell wrote:
> > ISTRT xl had a bug at one point where it would fail to strip whitespace
> > in the network KVP lists. i.e. the above ended up expecting to find a
> > bridge named "br0  ". Can you try without the spaces please?
> 
> Edit the configuration file.
> 
>  - vif          = [ 'mac=00:16:3E:12:34:01, bridge=br0' ]
>  + vif=['mac=00:16:3E:12:34:01,bridge=br0']
>
[...]
> brctl show
>  bridge name     bridge id               STP enabled     interfaces
>  br0             8000.0052351d5337       yes             eth0

Hrm. The device simply isn't on the bridge. Does "ifconfig -a" in dom0
show a vifX.Y device for the domain? You previous xenstore log suggests
it should be there but lets double check.

Do you get anything in the logs under /var/log/xen?

Are your hotplug scripts running at all? One trick I usually use is to
add to the top of vif-bridge something like:
        exec 1>>/tmp/hotplog.log
        exec 2>&1
        echo "`date`: Running $0 $*"
Then any hotplug script which gets run will dump its output
to /tmp/hotplug.log.

http://wiki.xen.org/wiki/Reporting_Bugs_against_Xen lists a bunch of
configuration files and logs which might be of interest, at least to
skim looking for anything odd.

Ian.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.