[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [xen-unstable test] 13677: regressions - FAIL
On Wed, 2012-09-12 at 12:15 +0100, Jan Beulich wrote: > >>> On 12.09.12 at 12:35, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote: > > On Wed, 2012-09-12 at 11:12 +0100, Ian Campbell wrote: > >> On Wed, 2012-09-12 at 11:08 +0100, Jan Beulich wrote: > >> > > Is it outside the realms of possibility that the guest has managed to > >> > > limp along with the RTC being broken in some subtle way and only > >> > > eventually trips up when we come to shut down? > >> > > >> > That's certainly not impossible, but afaik Linux doesn't play with > >> > the RTC unless told to by user space > >> > >> I did wonder about an /etc/init.d/hwclock type thing, but I think that > >> would have run much earlier than this point. > >> > >> > (whereas Windows, as we > >> > know from the reporter of the problem that triggered putting > >> > together these changes, does on its own at least under certain > >> > circumstances, yet the Windows tests all go through fine). > >> > > >> > Certainly this is the most likely candidate for having broken > >> > something, and hence would be the prime candidate for reverting. > >> > But before doing so, I'd want to see at least another run's results. > >> > >> Ack. I'm installing a RHEL6.1 HVM guest anyway, since it's handy to have > >> one in my pocket. > > > > 25876:35fa512c60b2 "gnttab: cleanup of number-of-active-frames > > calculations" for both => hangs: > > Syncing hardware clock to system time [ OK ] > > Turning off swap: [ OK ] > > Unmounting file systems: [ OK ] > > init: Re-executing /sbin/init > > <silence> > > > > Reverting just 25843:51090fe1ab97 "x86/HVM: assorted RTC emulation > > adjustments" on top of 35fa... => works again. > > In that case I'll just revert it in -unstable too. No idea what's wrong > with it, though. I see you've done the revert. In case it is helpful the list of blocked tasks (from SysRQ-t) is below. Not sure if/how ps2 might relate to the rtc... BTW, I couldn't repro with a Debian Squeeze kernel... Ian. SysRq : Show Blocked State task PC stack pid father init D c0477b83 0 1 0 0x00000000 ee470ab0 00000086 ee485c70 c0477b83 000f4240 00000000 00000000 004dd658 00000000 ef12a200 00000033 00000001 00000033 c0ae2120 c0ae2120 ee470d58 c0ae2120 c0addb54 c0ae2120 ee470d58 ec8ce000 00000000 ee494000 00000004 Call Trace: [<c0477b83>] ? hrtimer_forward+0x163/0x1b0 [<c0463430>] ? run_timer_softirq+0x20/0x2c0 [<c04b6494>] ? __rcu_process_callbacks+0x44/0x2d0 [<c04b6755>] ? rcu_process_callbacks+0x35/0x40 [<c0459c35>] ? __do_softirq+0xb5/0x1b0 [<c08231e5>] ? schedule_timeout+0x195/0x250 [<c05f1245>] ? idr_remove+0x125/0x1b0 [<c055c0b7>] ? fsnotify_add_notify_event+0xf7/0x240 [<c0822f49>] ? wait_for_common+0xe9/0x150 [<c044bf70>] ? default_wake_function+0x0/0x10 [<c04712e0>] ? synchronize_sched+0x40/0x50 [<c04712f0>] ? wakeme_after_rcu+0x0/0x10 [<c04795ac>] ? __synchronize_srcu+0x3c/0xc0 [<c04712a0>] ? synchronize_sched+0x0/0x50 [<c055c46d>] ? fsnotify_put_group+0x4d/0x80 [<c055e7a2>] ? inotify_release+0x12/0x20 [<c052987c>] ? __fput+0xdc/0x1f0 [<c05256b7>] ? filp_close+0x47/0x80 [<c0525757>] ? sys_close+0x67/0xb0 [<c052de9c>] ? setup_new_exec+0x17c/0x240 [<c0569e93>] ? load_elf_binary+0x323/0x1690 [<c05f627b>] ? strrchr+0xb/0x20 [<c04fdb4b>] ? follow_page+0x33b/0x3f0 [<c0502781>] ? __get_user_pages+0xf1/0x430 [<c0473f20>] ? autoremove_wake_function+0x0/0x40 [<c052d35c>] ? acct_arg_size+0x4c/0x70 [<c052e5e8>] ? get_arg_page+0x88/0xb0 [<c0569b70>] ? load_elf_binary+0x0/0x1690 [<c052ecf0>] ? search_binary_handler+0xf0/0x310 [<c052fc3e>] ? do_execve+0x1ee/0x2b0 [<c05fa122>] ? strncpy_from_user+0x32/0x60 [<c0408215>] ? sys_execve+0x25/0x60 [<c0409adf>] ? sysenter_do_call+0x12/0x28 halt D ec151da8 0 1218 1 0x00000080 eec50030 00000082 00000002 ec151da8 c1a03b54 00000000 00000000 c04b2105 0000000c eedee580 00000033 352530de 00000033 c0ae2120 c0ae2120 eec502d8 c0ae2120 c0addb54 c0ae2120 eec502d8 c1a03b54 00000001 fffec5c4 eec50030 Call Trace: [<c04b2105>] ? handle_IRQ_event+0x45/0x140 [<c0459e95>] ? irq_exit+0x35/0x70 [<c040b1c0>] ? do_IRQ+0x50/0xc0 [<c040a030>] ? common_interrupt+0x30/0x38 [<c082317c>] ? schedule_timeout+0x12c/0x250 [<c0824839>] ? _spin_unlock_irqrestore+0x9/0x10 [<c0462de0>] ? process_timeout+0x0/0x10 [<c0726317>] ? __ps2_command+0x247/0x3a0 [<c0473f20>] ? autoremove_wake_function+0x0/0x40 [<c07264e4>] ? ps2_command+0x24/0x40 [<c07233b8>] ? serio_cleanup+0x28/0x40 [<c06ae900>] ? device_shutdown+0x40/0x150 [<c0479bf7>] ? blocking_notifier_call_chain+0x17/0x20 [<c046d86d>] ? kernel_power_off+0xd/0x40 [<c046db38>] ? sys_reboot+0x108/0x210 [<c07702d6>] ? sys_recvfrom+0x146/0x160 [<c0775d28>] ? skb_dequeue+0x48/0x70 [<c07764a4>] ? skb_queue_purge+0x14/0x20 [<c055cbcc>] ? fsnotify_clear_marks_by_inode+0x1c/0xb0 [<c053ca06>] ? dput+0x76/0x110 [<c0529904>] ? __fput+0x164/0x1f0 [<c0541cc5>] ? mntput_no_expire+0x15/0xd0 [<c04adecc>] ? audit_syscall_entry+0x21c/0x240 [<c04adbe6>] ? audit_syscall_exit+0x216/0x240 [<c0409adf>] ? sysenter_do_call+0x12/0x28 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |