|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Xen pciback not working: "address space collision: [mem ...] conflicts with System RAM [mem ...]"
On Tue, Aug 27, 2013 at 11:03:02PM +0200, Andrea Brugiolo wrote: > On Fri, Aug 23, 2013 at 02:54:30PM -0400, Konrad Rzeszutek Wilk wrote: > > > > Awaiting your response with the usage of 'xl'. > > > > > > Now I am using `xl' and the > > > > > > e820_host = 1 > > > > > > option in the domU configuration but I get the same result as before > > > and no device attached: > > > > And this is with Xen 4.2 I presume? > > No, Xen 4.1 (Debian 4.1.4-3+deb7u1 Xen hypervisor and libs) OK, Xen 4.1 did not have the code to handle the e820_host so hence the reason for this not working :-(. You will need to upgrade to Xen 4.2 at least. I don't know how that is done under Debian. > > > What does your guest config look like and > > if you do 'xl -vvvv create ' can you attach the output? > > > > Also can you provide the full guest bootup log (xl console output). > > Please find attached: > > - domU configuration -> efferax.cfg > - output of `xl -vvvv create' (dom0 console) -> xl-vvvv-create.log > - output of `dmesg' in domU -> domU-dmesg.log > > Recall: > > - dom0 is Debian GNU/Linux 7.1 with Debian kernel 3.2.0-4-amd64 > (3.2.46-1) and Xen 4.1.4-3+deb7u1 machinery > > - domU is Debian GNU/Linux 6.0.7 with the same kernel > > > > > [ 152.098815] pcifront pci-0: Installing PCI frontend > > > > [ 152.099141] pcifront pci-0: Creating PCI Frontend Bus 0000:09 > > > > [ 152.100134] pci 0000:09:08.0: [1000:0030] type 0 class 0x000100 > > > > [ 152.100666] pci 0000:09:08.0: reg 10: [io 0x5000-0x50ff] > > > > [ 152.101055] pci 0000:09:08.0: reg 14: [mem 0xf9e00000-0xf9e1ffff > > > > 64bit] > > > > [ 152.101465] pci 0000:09:08.0: reg 1c: [mem 0xf9e20000-0xf9e3ffff > > > > 64bit] > > > > [ 152.103112] pci 0000:09:08.0: supports D1 D2 > > > > [ 152.109991] pcifront pci-0: claiming resource 0000:09:08.0/0 > > > > [ 152.110002] pcifront pci-0: claiming resource 0000:09:08.0/1 > > > > [ 152.110010] pci 0000:09:08.0: address space collision: [mem > > > > 0xf9e00000-0xf9e1ffff 64bit] conflicts with System RAM [mem > > > > 0x00100000-0x4007fffff] > > > > So a 16GB guest right? > > Right, as you can see it in the domU config: > > maxmem = '16384' > memory = '2048' > > but the 'conflict' is still there even if I set maxmem to 2048 or > leave it unset. > > > I am still puzzled why the 'e820_host=1' option did not trigger for you. > > Did you also have 'pci=[blabla]' in your guest config or did you do > > it via pci hotplugging? > > I tried both and got the same result. > > This last time I set the pci=[...] option in the domU config (just for > the scsi controller, as you can see). > > Thank you very much for your attention, I really don't have a clue! > > Andrea > # > # Configuration file for the Xen instance efferax, created > # by xen-tools 3.9 on Tue Mar 4 20:42:19 2008. > # > > # > # Kernel + memory size > # > kernel = '/boot/vmlinuz-3.2.0-4-amd64' > ramdisk = '/boot/initrd.img-3.2.0-4-amd64' > maxmem = '16384' > memory = '2048' > vcpus = 4 > > # > # Disk device(s). > # > root = '/dev/xvda1 ro' > disk = [ > 'phy:/dev/grp_ext02/efferax-disk,xvda1,w', > 'phy:/dev/grp_ext02/efferax-swap,xvda2,w', > 'phy:/dev/grp_ext02/efferax-homes,xvda3,w', > 'phy:/dev/grp_ext12/efferax-bacula-storage,xvdb1,w', > 'phy:/dev/grp_ext14/efferax-images-storage,xvdc1,w', > 'phy:/dev/grp_ext15/efferax-postgresql,xvdd1,w', > 'phy:/dev/grp_ext16/efferax-homes,xvde1,w' > ] > > # > # Hostname > # > name = 'efferax' > > e820_host = 1 > > # Don't delegate the second nic > vif = [ 'ip=192.168.1.1,mac=00:16:3e:49:52:e6,bridge=xenbr1' ] > > # Delegate just the scsi controller for the tape changer > pci = [ '0000:09:08.0' ] > > # Linux kernel >= 2.6.32-5-xen > extra = "iommu=soft" > > # > # Behaviour > # > on_poweroff = 'destroy' > on_reboot = 'restart' > on_crash = 'restart' > srv01:~# xl -vvvv create -c /etc/xen/efferax.cfg > Parsing config file /etc/xen/efferax.cfg > domainbuilder: detail: xc_dom_allocate: cmdline="root=/dev/xvda1 ro > iommu=soft", features="(null)" > domainbuilder: detail: xc_dom_kernel_file: > filename="/boot/vmlinuz-3.2.0-4-amd64" > domainbuilder: detail: xc_dom_malloc_filemap : 2769 kB > domainbuilder: detail: xc_dom_ramdisk_file: > filename="/boot/initrd.img-3.2.0-4-amd64" > domainbuilder: detail: xc_dom_malloc_filemap : 11040 kB > domainbuilder: detail: xc_dom_boot_xen_init: ver 4.1, caps xen-3.0-x86_64 > xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 > domainbuilder: detail: xc_dom_parse_image: called > domainbuilder: detail: xc_dom_find_loader: trying multiboot-binary loader ... > domainbuilder: detail: loader probe failed > domainbuilder: detail: xc_dom_find_loader: trying Linux bzImage loader ... > domainbuilder: detail: xc_dom_malloc : 11430 kB > domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0x2a93a1 -> 0xb299c0 > domainbuilder: detail: loader probe OK > xc: detail: elf_parse_binary: phdr: paddr=0x1000000 memsz=0x553000 > xc: detail: elf_parse_binary: phdr: paddr=0x1600000 memsz=0x950e0 > xc: detail: elf_parse_binary: phdr: paddr=0x1696000 memsz=0x14400 > xc: detail: elf_parse_binary: phdr: paddr=0x16ab000 memsz=0x292000 > xc: detail: elf_parse_binary: memory: 0x1000000 -> 0x193d000 > xc: detail: elf_xen_parse_note: GUEST_OS = "linux" > xc: detail: elf_xen_parse_note: GUEST_VERSION = "2.6" > xc: detail: elf_xen_parse_note: XEN_VERSION = "xen-3.0" > xc: detail: elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > xc: detail: elf_xen_parse_note: ENTRY = 0xffffffff816ab200 > xc: detail: elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 > xc: detail: elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > xc: detail: elf_xen_parse_note: PAE_MODE = "yes" > xc: detail: elf_xen_parse_note: LOADER = "generic" > xc: detail: elf_xen_parse_note: unknown xen elf note (0xd) > xc: detail: elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > xc: detail: elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > xc: detail: elf_xen_parse_note: PADDR_OFFSET = 0x0 > xc: detail: elf_xen_addr_calc_check: addresses: > xc: detail: virt_base = 0xffffffff80000000 > xc: detail: elf_paddr_offset = 0x0 > xc: detail: virt_offset = 0xffffffff80000000 > xc: detail: virt_kstart = 0xffffffff81000000 > xc: detail: virt_kend = 0xffffffff8193d000 > xc: detail: virt_entry = 0xffffffff816ab200 > xc: detail: p2m_base = 0xffffffffffffffff > domainbuilder: detail: xc_dom_parse_elf_kernel: xen-3.0-x86_64: > 0xffffffff81000000 -> 0xffffffff8193d000 > domainbuilder: detail: xc_dom_mem_init: mem 2048 MB, pages 0x80000 pages, 4k > each > domainbuilder: detail: xc_dom_mem_init: 0x80000 pages > domainbuilder: detail: xc_dom_boot_mem_init: called > domainbuilder: detail: x86_compat: guest xen-3.0-x86_64, address size 64 > domainbuilder: detail: xc_dom_malloc : 4096 kB > domainbuilder: detail: xc_dom_build_image: called > domainbuilder: detail: xc_dom_alloc_segment: kernel : > 0xffffffff81000000 -> 0xffffffff8193d000 (pfn 0x1000 + 0x93d pages) > domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0x93d at > 0x7fa55b123000 > xc: detail: elf_load_binary: phdr 0 at 0x0x7fa55b123000 -> 0x0x7fa55b676000 > xc: detail: elf_load_binary: phdr 1 at 0x0x7fa55b723000 -> 0x0x7fa55b7b80e0 > xc: detail: elf_load_binary: phdr 2 at 0x0x7fa55b7b9000 -> 0x0x7fa55b7cd400 > xc: detail: elf_load_binary: phdr 3 at 0x0x7fa55b7ce000 -> 0x0x7fa55b84c000 > domainbuilder: detail: xc_dom_alloc_segment: ramdisk : > 0xffffffff8193d000 -> 0xffffffff8392e000 (pfn 0x193d + 0x1ff1 pages) > domainbuilder: detail: xc_dom_malloc : 191 kB > domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x193d+0x1ff1 at > 0x7fa559132000 > domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0xac836c -> 0x1ff0810 > domainbuilder: detail: xc_dom_alloc_segment: phys2mach : > 0xffffffff8392e000 -> 0xffffffff83d2e000 (pfn 0x392e + 0x400 pages) > domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x392e+0x400 at > 0x7fa558d32000 > domainbuilder: detail: xc_dom_alloc_page : start info : > 0xffffffff83d2e000 (pfn 0x3d2e) > domainbuilder: detail: xc_dom_alloc_page : xenstore : > 0xffffffff83d2f000 (pfn 0x3d2f) > domainbuilder: detail: xc_dom_alloc_page : console : > 0xffffffff83d30000 (pfn 0x3d30) > domainbuilder: detail: nr_page_tables: 0x0000ffffffffffff/48: > 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) > domainbuilder: detail: nr_page_tables: 0x0000007fffffffff/39: > 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) > domainbuilder: detail: nr_page_tables: 0x000000003fffffff/30: > 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) > domainbuilder: detail: nr_page_tables: 0x00000000001fffff/21: > 0xffffffff80000000 -> 0xffffffff83ffffff, 32 table(s) > domainbuilder: detail: xc_dom_alloc_segment: page tables : > 0xffffffff83d31000 -> 0xffffffff83d54000 (pfn 0x3d31 + 0x23 pages) > domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x3d31+0x23 at > 0x7fa55f564000 > domainbuilder: detail: xc_dom_alloc_page : boot stack : > 0xffffffff83d54000 (pfn 0x3d54) > domainbuilder: detail: xc_dom_build_image : virt_alloc_end : > 0xffffffff83d55000 > domainbuilder: detail: xc_dom_build_image : virt_pgtab_end : > 0xffffffff84000000 > domainbuilder: detail: xc_dom_boot_image: called > domainbuilder: detail: arch_setup_bootearly: doing nothing > domainbuilder: detail: xc_dom_compat_check: supported guest type: > xen-3.0-x86_64 <= matches > domainbuilder: detail: xc_dom_compat_check: supported guest type: > xen-3.0-x86_32p > domainbuilder: detail: xc_dom_compat_check: supported guest type: > hvm-3.0-x86_32 > domainbuilder: detail: xc_dom_compat_check: supported guest type: > hvm-3.0-x86_32p > domainbuilder: detail: xc_dom_compat_check: supported guest type: > hvm-3.0-x86_64 > domainbuilder: detail: xc_dom_update_guest_p2m: dst 64bit, pages 0x80000 > domainbuilder: detail: clear_page: pfn 0x3d30, mfn 0x61eae2 > domainbuilder: detail: clear_page: pfn 0x3d2f, mfn 0x32b887 > domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x3d2e+0x1 at > 0x7fa55f599000 > domainbuilder: detail: start_info_x86_64: called > domainbuilder: detail: setup_hypercall_page: vaddr=0xffffffff81001000 > pfn=0x1001 > domainbuilder: detail: domain builder memory footprint > domainbuilder: detail: allocated > domainbuilder: detail: malloc : 15801 kB > domainbuilder: detail: anon mmap : 0 bytes > domainbuilder: detail: mapped > domainbuilder: detail: file mmap : 13810 kB > domainbuilder: detail: domU mmap : 45 MB > domainbuilder: detail: arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xcfc4e > domainbuilder: detail: shared_info_x86_64: called > domainbuilder: detail: vcpu_x86_64: called > domainbuilder: detail: vcpu_x86_64: cr3: pfn 0x3d31 mfn 0x32b886 > domainbuilder: detail: launch_vm: called, ctxt=0x7fff0bfcd3d0 > domainbuilder: detail: xc_dom_release: called > libxl: debug: libxl_pci.c:254:libxl_create_pci_backend Creating pci backend > Daemon running with PID 18058 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) > (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1 > [ 0.000000] Command line: root=/dev/xvda1 ro iommu=soft > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] Released 0 pages of unused memory > [ 0.000000] Set 0 page(s) to 1-1 mapping > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000400800000 (usable) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI not present or invalid. > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x400800 max_arch_pfn = 0x400000000 > [ 0.000000] last_pfn = 0x100000 max_arch_pfn = 0x400000000 > [ 0.000000] init_memory_mapping: 0000000000000000-0000000100000000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000400800000 > [ 0.000000] RAMDISK: 0193d000 - 0392e000 > [ 0.000000] NUMA turned off > [ 0.000000] Faking a node at 0000000000000000-0000000400800000 > [ 0.000000] Initmem setup node 0 0000000000000000-0000000400800000 > [ 0.000000] NODE_DATA [000000007e7e9000 - 000000007e7edfff] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00400800 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x000000a0 > [ 0.000000] 0: 0x00000100 -> 0x00400800 > [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] No local APIC present > [ 0.000000] APIC: disable apic facility > [ 0.000000] APIC: switched to apic NOOP > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 0000000000100000 > [ 0.000000] PCI: Warning: Cannot find a gap in the 32bit address range > [ 0.000000] PCI: Unassigned devices with 32bit resource registers may > break! > [ 0.000000] Allocating PCI resources starting at 400900000 (gap: > 400900000:400000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.1.4 (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007e400000 s82944 r8192 > d23552 u524288 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 4136848 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: root=/dev/xvda1 ro iommu=soft > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Placing 64MB software IO TLB between ffff880069c00000 - > ffff88006dc00000 > [ 0.000000] software IO TLB at phys 0x69c00000 - 0x6dc00000 > [ 0.000000] Memory: 1720324k/16785408k available (3425k kernel code, 448k > absent, 15064636k reserved, 3314k data, 576k init) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] NR_IRQS:33024 nr_irqs:304 16 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 2400.188 MHz processor. > [ 0.000000] Marking TSC unstable due to TSCs unsynchronized > [ 0.004000] Calibrating delay loop (skipped), value calculated using timer > frequency.. 4800.37 BogoMIPS (lpj=9600752) > [ 0.004000] pid_max: default: 32768 minimum: 301 > [ 0.004000] Security Framework initialized > [ 0.004000] AppArmor: AppArmor disabled by boot time parameter > [ 0.006262] Dentry cache hash table entries: 2097152 (order: 12, 16777216 > bytes) > [ 0.020001] Inode-cache hash table entries: 1048576 (order: 11, 8388608 > bytes) > [ 0.025607] Mount-cache hash table entries: 256 > [ 0.025813] Initializing cgroup subsys cpuacct > [ 0.025826] Initializing cgroup subsys memory > [ 0.025850] Initializing cgroup subsys devices > [ 0.025857] Initializing cgroup subsys freezer > [ 0.025863] Initializing cgroup subsys net_cls > [ 0.025869] Initializing cgroup subsys blkio > [ 0.025883] Initializing cgroup subsys perf_event > [ 0.026040] CPU: Physical Processor ID: 1 > [ 0.026046] CPU: Processor Core ID: 0 > [ 0.026077] SMP alternatives: switching to UP code > [ 0.043264] Performance Events: > [ 0.043273] no APIC, boot with the "lapic" boot parameter to force-enable > it. > [ 0.043281] no hardware sampling interrupt available. > [ 0.043303] Broken PMU hardware detected, using software events only. > [ 0.043537] NMI watchdog disabled (cpu0): hardware events not enabled > [ 0.043732] installing Xen timer for CPU 1 > [ 0.043790] SMP alternatives: switching to SMP code > [ 0.060336] NMI watchdog disabled (cpu1): hardware events not enabled > [ 0.060525] installing Xen timer for CPU 2 > [ 0.060735] NMI watchdog disabled (cpu2): hardware events not enabled > [ 0.060908] installing Xen timer for CPU 3 > [ 0.061170] NMI watchdog disabled (cpu3): hardware events not enabled > [ 0.061207] Brought up 4 CPUs > [ 0.061373] devtmpfs: initialized > [ 0.066314] Grant table initialized > [ 0.066314] print_constraints: dummy: > [ 0.066314] NET: Registered protocol family 16 > [ 0.066314] PCI: setting up Xen PCI frontend stub > [ 0.068914] bio: create slab <bio-0> at 0 > [ 0.068914] ACPI: Interpreter disabled. > [ 0.068914] xen/balloon: Initialising balloon driver. > [ 0.172065] xen-balloon: Initialising balloon driver. > [ 0.173044] vgaarb: loaded > [ 0.173044] PCI: System does not support PCI > [ 0.173044] PCI: System does not support PCI > [ 0.173044] Switching to clocksource xen > [ 0.174395] pnp: PnP ACPI: disabled > [ 0.179206] NET: Registered protocol family 2 > [ 0.180947] IP route cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.187833] TCP established hash table entries: 524288 (order: 11, 8388608 > bytes) > [ 0.193673] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.194302] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.194315] TCP reno registered > [ 0.194439] UDP hash table entries: 8192 (order: 6, 262144 bytes) > [ 0.194721] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) > [ 0.195093] NET: Registered protocol family 1 > [ 0.195181] Unpacking initramfs... > [ 0.265248] Freeing initrd memory: 32708k freed > [ 0.288426] platform rtc_cmos: registered platform RTC device (no PNP > device found) > [ 0.289021] audit: initializing netlink socket (disabled) > [ 0.289054] type=2000 audit(1377634607.461:1): initialized > [ 0.305251] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.305935] VFS: Disk quotas dquot_6.5.2 > [ 0.306016] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.306161] msgmni has been set to 3423 > [ 0.306592] alg: No test for stdrng (krng) > [ 0.306684] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 0.306700] io scheduler noop registered > [ 0.306705] io scheduler deadline registered > [ 0.306770] io scheduler cfq registered (default) > [ 0.306892] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.306930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.306938] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.307726] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.476269] Linux agpgart interface v0.103 > [ 0.476397] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 1.486246] i8042: No controller found > [ 1.486489] mousedev: PS/2 mouse device common for all mice > [ 1.526382] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 1.526467] rtc_cmos: probe of rtc_cmos failed with error -38 > [ 1.526786] TCP cubic registered > [ 1.526982] NET: Registered protocol family 10 > [ 1.527604] Mobile IPv6 > [ 1.527614] NET: Registered protocol family 17 > [ 1.527623] Registering the dns_resolver key type > [ 1.527989] registered taskstats version 1 > [ 1.528031] XENBUS: Device with no driver: device/vbd/51713 > [ 1.528038] XENBUS: Device with no driver: device/vbd/51714 > [ 1.528044] XENBUS: Device with no driver: device/vbd/51715 > [ 1.528050] XENBUS: Device with no driver: device/vbd/51729 > [ 1.528080] XENBUS: Device with no driver: device/vbd/51745 > [ 1.528087] XENBUS: Device with no driver: device/vbd/51761 > [ 1.528093] XENBUS: Device with no driver: device/vbd/51777 > [ 1.528099] XENBUS: Device with no driver: device/vif/0 > [ 1.528105] XENBUS: Device with no driver: device/pci/0 > [ 1.528121] /build/linux-s5x2oE/linux-3.2.46/drivers/rtc/hctosys.c: unable > to open rtc device (rtc0) > [ 1.528157] Initializing network drop monitor service > [ 1.528627] Freeing unused kernel memory: 576k freed > [ 1.528948] Write protecting the kernel read-only data: 6144k > [ 1.533486] Freeing unused kernel memory: 652k freed > [ 1.534419] Freeing unused kernel memory: 692k freed > Loading, please wait... > [ 1.575804] udevd[60]: starting version 175 > [ 1.591209] input: PC Speaker as /devices/platform/pcspkr/input/input0 > [ 1.612023] Initialising Xen virtual ethernet driver. > [ 1.673559] blkfront: xvda1: barrier or flush: disabled > [ 1.679525] blkfront: xvda2: barrier or flush: disabled > [ 1.681532] Setting capacity to 62914560 > [ 1.685275] blkfront: xvda3: barrier or flush: disabled > [ 1.690960] blkfront: xvdb1: barrier or flush: disabled > [ 1.694827] blkfront: xvdc1: barrier or flush: disabled > [ 1.702850] blkfront: xvdd1: barrier or flush: disabled > [ 1.705665] Setting capacity to 4194304 > [ 1.706653] blkfront: xvde1: barrier or flush: disabled > [ 1.713448] Setting capacity to 587198464 > [ 1.713741] Setting capacity to 69197824 > [ 1.714187] Setting capacity to 446685184 > [ 1.714627] Setting capacity to 232775680 > [ 1.714642] xvdd1: detected capacity change from 0 to 119181148160 > [ 1.715104] Setting capacity to 1331683328 > Begin: Loading essential drivers ... [ 2.322690] SCSI subsystem initialized > [ 2.323661] SCSI Media Changer driver v0.25 > [ 2.364323] RPC: Registered named UNIX socket transport module. > [ 2.364341] RPC: Registered udp transport module. > [ 2.364346] RPC: Registered tcp transport module. > [ 2.364352] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 2.376933] Fusion MPT base driver 3.04.20 > [ 2.376950] Copyright (c) 1999-2008 LSI Corporation > [ 2.390208] Fusion MPT SPI Host driver 3.04.20 > [ 2.396782] FS-Cache: Loaded > [ 2.409835] FS-Cache: Netfs 'nfs' registered for caching > [ 2.424190] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > [ 2.453341] st: Version 20101219, fixed bufsize 32768, s/g segs 256 > done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ > 2.467341] device-mapper: uevent: version 1.0.3 > [ 2.467536] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > done. > Begin: Running /scripts/local-premount ... done. > [ 2.683099] kjournald starting. Commit interval 5 seconds > [ 2.683129] EXT3-fs (xvda1): mounted filesystem with ordered data mode > Begin: Running /scripts/local-bottom ... done. > done. > Begin: Running /scripts/init-bottom ... done. > INIT: version 2.88 booting > Using makefile-style concurrent boot in runlevel S. > Starting the hotplug events dispatcher: udevd[ 5.344134] udev[221]: > starting version 164 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...[ 5.866353] pcifront pci-0: > Installing PCI frontend > [ 5.866651] pcifront pci-0: Creating PCI Frontend Bus 0000:09 > [ 5.871583] pcifront pci-0: claiming resource 0000:09:08.0/0 > [ 5.871595] pcifront pci-0: claiming resource 0000:09:08.0/1 > [ 5.871603] pci 0000:09:08.0: address space collision: [mem > 0xf9e00000-0xf9e1ffff 64bit] conflicts with System RAM [mem > 0x00100000-0x4007fffff] > [ 5.871616] pcifront pci-0: Could not claim resource 0000:09:08.0/1! > Device offline. Try using e820_host=1 in the guest config. > [ 5.871626] pcifront pci-0: claiming resource 0000:09:08.0/3 > [ 5.871634] pci 0000:09:08.0: address space collision: [mem > 0xf9e20000-0xf9e3ffff 64bit] conflicts with System RAM [mem > 0x00100000-0x4007fffff] > [ 5.871646] pcifront pci-0: Could not claim resource 0000:09:08.0/3! > Device offline. Try using e820_host=1 in the guest config. > [ 5.872618] mptspi 0000:09:08.0: device not available (can't reserve [mem > 0xf9e00000-0xf9e1ffff 64bit]) > [ 5.872630] mptbase: ioc0: ERROR - pci_enable_device_mem() failed > [ 6.159193] powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2216 > (4 cpu cores) (version 2.20.00) > [ 6.159226] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects > found. > [ 6.159228] [Firmware Bug]: powernow-k8: Try again with latest BIOS. > done. > hwclockfirst.sh: Permission denied > Activating swap...[ 6.850939] Adding 2097148k swap on /dev/xvda2. > Priority:-1 extents:1 across:2097148k SS > [ 6.862659] Adding 34598908k swap on /dev/xvdb1. Priority:-2 extents:1 > across:34598908k SS > done. > Checking root file system...fsck from util-linux-ng 2.17.2 > /dev/xvda1: clean, 169122/1966080 files, 5041466/7864320 blocks > done. > [ 7.508893] EXT3-fs (xvda1): using internal journal > hwclock.sh: Permission denied > Loading kernel modules...done. > Cleaning up ifupdown.... > Setting up networking.... > Activating lvm and md swap...done. > Checking file systems...fsck from util-linux-ng 2.17.2 > /dev/xvda3: clean, 458413/18350080 files, 54337315/73399808 blocks > /dev/xvdc1: clean, 360/13959168 files, 37131025/55835648 blocks > /dev/xvdd1: clean, 2291/7274496 files, 13387767/29096960 blocks > /dev/xvde1: clean, 837456/41615360 files, 79713261/166460416 blocks > done. > Mounting local filesystems...[ 10.411287] kjournald starting. Commit > interval 5 seconds > [ 10.411746] EXT3-fs (xvda3): using internal journal > [ 10.411766] EXT3-fs (xvda3): mounted filesystem with ordered data mode > mount: il mount point /home/images non esiste > [ 10.969165] kjournald starting. Commit interval 5 seconds > [ 10.969552] EXT3-fs (xvdd1): using internal journal > [ 10.969566] EXT3-fs (xvdd1): mounted filesystem with ordered data mode > [ 11.048772] kjournald starting. Commit interval 5 seconds > [ 11.049945] EXT3-fs (xvde1): using internal journal > [ 11.049960] EXT3-fs (xvde1): mounted filesystem with ordered data mode > failed. > Activating swapfile swap...done. > Cleaning up temporary files.... > Setting kernel variables ...done. > Configuring network interfaces...done. > Starting portmap daemon.... > Starting NFS common utilities: statd idmapd gssd. > Cleaning up temporary files.... > Setting up ALSA...done (none loaded). > Setting console screen modes and fonts. > cannot (un)set powersave mode > ng sensors limits. > startpar: service(s) returned failure: hwclockfirst.sh hwclock.sh ... failed! > INIT: Entering runlevel: 2 > Using makefile-style concurrent boot in runlevel 2. > Starting portmap daemon...Already running.. > Starting uptime daemon: ud. > ud[767]: Uptime daemon starting... > Starting NFS common utilities: statd idmapd gssd. > [ 22.208282] svc: failed to register lockdv1 RPC service (errno 97). > [ 22.208411] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state > recovery directory > [ 22.246487] NFSD: starting 90-second grace period > Exporting directories for NFS kernel daemon.... > Starting NFS kernel daemon: nfsd svcgssd mountd. > Starting enhanced syslogd: rsyslogd. > Turning on process accounting, file set to '/var/log/account/pacct'. > Done.. > Starting Samba daemons: nmbd smbd. > Starting web server: apache2. > Starting Ethernet/FDDI station monitor daemon: (chown arpwatch > /var/lib/arpwatch/arp.dat) arpwatch. > Starting deferred execution scheduler: atd. > Starting Bacula Storage daemon...:. > Starting Bacula File daemon...:. > Starting Bacula Director...:. > Starting internet superserver: inetd. > Starting Name Service Cache Daemon: nscd. > Starting NTP server: ntpd. > Starting ClamAV daemon: clamd LibClamAV Warning: > ************************************************** > LibClamAV Warning: *** The virus database is older than 7 days! *** > LibClamAV Warning: *** Please update it as soon as possible. *** > LibClamAV Warning: ************************************************** > LibClamAV Warning: *********************************************************** > LibClamAV Warning: *** This version of the ClamAV engine is outdated. *** > LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq *** > LibClamAV Warning: *********************************************************** > . > Starting virtual private network daemon:. > Starting ClamAV virus database updater: freshclam. > Starting periodic command scheduler: cron. > Starting the system activity data collector: sadc. > [ 51.248126] sshd (1438): /proc/1438/oom_adj is deprecated, please use > /proc/1438/oom_score_adj instead. > Starting OpenBSD Secure Shell server: sshd. > Starting postfix greylisting daemon: postgrey. > Starting PostgreSQL 8.4 database server: main. > Starting Slony-I daemon:. > Starting Postfix Mail Transport Agent: postfix. > Starting Munin-Node: done. > > Debian GNU/Linux 6.0 efferax hvc0 > > efferax login: > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) > (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1 > [ 0.000000] Command line: root=/dev/xvda1 ro iommu=soft > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] Released 0 pages of unused memory > [ 0.000000] Set 0 page(s) to 1-1 mapping > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000400800000 (usable) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI not present or invalid. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x400800 max_arch_pfn = 0x400000000 > [ 0.000000] last_pfn = 0x100000 max_arch_pfn = 0x400000000 > [ 0.000000] initial memory mapped : 0 - 0392e000 > [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480 > [ 0.000000] init_memory_mapping: 0000000000000000-0000000100000000 > [ 0.000000] 0000000000 - 0100000000 page 4k > [ 0.000000] kernel direct mapping tables up to 100000000 @ 7fb000-1000000 > [ 0.000000] xen: setting RW the range fda000 - 1000000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000400800000 > [ 0.000000] 0100000000 - 0400800000 page 4k > [ 0.000000] kernel direct mapping tables up to 400800000 @ > 7e7ee000-80000000 > [ 0.000000] xen: setting RW the range 7ffff000 - 80000000 > [ 0.000000] RAMDISK: 0193d000 - 0392e000 > [ 0.000000] NUMA turned off > [ 0.000000] Faking a node at 0000000000000000-0000000400800000 > [ 0.000000] Initmem setup node 0 0000000000000000-0000000400800000 > [ 0.000000] NODE_DATA [000000007e7e9000 - 000000007e7edfff] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00400800 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x000000a0 > [ 0.000000] 0: 0x00000100 -> 0x00400800 > [ 0.000000] On node 0 totalpages: 4196240 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 2020 pages reserved > [ 0.000000] DMA zone: 1908 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 1030200 pages, LIFO batch:31 > [ 0.000000] Normal zone: 43036 pages used for memmap > [ 0.000000] Normal zone: 3104740 pages, LIFO batch:31 > [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] No local APIC present > [ 0.000000] APIC: disable apic facility > [ 0.000000] APIC: switched to apic NOOP > [ 0.000000] nr_irqs_gsi: 16 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 0000000000100000 > [ 0.000000] PCI: Warning: Cannot find a gap in the 32bit address range > [ 0.000000] PCI: Unassigned devices with 32bit resource registers may > break! > [ 0.000000] Allocating PCI resources starting at 400900000 (gap: > 400900000:400000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.1.4 (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007e400000 s82944 r8192 > d23552 u524288 > [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 4136848 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: root=/dev/xvda1 ro iommu=soft > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Placing 64MB software IO TLB between ffff880069c00000 - > ffff88006dc00000 > [ 0.000000] software IO TLB at phys 0x69c00000 - 0x6dc00000 > [ 0.000000] Memory: 1720324k/16785408k available (3425k kernel code, 448k > absent, 15064636k reserved, 3314k data, 576k init) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] NR_IRQS:33024 nr_irqs:304 16 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 2400.188 MHz processor. > [ 0.000000] Marking TSC unstable due to TSCs unsynchronized > [ 0.004000] Calibrating delay loop (skipped), value calculated using timer > frequency.. 4800.37 BogoMIPS (lpj=9600752) > [ 0.004000] pid_max: default: 32768 minimum: 301 > [ 0.004000] Security Framework initialized > [ 0.004000] AppArmor: AppArmor disabled by boot time parameter > [ 0.006262] Dentry cache hash table entries: 2097152 (order: 12, 16777216 > bytes) > [ 0.020001] Inode-cache hash table entries: 1048576 (order: 11, 8388608 > bytes) > [ 0.025607] Mount-cache hash table entries: 256 > [ 0.025813] Initializing cgroup subsys cpuacct > [ 0.025826] Initializing cgroup subsys memory > [ 0.025850] Initializing cgroup subsys devices > [ 0.025857] Initializing cgroup subsys freezer > [ 0.025863] Initializing cgroup subsys net_cls > [ 0.025869] Initializing cgroup subsys blkio > [ 0.025883] Initializing cgroup subsys perf_event > [ 0.026029] tseg: 0000000000 > [ 0.026040] CPU: Physical Processor ID: 1 > [ 0.026046] CPU: Processor Core ID: 0 > [ 0.026077] SMP alternatives: switching to UP code > [ 0.043264] Performance Events: > [ 0.043273] no APIC, boot with the "lapic" boot parameter to force-enable > it. > [ 0.043281] no hardware sampling interrupt available. > [ 0.043303] Broken PMU hardware detected, using software events only. > [ 0.043537] NMI watchdog disabled (cpu0): hardware events not enabled > [ 0.043732] installing Xen timer for CPU 1 > [ 0.043790] SMP alternatives: switching to SMP code > [ 0.060336] NMI watchdog disabled (cpu1): hardware events not enabled > [ 0.060525] installing Xen timer for CPU 2 > [ 0.060735] NMI watchdog disabled (cpu2): hardware events not enabled > [ 0.060908] installing Xen timer for CPU 3 > [ 0.061170] NMI watchdog disabled (cpu3): hardware events not enabled > [ 0.061207] Brought up 4 CPUs > [ 0.061373] devtmpfs: initialized > [ 0.066314] Grant table initialized > [ 0.066314] print_constraints: dummy: > [ 0.066314] NET: Registered protocol family 16 > [ 0.066314] PCI: setting up Xen PCI frontend stub > [ 0.066314] PCI: pci_cache_line_size set to 64 bytes > [ 0.068914] bio: create slab <bio-0> at 0 > [ 0.068914] ACPI: Interpreter disabled. > [ 0.068914] xen/balloon: Initialising balloon driver. > [ 0.172065] xen-balloon: Initialising balloon driver. > [ 0.173044] vgaarb: loaded > [ 0.173044] PCI: System does not support PCI > [ 0.173044] PCI: System does not support PCI > [ 0.173044] Switching to clocksource xen > [ 0.174395] pnp: PnP ACPI: disabled > [ 0.179072] PCI: max bus depth: 0 pci_try_num: 1 > [ 0.179206] NET: Registered protocol family 2 > [ 0.180947] IP route cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.187833] TCP established hash table entries: 524288 (order: 11, 8388608 > bytes) > [ 0.193673] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.194302] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.194315] TCP reno registered > [ 0.194439] UDP hash table entries: 8192 (order: 6, 262144 bytes) > [ 0.194721] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) > [ 0.195093] NET: Registered protocol family 1 > [ 0.195109] PCI: CLS 0 bytes, default 64 > [ 0.195181] Unpacking initramfs... > [ 0.265248] Freeing initrd memory: 32708k freed > [ 0.288426] platform rtc_cmos: registered platform RTC device (no PNP > device found) > [ 0.289021] audit: initializing netlink socket (disabled) > [ 0.289054] type=2000 audit(1377634607.461:1): initialized > [ 0.305251] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.305935] VFS: Disk quotas dquot_6.5.2 > [ 0.306016] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.306161] msgmni has been set to 3423 > [ 0.306592] alg: No test for stdrng (krng) > [ 0.306684] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 0.306700] io scheduler noop registered > [ 0.306705] io scheduler deadline registered > [ 0.306770] io scheduler cfq registered (default) > [ 0.306892] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.306930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.306938] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.307726] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.476269] Linux agpgart interface v0.103 > [ 0.476397] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 1.486246] i8042: No controller found > [ 1.486489] mousedev: PS/2 mouse device common for all mice > [ 1.526382] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 1.526467] rtc_cmos: probe of rtc_cmos failed with error -38 > [ 1.526786] TCP cubic registered > [ 1.526982] NET: Registered protocol family 10 > [ 1.527604] Mobile IPv6 > [ 1.527614] NET: Registered protocol family 17 > [ 1.527623] Registering the dns_resolver key type > [ 1.527960] PM: Hibernation image not present or could not be loaded. > [ 1.527989] registered taskstats version 1 > [ 1.528031] XENBUS: Device with no driver: device/vbd/51713 > [ 1.528038] XENBUS: Device with no driver: device/vbd/51714 > [ 1.528044] XENBUS: Device with no driver: device/vbd/51715 > [ 1.528050] XENBUS: Device with no driver: device/vbd/51729 > [ 1.528080] XENBUS: Device with no driver: device/vbd/51745 > [ 1.528087] XENBUS: Device with no driver: device/vbd/51761 > [ 1.528093] XENBUS: Device with no driver: device/vbd/51777 > [ 1.528099] XENBUS: Device with no driver: device/vif/0 > [ 1.528105] XENBUS: Device with no driver: device/pci/0 > [ 1.528121] /build/linux-s5x2oE/linux-3.2.46/drivers/rtc/hctosys.c: unable > to open rtc device (rtc0) > [ 1.528157] Initializing network drop monitor service > [ 1.528627] Freeing unused kernel memory: 576k freed > [ 1.528948] Write protecting the kernel read-only data: 6144k > [ 1.533486] Freeing unused kernel memory: 652k freed > [ 1.534419] Freeing unused kernel memory: 692k freed > [ 1.575804] udevd[60]: starting version 175 > [ 1.591209] input: PC Speaker as /devices/platform/pcspkr/input/input0 > [ 1.612023] Initialising Xen virtual ethernet driver. > [ 1.673559] blkfront: xvda1: barrier or flush: disabled > [ 1.679525] blkfront: xvda2: barrier or flush: disabled > [ 1.681532] Setting capacity to 62914560 > [ 1.685275] blkfront: xvda3: barrier or flush: disabled > [ 1.690960] blkfront: xvdb1: barrier or flush: disabled > [ 1.694827] blkfront: xvdc1: barrier or flush: disabled > [ 1.702850] blkfront: xvdd1: barrier or flush: disabled > [ 1.705665] Setting capacity to 4194304 > [ 1.706653] blkfront: xvde1: barrier or flush: disabled > [ 1.713448] Setting capacity to 587198464 > [ 1.713741] Setting capacity to 69197824 > [ 1.714187] Setting capacity to 446685184 > [ 1.714627] Setting capacity to 232775680 > [ 1.714642] xvdd1: detected capacity change from 0 to 119181148160 > [ 1.715104] Setting capacity to 1331683328 > [ 2.322690] SCSI subsystem initialized > [ 2.323661] SCSI Media Changer driver v0.25 > [ 2.364323] RPC: Registered named UNIX socket transport module. > [ 2.364341] RPC: Registered udp transport module. > [ 2.364346] RPC: Registered tcp transport module. > [ 2.364352] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 2.376933] Fusion MPT base driver 3.04.20 > [ 2.376950] Copyright (c) 1999-2008 LSI Corporation > [ 2.390208] Fusion MPT SPI Host driver 3.04.20 > [ 2.396782] FS-Cache: Loaded > [ 2.409835] FS-Cache: Netfs 'nfs' registered for caching > [ 2.424190] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > [ 2.453341] st: Version 20101219, fixed bufsize 32768, s/g segs 256 > [ 2.467341] device-mapper: uevent: version 1.0.3 > [ 2.467536] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > [ 2.683099] kjournald starting. Commit interval 5 seconds > [ 2.683129] EXT3-fs (xvda1): mounted filesystem with ordered data mode > [ 5.344134] udev[221]: starting version 164 > [ 5.866353] pcifront pci-0: Installing PCI frontend > [ 5.866651] pcifront pci-0: Creating PCI Frontend Bus 0000:09 > [ 5.867025] pci 0000:09:08.0: [1000:0030] type 0 class 0x000100 > [ 5.867283] pci 0000:09:08.0: reg 10: [io 0x5000-0x50ff] > [ 5.867449] pci 0000:09:08.0: reg 14: [mem 0xf9e00000-0xf9e1ffff 64bit] > [ 5.867618] pci 0000:09:08.0: reg 1c: [mem 0xf9e20000-0xf9e3ffff 64bit] > [ 5.868598] pci 0000:09:08.0: supports D1 D2 > [ 5.871583] pcifront pci-0: claiming resource 0000:09:08.0/0 > [ 5.871595] pcifront pci-0: claiming resource 0000:09:08.0/1 > [ 5.871603] pci 0000:09:08.0: address space collision: [mem > 0xf9e00000-0xf9e1ffff 64bit] conflicts with System RAM [mem > 0x00100000-0x4007fffff] > [ 5.871616] pcifront pci-0: Could not claim resource 0000:09:08.0/1! > Device offline. Try using e820_host=1 in the guest config. > [ 5.871626] pcifront pci-0: claiming resource 0000:09:08.0/3 > [ 5.871634] pci 0000:09:08.0: address space collision: [mem > 0xf9e20000-0xf9e3ffff 64bit] conflicts with System RAM [mem > 0x00100000-0x4007fffff] > [ 5.871646] pcifront pci-0: Could not claim resource 0000:09:08.0/3! > Device offline. Try using e820_host=1 in the guest config. > [ 5.872618] mptspi 0000:09:08.0: device not available (can't reserve [mem > 0xf9e00000-0xf9e1ffff 64bit]) > [ 5.872630] mptbase: ioc0: ERROR - pci_enable_device_mem() failed > [ 6.159193] powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2216 > (4 cpu cores) (version 2.20.00) > [ 6.159226] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects > found. > [ 6.159228] [Firmware Bug]: powernow-k8: Try again with latest BIOS. > [ 6.850939] Adding 2097148k swap on /dev/xvda2. Priority:-1 extents:1 > across:2097148k SS > [ 6.862659] Adding 34598908k swap on /dev/xvdb1. Priority:-2 extents:1 > across:34598908k SS > [ 7.508893] EXT3-fs (xvda1): using internal journal > [ 10.411287] kjournald starting. Commit interval 5 seconds > [ 10.411746] EXT3-fs (xvda3): using internal journal > [ 10.411766] EXT3-fs (xvda3): mounted filesystem with ordered data mode > [ 10.969165] kjournald starting. Commit interval 5 seconds > [ 10.969552] EXT3-fs (xvdd1): using internal journal > [ 10.969566] EXT3-fs (xvdd1): mounted filesystem with ordered data mode > [ 11.048772] kjournald starting. Commit interval 5 seconds > [ 11.049945] EXT3-fs (xvde1): using internal journal > [ 11.049960] EXT3-fs (xvde1): mounted filesystem with ordered data mode > [ 22.208282] svc: failed to register lockdv1 RPC service (errno 97). > [ 22.208411] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state > recovery directory > [ 22.246487] NFSD: starting 90-second grace period > [ 22.880072] eth0: no IPv6 routers present > [ 51.248126] sshd (1438): /proc/1438/oom_adj is deprecated, please use > /proc/1438/oom_score_adj instead. _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |