|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Regression with Xen 4.4 when booting with AMD IOMMU on TA890FXE BIOSTAR
Thursday, December 19, 2013, 7:25:20 PM, you wrote: > Hey, > With Xen 4.1, 4.2 and 4.3 it boots fine (albeit it complains about the > IOMMU a bit -see attached). With Xen 4.4 it blows up: > (the xen-syms is at http://darnok.org/xen/xen-syms.gz) > This is with commit a0070f7a5ad8652c74c685a0ee5f10215402279d > "x86/memshr: fix preemption in relinquish_shared_pages()" though > I hadn't run Xen 4.4 on this box before so the issue might have > happend much earlier. > > Also something is off with SRAT. > PXELINUX 3.82 2009-06-09 Copyright (C) 1994-2009 H. Peter Anvin et al > boot: > Loading xen.gz... ok > Loading vmlinuz... ok > Loading initramfs.cpio.gz... ok > Xen 4.4-unstable > (XEN) Xen version 4.4-unstable (konrad@(none)) (gcc (GCC) 4.4.4 20100503 (Red > Hat 4.4.4-2)) debug=y Thu Dec 1a0070f7-dirty > (XEN) Console output is synchronous. > (XEN) Bootloader: unknown > (XEN) Command line: sync_console iommu=verbose console=vga,com1 > com1=115200,8n1,0xD800,0 conring_size=2097152 loglvl=all guest_loglvl=all > dom0_mem_max=max:6GB,2G > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009b400 (usable) > (XEN) 000000000009b400 - 00000000000a0000 (reserved) > (XEN) 00000000000e2000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000cffb0000 (usable) > (XEN) 00000000cffb0000 - 00000000cffbe000 (ACPI data) > (XEN) 00000000cffbe000 - 00000000cffe0000 (ACPI NVS) > (XEN) 00000000cffe0000 - 00000000d0000000 (reserved) > (XEN) 00000000fff00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000230000000 (usable) > (XEN) ACPI: RSDP 000FB380, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT CFFB0100, 0064 (r1 071610 XSDT1756 20100716 MSFT 97) > (XEN) ACPI: FACP CFFB0290, 00F4 (r4 071610 FACP1756 20100716 MSFT 97) > (XEN) ACPI: DSDT CFFB0450, 4D0D (r2 89FAD 89FAD716 1 INTL 20051117) > (XEN) ACPI: FACS CFFBE000, 0040 > (XEN) ACPI: APIC CFFB0390, 007C (r2 071610 APIC1756 20100716 MSFT 97) > (XEN) ACPI: MCFG CFFB0410, 003C (r1 071610 OEMMCFG 20100716 MSFT 97) > (XEN) ACPI: OEMB CFFBE040, 0072 (r1 071610 OEMB1756 20100716 MSFT 97) > (XEN) ACPI: SRAT CFFBA450, 0108 (r3 AMD FAM_F_10 2 AMD 1) > (XEN) ACPI: HPET CFFBA560, 0038 (r1 071610 OEMHPET 20100716 MSFT 97) > (XEN) ACPI: IVRS CFFBA5A0, 00B8 (r1 AMD RD890S 202031 AMD 0) > (XEN) ACPI: SSDT CFFBA660, 0DA4 (r1 A M I POWERNOW 1 AMD 1) > (XEN) System RAM: 8191MB (8387884kB) (XEN) SRAT: PXM 0 ->> APIC 0 -> Node 0 (XEN) SRAT: PXM 0 ->> APIC 1 -> Node 0 (XEN) SRAT: PXM 0 ->> APIC 2 -> Node 0 > (XEN) SRAT:000000 > (XEN) NUMA: Allocated memnodemap from 229329000 - 22932c000 > (XEN) NUMA: Using 8 for the hash shift. > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[cffbe00c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) ERST table was not found > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) SMP: Allowing 6 CPUs (0 hotplug CPUs) > (XEN) IRQ limits: 24 GSI, 1144 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3000.222 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) P: base e0000000 segment 0000 buses 00 - ff > (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) Interrupt remapping enabled > (XEN) ENABLING IO-APIC IRQs > (1 > (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC > (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. works. > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 1048576 KiB. > (XEN) HVM: ASIDs enabled. > (XEN) SVM: Supported advanced features: > (XEN) - Nestesizes: 4kB, 2MB, 1GB > (XEN) HVM: PVH mode not supported on this platform > (XEN) microcode: CPU1 collect_cpu_info: patch_id=0x10000bf > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault add140, > flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = > 0xfdf8010140, flags = 0x8 > (XEN) microcode: CPU2 collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: CPU3 collect_cpu_info: patch_id=0x10000bf > (XEN) microcode: CPU4 collect_cpu_info: patch_id=0x10000bf > (XEN) Brought up 6 CPUs > (XEN) microcode: CPU5 collect_cpu_info: patch_id=0x10000bf > (XEN) Assertion 'get_rte_index(rte) == offset' failed at iommu_intr.c:188 > (XEN) ----[ Xen-4.4-unstable x86_64 debug=y Tainted: C ]---- > (XEN) CPU: 0 > (XEN) RIP: e008:[<ffff82d080153581>] > amd_iommu_ioapic_update_ire+0x44e/0x600 > (XEN) RFLAGS: 0000000000010002 CONTEXT: hypervisor > (XEN) rax: ffff8302292f2004 rbx: 0000000000000015 rcx: 0000000000000000 > (XEN) rdx: 0000000000000000 rsi: 0000000000000000 rdi: ffff82d0802f7e88 > (XEN) rbp: ffff82d0802cfd88 rsp: ffff82d0802cfca8 r8: ffff8302292ccf34 > (XEN) r9: 0000000000000000 r10: 000000000000000f r11: ffff82d080232320 > (XEN) r12: 0000000000000000 r13: 0000000000000014 r14: 0000000000000001 > (XEN) r15: ffff8302292cc380 cr0: 000000008005003b cr4: 00000000000006f0 > (XEN) cr3: 00000000cfc80000 cr2: 0000000000000000 > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 > (XEN) Xen stack trace from rsp=ffff82d0802cfca8: > (XEN) ffff82d0802cfcd8 01ff82d0802cfcc0 0000000000000046 0000001400000000 > (XEN) ffff82d080250700 ffff82d0802cfdb0 ffff82d08024c200 0000000000000200 > (XEN) 0000000000000001 ffff8302292e0070 0100000000000000 0000000100000002 > (XEN) ffff82d0802cfd48 0000000129320600 ffff830200000001 0000001529280000 > (XEN) 0000000000000000 0000000000205000 0100000000010000 ffff82d08016bad1 > (XEN) 0000000000010000 0000000000000000 0000000000000000 ffff830229277940 > (XEN) ffff82d08026fca4 0000000000000002 ffff82cffffff010 0000000000000000 > (XEN) ffff82d0802cfd98 ffff82d080144c21 ffff82d0802cfdf8 ffff82d080166908 > (XEN) ffff82d0802cfdb8 0000000000000292 ffff830229280000 0100000000000006 > (XEN) ffff83000006efb0 0000000000000002 ffff830229280000 0000000000000000 > (XEN) ffff82d08026cca0 0000000000000000 ffff82d0802cfe38 ffff82d080166ac6 > (XEN) ffff82d0802cfe18 0000000000000006 ffff83000006efb0 ffff83022931a7f0 > (XEN) ffff83000006eef0 ffff83022931a7f0 ffff82d0802cfe48 ffff82d0802a6827 > (XEN) ffff82d0802cff08 ffff82d0802a5fcf 0000000000000000 ffff82d08024bebe > (XEN) 0000000001281000 0000000000211d00 0000000000000000 ffff8300ffffffff > (XEN) ffff82d000000005 ffff83000006eef0 ffff83000006efb0 0000000000000005 > (XEN) ffff82d000000002 ffff830000000006 0000000800000000 000000010000006e > (XEN) 0000000000000003 00000000000002f8 0000000000000000 0000000000000000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > (XEN) 0000000000000000 ffff82d0801000b5 0000000000000000 0000000000000000 > (XEN) Xen call trace: > (XEN) [<ffff82d080153581>] amd_iommu_ioapic_update_ire+0x44e/0x600 > (XEN) [<ffff82d080144c21>] iommu_update_ire_from_apic+0x29/0x2b > (XEN) [<ffff82d080166908>] set_ioapic_affinity_irq+0xa5/0x1d6 > (XEN) [<ffff82d080166ac6>] setup_ioapic_dest+0x8d/0xc0 > (XEN) [<ffff82d0802a6827>] smp_cpus_done+0x51/0x61 > (XEN) [<ffff82d0802a5fcf>] __start_xen+0x2706/0x2a41 > (XEN) [<ffff82d0801000b5>] __high_start+0xa1/0xa3 > (XEN) > (XEN) > (XEN) **************************************** > (XEN) Panic on CPU 0: > (XEN) Assertion 'get_rte_index(rte) == offset' failed at iommu_intr.c:188 > (XEN) **************************************** > (XEN) > (XEN) Reboot in five seconds... Hmm do you have the latest bios ? I have another board but the same chipset (890fx), i think it's at least missing one IOAPIC for some reason ... i have got: (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs you: > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ENABLING IO-APIC IRQs > (1 > (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC > (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. works. perhaps a log from a boot with: "lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,amd-iommu-debug" would give some more data for Suravee/Jan. -- Sander _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |