|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH RFC 3/4] x86/AMD: support further feature masking MSRs
Newer AMD CPUs also allow masking CPUID leaf 6 ECX and CPUID leaf 7
sub-leaf 0 EAX and EBX.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
TBD:
- Fam15M0x is documented to not have MSR C0011002 despite CPUID[7,0].EBX != 0
from model 02
onwards, and contrary to what I see on the system I have access to (which is
model 02)
- Fam12, Fam14, and Fam16 are documented to not have MSR C0011003 despite
CPUID[6].ECX != 0
- Fam11 is documented to not even have MSR C0011004 and C0011005
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -331,24 +331,42 @@ Indicate where the responsibility for dr
### cpuid\_mask\_cpu (AMD only)
> `= fam_0f_rev_c | fam_0f_rev_d | fam_0f_rev_e | fam_0f_rev_f | fam_0f_rev_g
> | fam_10_rev_b | fam_10_rev_c | fam_11_rev_b`
-If the other **cpuid\_mask\_{,ext\_}e{c,d}x** options are fully set
-(unspecified on the command line), specify a pre-canned cpuid mask to
-mask the current processor down to appear as the specified processor.
-It is important to ensure that all hosts in a pool appear the same to
-guests to allow successful live migration.
+If the other **cpuid\_mask\_{,ext\_,thermal\_,l7s0\_}e{a,b,c,d}x**
+options are fully set (unspecified on the command line), specify a
+pre-canned cpuid mask to mask the current processor down to appear as
+the specified processor. It is important to ensure that all hosts in a
+pool appear the same to guests to allow successful live migration.
-### cpuid\_mask\_ ecx,edx,ext\_ecx,ext\_edx,xsave_eax
+### cpuid\_mask\_{{,ext\_}ecx,edx}
> `= <integer>`
> Default: `~0` (all bits set)
-These five command line parameters are used to specify cpuid masks to
+These four command line parameters are used to specify cpuid masks to
help with cpuid levelling across a pool of hosts. Setting a bit in
the mask indicates that the feature should be enabled, while clearing
a bit in the mask indicates that the feature should be disabled. It
is important to ensure that all hosts in a pool appear the same to
guests to allow successful live migration.
+### cpuid\_mask\_xsave\_eax (Intel only)
+> `= <integer>`
+
+> Default: `~0` (all bits set)
+
+This command line parameter is also used to specify a cpuid mask to
+help with cpuid levelling across a pool of hosts. See the description
+of the other respective options above.
+
+### cpuid\_mask\_{l7s0\_{eax,ebx},thermal\_ecx} (AMD only)
+> `= <integer>`
+
+> Default: `~0` (all bits set)
+
+These three command line parameters are also used to specify cpuid
+masks to help with cpuid levelling across a pool of hosts. See the
+description of the other respective options above.
+
### cpuidle
> `= <boolean>`
--- a/xen/arch/x86/cpu/amd.c
+++ b/xen/arch/x86/cpu/amd.c
@@ -30,9 +30,17 @@
* "fam_10_rev_c"
* "fam_11_rev_b"
*/
-static char opt_famrev[14];
+static char __initdata opt_famrev[14];
string_param("cpuid_mask_cpu", opt_famrev);
+static unsigned int __initdata opt_cpuid_mask_l7s0_eax = ~0u;
+integer_param("cpuid_mask_l7s0_eax", opt_cpuid_mask_l7s0_eax);
+static unsigned int __initdata opt_cpuid_mask_l7s0_ebx = ~0u;
+integer_param("cpuid_mask_l7s0_ebx", opt_cpuid_mask_l7s0_ebx);
+
+static unsigned int __initdata opt_cpuid_mask_thermal_ecx = ~0u;
+integer_param("cpuid_mask_thermal_ecx", opt_cpuid_mask_thermal_ecx);
+
/* 1 = allow, 0 = don't allow guest creation, -1 = don't allow boot */
s8 __read_mostly opt_allow_unsafe;
boolean_param("allow_unsafe", opt_allow_unsafe);
@@ -96,7 +104,11 @@ static void __devinit set_cpuidmask(cons
{
static unsigned int feat_ecx, feat_edx;
static unsigned int extfeat_ecx, extfeat_edx;
+ static unsigned int l7s0_eax, l7s0_ebx;
+ static unsigned int thermal_ecx;
+ static bool_t skip_l7s0_eax_ebx, skip_thermal_ecx;
static enum { not_parsed, no_mask, set_mask } status;
+ unsigned int eax, ebx, ecx, edx;
if (status == no_mask)
return;
@@ -104,15 +116,20 @@ static void __devinit set_cpuidmask(cons
if (status == set_mask)
goto setmask;
- ASSERT((status == not_parsed) && (smp_processor_id() == 0));
+ ASSERT((status == not_parsed) && (c == &boot_cpu_data));
status = no_mask;
if (~(opt_cpuid_mask_ecx & opt_cpuid_mask_edx &
- opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx)) {
+ opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx &
+ opt_cpuid_mask_l7s0_eax & opt_cpuid_mask_l7s0_ebx &
+ opt_cpuid_mask_thermal_ecx)) {
feat_ecx = opt_cpuid_mask_ecx;
feat_edx = opt_cpuid_mask_edx;
extfeat_ecx = opt_cpuid_mask_ext_ecx;
extfeat_edx = opt_cpuid_mask_ext_edx;
+ l7s0_eax = opt_cpuid_mask_l7s0_eax;
+ l7s0_ebx = opt_cpuid_mask_l7s0_ebx;
+ thermal_ecx = opt_cpuid_mask_thermal_ecx;
} else if (*opt_famrev == '\0') {
return;
} else if (!strcmp(opt_famrev, "fam_0f_rev_c")) {
@@ -175,12 +192,39 @@ static void __devinit set_cpuidmask(cons
printk("Writing CPUID extended feature mask ECX:EDX -> %08Xh:%08Xh\n",
extfeat_ecx, extfeat_edx);
+ if (c->cpuid_level >= 7)
+ cpuid_count(7, 0, &eax, &ebx, &ecx, &edx);
+ else
+ ebx = eax = 0;
+ if ((eax | ebx) && ~(l7s0_eax & l7s0_ebx)) {
+ if (l7s0_eax > eax)
+ l7s0_eax = eax;
+ l7s0_ebx &= ebx;
+ printk("Writing CPUID leaf 7 subleaf 0 feature mask EAX:EBX ->
%08Xh:%08Xh\n",
+ l7s0_eax, l7s0_ebx);
+ } else
+ skip_l7s0_eax_ebx = 1;
+
+ ecx = c->cpuid_level >= 6 ? cpuid_ecx(6) : 0;
+ if (ecx && ~thermal_ecx) {
+ thermal_ecx &= ecx;
+ printk("Writing CPUID thermal/power feature mask ECX ->
%08Xh\n",
+ thermal_ecx);
+ } else
+ skip_thermal_ecx = 1;
+
setmask:
/* FIXME check if processor supports CPUID masking */
/* AMD processors prior to family 10h required a 32-bit password */
if (c->x86 >= 0x10) {
wrmsr(MSR_K8_FEATURE_MASK, feat_edx, feat_ecx);
wrmsr(MSR_K8_EXT_FEATURE_MASK, extfeat_edx, extfeat_ecx);
+ if (!skip_l7s0_eax_ebx)
+ wrmsr(MSR_AMD_L7S0_FEATURE_MASK, l7s0_ebx, l7s0_eax);
+ if (!skip_thermal_ecx) {
+ rdmsr(MSR_AMD_THRM_FEATURE_MASK, eax, edx);
+ wrmsr(MSR_AMD_THRM_FEATURE_MASK, thermal_ecx, edx);
+ }
} else {
wrmsr_amd(MSR_K8_FEATURE_MASK, feat_edx, feat_ecx);
wrmsr_amd(MSR_K8_EXT_FEATURE_MASK, extfeat_edx, extfeat_ecx);
--- a/xen/include/asm-x86/msr-index.h
+++ b/xen/include/asm-x86/msr-index.h
@@ -192,6 +192,8 @@
#define MSR_AMD_FAM15H_EVNTSEL5 0xc001020a
#define MSR_AMD_FAM15H_PERFCTR5 0xc001020b
+#define MSR_AMD_L7S0_FEATURE_MASK 0xc0011002
+#define MSR_AMD_THRM_FEATURE_MASK 0xc0011003
#define MSR_K8_FEATURE_MASK 0xc0011004
#define MSR_K8_EXT_FEATURE_MASK 0xc0011005
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |