Re: [Xen-devel] [RFC PATCH] arm64: make bitops 32-bit tolerant

[Vladimir Murzin <murzin.v@xxxxxxxxx>]

On Mon, Apr 28, 2014 at 9:45 AM, Will Deacon <will.deacon@xxxxxxx> wrote:
> On Sun, Apr 27, 2014 at 10:21:17AM +0100, Vladimir Murzin wrote:
>> Xen assumes that bit operations are able to operate on 32-bit size and
>> alignment [1]. For arm64 bitops are based on atomic exclusive load/store
>> instructions to guarantee that changes are made atomically. However, these
>> instructions require that address to be aligned to the data size. Because, by
>> default, bitops operates on 64-bit size it implies that address should be
>> aligned appropriately. All these lead to breakage of Xen assumption for 
>> bitops
>> properties.
>>
>> This patch turns bitops to operate on 32-bit size/alignment.
>
> Please stop sending this patch. I have _absolutely_ _no_ intention of
> butchering our bitops in this way, and I don't think the Xen guys require
> changing the core bitops like this either (certainly, Ian's last reply to
> you suggested you should be doing this another way).
>
> NAK.
>
> Will
>

Hi Will

Thanks for making your point clear!

Vladimir

>> [1] http://www.gossamer-threads.com/lists/xen/devel/325613
>>
>> Cc: catalin.marinas@xxxxxxx
>> Cc: will.deacon@xxxxxxx
>> Cc: david.vrabel@xxxxxxxxxx
>> Cc: Ian.Campbell@xxxxxxxxxx
>>
>> Signed-off-by: Vladimir Murzin <murzin.v@xxxxxxxxx>
>> ---
>>  With this patch applied I was able to boot both Dom0 and DomU.
>>
>>  @Pranav: Could I have your Tested-by on this patch?
>>
>>  arch/arm64/lib/bitops.S          | 16 ++++++++--------
>>  1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm64/lib/bitops.S b/arch/arm64/lib/bitops.S
>> index 7dac371..a6acfff 100644
>> --- a/arch/arm64/lib/bitops.S
>> +++ b/arch/arm64/lib/bitops.S
>> @@ -26,14 +26,14 @@
>>   */
>>       .macro  bitop, name, instr
>>  ENTRY(       \name   )
>> -     and     w3, w0, #63             // Get bit offset
>> +     and     w3, w0, #31             // Get bit offset
>>       eor     w0, w0, w3              // Clear low bits
>>       mov     x2, #1
>>       add     x1, x1, x0, lsr #3      // Get word offset
>>       lsl     x3, x2, x3              // Create mask
>> -1:   ldxr    x2, [x1]
>> -     \instr  x2, x2, x3
>> -     stxr    w0, x2, [x1]
>> +1:   ldxr    w2, [x1]
>> +     \instr  w2, w2, w3
>> +     stxr    w0, w2, [x1]
>>       cbnz    w0, 1b
>>       ret
>>  ENDPROC(\name        )
>> @@ -41,15 +41,15 @@ ENDPROC(\name     )
>>
>>       .macro  testop, name, instr
>>  ENTRY(       \name   )
>> -     and     w3, w0, #63             // Get bit offset
>> +     and     w3, w0, #31             // Get bit offset
>>       eor     w0, w0, w3              // Clear low bits
>>       mov     x2, #1
>>       add     x1, x1, x0, lsr #3      // Get word offset
>>       lsl     x4, x2, x3              // Create mask
>> -1:   ldxr    x2, [x1]
>> +1:   ldxr    w2, [x1]
>>       lsr     x0, x2, x3              // Save old value of bit
>> -     \instr  x2, x2, x4              // toggle bit
>> -     stlxr   w5, x2, [x1]
>> +     \instr  w2, w2, w4              // toggle bit
>> +     stlxr   w5, w2, [x1]
>>       cbnz    w5, 1b
>>       dmb     ish
>>       and     x0, x0, #1
>> --
>> 1.8.3.2
>>
>>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel