|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3] Hvmloader: Modify ACPI to only supply _EJ0 methods for PCIslots that support hotplug by runtime patching
On Sun, May 04, 2014 at 05:25:15PM +0800, arei.gonglei@xxxxxxxxxx wrote:
> From: Gaowei <gao.gaowei@xxxxxxxxxx>
>
> In Xen platform, after using upstream qemu, the all of pci devices will show
> hotplug in the windows guest. In this situation, the windows guest may occur
> blue screen when VM' user click the icon of VGA card for trying unplug VGA
> card.
> However, we don't hope VM's user can do such dangerous operation, and showing
> all pci devices inside the guest OS is unfriendly.
>
> This is done by runtime patching:
> - Rename _EJ0 methods for PCI slots in DSDT to EJ0_:note that this has the
> same checksum, but is ignored by OSPM.
> - At compile time, look for these methods in ASL source,find the matching
> AML,
> and store the offsets of these methods in a table named aml_ej0_data.
> - At run time, go over aml_ej0_data, check which slots not support hotplug
> and
> patch the ACPI table, replacing _EJ0 with EJ0_.
How does this work with traditional QEMU ? Is this only when running with
SeaBIOS and
upstream QEMU?
>
> Signed-off-by: Gaowei <gao.gaowei@xxxxxxxxxx>
> Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx>
> ---
> v3->v2:
> reformat on the latest master
> v2->v1:
> rework by Jan Beulich's suggestion:
> - adjust the code style
>
> tools/firmware/hvmloader/acpi/Makefile | 44 ++-
> tools/firmware/hvmloader/acpi/acpi2_0.h | 4 +
> tools/firmware/hvmloader/acpi/build.c | 22 ++
> tools/firmware/hvmloader/acpi/dsdt.asl | 1 +
> tools/firmware/hvmloader/acpi/mk_dsdt.c | 2 +
> tools/firmware/hvmloader/ovmf.c | 6 +-
> tools/firmware/hvmloader/rombios.c | 4 +
> tools/firmware/hvmloader/seabios.c | 8 +
> tools/firmware/hvmloader/tools/acpi_extract.py | 308
> +++++++++++++++++++++
> .../hvmloader/tools/acpi_extract_preprocess.py | 41 +++
> 10 files changed, 428 insertions(+), 12 deletions(-)
> create mode 100644 tools/firmware/hvmloader/tools/acpi_extract.py
> create mode 100644 tools/firmware/hvmloader/tools/acpi_extract_preprocess.py
>
> diff --git a/tools/firmware/hvmloader/acpi/Makefile
> b/tools/firmware/hvmloader/acpi/Makefile
> index 2c50851..f79ecc3 100644
> --- a/tools/firmware/hvmloader/acpi/Makefile
> +++ b/tools/firmware/hvmloader/acpi/Makefile
> @@ -24,30 +24,46 @@ OBJS = $(patsubst %.c,%.o,$(C_SRC))
> CFLAGS += $(CFLAGS_xeninclude)
>
> vpath iasl $(PATH)
> +vpath python $(PATH)
> +
> +.DELETE_ON_ERROR:$(filter dsdt_%.c,$(C_SRC))
> +
> all: acpi.a
>
> ssdt_s3.h ssdt_s4.h ssdt_pm.h ssdt_tpm.h: %.h: %.asl iasl
> iasl -vs -p $* -tc $<
> - sed -e 's/AmlCode/$*/g' $*.hex >$@
> + sed -e 's/AmlCode/$*/g' $*.hex >$@.tmp
> + $(call move-if-changed,$@.tmp $@)
> rm -f $*.hex $*.aml
>
> mk_dsdt: mk_dsdt.c
> $(HOSTCC) $(HOSTCFLAGS) $(CFLAGS_xeninclude) -o $@ mk_dsdt.c
>
> dsdt_anycpu_qemu_xen.asl: dsdt.asl mk_dsdt
> - awk 'NR > 1 {print s} {s=$$0}' $< > $@
> - ./mk_dsdt --dm-version qemu-xen >> $@
> + awk 'NR > 1 {print s} {s=$$0}' $< > $@.tmp
> + sed -i 's/AmlCode/dsdt_anycpu_qemu_xen/g' $@.tmp
> + ./mk_dsdt --dm-version qemu-xen >> $@.tmp
> + sed -i 's/aml_ej0_name/dsdt_anycpu_qemu_xen_aml_ej0_name/g' $@.tmp
> + sed -i 's/aml_adr_dword/dsdt_anycpu_qemu_xen_aml_adr_dword/g' $@.tmp
> + $(call move-if-changed,$@.tmp $@)
>
> # NB. awk invocation is a portable alternative to 'head -n -1'
> dsdt_%cpu.asl: dsdt.asl mk_dsdt
> - awk 'NR > 1 {print s} {s=$$0}' $< > $@
> - ./mk_dsdt --maxcpu $* >> $@
> + awk 'NR > 1 {print s} {s=$$0}' $< > $@.tmp
> + sed -i 's/AmlCode/dsdt_$*cpu/g' $@.tmp
> + ./mk_dsdt --maxcpu $* >> $@.tmp
> + $(call move-if-changed,$@.tmp $@)
>
> -$(filter dsdt_%.c,$(C_SRC)): %.c: iasl %.asl
> - iasl -vs -p $* -tc $*.asl
> - sed -e 's/AmlCode/$*/g' $*.hex >$@
> - echo "int $*_len=sizeof($*);" >>$@
> - rm -f $*.aml $*.hex
> +$(filter dsdt_%.c,$(C_SRC)): %.c: iasl python %.asl
> + cpp -P $*.asl > $*.asl.i.orig
> + python ../tools/acpi_extract_preprocess.py $*.asl.i.orig > $*.asl.i
> + iasl -vs -l -tc -p $* $*.asl.i
> + python ../tools/acpi_extract.py $*.lst > $@.tmp
> + echo "int $*_len=sizeof($*);" >>$@.tmp
> + if grep -q "$*_aml_ej0_name" $@.tmp; then echo "int
> $*_aml_ej0_name_len=sizeof($*_aml_ej0_name);" >>$@.tmp; fi
> + if grep -q "$*_aml_adr_dword" $@.tmp; then echo "int
> $*_aml_adr_dword_len=sizeof($*_aml_adr_dword);" >>$@.tmp;fi
> + $(call move-if-changed,$@.tmp $@)
> + rm -f $*.aml $*.hex $*.asl.i.orig $*.asl.i $*.lst
>
> iasl:
> @echo
> @@ -57,6 +73,12 @@ iasl:
> @echo
> @exit 1
>
> +python:
> + @echo
> + @echo "python is needed"
> + @echo
> + @exit 1
> +
> build.o: ssdt_s3.h ssdt_s4.h ssdt_pm.h ssdt_tpm.h
>
> acpi.a: $(OBJS)
> @@ -64,7 +86,7 @@ acpi.a: $(OBJS)
>
> clean:
> rm -rf *.a *.o $(IASL_VER) $(IASL_VER).tar.gz $(DEPS)
> - rm -rf ssdt_*.h dsdt*.c *~ *.aml *.hex mk_dsdt dsdt_*.asl
> + rm -rf ssdt_*.h dsdt*.c *~ *.aml *.hex mk_dsdt dsdt_*.asl *.asl.i
> *.asl.i.orig *.lst *.tmp
>
> install: all
>
> diff --git a/tools/firmware/hvmloader/acpi/acpi2_0.h
> b/tools/firmware/hvmloader/acpi/acpi2_0.h
> index 7b22d80..4ba3957 100644
> --- a/tools/firmware/hvmloader/acpi/acpi2_0.h
> +++ b/tools/firmware/hvmloader/acpi/acpi2_0.h
> @@ -396,6 +396,10 @@ struct acpi_config {
> int dsdt_anycpu_len;
> unsigned char *dsdt_15cpu;
> int dsdt_15cpu_len;
> + unsigned short *aml_ej0_name;
> + unsigned short *aml_adr_dword;
> + int aml_ej0_name_len;
> + int aml_adr_dword_len;
> };
>
> void acpi_build_tables(struct acpi_config *config, unsigned int physical);
> diff --git a/tools/firmware/hvmloader/acpi/build.c
> b/tools/firmware/hvmloader/acpi/build.c
> index f1dd3f0..ccce420 100644
> --- a/tools/firmware/hvmloader/acpi/build.c
> +++ b/tools/firmware/hvmloader/acpi/build.c
> @@ -30,6 +30,8 @@
> #define align16(sz) (((sz) + 15) & ~15)
> #define fixed_strcpy(d, s) strncpy((d), (s), sizeof(d))
>
> +#define PCI_RMV_BASE 0xae0c
> +
> extern struct acpi_20_rsdp Rsdp;
> extern struct acpi_20_rsdt Rsdt;
> extern struct acpi_20_xsdt Xsdt;
> @@ -404,6 +406,8 @@ void acpi_build_tables(struct acpi_config *config,
> unsigned int physical)
> unsigned char *dsdt;
> unsigned long secondary_tables[ACPI_MAX_SECONDARY_TABLES];
> int nr_secondaries, i;
> + unsigned int rmvc_pcrm = 0;
> + unsigned int len_aml_addr = 0, len_aml_ej0 = 0;
>
> /* Allocate and initialise the acpi info area. */
> mem_hole_populate_ram(ACPI_INFO_PHYSICAL_ADDRESS >> PAGE_SHIFT, 1);
> @@ -440,6 +444,24 @@ void acpi_build_tables(struct acpi_config *config,
> unsigned int physical)
> memcpy(dsdt, config->dsdt_anycpu, config->dsdt_anycpu_len);
> nr_processor_objects = HVM_MAX_VCPUS;
> }
> + len_aml_addr =
> config->aml_adr_dword_len/sizeof(config->aml_adr_dword[0]);
> + len_aml_ej0 = config->aml_ej0_name_len/sizeof(config->aml_ej0_name[0]);
> + if (config->aml_adr_dword_len && config->aml_ej0_name_len &&
> (len_aml_addr == len_aml_ej0))
> + {
> + rmvc_pcrm = inl(PCI_RMV_BASE);
So .. what is at this special 0xae0c address?
Is there some code in QEMU that needs this treatment as well?
> + printf("rmvc_pcrm is %x\n", rmvc_pcrm);
> + for (i = 0; i < len_aml_addr; i++ ) {
> + /* Slot is in byte 2 in _ADR */
> + unsigned char slot = dsdt[config->aml_adr_dword[i] + 2] & 0x1F;
> + /* Sanity check */
> + if (memcmp(dsdt + config->aml_ej0_name[i], "_EJ0", 4)) {
> + goto oom;
> + }
> + if (!(rmvc_pcrm & (0x1 << slot))) {
> + memcpy(dsdt + config->aml_ej0_name[i], "EJ0_", 4);
> + }
> + }
> + }
>
> /*
> * N.B. ACPI 1.0 operating systems may not handle FADT with revision 2
> diff --git a/tools/firmware/hvmloader/acpi/dsdt.asl
> b/tools/firmware/hvmloader/acpi/dsdt.asl
> index 247a8ad..1e7695b 100644
> --- a/tools/firmware/hvmloader/acpi/dsdt.asl
> +++ b/tools/firmware/hvmloader/acpi/dsdt.asl
> @@ -16,6 +16,7 @@
> * this program; if not, write to the Free Software Foundation, Inc., 59
> Temple
> * Place - Suite 330, Boston, MA 02111-1307 USA.
> */
> +ACPI_EXTRACT_ALL_CODE AmlCode
>
> DefinitionBlock ("DSDT.aml", "DSDT", 2, "Xen", "HVM", 0)
> {
> diff --git a/tools/firmware/hvmloader/acpi/mk_dsdt.c
> b/tools/firmware/hvmloader/acpi/mk_dsdt.c
> index a4b693b..555e062 100644
> --- a/tools/firmware/hvmloader/acpi/mk_dsdt.c
> +++ b/tools/firmware/hvmloader/acpi/mk_dsdt.c
> @@ -372,7 +372,9 @@ int main(int argc, char **argv)
> /* hotplug_slot */
> for (slot = 1; slot <= 31; slot++) {
> push_block("Device", "S%i", slot); {
> + printf("ACPI_EXTRACT_NAME_DWORD_CONST aml_adr_dword\n");
> stmt("Name", "_ADR, %#06x0000", slot);
> + printf("ACPI_EXTRACT_METHOD_STRING aml_ej0_name\n");
> push_block("Method", "_EJ0,1"); {
> stmt("Store", "ShiftLeft(1, %#06x), B0EJ", slot);
> stmt("Return", "0x0");
> diff --git a/tools/firmware/hvmloader/ovmf.c b/tools/firmware/hvmloader/ovmf.c
> index 28dd7bc..ea11564 100644
> --- a/tools/firmware/hvmloader/ovmf.c
> +++ b/tools/firmware/hvmloader/ovmf.c
> @@ -123,7 +123,11 @@ static void ovmf_acpi_build_tables(void)
> .dsdt_anycpu = dsdt_anycpu,
> .dsdt_anycpu_len = dsdt_anycpu_len,
> .dsdt_15cpu = NULL,
> - .dsdt_15cpu_len = 0
> + .dsdt_15cpu_len = 0,
> + .aml_ej0_name = NULL,
> + .aml_adr_dword = NULL,
> + .aml_ej0_name_len = 0,
> + .aml_adr_dword_len = 0,
> };
>
> acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS);
> diff --git a/tools/firmware/hvmloader/rombios.c
> b/tools/firmware/hvmloader/rombios.c
> index 810bd24..803c9fa 100644
> --- a/tools/firmware/hvmloader/rombios.c
> +++ b/tools/firmware/hvmloader/rombios.c
> @@ -179,6 +179,10 @@ static void rombios_acpi_build_tables(void)
> .dsdt_anycpu_len = dsdt_anycpu_len,
> .dsdt_15cpu = dsdt_15cpu,
> .dsdt_15cpu_len = dsdt_15cpu_len,
> + .aml_ej0_name = NULL,
> + .aml_adr_dword = NULL,
> + .aml_ej0_name_len = 0,
> + .aml_adr_dword_len = 0,
> };
>
> acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS);
> diff --git a/tools/firmware/hvmloader/seabios.c
> b/tools/firmware/hvmloader/seabios.c
> index dd7dfbe..ca01d27 100644
> --- a/tools/firmware/hvmloader/seabios.c
> +++ b/tools/firmware/hvmloader/seabios.c
> @@ -33,6 +33,10 @@
>
> extern unsigned char dsdt_anycpu_qemu_xen[];
> extern int dsdt_anycpu_qemu_xen_len;
> +extern unsigned short dsdt_anycpu_qemu_xen_aml_ej0_name[];
> +extern unsigned short dsdt_anycpu_qemu_xen_aml_adr_dword[];
> +extern int dsdt_anycpu_qemu_xen_aml_ej0_name_len;
> +extern int dsdt_anycpu_qemu_xen_aml_adr_dword_len;
>
> struct seabios_info {
> char signature[14]; /* XenHVMSeaBIOS\0 */
> @@ -99,6 +103,10 @@ static void seabios_acpi_build_tables(void)
> .dsdt_anycpu_len = dsdt_anycpu_qemu_xen_len,
> .dsdt_15cpu = NULL,
> .dsdt_15cpu_len = 0,
> + .aml_ej0_name = dsdt_anycpu_qemu_xen_aml_ej0_name,
> + .aml_adr_dword = dsdt_anycpu_qemu_xen_aml_adr_dword,
> + .aml_ej0_name_len = dsdt_anycpu_qemu_xen_aml_ej0_name_len,
> + .aml_adr_dword_len = dsdt_anycpu_qemu_xen_aml_adr_dword_len,
> };
>
> acpi_build_tables(&config, rsdp);
> diff --git a/tools/firmware/hvmloader/tools/acpi_extract.py
> b/tools/firmware/hvmloader/tools/acpi_extract.py
> new file mode 100644
> index 0000000..ccec089
> --- /dev/null
> +++ b/tools/firmware/hvmloader/tools/acpi_extract.py
> @@ -0,0 +1,308 @@
> +#!/usr/bin/python
> +# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@xxxxxxxxxx>
> +#
> +# This file may be distributed under the terms of the GNU GPLv3 license.
Well, Xen code is under GPLv2 so I don't think you can do this?
Unless Michael is willing to release it under a different licence?
> +
> +# Process mixed ASL/AML listing (.lst file) produced by iasl -l
> +# Locate and execute ACPI_EXTRACT directives, output offset info
> +#
> +# Documentation of ACPI_EXTRACT_* directive tags:
> +#
> +# These directive tags output offset information from AML for BIOS runtime
> +# table generation.
> +# Each directive is of the form:
> +# ACPI_EXTRACT_<TYPE> <array_name> <Operator> (...)
> +# and causes the extractor to create an array
> +# named <array_name> with offset, in the generated AML,
> +# of an object of a given type in the following <Operator>.
> +#
> +# A directive must fit on a single code line.
> +#
> +# Object type in AML is verified, a mismatch causes a build failure.
> +#
> +# Directives and operators currently supported are:
> +# ACPI_EXTRACT_NAME_DWORD_CONST - extract a Dword Const object from Name()
> +# ACPI_EXTRACT_NAME_WORD_CONST - extract a Word Const object from Name()
> +# ACPI_EXTRACT_NAME_BYTE_CONST - extract a Byte Const object from Name()
> +# ACPI_EXTRACT_METHOD_STRING - extract a NameString from Method()
> +# ACPI_EXTRACT_NAME_STRING - extract a NameString from Name()
> +# ACPI_EXTRACT_PROCESSOR_START - start of Processor() block
> +# ACPI_EXTRACT_PROCESSOR_STRING - extract a NameString from Processor()
> +# ACPI_EXTRACT_PROCESSOR_END - offset at last byte of Processor() + 1
> +# ACPI_EXTRACT_PKG_START - start of Package block
> +#
> +# ACPI_EXTRACT_ALL_CODE - create an array storing the generated AML bytecode
> +#
> +# ACPI_EXTRACT is not allowed anywhere else in code, except in comments.
> +
> +import re;
> +import sys;
> +import fileinput;
> +
> +aml = []
> +asl = []
> +output = {}
> +debug = ""
> +
> +class asl_line:
> + line = None
> + lineno = None
> + aml_offset = None
> +
> +def die(diag):
> + sys.stderr.write("Error: %s; %s\n" % (diag, debug))
> + sys.exit(1)
> +
> +#Store an ASL command, matching AML offset, and input line (for debugging)
> +def add_asl(lineno, line):
> + l = asl_line()
> + l.line = line
> + l.lineno = lineno
> + l.aml_offset = len(aml)
> + asl.append(l)
> +
> +#Store an AML byte sequence
> +#Verify that offset output by iasl matches # of bytes so far
> +def add_aml(offset, line):
> + o = int(offset, 16);
> + # Sanity check: offset must match size of code so far
> + if (o != len(aml)):
> + die("Offset 0x%x != 0x%x" % (o, len(aml)))
> + # Strip any trailing dots and ASCII dump after "
> + line = re.sub(r'\s*\.*\s*".*$',"", line)
> + # Strip traling whitespace
> + line = re.sub(r'\s+$',"", line)
> + # Strip leading whitespace
> + line = re.sub(r'^\s+',"", line)
> + # Split on whitespace
> + code = re.split(r'\s+', line)
> + for c in code:
> + # Require a legal hex number, two digits
> + if (not(re.search(r'^[0-9A-Fa-f][0-9A-Fa-f]$', c))):
> + die("Unexpected octet %s" % c);
> + aml.append(int(c, 16));
> +
> +# Process aml bytecode array, decoding AML
> +def aml_pkglen_bytes(offset):
> + # PkgLength can be multibyte. Bits 8-7 give the # of extra bytes.
> + pkglenbytes = aml[offset] >> 6;
> + return pkglenbytes + 1
> +
> +def aml_pkglen(offset):
> + pkgstart = offset
> + pkglenbytes = aml_pkglen_bytes(offset)
> + pkglen = aml[offset] & 0x3F
> + # If multibyte, first nibble only uses bits 0-3
> + if ((pkglenbytes > 0) and (pkglen & 0x30)):
> + die("PkgLen bytes 0x%x but first nibble 0x%x expected 0x0X" %
> + (pkglen, pkglen))
> + offset += 1
> + pkglenbytes -= 1
> + for i in range(pkglenbytes):
> + pkglen |= aml[offset + i] << (i * 8 + 4)
> + if (len(aml) < pkgstart + pkglen):
> + die("PckgLen 0x%x at offset 0x%x exceeds AML size 0x%x" %
> + (pkglen, offset, len(aml)))
> + return pkglen
> +
> +# Given method offset, find its NameString offset
> +def aml_method_string(offset):
> + #0x14 MethodOp PkgLength NameString MethodFlags TermList
> + if (aml[offset] != 0x14):
> + die( "Method offset 0x%x: expected 0x14 actual 0x%x" %
> + (offset, aml[offset]));
> + offset += 1;
> + pkglenbytes = aml_pkglen_bytes(offset)
> + offset += pkglenbytes;
> + return offset;
> +
> +# Given name offset, find its NameString offset
> +def aml_name_string(offset):
> + #0x08 NameOp NameString DataRef
> + if (aml[offset] != 0x08):
> + die( "Name offset 0x%x: expected 0x08 actual 0x%x" %
> + (offset, aml[offset]));
> + offset += 1
> + # Block Name Modifier. Skip it.
> + if (aml[offset] == 0x5c or aml[offset] == 0x5e):
> + offset += 1
> + return offset;
> +
> +# Given data offset, find dword const offset
> +def aml_data_dword_const(offset):
> + #0x08 NameOp NameString DataRef
> + if (aml[offset] != 0x0C):
> + die( "Name offset 0x%x: expected 0x0C actual 0x%x" %
> + (offset, aml[offset]));
> + return offset + 1;
> +
> +# Given data offset, find word const offset
> +def aml_data_word_const(offset):
> + #0x08 NameOp NameString DataRef
> + if (aml[offset] != 0x0B):
> + die( "Name offset 0x%x: expected 0x0B actual 0x%x" %
> + (offset, aml[offset]));
> + return offset + 1;
> +
> +# Given data offset, find byte const offset
> +def aml_data_byte_const(offset):
> + #0x08 NameOp NameString DataRef
> + if (aml[offset] != 0x0A):
> + die( "Name offset 0x%x: expected 0x0A actual 0x%x" %
> + (offset, aml[offset]));
> + return offset + 1;
> +
> +# Given name offset, find dword const offset
> +def aml_name_dword_const(offset):
> + return aml_data_dword_const(aml_name_string(offset) + 4)
> +
> +# Given name offset, find word const offset
> +def aml_name_word_const(offset):
> + return aml_data_word_const(aml_name_string(offset) + 4)
> +
> +# Given name offset, find byte const offset
> +def aml_name_byte_const(offset):
> + return aml_data_byte_const(aml_name_string(offset) + 4)
> +
> +def aml_processor_start(offset):
> + #0x5B 0x83 ProcessorOp PkgLength NameString ProcID
> + if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x83)):
> + die( "Name offset 0x%x: expected 0x5B 0x83 actual 0x%x 0x%x" %
> + (offset, aml[offset], aml[offset + 1]));
> + return offset
> +
> +def aml_processor_string(offset):
> + #0x5B 0x83 ProcessorOp PkgLength NameString ProcID
> + start = aml_processor_start(offset)
> + offset += 2
> + pkglenbytes = aml_pkglen_bytes(offset)
> + offset += pkglenbytes
> + return offset
> +
> +def aml_processor_end(offset):
> + start = aml_processor_start(offset)
> + offset += 2
> + pkglenbytes = aml_pkglen_bytes(offset)
> + pkglen = aml_pkglen(offset)
> + return offset + pkglen
> +
> +def aml_package_start(offset):
> + offset = aml_name_string(offset) + 4
> + # 0x12 PkgLength NumElements PackageElementList
> + if (aml[offset] != 0x12):
> + die( "Name offset 0x%x: expected 0x12 actual 0x%x" %
> + (offset, aml[offset]));
> + offset += 1
> + return offset + aml_pkglen_bytes(offset) + 1
> +
> +lineno = 0
> +for line in fileinput.input():
> + # Strip trailing newline
> + line = line.rstrip();
> + # line number and debug string to output in case of errors
> + lineno = lineno + 1
> + debug = "input line %d: %s" % (lineno, line)
> + #ASL listing: space, then line#, then ...., then code
> + pasl = re.compile('^\s+([0-9]+)\.\.\.\.\s*')
> + m = pasl.search(line)
> + if (m):
> + add_asl(lineno, pasl.sub("", line));
> + # AML listing: offset in hex, then ...., then code
> + paml = re.compile('^([0-9A-Fa-f]+)\.\.\.\.\s*')
> + m = paml.search(line)
> + if (m):
> + add_aml(m.group(1), paml.sub("", line))
> +
> +# Now go over code
> +# Track AML offset of a previous non-empty ASL command
> +prev_aml_offset = -1
> +for i in range(len(asl)):
> + debug = "input line %d: %s" % (asl[i].lineno, asl[i].line)
> +
> + l = asl[i].line
> +
> + # skip if not an extract directive
> + a = len(re.findall(r'ACPI_EXTRACT', l))
> + if (not a):
> + # If not empty, store AML offset. Will be used for sanity checks
> + # IASL seems to put {}. at random places in the listing.
> + # Ignore any non-words for the purpose of this test.
> + m = re.search(r'\w+', l)
> + if (m):
> + prev_aml_offset = asl[i].aml_offset
> + continue
> +
> + if (a > 1):
> + die("Expected at most one ACPI_EXTRACT per line, actual %d" % a)
> +
> + mext = re.search(r'''
> + ^\s* # leading whitespace
> + /\*\s* # start C comment
> + (ACPI_EXTRACT_\w+) # directive: group(1)
> + \s+ # whitspace separates directive from array name
> + (\w+) # array name: group(2)
> + \s*\*/ # end of C comment
> + \s*$ # trailing whitespace
> + ''', l, re.VERBOSE)
> + if (not mext):
> + die("Stray ACPI_EXTRACT in input")
> +
> + # previous command must have produced some AML,
> + # otherwise we are in a middle of a block
> + if (prev_aml_offset == asl[i].aml_offset):
> + die("ACPI_EXTRACT directive in the middle of a block")
> +
> + directive = mext.group(1)
> + array = mext.group(2)
> + offset = asl[i].aml_offset
> +
> + if (directive == "ACPI_EXTRACT_ALL_CODE"):
> + if array in output:
> + die("%s directive used more than once" % directive)
> + output[array] = aml
> + continue
> + if (directive == "ACPI_EXTRACT_NAME_DWORD_CONST"):
> + offset = aml_name_dword_const(offset)
> + elif (directive == "ACPI_EXTRACT_NAME_WORD_CONST"):
> + offset = aml_name_word_const(offset)
> + elif (directive == "ACPI_EXTRACT_NAME_BYTE_CONST"):
> + offset = aml_name_byte_const(offset)
> + elif (directive == "ACPI_EXTRACT_NAME_STRING"):
> + offset = aml_name_string(offset)
> + elif (directive == "ACPI_EXTRACT_METHOD_STRING"):
> + offset = aml_method_string(offset)
> + elif (directive == "ACPI_EXTRACT_PROCESSOR_START"):
> + offset = aml_processor_start(offset)
> + elif (directive == "ACPI_EXTRACT_PROCESSOR_STRING"):
> + offset = aml_processor_string(offset)
> + elif (directive == "ACPI_EXTRACT_PROCESSOR_END"):
> + offset = aml_processor_end(offset)
> + elif (directive == "ACPI_EXTRACT_PKG_START"):
> + offset = aml_package_start(offset)
> + else:
> + die("Unsupported directive %s" % directive)
> +
> + if array not in output:
> + output[array] = []
> + output[array].append(offset)
> +
> +debug = "at end of file"
> +
> +def get_value_type(maxvalue):
> + #Use type large enough to fit the table
> + if (maxvalue >= 0x10000):
> + return "int"
> + elif (maxvalue >= 0x100):
> + return "short"
> + else:
> + return "char"
> +
> +# Pretty print output
> +for array in output.keys():
> + otype = get_value_type(max(output[array]))
> + odata = []
> + for value in output[array]:
> + odata.append("0x%x" % value)
> + sys.stdout.write("unsigned %s %s[] = {\n" % (otype, array))
> + sys.stdout.write(",\n".join(odata))
> + sys.stdout.write('\n};\n');
> diff --git a/tools/firmware/hvmloader/tools/acpi_extract_preprocess.py
> b/tools/firmware/hvmloader/tools/acpi_extract_preprocess.py
> new file mode 100644
> index 0000000..4ae364e
> --- /dev/null
> +++ b/tools/firmware/hvmloader/tools/acpi_extract_preprocess.py
> @@ -0,0 +1,41 @@
> +#!/usr/bin/python
> +# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@xxxxxxxxxx>
> +#
> +# This file may be distributed under the terms of the GNU GPLv3 license.
> +
> +# Read a preprocessed ASL listing and put each ACPI_EXTRACT
> +# directive in a comment, to make iasl skip it.
> +# We also put each directive on a new line, the machinery
> +# in tools/acpi_extract.py requires this.
> +
> +import re;
> +import sys;
> +import fileinput;
> +
> +def die(diag):
> + sys.stderr.write("Error: %s\n" % (diag))
> + sys.exit(1)
> +
> +# Note: () around pattern make split return matched string as part of list
> +psplit = re.compile(r''' (
> + \b # At word boundary
> + ACPI_EXTRACT_\w+ # directive
> + \s+ # some whitespace
> + \w+ # array name
> + )''', re.VERBOSE);
> +
> +lineno = 0
> +for line in fileinput.input():
> + # line number and debug string to output in case of errors
> + lineno = lineno + 1
> + debug = "input line %d: %s" % (lineno, line.rstrip())
> +
> + s = psplit.split(line);
> + # The way split works, each odd item is the matching ACPI_EXTRACT
> directive.
> + # Put each in a comment, and on a line by itself.
> + for i in range(len(s)):
> + if (i % 2):
> + sys.stdout.write("\n/* %s */\n" % s[i])
> + else:
> + sys.stdout.write(s[i])
> +
> --
> 1.8.3.4
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |