|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v6 7/9] xl: enable getting and setting soft
Getting happens via `xl vcpu-list', which now looks like this:
# xl vcpu-list -s
Name ID VCPU CPU State Time(s) Affinity (Hard / Soft)
Domain-0 0 0 11 -b- 5.4 8-15 / all
Domain-0 0 1 11 -b- 1.0 8-15 / all
Domain-0 0 14 13 -b- 1.4 8-15 / all
Domain-0 0 15 8 -b- 1.6 8-15 / all
vm-test 3 0 4 -b- 2.5 0-12 / 0-7
vm-test 3 1 0 -b- 3.2 0-12 / 0-7
Setting happens by specifying two pCPU masks to the `xl vcpu-pin'
command, the first one will be hard affinity, the second soft
affinity. If only one mask is specified, it is only hard affinity
that is affected. To change only soft affinity, '-' can be used
as the hard affinity mask parameter, and it will be left alone.
xl manual page is updated accordingly.
Signed-off-by: Dario Faggioli <dario.faggioli@xxxxxxxxxx>
---
Changes from v5:
* change command line interface for 'vcpu-pin', as suggested during
review.
Changes from v4:
* fix and rephrased the manual entry, as suggested during review;
* more refactoring to remove some leftover special casing, as
suggested during review.
Changes from v3:
* fix typos in doc, rephrased the help message and changed
the title of the column for hard/soft affinity, as suggested
during review.
Changes from v2:
* this patch folds what in v2 were patches 13 and 14;
* `xl vcpu-pin' always shows both had and soft affinity,
without the need of passing '-s'.
---
docs/man/xl.pod.1 | 32 ++++++++++++----
tools/libxl/xl_cmdimpl.c | 90 +++++++++++++++++++++++++++++----------------
tools/libxl/xl_cmdtable.c | 2 +-
3 files changed, 84 insertions(+), 40 deletions(-)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 30bd4bf..f646bf6 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -651,16 +651,32 @@ after B<vcpu-set>, go to B<SEE ALSO> section for
information.
Lists VCPU information for a specific domain. If no domain is
specified, VCPU information for all domains will be provided.
-=item B<vcpu-pin> I<domain-id> I<vcpu> I<cpus>
+=item B<vcpu-pin> [I<OPTIONS>] I<domain-id> I<vcpu> I<cpus hard> I<cpus soft>
-Pins the VCPU to only run on the specific CPUs. The keyword
-B<all> can be used to apply the I<cpus> list to all VCPUs in the
-domain.
+Set hard and soft affinity for a I<vcpu> of <domain-id>. Normally VCPUs
+can float between available CPUs whenever Xen deems a different run state
+is appropriate.
-Normally VCPUs can float between available CPUs whenever Xen deems a
-different run state is appropriate. Pinning can be used to restrict
-this, by ensuring certain VCPUs can only run on certain physical
-CPUs.
+Hard affinity can be used to restrict this, by ensuring certain VCPUs
+can only run on certain physical CPUs. Soft affinity specifies a I<preferred>
+set of CPUs. Soft affinity needs special support in the scheduler, which is
+only provided in credit1.
+
+The keyword B<all> can be used to apply the hard and soft affinity masks to
+all the VCPUs in the domain. The symbol '-' can be used to leave either
+hard or soft affinity alone.
+
+For example:
+
+ xl vcpu-pin 0 3 - 6-9
+
+will set soft affinity for vCPU 3 of domain 0 to pCPUs 6,7,8 and 9,
+leaving its hard affinity untouched. On the othe hand:
+
+ xl vcpu-pin 0 3 3,4 6-9
+
+will set both hard and soft affinity, the former to pCPUs 3 and 4, the
+latter to pCPUs 6,7,8, and 9.
=item B<vm-list>
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index fa5ab8e..dd0e53a 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -4584,8 +4584,10 @@ static void print_vcpuinfo(uint32_t tdomid,
}
/* TIM */
printf("%9.1f ", ((float)vcpuinfo->vcpu_time / 1e9));
- /* CPU AFFINITY */
+ /* CPU HARD AND SOFT AFFINITY */
print_bitmap(vcpuinfo->cpumap.map, nr_cpus, stdout);
+ printf(" / ");
+ print_bitmap(vcpuinfo->cpumap_soft.map, nr_cpus, stdout);
printf("\n");
}
@@ -4620,7 +4622,8 @@ static void vcpulist(int argc, char **argv)
}
printf("%-32s %5s %5s %5s %5s %9s %s\n",
- "Name", "ID", "VCPU", "CPU", "State", "Time(s)", "CPU Affinity");
+ "Name", "ID", "VCPU", "CPU", "State", "Time(s)",
+ "Affinity (Hard / Soft)");
if (!argc) {
if (!(dominfo = libxl_list_domain(ctx, &nb_domain))) {
fprintf(stderr, "libxl_list_domain failed.\n");
@@ -4653,17 +4656,32 @@ int main_vcpulist(int argc, char **argv)
return 0;
}
-static int vcpupin(uint32_t domid, const char *vcpu, char *cpu)
+int main_vcpupin(int argc, char **argv)
{
libxl_vcpuinfo *vcpuinfo;
- libxl_bitmap cpumap;
-
- uint32_t vcpuid;
+ libxl_bitmap cpumap, cpumap_soft;;
+ uint32_t vcpuid, domid;
+ const char *vcpu;
char *endptr;
- int i, nb_cpu, nb_vcpu, rc = -1;
+ int opt, nb_cpu, nb_vcpu, rc = -1;
+ libxl_bitmap *soft = &cpumap_soft, *hard = &cpumap;
+ static struct option opts[] = {
+ {"soft", 0, 0, 's'},
+ COMMON_LONG_OPTS,
+ {0, 0, 0, 0}
+ };
libxl_bitmap_init(&cpumap);
+ libxl_bitmap_init(&cpumap_soft);
+ SWITCH_FOREACH_OPT(opt, "", opts, "vcpu-pin", 3) {
+ /* No options */
+ }
+
+ domid = find_domain(argv[optind]);
+ vcpu = argv[optind+1];
+
+ /* Figure out with which vCPU we are dealing with */
vcpuid = strtoul(vcpu, &endptr, 10);
if (vcpu == endptr) {
if (strcmp(vcpu, "all")) {
@@ -4673,10 +4691,27 @@ static int vcpupin(uint32_t domid, const char *vcpu,
char *cpu)
vcpuid = -1;
}
- if (libxl_cpu_bitmap_alloc(ctx, &cpumap, 0))
+ if (libxl_cpu_bitmap_alloc(ctx, &cpumap, 0) ||
+ (argc == 5 && libxl_cpu_bitmap_alloc(ctx, &cpumap_soft, 0)))
goto out;
- if (vcpupin_parse(cpu, &cpumap))
+ /*
+ * Syntax is: xl vcpu-pin <domid> <vcpu> <hard> <soft>
+ * We want to handle all the following cases ('-' means
+ * "leave it alone"):
+ * xl vcpu-pin 0 3 3,4
+ * xl vcpu-pin 0 3 3,4 -
+ * xl vcpu-pin 0 3 - 6-9
+ * xl vcpu-pin 0 3 3,4 6-9
+ */
+ if (argc <= 4 || (argc == 5 && !strcmp(argv[optind+3], "-")))
+ soft = NULL;
+ if (argc == 5 && !strcmp(argv[optind+2], "-"))
+ hard = NULL;
+
+ if (hard && vcpupin_parse(argv[optind+2], &cpumap))
+ goto out;
+ if (soft && vcpupin_parse(argv[optind+3], &cpumap_soft))
goto out;
if (dryrun_only) {
@@ -4687,7 +4722,14 @@ static int vcpupin(uint32_t domid, const char *vcpu,
char *cpu)
}
fprintf(stdout, "cpumap: ");
- print_bitmap(cpumap.map, nb_cpu, stdout);
+ if (hard)
+ print_bitmap(cpumap.map, nb_cpu, stdout);
+ else
+ fprintf(stdout, "-");
+ if (soft) {
+ fprintf(stdout, " ");
+ print_bitmap(cpumap_soft.map, nb_cpu, stdout);
+ }
fprintf(stdout, "\n");
if (ferror(stdout) || fflush(stdout)) {
@@ -4700,43 +4742,29 @@ static int vcpupin(uint32_t domid, const char *vcpu,
char *cpu)
}
if (vcpuid != -1) {
- if (libxl_set_vcpuaffinity(ctx, domid, vcpuid, &cpumap, NULL)) {
- fprintf(stderr, "Could not set affinity for vcpu `%u'.\n", vcpuid);
+ if (libxl_set_vcpuaffinity(ctx, domid, vcpuid, hard, soft)) {
+ fprintf(stderr, "Could not set affinity for vcpu `%u'.\n",
+ vcpuid);
goto out;
}
}
else {
- if (!(vcpuinfo = libxl_list_vcpu(ctx, domid, &nb_vcpu, &i))) {
+ if (!(vcpuinfo = libxl_list_vcpu(ctx, domid, &nb_vcpu, &nb_cpu))) {
fprintf(stderr, "libxl_list_vcpu failed.\n");
goto out;
}
- for (i = 0; i < nb_vcpu; i++) {
- if (libxl_set_vcpuaffinity(ctx, domid, vcpuinfo[i].vcpuid,
- &cpumap, NULL)) {
- fprintf(stderr, "libxl_set_vcpuaffinity failed"
- " on vcpu `%u'.\n", vcpuinfo[i].vcpuid);
- }
- }
+ if (libxl_set_vcpuaffinity_all(ctx, domid, nb_vcpu, hard, soft))
+ fprintf(stderr, "Could not set affinity.\n");
libxl_vcpuinfo_list_free(vcpuinfo, nb_vcpu);
}
rc = 0;
out:
+ libxl_bitmap_dispose(&cpumap_soft);
libxl_bitmap_dispose(&cpumap);
return rc;
}
-int main_vcpupin(int argc, char **argv)
-{
- int opt;
-
- SWITCH_FOREACH_OPT(opt, "", NULL, "vcpu-pin", 3) {
- /* No options */
- }
-
- return vcpupin(find_domain(argv[optind]), argv[optind+1] , argv[optind+2]);
-}
-
static void vcpuset(uint32_t domid, const char* nr_vcpus, int check_host)
{
char *endptr;
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
index 4279b9f..d03c52a 100644
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -218,7 +218,7 @@ struct cmd_spec cmd_table[] = {
{ "vcpu-pin",
&main_vcpupin, 1, 1,
"Set which CPUs a VCPU can use",
- "<Domain> <VCPU|all> <CPUs|all>",
+ "<Domain> <VCPU|all> <Hard affinity|all> <Soft affinity|all",
},
{ "vcpu-set",
&main_vcpuset, 0, 1,
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |