Re: [Xen-devel] [PATCH v3 4/5] x86: Port the basic alternative mechanism from Linux to Xen

["Wu, Feng" <feng.wu@xxxxxxxxx>]

> -----Original Message-----
> From: Jan Beulich [mailto:JBeulich@xxxxxxxx]
> Sent: Tuesday, June 03, 2014 6:00 PM
> To: Wu, Feng
> Cc: andrew.cooper3@xxxxxxxxxx; ian.campbell@xxxxxxxxxx;
> stefano.stabellini@xxxxxxxxxx; keir.xen@xxxxxxxxx; xen-devel@xxxxxxxxxxxxx;
> boris.ostrovsky@xxxxxxxxxx; tim@xxxxxxx
> Subject: Re: [PATCH v3 4/5] x86: Port the basic alternative mechanism from
> Linux to Xen
> 
> >>> On 30.05.14 at 10:56, <feng.wu@xxxxxxxxx> wrote:
> > +#ifdef K8_NOP1
> > +static const unsigned char k8nops[] __initconst = {
> > +    K8_NOP1,
> > +    K8_NOP2,
> > +    K8_NOP3,
> > +    K8_NOP4,
> > +    K8_NOP5,
> > +    K8_NOP6,
> > +    K8_NOP7,
> > +    K8_NOP8
> > +};
> > +static const unsigned char * const k8_nops[ASM_NOP_MAX+1] __initconst =
> {
> > +    NULL,
> > +    k8nops,
> > +    k8nops + 1,
> > +    k8nops + 1 + 2,
> > +    k8nops + 1 + 2 + 3,
> > +    k8nops + 1 + 2 + 3 + 4,
> > +    k8nops + 1 + 2 + 3 + 4 + 5,
> > +    k8nops + 1 + 2 + 3 + 4 + 5 + 6,
> > +    k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7
> > +};
> > +#endif
> > +
> > +#ifdef P6_NOP1
> > +static const unsigned char p6nops[] __initconst = {
> > +    P6_NOP1,
> > +    P6_NOP2,
> > +    P6_NOP3,
> > +    P6_NOP4,
> > +    P6_NOP5,
> > +    P6_NOP6,
> > +    P6_NOP7,
> > +    P6_NOP8
> > +};
> > +static const unsigned char * const p6_nops[ASM_NOP_MAX+1] __initconst =
> {
> > +    NULL,
> > +    p6nops,
> > +    p6nops + 1,
> > +    p6nops + 1 + 2,
> > +    p6nops + 1 + 2 + 3,
> > +    p6nops + 1 + 2 + 3 + 4,
> > +    p6nops + 1 + 2 + 3 + 4 + 5,
> > +    p6nops + 1 + 2 + 3 + 4 + 5 + 6,
> > +    p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7
> > +};
> > +#endif
> 
> The uses of __initconst together with -fPIC cause build problems on
> older gcc. I fixed this up in a temporary way, but put a work item on
> my todo list to deal with this properly while at once converting
> alternative.o to alternative.init.o (as the file consists of only init
> code and data).
> 
> Jan

Thanks a lot for pointing this out. Do I need to do something for this?

Thanks,
Feng


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel