[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3] xen: arm: introduce uImage probe function for Dom0
Hi, Julien, Ian, Stefano - could you please comment on this? As soon as we (GlobalLogic) are going to switch to Xen 4.5 release - we need this patch to be reviewed / merged. We are targeting to have as less local patches as possible. Thank you in advance, Regards, Andrii On Thu, Aug 21, 2014 at 12:48 PM, Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx> wrote: > Patch adds a possibility to boot dom0 kernel from uImage. > This is needed to improve boot-time. Comparing to zImage, > uImage is not packed, therefore we can save time needed > to unpack. > > uImage header format: > http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blob;f=include/image.h > > Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx> > --- > Changed since v1: > * fixed commit message > * added uimage structure definition > * removed checking of the append device tree > > Changed since v2: > * removed "32" in the uimage constants name > * added printing a warning if the uimage 'load' field != 0 > * added checking of the uimage 'arch' field to know the kernel is 32 or 64 > bits > > xen/arch/arm/kernel.c | 94 > +++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 94 insertions(+) > > diff --git a/xen/arch/arm/kernel.c b/xen/arch/arm/kernel.c > index d635a7e..3adc6db 100644 > --- a/xen/arch/arm/kernel.c > +++ b/xen/arch/arm/kernel.c > @@ -16,6 +16,9 @@ > > #include "kernel.h" > > +#define UIMAGE_MAGIC 0x27051956 > +#define UIMAGE_NMLEN 32 > + > #define ZIMAGE32_MAGIC_OFFSET 0x24 > #define ZIMAGE32_START_OFFSET 0x28 > #define ZIMAGE32_END_OFFSET 0x2c > @@ -188,6 +191,95 @@ static void kernel_zimage_load(struct kernel_info *info) > } > } > > +/* > + * Uimage CPU Architecture Codes > + */ > +#define IH_ARCH_INVALID 0 /* Invalid CPU */ > +#define IH_ARCH_ALPHA 1 /* Alpha */ > +#define IH_ARCH_ARM 2 /* ARM */ > +#define IH_ARCH_I386 3 /* Intel x86 */ > +#define IH_ARCH_IA64 4 /* IA64 */ > +#define IH_ARCH_MIPS 5 /* MIPS */ > +#define IH_ARCH_MIPS64 6 /* MIPS 64 Bit */ > +#define IH_ARCH_PPC 7 /* PowerPC */ > +#define IH_ARCH_S390 8 /* IBM S390 */ > +#define IH_ARCH_SH 9 /* SuperH */ > +#define IH_ARCH_SPARC 10 /* Sparc */ > +#define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */ > +#define IH_ARCH_M68K 12 /* M68K */ > +#define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */ > +#define IH_ARCH_NIOS2 15 /* Nios-II */ > +#define IH_ARCH_BLACKFIN 16 /* Blackfin */ > +#define IH_ARCH_AVR32 17 /* AVR32 */ > +#define IH_ARCH_ST200 18 /* STMicroelectronics ST200 */ > +#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) > */ > +#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */ > +#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */ > +#define IH_ARCH_ARM64 22 /* ARM64 */ > +#define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */ > + > +/* > + * Check if the image is a uImage and setup kernel_info > + */ > +static int kernel_uimage_probe(struct kernel_info *info, > + paddr_t addr, paddr_t size) > +{ > + struct { > + __be32 magic; /* Image Header Magic Number */ > + __be32 hcrc; /* Image Header CRC Checksum */ > + __be32 time; /* Image Creation Timestamp */ > + __be32 size; /* Image Data Size */ > + __be32 load; /* Data Load Address */ > + __be32 ep; /* Entry Point Address */ > + __be32 dcrc; /* Image Data CRC Checksum */ > + uint8_t os; /* Operating System */ > + uint8_t arch; /* CPU architecture */ > + uint8_t type; /* Image Type */ > + uint8_t comp; /* Compression Type */ > + uint8_t name[UIMAGE_NMLEN]; /* Image Name */ > + } uimage; > + > + uint32_t start, len; > + > + if ( size < sizeof(uimage) ) > + return -EINVAL; > + > + copy_from_paddr(&uimage, addr, sizeof(uimage)); > + > + if ( be32_to_cpu(uimage.magic) != UIMAGE_MAGIC ) > + return -EINVAL; > + > + start = be32_to_cpu(uimage.load); > + len = be32_to_cpu(uimage.size); > + > + if ( len > size ) > + return -EINVAL; > + > + if ( start == 0 ) > + printk(XENLOG_ERR "uImage start position is not defined\n"); > + > + info->zimage.start = start; > + info->zimage.kernel_addr = addr + sizeof(uimage); > + info->zimage.len = len; > + > + info->entry = info->zimage.start; > + info->load = kernel_zimage_load; > + > +#ifdef CONFIG_ARM_64 > + if ( uimage->arch == IH_ARCH_ARM ) > + info->type = DOMAIN_32BIT; > + else if ( uimage->arch == IH_ARCH_ARM64 ) > + info->type = DOMAIN_64BIT; > + else > + { > + printk(XENLOG_ERR "Not supported uImage arch type %d\n", > uimage->arch); > + return -EINVAL; > + } > +#endif > + > + return 0; > +} > + > #ifdef CONFIG_ARM_64 > /* > * Check if the image is a 64-bit Image. > @@ -398,6 +490,8 @@ int kernel_probe(struct kernel_info *info) > rc = kernel_zimage64_probe(info, start, size); > if (rc < 0) > #endif > + rc = kernel_uimage_probe(info, start, size); > + if(rc < 0 ) > rc = kernel_zimage32_probe(info, start, size); > if (rc < 0) > rc = kernel_elf_probe(info, start, size); > -- > 1.9.1 > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxx > http://lists.xen.org/xen-devel -- Andrii Tseglytskyi | Embedded Dev GlobalLogic www.globallogic.com _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |