|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH V5] Update pvSCSI protocol description
Update the protocol description of the pvSCSI framework used to pass through
SCSI devices to a guest (pv or hvm).
The main changes are:
- added comments
- add support for larger SG-lists by putting them in an own granted page
- deprecate VSCSIIF_ACT_SCSI_SG_PRESET action with related structures
- add ref_rqid for action VSCSIIF_ACT_SCSI_ABORT to be able to specify the
request to abort
- deprecate timeout_per_command as this really should be handled by the
backend in case of default settings or by the guest domain by aborting a
long running command
This update is related to the rework of the pvSCSI backend and frontend drivers
in the Linux kernel. This interface version is included in that rework, too.
Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
Reviewed-by: David Vrabel <david.vrabel@xxxxxxxxxx>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
xen/include/public/io/vscsiif.h | 185 +++++++++++++++++++++++++++++++++++-----
1 file changed, 164 insertions(+), 21 deletions(-)
diff --git a/xen/include/public/io/vscsiif.h b/xen/include/public/io/vscsiif.h
index a50f980..7a1db05 100644
--- a/xen/include/public/io/vscsiif.h
+++ b/xen/include/public/io/vscsiif.h
@@ -1,8 +1,8 @@
/******************************************************************************
* vscsiif.h
- *
+ *
* Based on the blkif.h code.
- *
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to
* deal in the Software without restriction, including without limitation the
@@ -30,11 +30,131 @@
#include "ring.h"
#include "../grant_table.h"
-/* commands between backend and frontend */
-#define VSCSIIF_ACT_SCSI_CDB 1 /* SCSI CDB command */
-#define VSCSIIF_ACT_SCSI_ABORT 2 /* SCSI Device(Lun) Abort*/
-#define VSCSIIF_ACT_SCSI_RESET 3 /* SCSI Device(Lun) Reset*/
-#define VSCSIIF_ACT_SCSI_SG_PRESET 4 /* Preset SG elements */
+/*
+ * Feature and Parameter Negotiation
+ * =================================
+ * The two halves of a Xen pvSCSI driver utilize nodes within the XenStore to
+ * communicate capabilities and to negotiate operating parameters. This
+ * section enumerates these nodes which reside in the respective front and
+ * backend portions of the XenStore, following the XenBus convention.
+ *
+ * Any specified default value is in effect if the corresponding XenBus node
+ * is not present in the XenStore.
+ *
+ * XenStore nodes in sections marked "PRIVATE" are solely for use by the
+ * driver side whose XenBus tree contains them.
+ *
+ *****************************************************************************
+ * Backend XenBus Nodes
+ *****************************************************************************
+ *
+ *------------------ Backend Device Identification (PRIVATE) ------------------
+ *
+ * p-devname
+ * Values: string
+ *
+ * A free string used to identify the physical device (e.g. a disk name).
+ *
+ * p-dev
+ * Values: string
+ *
+ * A string specifying the backend device: either a 4-tuple "h:c:t:l"
+ * (host, controller, target, lun, all integers), or a WWN (e.g.
+ * "naa.60014054ac780582").
+ *
+ * v-dev
+ * Values: string
+ *
+ * A string specifying the frontend device in form of a 4-tuple "h:c:t:l"
+ * (host, controller, target, lun, all integers).
+ *
+ *--------------------------------- Features ---------------------------------
+ *
+ * feature-sg-grant
+ * Values: unsigned [VSCSIIF_SG_TABLESIZE...65535]
+ * Default Value: 0
+ *
+ * Specifies the maximum number of scatter/gather elements in grant pages
+ * supported. If not set, the backend supports up to VSCSIIF_SG_TABLESIZE
+ * SG elements specified directly in the request.
+ *
+ *****************************************************************************
+ * Frontend XenBus Nodes
+ *****************************************************************************
+ *
+ *----------------------- Request Transport Parameters -----------------------
+ *
+ * event-channel
+ * Values: unsigned
+ *
+ * The identifier of the Xen event channel used to signal activity
+ * in the ring buffer.
+ *
+ * ring-ref
+ * Values: unsigned
+ *
+ * The Xen grant reference granting permission for the backend to map
+ * the sole page in a single page sized ring buffer.
+ *
+ * protocol
+ * Values: string (XEN_IO_PROTO_ABI_*)
+ * Default Value: XEN_IO_PROTO_ABI_NATIVE
+ *
+ * The machine ABI rules governing the format of all ring request and
+ * response structures.
+ */
+
+/* Requests from the frontend to the backend */
+
+/*
+ * Request a SCSI operation specified via a CDB in vscsiif_request.cmnd.
+ * The target is specified via channel, id and lun.
+ *
+ * The operation to be performed is specified via a CDB in cmnd[], the length
+ * of the CDB is in cmd_len. sc_data_direction specifies the direction of data
+ * (to the device, from the device, or none at all).
+ *
+ * If data is to be transferred to or from the device the buffer(s) in the
+ * guest memory is/are specified via one or multiple scsiif_request_segment
+ * descriptors each specifying a memory page via a grant_ref_t, a offset into
+ * the page and the length of the area in that page. All scsiif_request_segment
+ * areas concatenated form the resulting data buffer used by the operation.
+ * If the number of scsiif_request_segment areas is not too large (less than
+ * or equal VSCSIIF_SG_TABLESIZE) the areas can be specified directly in the
+ * seg[] array and the number of valid scsiif_request_segment elements is to be
+ * set in nr_segments.
+ *
+ * If "feature-sg-grant" in the Xenstore is set it is possible to specify more
+ * than VSCSIIF_SG_TABLESIZE scsiif_request_segment elements via indirection.
+ * The maximum number of allowed scsiif_request_segment elements is the value
+ * of the "feature-sg-grant" entry from Xenstore. When using indirection the
+ * seg[] array doesn't contain specifications of the data buffers, but
+ * references to scsiif_request_segment arrays, which in turn reference the
+ * data buffers. While nr_segments holds the number of populated seg[] entries
+ * (plus the set VSCSIIF_SG_GRANT bit), the number of scsiif_request_segment
+ * elements referencing the target data buffers is calculated from the lengths
+ * of the seg[] elements (the sum of all valid seg[].length divided by the
+ * size of one scsiif_request_segment structure). The frontend may use a mix of
+ * direct and indirect requests.
+ */
+#define VSCSIIF_ACT_SCSI_CDB 1
+
+/*
+ * Request abort of a running operation for the specified target given by
+ * channel, id, lun and the operation's rqid in ref_rqid.
+ */
+#define VSCSIIF_ACT_SCSI_ABORT 2
+
+/*
+ * Request a device reset of the specified target (channel and id).
+ */
+#define VSCSIIF_ACT_SCSI_RESET 3
+
+/*
+ * Preset scatter/gather elements for a following request. Deprecated.
+ * Keeping the define only to avoid usage of the value "4" for other actions.
+ */
+#define VSCSIIF_ACT_SCSI_SG_PRESET 4
/*
* Maximum scatter/gather segments per request.
@@ -42,11 +162,20 @@
* Considering balance between allocating at least 16 "vscsiif_request"
* structures on one page (4096 bytes) and the number of scatter/gather
* elements needed, we decided to use 26 as a magic number.
+ *
+ * If "feature-sg-grant" is set, more scatter/gather elements can be specified
+ * by placing them in one or more (up to VSCSIIF_SG_TABLESIZE) granted pages.
+ * In this case the vscsiif_request seg elements don't contain references to
+ * the user data, but to the SG elements referencing the user data.
*/
#define VSCSIIF_SG_TABLESIZE 26
/*
- * based on Linux kernel 2.6.18
+ * based on Linux kernel 2.6.18, still valid
+ *
+ * Changing these values requires support of multiple protocols via the rings
+ * as "old clients" will blindly use these values and the resulting structure
+ * sizes.
*/
#define VSCSIIF_MAX_COMMAND_SIZE 16
#define VSCSIIF_SENSE_BUFFERSIZE 96
@@ -58,26 +187,38 @@ struct scsiif_request_segment {
};
typedef struct scsiif_request_segment vscsiif_segment_t;
+#define VSCSIIF_SG_PER_PAGE (PAGE_SIZE / sizeof(struct scsiif_request_segment))
+
+/* Size of one request is 252 bytes */
struct vscsiif_request {
uint16_t rqid; /* private guest value, echoed in resp */
uint8_t act; /* command between backend and frontend */
- uint8_t cmd_len;
-
- uint8_t cmnd[VSCSIIF_MAX_COMMAND_SIZE];
- uint16_t timeout_per_command; /* The command is issued by twice
- the value in Backend. */
- uint16_t channel, id, lun;
- uint16_t padding;
- uint8_t sc_data_direction; /* for DMA_TO_DEVICE(1)
- DMA_FROM_DEVICE(2)
- DMA_NONE(3) requests */
- uint8_t nr_segments; /* Number of pieces of scatter-gather */
+ uint8_t cmd_len; /* valid CDB bytes */
+
+ uint8_t cmnd[VSCSIIF_MAX_COMMAND_SIZE]; /* the CDB */
+ uint16_t timeout_per_command; /* deprecated: timeout in secs, 0=default
*/
+ uint16_t channel, id, lun; /* (virtual) device specification */
+ uint16_t ref_rqid; /* command abort reference */
+ uint8_t sc_data_direction; /* for DMA_TO_DEVICE(1)
+ DMA_FROM_DEVICE(2)
+ DMA_NONE(3) requests */
+ uint8_t nr_segments; /* Number of pieces of scatter-gather */
+/*
+ * flag in nr_segments: SG elements via grant page
+ *
+ * If VSCSIIF_SG_GRANT is set, the low 7 bits of nr_segments specify the number
+ * of grant pages containing SG elements. Usable if "feature-sg-grant" set.
+ */
+#define VSCSIIF_SG_GRANT 0x80
vscsiif_segment_t seg[VSCSIIF_SG_TABLESIZE];
uint32_t reserved[3];
};
typedef struct vscsiif_request vscsiif_request_t;
+/*
+ * The following interface is deprecated!
+ */
#define VSCSIIF_SG_LIST_SIZE ((sizeof(vscsiif_request_t) - 4) \
/ sizeof(vscsiif_segment_t))
@@ -89,10 +230,12 @@ struct vscsiif_sg_list {
vscsiif_segment_t seg[VSCSIIF_SG_LIST_SIZE];
};
typedef struct vscsiif_sg_list vscsiif_sg_list_t;
+/* End of deprecated interface */
+/* Size of one response is 252 bytes */
struct vscsiif_response {
- uint16_t rqid;
- uint8_t act; /* valid only when backend supports SG_PRESET */
+ uint16_t rqid; /* identifies request */
+ uint8_t act; /* deprecated: valid only if SG_PRESET supported */
uint8_t sense_len;
uint8_t sense_buffer[VSCSIIF_SENSE_BUFFERSIZE];
int32_t rslt;
--
1.8.4.5
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |