Re: [Xen-devel] [V3 3/3] amd/seattle: Initial revision of AMD Seattle support

[Julien Grall <julien.grall@xxxxxxxxxx>]

Hi Suravee,

On 02/10/2014 22:25, suravee.suthikulpanit@xxxxxxx wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
>
> This patch add inital (minimal) platform support for AMD Seattle,
> which mainly just define the matching ID, and specify system_off,
> and system_reset mechanism.
>
> Initially, the firmware only support a subset of PSCI-0.2 functions,
> system-off and sytem-reset. The mechanism for bring up auxiliary processors
> is still using spin-table.
I forgot to ask, did you check that the grant-table mapping (by default 
mapped 0xb0000000-0xb0020000) doesn't overlap to the RAM or another 
device on your platform?
If it's the case I would define .dom0_gnttab_start and .dom0_gnttab_size.

Regards,

> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
> ---
>   xen/arch/arm/platforms/Makefile  |  1 +
>   xen/arch/arm/platforms/seattle.c | 65 ++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 66 insertions(+)
>   create mode 100644 xen/arch/arm/platforms/seattle.c
>
> diff --git a/xen/arch/arm/platforms/Makefile b/xen/arch/arm/platforms/Makefile
> index 680364f..e1fde6e 100644
> --- a/xen/arch/arm/platforms/Makefile
> +++ b/xen/arch/arm/platforms/Makefile
> @@ -3,4 +3,5 @@ obj-$(CONFIG_ARM_32) += exynos5.o
>   obj-$(CONFIG_ARM_32) += midway.o
>   obj-$(CONFIG_ARM_32) += omap5.o
>   obj-$(CONFIG_ARM_32) += sunxi.o
> +obj-$(CONFIG_ARM_64) += seattle.o
>   obj-$(CONFIG_ARM_64) += xgene-storm.o
> diff --git a/xen/arch/arm/platforms/seattle.c b/xen/arch/arm/platforms/seattle.c
> new file mode 100644
> index 0000000..d298393
> --- /dev/null
> +++ b/xen/arch/arm/platforms/seattle.c
> @@ -0,0 +1,65 @@
> +/*
> + * xen/arch/arm/seattle.c
> + *
> + * AMD Seattle specific settings
> + *
> + * Suravee Suthikulpanit <suravee.suthikulpanit@xxxxxxx>
> + * Copyright (c) 2014 Advance Micro Devices Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <asm/platform.h>
> +#include <asm/psci.h>
> +
> +static const char * const seattle_dt_compat[] __initconst =
> +{
> +    "amd,seattle",
> +    NULL
> +};
> +
> +/* Seattle firmware only implements PSCI handler for
> + * system off and system reset at this point.
> + * This is temporary until full PSCI-0.2 is supported.
> + * Then, these function will be removed.
> + */
> +static noinline void seattle_smc_psci(register_t func_id)
> +{
> +    asm volatile(
> +        "smc #0"
> +        : "+r" (func_id)
> +        :);
> +}
> +
> +static void seattle_system_reset(void)
> +{
> +    seattle_smc_psci(PSCI_0_2_FN_SYSTEM_RESET);
> +}
> +
> +static void seattle_system_off(void)
> +{
> +    seattle_smc_psci(PSCI_0_2_FN_SYSTEM_OFF);
> +}
> +
> +PLATFORM_START(seattle, "SEATTLE")
> +    .compatible = seattle_dt_compat,
> +    .reset      = seattle_system_reset,
> +    .poweroff   = seattle_system_off,
> +PLATFORM_END
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel