Re: [Xen-devel] [PATCH V2 0/4] Add Broadcom 7445D0 A15 board support

[Jonathan Fraser <jfraser@xxxxxxxxxxxx>]

On Fri, 2014-10-03 at 11:29 +0100, Ian Campbell wrote:
> On Thu, 2014-10-02 at 18:16 -0400, Jon Fraser wrote:
> > Version 2
> > 
> > This patch series adds support for the Broadcom A15 boards based on the
> > 7445D0 SoC. These changes only affect this single platform.
> > 
> > The existing code for .init.proc.info  and early UART support have been 
> > updated
> > from chip version C0 to D0.  Versions before D0 are not supported.
> > 
> > I believe I've addressed all of Julien's comments on brcm.c in the previous 
> > version.
> > 
> > Jon Fraser (4):
> >   xen/arm: Broadcom 7445D0 ARM cpu support.
> >   xen/arm: Update early print console UART address for Broadcom 7445D0.
> >   xen/arm: Add support for Broadcom 7445D0 A15 platform.
> >   xen/arm/docs:  Document Broadcom 7445D0 early printk support
> 
> All acked + applied.
> 
> When reposting please could you collect any acked-/reviewed-by which
> were given from the previous round (assuming you haven't made major
> changes) into the commit log.
> 
> Also FWIW we would normally update the docs in the same patch as
> updating the feature.
> 

I was unsure of the protocol for previously reviewed patches in a
series.  I didn't merge the doc patch with the previous in case it had
already been applied.


Thanks
Jon

> > 
> >  docs/misc/arm/early-printk.txt  |   1 +
> >  xen/arch/arm/Rules.mk           |   2 +-
> >  xen/arch/arm/arm32/proc-v7.S    |   4 +-
> >  xen/arch/arm/platforms/Makefile |   1 +
> >  xen/arch/arm/platforms/brcm.c   | 294 
> > ++++++++++++++++++++++++++++++++++++++++
> >  5 files changed, 299 insertions(+), 3 deletions(-)
> >  create mode 100644 xen/arch/arm/platforms/brcm.c
> > 
> 
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel