[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH V3] docs, amd_ucode: Add AMD container file format notes

This patch introduces documentation notes about AMD container
file formats and where to obtain latest container files from.

Also, We provide a how-to for updating patch level by
concatenating container files along with initrd images.
Misc notes about how Xen handles two containers of same
kind (if/when) they are concatenated together are also included.

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@xxxxxxx>
Changes in V3: (inputs from Boris)
 - condense steps listed to apply ucode using initrd
 - condense 'Misc notes' section

Changes in V2:
 - Boris suggested the format part itself is probably better suited
   in linux-firmware tree. There was also another idea about getting
   it out as a separate vendor doc rather than hanging it off of a
   repository. Since this is still WIP, I have removed the ascii art
   about the container file format itself here.
   - I shall update docs with links to relevant documentation as and
     when it is available.
 - Including patch header format (as suggested by Boris)
 - Provide more accurate description of what was meant by "deadlock"
   (as suggested by Boris)

 docs/misc/amd-ucode-container.txt | 88 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 docs/misc/amd-ucode-container.txt

diff --git a/docs/misc/amd-ucode-container.txt 
new file mode 100644
index 0000000..f275252
--- /dev/null
+++ b/docs/misc/amd-ucode-container.txt
@@ -0,0 +1,88 @@
+AMD Microcode Container File format
+  Aravind [dot] Gopalakrishnan [at] amd [dot] com
+Initial version:
+  July 2014
+  October 2014
+Intro to AMD Container Files:
+* Beginning with processor family 10h, AMD provides microcode patch support.
+* There is one single file (container file) containing all microcode patches
+  for AMD families 10h - 14h processors. [microcode_amd.bin]
+* For AMD family 15h processors there is a separate container file. 
+* Microcode patches are not incremental, therefore you only need to make
+  sure you have the latest container file for your AMD processor family.
+* One can find the latest AMD microcode containers from [1], [2]
+Mutual Exclusivity Rule of AMD containers:
+* The patches for families 10h - 14h are guaranteed to be only on
+  microcode_amd.bin
+* Similarly, patches for family 15h will only be on microcode_amd_fam15h.bin
+* This is because, the processes and scripts used to create container files
+  ensure that there is no mix-up
+Microcode patch header structure:
+struct __packed microcode_header_amd {
+    uint32_t data_code;
+    uint32_t patch_id;
+    uint8_t  mc_patch_data_id[2];
+    uint8_t  mc_patch_data_len;
+    uint8_t  init_flag;
+    uint32_t mc_patch_data_checksum;
+    uint32_t nb_dev_id;
+    uint32_t sb_dev_id;
+    uint16_t processor_rev_id;
+    uint8_t  nb_rev_id;
+    uint8_t  sb_rev_id;
+    uint8_t  bios_api_rev;
+    uint8_t  reserved1[3];
+    uint32_t match_reg[8];
+More details about microcode patch header are typically not exposed to public.
+Apply microcode updates using initrd:
+Initrd images can be modified to contain AMD microcode containers in cpio
+format at the start of the image.
+Following example shows how to generate a combined initrd
+Note: initrd-<val> could be different on your machine. Substitute accordingly
+Example System base: Ubuntu 13.04 with 3.8.0-30-generic kernel
+1.  mkdir initrd-for-xen-with_append
+2.  cd initrd-for-xen-with_append
+3.  mkdir -p kernel/x86/microcode
+4.  cat /lib/firmware/amd-ucode/microcode_amd.bin \
+        /lib/firmware/amd-ucode/microcode_amd_fam15h.bin > \
+       kernel/x86/microcode/AuthenticAMD.bin 
+5.  find . | cpio -o -H newc > ucode.cpio
+6.  cat ucode.cpio /boot/initrd.img-3.8.0-30-generic > 
+7. On grub.cfg, provide the above initrd name as module.
+   i.e 'module /boot/initrd_for_xen_with_ucode'
+8. Use 'ucode=scan' option as Xen boot parameter.
+Misc Notes:
+It is not recommended to concatenate two(or more) container files of
+the same kind. (e.g. two microcode_amd_fam15h.bin) since the hypervisor
+will apply a patch as and when it determines that it is a 'good fit'.
+Once the patch is applied, further parsing of the file is skipped.
+Therefore, if a subsequent container file has a newer/updated patch, that 
+patch will be ignored.
+In cases where users are not sure about provenance of containers 
+they should obtain a "good" set  by downloading them from source links
+[1], [2] since it's not guaranteed that the latest patch will be applied.
+[1] http://www.amd64.org/microcode.html
+[3] http://lxr.free-electrons.com/source/Documentation/x86/early-microcode.txt

Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.